Used Panel Saw Panel Saw for sale (16,650)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1000031582, cutting length (max.): 3,800 mm, saw blade diameter: 350 mm, cutting width (max.): 3,800 mm, saw blade bore: 65 mm, throughput speed: 417 mm/s, TECHNICAL DETAILS Saw blade diameter min.: 200 mm Saw blade diameter max.: 350 mm Saw blade bore diameter: 65 mm Max. cutting length: 3,800 mm Giodpfx Ahox Rbkro Hel Max. cutting width: 3,800 mm Number of feed clamps: 6 Max. feed rate: 25 m/min MACHINE DETAILS Electrical data Main motor power: 18.0 kW Voltage: 400 V Current consumption: 36 A Power: 18.0 kW Dimensions & weight Dimensions (L x W x H): 6,050 x 1,750 x 2,400 mm Weight: 5,000 kg Transport packages: 3 pcs. EQUIPMENT Documentation CE marking Optiplanning software – Easy version, SOPHIA services

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 220.242, cutting length (max.): 4,300 mm, saw blade diameter: 350 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Maximum saw blade diameter (S): 350 mm Scoring blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Additional Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Overall height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at feed-in) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Saw carriage forward speed: 5 – 120 m/min Saw carriage return speed: 120 m/min Giodpfxsx Sqpms Ah Hel Feed-in forward speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Feed-in return speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: excellent (used), Catalogue number: 7791 TECHNICAL SPECIFICATIONS - max diameter of main blade with scorer: 350mm - max cutting height: 105mm - main blade adjustable up/down + tilt - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on the sliding table: 1430mm - cutting width at rip fence: 1000mm - with side table - with scorer - max scorer diameter: 80mm - scorer spindle diameter: 20mm - main motor: 5.5kW - extraction port diameter: 100mm - table dimension: 115x625mm - table size with extension and widening: 2150x1105mm - blade guard - 3 blade speeds: 3200/4500/6000rpm - dimensions (L/W/H): 2300x3350x1520mm - weight: 746kg Gedpfx Ahsxpvk Ie Hoil Net price: 11,900 PLN Net price: 2,830 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: new, functionality: fully functional, TECHNICAL DATA: - Maximum horizontal cutting length: 2500 mm - Maximum vertical cutting length: 2200 mm Gedpfx Ahjx S Egao Hsil - Maximum vertical cutting height: 1600 mm - Maximum horizontal cutting height: 1400 mm - Maximum cutting thickness: 60 mm - Motor power: 5 HP (3.7 kW) - Blade diameter: 250 mm - Blade speed: 5300 rpm

Condition: used, Year of construction: 2003, Cutting range: 5300 x 2240 x 80 mm Motor: 5.5 kW (7.5 HP) Saw blade: 300 mm Vertical cutting distance: 1000 mm Feed speed: 10-25 m/min Four-sided edging Independent pre-scoring saw unit Storage location: Supplier Giodpox Twdaefx Ah Hol

Condition: used, Year of construction: 1992, functionality: fully functional, 1 unit Panel Saw TK UNIVER SVP 950M Operating hours: 1054h, as per pictures and inspection, self-dismantling Color: green Gedjx Szycjpfx Ah Heil Year of manufacture: 1992 Dimensions (L/W/H): 600x250x80 cm Condition: used Payment method: advance bank transfer Storage location: joinery/workshop hall 1 Shipping: Collection only – no shipping available for this item!

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting length (max.): 2,200 mm, cutting width (max.): 4,300 mm, TECHNICAL DETAILS Max. cutting length: 2,200 mm Max. cutting width: 4,300 mm MACHINE DETAILS Transport packages: 8 pcs. Giedpfxox Tptme Ah Hsl

Condition: excellent (used), Year of construction: 2007, Machine Data: Holzma HPP 380/43/43 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rails (2-track element): 9 pcs Clamps: 7 pcs, first 3 clamps: 2-finger type Air cushion table width: 650 mm / 1 x 800 mm (4 pcs), each 2810 mm length Gisdpjx Sd Sujfx Ah Hsl Central blower: 1 unit, high output version POWER-CONCEPT TYPE PROFILINE HPP/L 380 – 1 ‘Power-Concept’ clamp (3-finger type) – 3 skew-lift clamps (2-finger type) – 1 skew-lift clamp (1-finger type) – 1st air cushion table, 800 mm wide – Speed package: saw carriage feed rate 1 – 150 m/min Technical Data: Saw blade protrusion: 95 mm Saw carriage feed rate: forward 1-130 m/min, reverse fixed at 130 m/min Automatic cutting height adjustment Angle alignment device, min. pressure width: 0 mm, max. pressure width: full cutting length Main saw motor: 21 kW, frequency-controlled Scoring saw motor, type VVSH vertical upstroke: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control with 17" flat display Labelling with part graphics / label program / label printer PICA 104 Grooving program

Condition: used, Year of construction: 1998, Used machine Gedpfx Aox Sttnsh Hsil Year of manufacture: 1998 Equipment and technical specifications: - Cutting length: 3400 mm - Cutting width: 1300 mm, CNC-controlled - Motor: 5.5 kW - Automatic brake - Digital display for cutting width - Digital display for tilting - Digital speed display - Digital display for mitre fence - Scoring unit: electric H+S F45 - RAPIDO scoring system - Automatic guard control - Parallelogram guard device F45 - Table extension: 800 mm - CE version - Anodised version Availability: approx. mid-April 2026 Location: Hesse

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Giedju Rqq Hopfx Ah Hol Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Giodpfx Ahsx Twcvs Hol

Condition: good (used), Saw unit, sawing unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit cutting depth 60 mm -Saw blade: Ø 250 mm -Engine: Fimec H71SE -Power: 3 kW Godpfx Ahswqmfuo Hsil -Speed: 2800 rpm -Transport dimensions: 455/455/H420 mm -Weight: 27 kg

Condition: excellent (used), IM Very good condition. Gjdpow An Ubsfx Ah Hsil

Condition: used, Year of construction: 1991, Cutting length 3100 mm Cutting height 45 mm Gedor I E Hcopfx Ah Heil Motor output 1,8 kW dimensions 4000 x 500 x 920 mm weight 450 kg

Condition: excellent (used), Striebig in very good condition 5200x2200 mm, 80 mm, from Swiss small business Godpfx Asx Aq H Djh Hjil

Condition: good (used), Year of construction: 1982, functionality: fully functional, For sale: vertical panel saw, manufacturer Holzher, model 1215. Good, well-maintained condition, fully operational. Available from March 2026. Further information available via email or telephone. Private sale, therefore no returns, no warranty, and no liability. The sale is made with the exclusion of any warranty. No shipping. Giodpex Tcukjfx Ah Hsl

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Gijdpfoxg Igiox Ah Hjl

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw Giedpfohfufgex Ah Hjl -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 0-341-07-8874, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 72 mm, saw blade diameter: 350 mm, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, main saw diameter: 350 mm, total length: 5,800 mm, total height: 2,000 mm, total width: 6,410 mm, Equipment: scorer, Panel beam saw HOLZMA type HPP 32/32/L Left side execution machine Main motor 7,5 kW Pre-cutting unit, motor 1,1 kW Gisdpfx Ahox Sap No Hel Central side pressure device with infinitely adjustable side pressure 3 "air" tables: size 1800x600 mm 6 pcs of grippers: 3 pcs double finger stop; 3 pcs single finger stops Label printer Software for cut plan optimalization Software for CSV import

Condition: excellent (used), Catalogue number: 7853 TECHNICAL DATA - Max. diameter of main saw blade without scorer: 400mm - Max. diameter of main saw blade with scorer: 350mm - Main blade adjustment (height/tilt): electric - Arbor diameter: 30mm - Arbor lock - Sliding table included - Side carriage + angle stop included - Sliding table length: 3000mm - Cutting width at rip fence: 1350mm - Side carriage included - Scoring unit included - Max. scorer blade diameter: 120mm - Scoring motor power: 0.75kW - Main motor power: 6kW - Motor for height adjustment: 0.25kW - Motor for tilt adjustment: 0.25kW - Three spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220x650mm - Table extension: 1920x1450mm - Large blade guard - Extraction port diameters: 80mm, 125mm - Machine dimensions (LxWxH): 3500x3460x1500mm - Weight: 1000kg Giedpex H S Tiefx Ah Hol ADVANTAGES – Manufactured in Poland – Equipped with scoring unit – DTR documentation + CE certificate – Used saw, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Kölle Positiomat 3 axes electric table 1500 mm Gijdpov Uk Atsfx Ah Hol

Condition: used, Year of construction: 2000, Cutting width: 5300 mm Cutting height: 2200 mm Processing depth: 80 mm Fence: digital Feed: automatic Saw blade diameter: 300 mm Saw blade speed: 4750 rpm. Free-standing Location: Nattheim Gsdpfx Ahjx Akuuj Hsil

Condition: used, Year of construction: 1988, Cutting width: 5,300 mm Trimming height: 1,950 mm Cutting depth: 80 mm Saw unit swiveling: 90° Motor power: 4.6 kW Saw blade speed: approx. 4,420 rpm Saw blade diameter: 300 mm Weight: approx. 1,200 kg Storage location: Nattheim Giedex Rb Scepfx Ah Hsl

Condition: used, Year of construction: 2004, Cutting length: 5300 mm, cutting height: 2200 mm, motor: 4.0 kW, cutting depth: 60 mm, saw blade: 250 mm D. Storage location: Nattheim. Gijdpfexr A Nvjx Ah Hsl

Condition: used, Year of construction: 1999, Cutting width: 5300 mm Cutting height: 1910 mm Gijdpfx Asxzu Euoh Hol Storage location: Nattheim