Used Pallet for sale (6,620)

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 800 kg, total length: 538 mm, drive type: Elektro, construction width: 726 mm, Low-lift pallet truck Load center: 600 Mast type: None Technical condition: very good Front tire type: Polyurethane Front tire condition: 100% Rodpfs Agda Sox Airjch Rear tire type: Polyurethane Rear tire condition: 100% Battery voltage: 24V Battery capacity: 225Ah Battery year of manufacture: 2019 Description: Used unit, refurbished by Toyota, including new inspection and new certification according to FEM (formerly UVV). Impulse control, CE certificate.

Condition: used, functionality: unexamined, machine/vehicle number: F20324L00162, Year of construction: 2022, operating hours: 1,305 h, load capacity: 1,400 kg, lifting height: 1,844 mm, free lift: 895 mm, fuel type: electric, mast type: duplex, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), Equipment: CE marking, full service history, STILL EXV14I Li-Ion Pallet truck – not refurbished, condition as shown in the pictures. Technical specifications: - NiHo mast - Lifting height 1,844 mm Rsdpfxs Agchdj Airoch - Collapsed height 1,415 mm - Vulkollan tires, single rollers - Forks 1150 mm - Initial lift Additional equipment: - Non-regenerated 24V/4.73kWh lithium-ion battery Discover the reliable STILL forklifts that will optimize your warehouse processes and increase the efficiency of your intralogistics. Visit still.pl to learn about the full specifications, check available models, and choose an intelligent solution tailored to your business. STILL Polska offers flexible rentals of modern forklifts, perfectly suited for the operation of any warehouse. Short-term rentals at STILL Polska provide immediate support for your business during peak seasons and in the event of sudden equipment failures. Choose from a range of modern, readily available forklifts and benefit from flexible terms, comprehensive service support, and a guarantee of uninterrupted operation.

Condition: ready for operation (used), This pre-owned Jungheinrich Esmena pallet racking system is a compact, high-capacity heavy-duty rack designed for industrial storage requirements. The modular high-bay racking is ideally suited for logistics operations, industrial facilities, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet rack system provides an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 5,040 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow, painted - Uprights: approx. 400 x 105 cm, pre-assembled - Upright color: blue, painted - Levels: floor + 2 - Pallet positions: 162 incl. floor positions - Version: Used Jungheinrich Esmena DELIVERY SCOPE: - 019 x uprights (approx. 400 x 105 cm), pre-assembled - 072 x beams (approx. 270 cm) - 144 x locking pins Price: €3,530.00 net €4,200.70 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner carrier – freight costs depend on your postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - We can also inspect existing heavy-duty racks from other manufacturers PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether it's a new installation, modification, or expansion – we provide professional advice for your racking configuration. Redpfx Aio Af Sb Toroch SHOWROOM: Feel free to visit us in our showroom! On-site, you can get a comprehensive view of our pallet racking, storage racks, and other solutions. Many systems are assembled and available for direct inspection. Our experts are happy to assist you with questions and personalized advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers & product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily via message or phone call. You will find our telephone number on our company page. ☎️ You can reach us by phone Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty rack designed for demanding industrial storage applications. Its modular high-bay construction makes it ideally suited for logistics centers, industrial operations, large warehouses, and forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 6,000 kg, this immediately available racking system offers an efficient storage solution for Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 825 cm - Depth: approx. 105 cm - Length: approx. 5,040 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: painted yellow - Uprights: approx. 825 x 105 cm, pre-assembled - Upright color: painted blue - Levels: floor + 4 - Pallet spaces: 270 including floor locations - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 19 x uprights (approx. 825 x 105 cm), pre-assembled Rcjdpfx Aij Af R Tporeh - 144 x beams (approx. 270 cm) - 176 x safety pins Price: 5,730.00 € net 6,818.70 € gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery in Germany via our partner freight forwarder – shipping costs depend on the postal code - Professional installation and dismantling by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer tailored to your specific requirements. Whether new installations, conversions, or expansions – we offer expert advice for your racking configuration. SHOWROOM: You are welcome to visit our showroom! Experience our pallet racks, storage shelves and other solutions in person. Many systems are on display and can be viewed directly. Our expert advisors are happy to assist you with any questions or to provide tailored advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. Our phone number is available on our company page. ☎️ We are available by phone Monday through Friday from 8:00 am to 4:00 pm. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2023, Cell manufacturing year: 2023 Maximum stacking height: 2200 mm Performance: up to 12 cartons/minute Number of robots: 1 Robot: YASKAWA Motoman PL80 Robot manufacturing year: 2022 Rcjdjz Snw Rspfx Aireh Serial number: 295-11-1 Number of robot axes: 5 Robot payload: 80 kg Robot weight: 560 kg Gripping system: vacuum gripper Interlayer magazine: 1 unit, with side access Transport system: roller conveyor with carton centering Safety devices: robot cell with safety light curtain

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, META MULTIPAL-S heavy-duty pallet racking, used, for sale, 80 Euro pallets, 3.80 m, Waltrop Description Used heavy-duty pallet racking system META MULTIPAL-S for sale. The system has 80 pallet spaces for Euro pallets, 9 upright frames, and 40 crossbars. The storage racking is a pallet racking system of the MULTIPAL-S type, manufactured in 2007, in very good condition and fully functional. When installed, 20 pairs of crossbars create 4 spaces each, resulting in a total of 80 spaces on the uprights. Screws and safety devices are included. Dimensions: field width 3,600 mm, racking depth 800 mm, frame height 3,800 mm. Upright frame SR 85/20, frame height 3,800 mm. Rcodpfx Ajzmu Rusireh The racking system is suitable for warehouses, retail, and workshops. It will be sold as a complete unit and is available for immediate delivery. Inspection is possible in 45731 Waltrop, North Rhine-Westphalia, by appointment. The racks have already been disassembled and can be collected on site. Price: €2,690 net, negotiable, plus VAT. Additional photos available upon request.

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm; industrial pallets and quarter pallets can be wrapped as well, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels Rcedpjzzz Rdjfx Airoh - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 4,700 h, load capacity: 1,600 kg, fuel type: electric, battery capacity: 250 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 497 kg, total length: 1,700 mm, total width: 720 mm, fuel: electricity, LINDE T 16 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 1.600 kg Fork length: 1.150 mm Rcsdpfx Aisz R Ugdereh Drive: Elektro 24V Battery: 24 V 250 Ah v. 2020 Charger: 24 V Tyres: Polyurethan Mono Service weight: 497 kg Length: 1.700 mm Width: 720 mm Year of manufacture: 2020 Operating hours: 4.700 h Condition: working condition Internal no.: 1309304 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, machine/vehicle number: IC1555, Year of construction: 2021, operating hours: 1,613 h, load capacity: 1,600 kg, fuel type: electric, mast type: other, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 98320149 Rcjdpfxs Afa Rzs Aireh

Condition: used, Year of construction: 2016, Overview This Haloila Octopus Compact is an automatic rotary-ring stretch wrapper for palletised loads, built in 2016 by Oy M. Haloila Ab in the inline version. It is sold together with its pallet roller conveyor with pallet lifter and its control cabinet. The machine was specified for wrapping barrels and canisters on pallets, is in very good condition and fully functional, and has been out of production since July 2024. It is still installed and under power and can be inspected on site. The rotating ring carries the film carriage around the stationary pallet, so the load itself is never turned - a compact layout suited to lines where the pallet runs straight through the winder on the conveyor. Technical data - Manufacturer: Haloila - Model: Octopus Compact, inline version - Year of manufacture: 2016 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Designed output: 32 pallets per hour (reference pallet height 1,200 mm, 14 wraps per pallet, double wrapping) - Pallet formats: 1,000 x 1,200 mm, Euro 800 x 1,200 mm and special 1,200 x 1,200 mm - Load: up to 1,200 x 1,200 mm, height 500 to 1,200 mm, up to 1,000 kg - Conveyor: roller conveyor, height 390 mm, speed 15 m/min, effective width 1,285 mm, roller pitch 166 mm, Movimot geared motors - Film carriage: AC-powered, pre-stretch up to 230 % Rcodjz R Sxdjpfx Airoh - Film seaming: heat-seal pad - Power supply: 3 x 400 V, 50 Hz + N + PE - Connected load: 4 kW - Rated current: 10 A - CE mark on the machine plate Equipment - Rotating ring with film carriage and film pre-stretch unit - Roping device - Pallet roller conveyor through the winder, with chain transfer section and pneumatic pallet lifter with sensors - Photoelectric sensors for pallet and load height detection, photocells for load position - Control cabinet and touchscreen operator panel (German), signal tower - Signal exchange interface (DP/DP coupler) for connection to a line control - Safety fencing around the wrapping zone, safety light curtains at infeed and outfeed with muting - Restart push-buttons at the infeed Condition Used, very good condition and fully functional. Out of production since July 2024. Sold without warranty. Availability Available immediately. The machine is still installed: dismantling and loading are to be arranged by the buyer. The matching oil filling line from the same site can also be offered on request. Location: Germany.

Condition: used, machine/vehicle number: IC1552, Year of construction: 2021, operating hours: 3,703 h, load capacity: 2,000 kg, lifting height: 2,010 mm, fuel type: electric, mast type: simplex, enginetype: Electric, manufacturer: Jungheinrich Rsdpfx Aie Afa Rujrjch Serial Number: 98313210

Condition: used, machine/vehicle number: IC1545, Year of construction: 2021, operating hours: 7,720 h, load capacity: 2,200 kg, lifting height: 2,100 mm, fuel type: electric, mast type: simplex, construction height: 1,430 mm, fork length: 1,190 mm, front tire size: x, rear tire size: x, enginetype: Electric, manufacturer: Jungheinrich Rcodpo Adxarsfx Airsh Serial Number: 98311220

Condition: used, This Crown electric high-lift pallet truck will be auctioned off online as part of our industrial auction / machine auction – site closure – former porcelain factory Triptis | tools | pallet racking | storage boxes | forklifts. Rodpfx Ao Af Iw Soirsch You can find this and many other items on our platform.

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty racking solution for industrial storage requirements. The modular high-bay racking is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy loading units. Redpfx Aio Af Scuorjch PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 3,080 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam colour: yellow painted - Uprights: approx. 400 x 105 cm, pre-assembled - Upright colour: blue painted - Levels: Floor + 2 - Pallet spaces: 99 including floor positions - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 12 x Uprights (approx. 400 x 105 cm), pre-assembled - 44 x Beams (approx. 270 cm) - 88 x Safety pins Price: €2,200 net €2,618 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner carriers – freight costs depending on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding quote – tailored to your specific requirements. Whether new construction, conversion, or expansion – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On site, you can get an in-depth look at our pallet racking, shelving systems, and other storage solutions. Many systems are assembled and ready for demonstration. Our specialist advisors are available to answer your questions and provide individual consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am to 4:00 pm. Alternatively, send us a message with your name and number, and we will get in touch with you as soon as possible.

Condition: good (used), Year of construction: 2020, operating hours: 1,555 h, load capacity: 1,600 kg, fuel type: electric, empty load weight: 500 kg, mileage: 1,555 km, - Electric pallet truck - Brand: Still (Germany) - Year of manufacture: 2020 Rodpfx Aiey Sa Dyerjch - 1,555 operating hours - Capacity: 1,600 kg - Suitable for Euro pallets - Battery - with automatic filling system - INTERNAL charger

Condition: used, machine/vehicle number: IC1537, Year of construction: 2020, operating hours: 4,618 h, load capacity: 2,000 kg, fuel type: electric, mast type: other, enginetype: Electric, manufacturer: Jungheinrich Rcsdps Afa Rhofx Airsh Serial Number: 98293789

Condition: used, JCB 409 SV wheel loader, year of manufacture: 2022, operating hours: only 890h!, quick coupler, tilting bucket, pallet fork: 1,200 mm, engine: [54.5 kW / 75 hp], weight: 5,730 kg, German vehicle, first owner, good condition, ready for immediate use. Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! BSS, quick-change system, road approval = Further information = Year of manufacture: 2022 Operating hours: 890 Please contact Tobias Ebert for further information. Rjdpfx As Aftq Ijirjch

Condition: new, Pallet forks. Fork length: 1200 mm Width: 150 mm Straight, well-maintained forks. Condition: New. Rodpo Af Spyefx Airoch

Condition: used, machine/vehicle number: IC1549, Year of construction: 2021, operating hours: 1,437 h, load capacity: 2,200 kg, fuel type: electric, mast type: other, battery voltage: 24 V, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 98310916 Redpfxj Adxa Sj Airsch Battery Details: 24v 200ah

Condition: new, Year of construction: 2021 Rcedpfx Ais Af Skxorjh

Condition: used, machine/vehicle number: IC1543, Year of construction: 2021, operating hours: 1,563 h, load capacity: 1,000 kg, lifting height: 2,500 mm, fuel type: electric, mast type: simplex, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 90636971 Rcjdpfxs Adxafo Airsh

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty rack designed to meet demanding industrial storage requirements. The modular high-bay racking is ideally suited for logistics centers, industrial operations, large warehouses, and freight forwarding companies. With a load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy loading units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 1,400 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow powder-coated - Frames: approx. 400 x 105 cm, pre-assembled - Frame color: blue powder-coated - Levels: Floor + 2 - Pallet spaces: 45 including ground level - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 06 x frames (approx. 400 x 105 cm), pre-assembled - 20 x beams (approx. 270 cm) - 40 x locking pins Rcodpfx Ais Af Sarjreh Price: €1,060.00 net €1,261.14 gross An invoice with VAT shown separately will be issued. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner hauliers – shipping costs depend on delivery postcode - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly provide you with a non-binding offer – tailored exactly to your requirements. Whether for new builds, upgrades or expansions – we will support you with expert advice on your racking configuration. SHOWROOM: Visit us in our showroom! Experience our pallet racking, warehouse shelving, and other storage solutions firsthand. Many systems are assembled for live demonstration. Our experts are available for your questions and individual consultation – we look forward to welcoming you! Haven’t found the right solution yet? Visit our website for a quick overview of many more products and variations! INTERESTED OR HAVE QUESTIONS? Contact us by message or phone – our telephone number can be found on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Year of construction: 2026, CORMAK WRHS 1610 Mast Pallet Truck is a professional device designed for fast and efficient lifting and transporting of heavy loads in warehouses, production halls, and other industrial environments. Thanks to its advanced construction and high-quality components, this mast pallet truck provides reliability, efficiency, and safety during daily operations. Its main advantages are a high load capacity and significant lifting height, making it an ideal solution for handling pallets and working as a pallet stacker in various industrial applications. Main advantages of the WRHS 1610 mast pallet truck The WRHS 1610 mast pallet truck has been designed for demanding users who require durability, high performance, and operational safety. Its robust construction and functional solutions make it an essential tool for warehouse operations. Key benefits: High load capacity – a maximum lifting capacity of 1000 kg allows the truck to handle heavy pallets and large-sized loads efficiently. Lifting height of 1600 mm – enables convenient storage of goods on warehouse racks, helping to optimize available storage space. Polyurethane wheels – high-quality wheels provide smooth movement, quiet operation, and long service life, even under demanding warehouse conditions. Ergonomic design – the mast and handle are designed for operator comfort, allowing easy handling while reducing physical strain. Durable and stable construction – the strong steel mast ensures stability during lifting and lowering operations, guaranteeing reliable and safe performance. Construction and technology of the WRHS 1610 mast pallet truck The WRHS 1610 mast pallet truck combines high-quality workmanship with modern technical solutions. Mast construction The mast is made of high-quality steel, providing excellent resistance to mechanical damage. Its rigid design ensures load stability and safe transportation during lifting operations. Wheels and rollers The truck is equipped with durable polyurethane wheels with dimensions of 180 × 50 mm and fork rollers measuring 74 × 70 mm. These components ensure smooth, quiet, and stable movement on various types of surfaces. Ergonomic operator handle The manual control handle has been designed to provide comfortable operation and easy maneuvering, even in narrow warehouse aisles. Rcodpfsricgajx Airoh Advanced lifting system The WRHS 1610 features: Two lifting options: manual and foot-operated lifting Stepless fork lowering speed adjustment Truck locking system Brakes on both steering wheels for improved safety and stability during operation Standard equipment Load capacity: 1000 kg Lifting height: 1600 mm Steel mast with reinforced construction Polyurethane steering wheels Fork rollers for smooth movement Manual and foot-operated lifting system Adjustable fork lowering speed Locking system and brakes on both steering wheels Ergonomic operating handle Technical specifications Parameter Value Load capacity 1000 kg Lifting height 1600 mm Fork dimensions (L × W) 1150 × 145 mm External fork width 550 mm Distance between forks 230 mm Height with lowered forks 1970 mm Height with raised forks 1970 mm Minimum fork height 90 mm Overall length 1630 mm Overall width 740 mm Turning radius 1400 mm Steering wheels 180 × 50 mm Fork rollers 74 × 70 mm Weight 181 kg

Condition: good (used), operating hours: 4,490 h, load capacity: 2,000 kg, fuel type: electric, empty load weight: 2,022 kg, mileage: 4,490 km, - Electric pallet truck - Brand: Still (Germany) - Year of manufacture: 2022 - 4,490 operating hours - Capacity: 2,000 kg Rcsdsz Rznaopfx Airoh - Fork length: 2,400 mm - Battery - Includes charger - Automatic filling system

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Rjdpfx Aisz Ipx Hsrsch Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.