Used Panhans 261 for sale (87)

Condition: excellent (used), Year of construction: 1995, used, in good condition, low hours, top equipment Manufacturer: Panhans Model: 116H Year of manufacture: 1995 Machine No.: 640 GS wood dust tested 2-lever operation Drill chuck 20 mm Dowel boring device with 4 stops Bdjdjxgu Uajpfx Abteg 45° continuously adjustable mitre fence Mobile 2 pneumatic workpiece clamps Pneumatic height adjustment with foot pedal Extraction connection D 100 mm Required space approx. 950 mm x 1000 mm x 1300 mm Weight approx. 200 kg Storage location: 54634 Bitburg, free loaded, unpacked Handover in current condition as inspected without guarantee or warranty

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity Bdodpeq H Sqdjfx Abteg GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: used, Year of construction: 1994, - Cutting length: 5800 mm - Cutting width: 5150 mm Bdedpszuy D Aefx Abtsg - Main saw power: 11 kW - Scoring saw power: 1.5 kW Panel dividing saw Manufacturer: Panhans Type: 693 / EURO 30 Year of manufacture: 1994 Technical data: - Cutting length: 5800 mm - Cutting width: 5150 mm - Main saw power: 11 kW - Scoring saw power: 1.5 kW - Rear support table (divided): 1 piece, 370 x 4910 - Rear support beams (with rollers): 9 pieces, 40 x 4910 mm - Front sliding support table (with 3 infeed rollers on the end): 3 pieces, 600 x 1800 - Miter table: adjustable - Air cushion miter table: adjustable - Angle table: left - Air cushion table left: up to 2020 mm - Clamping jaws: 7 pieces, floating Scoring jaws: 4 pieces Special accessories: Color screen, graphics, online I Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2001, machine/vehicle number: 6028, functionality: fully functional, input voltage: 400 V, cutting width (max.): 1,200 mm, saw blade diameter: 4,000 mm, height adjustment type: hydraulic, rotational speed (max.): 6,000 rpm, rotational speed (min.): 3,000 rpm, length stop: 3,200 mm, table length: 3,200 mm, trimming length: 2,000 mm, Machine no: 6028 Types: 690 B 3000,4000,5000,6000 rpm Power: 3/400V/50Hz Motor: 5.5 Kw Bdodpfx Abovl Icrstog Table 2000X400 mm

Condition: used, Year of construction: 1991, machine/vehicle number: 2549, power: 4.7 kW (6.39 HP), input voltage: 380 V, input current: 17 A, input frequency: 50 Hz, spindle diameter: 30 mm, actuation type: manual, PANHANS TYPE 250, Fixed Spindle Milling Machine Used machine Serial No. 2549, Year of manufacture 1991 Item number: JA_G260503 Description Spindle diameter: 30 mm Vertical adjustment: 120 mm Quick-change spindle: MK 5 Adjustment: manual Table ring max.: 270 mm Table size: 1100 x 760 mm Table height: 870 mm Frame support: yes Swiveling: ----- Adjustment: ----- Milling stop: manual Power 400V / 50 Hz: 4.7/5.7 kW Speed: 3/4.5/6/9000 rpm Weight approx.: 610 kg Dust extraction: 120 + 120 mm Dimensions LWH: 2300 x 1100 x 1100 mm Condition / Work performed • Machine cleaned • Machine functionality tested • Age-related and usage-related signs of wear • Available from stock Errors and changes to the technical specifications are subject to change. Note on used goods: • Prices are quoted as pick-up prices (unless otherwise stated!) from our location in Ottendorf-Okrilla/Germany - free loading! (unless otherwise specified) • Subject to prior sale! • You will receive an invoice with VAT (MwSt.) shown. • All items are sold as is, without any warranty claims. The buyer is free to inspect the items at our location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Any items in the background of the image are not included in the scope of supply. • Saw blades are for illustrative purposes only and are not included in the scope of supply. Shipping options: • We will gladly provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla is possible and free of charge by arrangement. (Assembly and demonstration of the goods are optional and can be arranged.) Bodpey Uxbvofx Abtjdg • Optionally, our trained service personnel can assemble the machine at your location and provide you with a brief instruction. Travel, transport and service times are subject to an additional charge.

Condition: good (used), Year of construction: 1993, functionality: fully functional, operating hours: 7,120 h, cutting height (max.): 100 mm, cutting width (max.): 4,500 mm, saw blade diameter: 400 mm, overall weight: 3,000 kg, cutting length (max.): 4,500 mm, cutting height with scoring (max.): 100 mm, cutting width at rip fence: 3,200 mm, main saw diameter: 400 mm, Equipment: scorer, A well-preserved machine with few working hours. It has been operated by a private customer since new. Bodpfx Aevvhfhsbtjdg

Condition: good (used), Year of construction: 2007, Surface planer Bjdpfx Aswkf Hksbtedg Model Panhans PA 51 Year of manufacture 2007 Planing width 510 mm Cutter block with 4 strip knives Feed table length 1180 mm Discharge table length 1180 mm Motor 4.0 kW / 400 V

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Features and technical specifications: - Control display on the upper control panel - Control panel can be swivelled and extended - Swivelling milling spindle - Swivel range of the milling spindle: +/- 45° - Milling spindle stroke: 150 mm - HSK80 quick-change milling spindle system - Milling arbor 30 mm - Electromechanical spindle locking mechanism - Frame support 1,340 mm at the machine table, extendable by approx. 700 mm - Table extension on the right - Table extension on the left - 2-axis positioning control for height and swivel adjustment, digital LED displays - Voltage 400 V / 50 Hz - Power socket - Automatic motor start via contactor control Bedpfxszk N Sbe Abtjdg - 7.5 kW main motor, frequency-controlled / continuously variable speed control - Milling stop type 203 with handwheel adjustment on both sides - Centrex Type 1624 milling protection and clamping device - ZEROMASTER reference dimension setting device - Wegoma Variomatic 4N feed unit: 4-roller feed unit Variable feed speed 2–18 m/min Clockwise and anti-clockwise rotation Suitable for both horizontal and vertical use Memo-Lock system for easy swivelling and repositioning Digital height display Height adjustment from the operator’s side Generously sized locking levers Maximum reach 1,050 mm thanks to extended tube - Dimensions: 260 x 180 x 130 cm - Weight: approx. 1,100 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1980, Spindle swivels: No Height adjustment: Handwheel Milling vice adjustment: Manual Height indicator: Scale Milling stop indicator: Scale Bsdpfx Abszdzb Ietedg Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000, speed indicator defective Motor power: 5 / 6 kW Motor brake: Yes Dust extraction port: 120 mm Machine length: 2500 mm Machine depth: 900 mm Weight: 800 kg

Condition: repair required (used), Year of construction: 1991, Tilting spindle moulder Manufacturer: Panhans Model: 240 Year of manufacture: 1991 The electronic angle value detection (actual value) is not functional. Table: 135 x 80 cm Power: 11 kW Tilting range: -5° to +45° Angle adjustment: Electric Height adjustment: Electric Spindle speeds: 3/4.5/6/9,000 rpm Left/right rotation: Yes Motor brake: Yes Weight: approx. 780 kg Bdjdpfx Asx Tgtwobteg Incl. power feed

Year of construction: 2000, condition: used, Milling stop adjustment: via handwheel Milling stop measurement display: Siko counter Bdsdpfx Absy A Hi Rjtsg Milling jaws adjustment: handwheel Milling jaws measurement display: Siko counter

Condition: good (used), For sale is a used Panhans milling machine Type 245 with 8 milling speeds. The machine has been inspected and refurbished by our qualified staff and is in good condition. Technical data: - Double swiveling unit - Swiveling range -45° to +45° - Electrically height-adjustable and swiveling - Overhead control panel Bedpfx Aboy Nncfjtsdg - 8 milling speeds - Direction of rotation switch - Motor power 11 kW / 15 HP - Year of manufacture 2002 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, router, milling Reference: R-S1632

Condition: used, Year of construction: 1979, Spindle tiltable: No Height adjustment: Handwheel Cutter jaw adjustment: Manual Height indicator: Scale Fence indicator: Scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000, speed display defective Bodsyffx Uepfx Abtsdg Motor power: 5 / 6 kW Motor brake: Yes, manual Extraction connection: 120 mm Machine length: 2500 mm Machine depth: 900 mm Weight: 800 kg

Condition: used, Year of construction: 1989, 3 St. 110 mm Weight 30 kg Used Machine Year of Manufacture: 1989 Features and Technical Specifications: - Type 76 feed unit for table saws and panel saws of various makes - For safe cutting of solid wood strips, planks, window stiles, etc. - With adjustable mounting profile, 3 feed rollers, and 2 fixed speeds Bdsdpfx Ajzr Rqzsbtsg - Quick adjustment to workpiece height via a handwheel - With dust extraction connection for dust-free operation, including plug - With rail for mounting heights from 18 to 40 mm - Quick and easy (tool-free) installation and removal - Transparent, swing-away guard for optimal visibility and ergonomic operation when cutting moldings - Supply voltage: 400 V / 50 Hz - Weight: approx. 30 kg

Condition: new, Year of construction: 2024, Exhibition Machine Year of Construction: 2024 Equipment and Technical Data: Robust German engineering for trimming, cross-cutting, formatting, mitre cutting, etc. - Top-mounted control panel at eye level, swiveling, incl. fence guide - 7" touchscreen control for the electromotive positioning of cutting height, saw blade swivel adjustment, cut width stop and optionally for the height and side adjustment of the scoring saw Auto-EPS. Tool database for 50 saw blades and display of the current speed. - Electromotive height and swivel adjustment - Swivel range of the saw blade from 0 to 47° - APA saw blade quick clamping system - Speed of main saw blade 3000/4000/5000/6000 rpm - Protective device that can be swiveled away on both sides, safety guard with interchangeable insert wide/narrow for saw blades up to Ø 450 mm - Width stop with a cutting width of 1250 mm, electromotive - Trolley with a cutting length of 3200 mm and locking every 50 mm - Cross slide with support roller and adjustable extension in both directions. Length stop with mm scale and extension up to 3500 mm with 2 adjustable folding stops and 1 end stop, simultaneously usable as an angle mitre stop on both sides, infinitely adjustable from 0-46° with automatic length compensation and detent for 15°, 22.5°, 30°, 45° fixable. - Push-button control with electronic soft start (start/stop) - Electronic, maintenance-free motor brake - Cutting length 3200 mm - Cutting height max. 155 mm at 90°, 105 mm at 47° - Cutting width at the width stop 1250 mm, electromotive - Length stop on the cross slide extendable up to 3500 mm - Max. saw blade Ø 450 mm, saw blade Ø 400 mm can be lowered under the table - Table size of the cast iron table top 1200 x 665 mm - plus table extension 750 x 655 mm - Table extension 1430 x 940 mm - Table height / working height 900 mm - Extraction connection 120 mm on the machine body, 80 mm on the safety guard - Motor power 5.5 kW / 7.5 HP - Electrical voltage 400 V / 50 Hz - Trolley, length and width stop profiles anodized - Machine body and swivel arm powder-coated in anthracite RAL 7021, cladding sheet safety guard on top in violet blue RAL 5000, on the machine body in light gray RAL 7035 - Footprint: 7110 x 4150 mm - Weight: approx. 1050 kg depending on the model, up to 1250 kg - CE compliant, GS tested, BG-wood dust tested Bsdpfxjw I Umms Abtodg Special equipment: Incl. scoring unit 0.55 kW, electromotive positioning for side and height adjustment via LED display and memory function; when the scoring saw is switched on, the unit automatically moves to the set position values; when switched off, the unit automatically moves under the table into a lateral parking position, so that larger saw blades than Ø 350 mm can also be used without removing the scoring saw blades. Incl. THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW Incl. Quickstep scoring system: Tool-free manual adjustment of the scoring width From 2.8 to 3.8 mm by incremental adjustment by 0.05 mm per step, incl. 1 set of saw blades 125 x 2.8-3.8 x 50 mm Z = 12+12 Incl. SWIVELING DEVICE FOR THE CROSS SLIDE Quick and ergonomic sliding into the parking position Incl. Length stop with digital display mounted on each stop flap, adjustable to 0.1 mm, length max. 3300 mm

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN -used- PC control with optimization, scoring unit, automatic cut length detection, side pressure device, air cushion tables, Bsdpfx Aoyrqrtobtjdg movable tables, infinitely variable feed rate of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, Cutting width: 4,200 mm, Max. cutting height: 72 mm, Number of clamps: 6 pcs, Feed rate saw unit max.: 100 m/min, Feed rate for width stop max.: 80 m/min, Main saw motor power: 11 kW, Scoring saw motor power: 1.5 kW, Main saw blade Ø: 300 x 30 mm, Scoring saw blade Ø: 180 x 30 mm, Extraction port Ø bottom: 140 mm, Extraction port Ø on pressure beam: 3x100 mm, Airflow volume: 5,000 m³/h, Compressed air connection: 6 bar, Air consumption: 140 l/min, Nominal current: 38 A, Max. circuit breaker: 50 A Quality information: - complete basic inspection - complete basic cleaning - Electrics checked - immediately ready for operation

Condition: used, Year of construction: 1998, Used, in top condition Make: Panhans Model: 76 Year of manufacture: 1998 Machine No.: 648 Original price approx. €4,800.00 Bjdpfjxuv Nzjx Abtjdg Location: 97447 Gerolzhofen, loaded free, unpacked Handover in as-inspected condition, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 6,000 rpm, section length (max.): 3,450 mm, TECHNICAL DETAILS Maximum cutting height: 155 mm Maximum cutting height at 45°: 105 mm Bdodpfx Absyx Et Hstog Maximum cutting width: 1,250 mm Maximum cutting length: 3,450 mm Maximum saw blade diameter: 450 mm Bore diameter: 30 mm Saw blade tilt range: 0 - 46° Speeds: 3,000 / 4,000 / 5,000 / 6,000 rpm Sliding table length: 3,200 mm Scorer: Auto-EPS with motorized positioning for lateral and height adjustment Cross carriage: Standard, with 3 digital flip stops, extendable up to 3,500 mm Rip fence: Motorized control, with positioning control to 0.1 mm MACHINE DETAILS Motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,300 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Electrical axis control Sliding table completely readjusted Ruler carrier replaced with new system, featuring 3 flip stops Stainless steel scale for angle adjustment renewed Cross carriage checked Longitudinal fence with 90° locking completely replaced Machine electrically inspected Machine completely readjusted, checked, and lubricated Note: The specified data are partially taken from manufacturer's brochures or documents and may differ from the actual values.

Condition: used, Year of construction: 1987, Second-hand machine Year of manufacture: 1987 Condition: fully overhauled Features and technical specifications: - Table dimensions 1100 x 760 mm - Motor 4.7/5.7 kW, pole-changing Bsdpfxozk Nzij Abtjdg - with clockwise/anti-clockwise rotation - MK 5/30 mm milling arbor - Height and swivel adjustment via handwheel - Speed settings: 3000/4500/6000/9000 rpm - Swivel range of the milling spindle – 5 to +45° - Milling stop with metal jaws - mounted on a round insert plate and therefore rotatable through 360° - with table extension on both sides, featuring extendable frame supports - with 4-roller feed mechanism Weight approx. 900 kg The images show the machine in its pre-refurbishment condition Availability: approx. 4 weeks after order placement Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Bsdpsvi H Disfx Abtedg Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: used, Year of construction: 1984, Second-hand machine Year of manufacture: 2007 Features and technical specifications: - Motor 4.7/5.7 kW, pole-changing - with clockwise/anti-clockwise rotation - MK 5/30 mm milling arbor - Height adjustment via handwheel - Speeds: 3000/4500/6000/9000 rpm - Milling stop with metal jaws Mounted on a round turntable and therefore rotatable through 360° - with table extension on both sides, featuring extendable frame supports - with a roller table attached to the left-hand side Please note! The table extension was fitted at a later date! To use the roller table, it must this must be removed again! Bedpfezk N R Rjx Abtedg - with 4-roller feed mechanism, built in 2007 - Dimensions: 240x65x120 - Weight approx. 900 kg Availability: at short notice Location: 63934 Röllbach

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Equipment and technical data: - Solid German machine construction - Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor - Travel device for greater mobility - Cast iron table 700 x 380 mm thick-walled and highly ribbed - 2 manual eccentric clamps with solid steel columns for clamping the workpieces - Smooth-running cross support with adjustable ball guides for lateral and depth adjustment - 2-lever operation - Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via left and right side stops - Drill motor power 1.3/1.7 kW, pole-changing, speed 1500/3000 rpm with mechanical motor brake and practical tool tray - incl. emergency stop button - High-precision two-jaw drill chuck with protective sleeve, clamping range 1-20 mm - Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller high-precision milled raster, fixed via spring-loaded raster bolt - Plug-in frame stop with index bolt for the positions: center, left, right Mitre fence, plug-in with index bolt for 45° and 22.5° - Workpiece fence up to 1500 mm for series processing - CE-compliant, GS tested - Max. Drilling depth 145 mm - Max. Drilling length 240 mm - Height adjustment 135 mm - Clamping range 5-20 mm - Motor power 1.3 / 1.7 kW - Voltage 400 V / 50 Hz - Suction nozzle 100 mm Ø - Color RAL 7035 light grey and RAL 5000 violet blue Special equipment: - Dial gauge in the handwheel, with 0.1 mm height adjustment display instead of the scale - Single-lever operation with remote locking for longitudinal and transverse movement of the drill motor including loosening and locking of the raster bolt on the dowel drilling device, narrow workpieces can then also be processed from the side of the table Bsdpsw I Uzkefx Abtjdg - Emergency stop button with key - Safety cover over the drill chuck with electric lock New price with this equipment 12213. Shipping dimensions: 120x80x160 cm Weight: approx. 200 kg Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 1989, with electrical height and swivel adjustment   used, great condition Panhans make Type 688 Year of manufacture 1989 Machine no. 287 GS-approved Motor 5.5 kW brake Cutting width approx. 1250 mm Cutting length approx. 2700 mm swiveling up to 45 ° Scoring unit Bdsdpfx Aevxr Sqjbteg Parallelogram protection Electric height adjustment Electric swivel adjustment Angle stop as a miter stop Extraction connection D 120 mm / 80 mm Required space approx. 2800 mm x 3400 mm x 1400 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without overhaul, without guarantee and warranty

Condition: used, Year of construction: 1994, with Supergehrfixangle mitre fenceused, good conditionmake Panhanstype 690year of construction 1994machineNo. 1286GS wood dust testedmotor 5.5 kWsteel guidescarriage length approx. 3200 mmcutting width approx. 1250 mmswivel up to 45°scoring unitparallelogram protectiontable top extensionhydraulic height adjustmenthydraulic swivel adjustmentdigital display:- cutting angleangle stop as mitre fence with length compensation / super mitre fixsuction connection D 120/80 mmspace requirement approx. 3200 mm x 3700 mm x 1700 mmWeight approx. 1000 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loadingHandover as is, as inspectedwithout guarantee and warranty Bdodpfx Asvxr Npebtsg

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Planing width: 630 mm Planing height: 3 - 300 mm Maximum cutting depth: 8 mm Table length: 1100 mm Cutterhead speed: 5000 rpm Feed motor power: 0.55 / 0.75 kW / 0.8 / 1.0 HP Extraction port Ø 160 mm, usable on left and right Feed speed: 7 + 14 m/min Main motor power: 7.5 kW / 10 HP Voltage: 400 V / 50 Hz Space requirement approx. 1070 x 1200 x 1060 mm Net weight approx. 1050 kg TECHNICAL DESCRIPTION Robust German engineering. For thickness planing with a planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions. PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives. Pendulum-mounted feed rollers. Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and secure workpiece feed. With segmented pressure bar. Electric height adjustment of the thicknessing table, tilt-resistant on 4 trapezoidal thread spindles. With finely planed thickness table. Positioning control 4.3" touchscreen. Automatic star-delta start. Mechanical motor brake. Extraction port 160 mm, usable on left and right. Machine calibrated at the factory. CE compliant GS tested Standard equipment as follows: Bdjdoy Eizuopfx Abtjg Solid steel cutterhead with 4 Tersa reversible knives Standard quality for 630 mm planing width Rubber infeed roller Rubber outfeed roller Thickness table without table glide rollers Positioning control 4.3" touchscreen 2 feed speeds 7 + 14 m/min Touch panel 4.3" Location: Flörsheim Availability: Immediately