Used Milling Spindle for sale (16,993)

Condition: good (used), Spindle / Spindle 3.5 - 16 - 10 kVA 2750 - 14660 - 23660 rpm Hsdpep I T Rqefx Abzjw Inspection is possible by prior appointment at my warehouse!

Condition: excellent (used), Year of construction: 2022, Tilting spindle moulder with sliding table FELDER Model F 700 Z Sliding table length: 1000 mm Motor power: 5.5 kW Motor voltage: 3 x 400 V, 50 Hz Spindle tilting range: 90 - 45 degrees Spindle diameter: 30 mm Spindle speed: 3500/6500/8000/10000 rpm Hsdpfx Aewu D A Esbzjw Table opening: 230 mm Extraction port diameter: 120/80 mm CE Note for used machines: • Errors in technical specifications and prior sale excepted. • Listed prices are ex-location – free loading! • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: used, Motor 6 / 7.5 kW Location: Supplier Hjdpfx Abjw Enw Iozjw

Condition: used, Year of construction: 2025, Spindle tiltable: Yes, -5 to 45° Height adjustment: manual / handwheel Spindle stroke: 142 mm Tilting adjustment: manual / handwheel Fence adjustment: manual Height display: scale Tilting angle display: scale Milling fence display: scale Spindle diameter: 30 mm Spindle length: 140 mm Max. tool diameter: 250 mm Speeds: 3500 / 6000 / 8000 / 10000 rpm Motor power: 5.3 kW Motor brake: Yes, automatic Table size: 1000 mm x 520 mm Sliding carriage length: 1200 mm Extraction connection: 2 x 120 mm Machine length: approx. 1200 mm Machine width: approx. 900 mm Hjdpfoxrbihsx Abzow Weight: 400 kg

Condition: good (used), Year of construction: 2002, Robust Tilting Spindle Moulder T 26, tiltable from -45 to +45 degrees with 2-axis position control Duocontrol Tilting spindle moulder in excellent specification A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Height adjustment max. 150mm, electric adjustment When adjusting the height, the correction factor for the tilting angle is shown in the upper display, which can then be set on the stop, allowing settings according to drawings Four spindle speeds: 3,000, 4,500, 6,000, and 9,000 rpm Spindle diameter 30mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of height and fence Fence with lifting device can be swung away (for curved milling work) Table opening adjustable via eccentric table rings, electric adjustment Table extension on right and left with pull-out workpiece support Support can be extended by up to 700mm Table length approx. 2400mm Hinged fence for plunge routing Original Martin aluminium fence jaws with two bridges Aigner Centrex workpiece pressure device 3-roller power feed HolzHer 1117, with 8 speeds, reversible, new rollers Power feed socket, switchable from the control panel Extraction port 2 x 120mm Compressed air connection 6bar Emergency stop switch Some parts of the machine have been newly painted Hedpfx Abevv H T Rjzjw Approx. 7,400 operating hours Operating instructions CE marking Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier."

Condition: excellent (used), Year of construction: 2020, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions With Aigner integral fence and 3-roller power feed - Machine in as-new condition - Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle assembly mounted on the table Especially sturdy design Smooth operation thanks to precision components and high dead weight Standard right/left spindle rotation with electronic lockout when changing direction 5 speeds from 3000 to 10,000 rpm Hsdpjxac Eysfx Abzow Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron table for lasting precision Easy operation thanks to controls and speed display on the front of the machine Standard fence with fine adjustment and aluminium fence jaws Powerful industrial motors Equipment details: Moulder fence Moulder fence adjustment with crank/wheel from the front With digital readout Quick-change spindle MK 4 quick-change spindle standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting work Scope of delivery: Manually tiltable spindle from +45° to -45° Speed indication via LED on the front Aluminium fence jaws Curved cutter guard Right/left rotation of the spindle MK 4 quick-change spindle Moulder fence with crank/wheel adjustment from the front with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model CASADEI F 25 LL FK Item no. 5220728 Technical Data Working table dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. profiling tool diameter: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5 steps: 3000/4500/6000/8000/10000 rpm Motor power: 400 V / 50 Hz / S6-40% 7 kW Weight: 480 kg Extraction port diameter at fence: 1 x 120 mm Extraction port diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 2007, Tilting spindle moulder Utis CSN Digital & stand for feed unit, feed unit by Maggi Italy Hjdpfewudlysx Abzow Year of manufacture 2007

Condition: good (used), Year of construction: 1999, functionality: fully functional, height adjustment type: electric, table height: 860 mm, table length: 2,000 mm, power: 75 kW (101.97 HP), table width: 800 mm, total height: 860 mm, type of input current: AC, total length: 2,000 mm, total width: 1,200 mm, spindle diameter: 30 mm, pivoting range: 45 °, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1,500 rpm, overall weight: 920 kg, workpiece weight (max.): 1,060 kg, opening width: 370 mm, input voltage: 400 V, rotational speed (min.): 10,000 rpm, clamping height: 125 mm, rotational speed (max.): 10,000 rpm, Machine no: 128-29225 Type: TFS 2000 Built in 1999. Engine: 7.5 Kw Hodpfxsvn Rb Ae Abzow Suva matic

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Hsdjv Ai N Uopfx Abzew Storage location: Nattheim

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering, upon request/order, a refurbished table router, type FZ0 by F. Zimmermann. Here are the machine's technical specifications: Worktable: 590 x 420 mm Rotary movement: 360° Tilting: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: collet chuck with clamping nut Ø 8 mm - CE marking - Vernier stop - Plexiglas milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. With the machine, you will also receive an angle table and a set of milling tools – in other words, a complete setup! VAT is itemized separately on the invoice. Shipping available at an additional charge. Current delivery time: 6 weeks If you have any questions, please feel free to contact us! Hsdpfxjxlzg He Abzsw

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Hsdjxbq Ulepfx Abzow Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg

Condition: new, Year of construction: 2025, Sturdy cast steel construction With rigid milling spindle 3 spindle speeds 3500 to 10000 min¯¹ Milling spindle with right-left rotation Large dimensioned milling unit made of grey cast iron, directly mounted to the table With suction hood under the worktable for better extraction Solid and precise cast iron table Quick and easy speed change Powerful motor with 5,0 kW Standard arc milling protection hood Quality Made in Italy Equipment details Cast iron milling unit Directly mounted on the milling table Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors equipped with powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. The integrated suction connection ensures a clear view Milling table opening A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Curved milling protection hood Included as standard Reversible fence jaws Hsdpfx Aehp Rcrjbzow versatile integratable stop for bridging the tool gap enables safe working even with narrow workpieces TECHNICAL DAY

Condition: used, Milling spindle Manufacturer: HSD Type: ES 779L 4P 12.00 kW H1 HSD 12 kW milling spindle with tool changer and 6-position station for Kuka Quantec series Comprising: 1 piece Water-cooled milling spindle with tool changer HSD ES779L 4P 12.00 kW H1, liquid cooling 1 piece Tool station for 6 tools (tool changer station) with Leonie measuring station for tool inspection 1 piece Hodowyay Djpfx Abzsw Kuka Tech cabinet with KEB frequency converter, control technology, and water cooler, Art. No. 00216249, Serial No. 0395009, year of construction 2018, weight 360 kg 1 piece Hose package and connection cables from control cabinet to HSD spindle Originally intended for a Kuka robot of the Quantec series, all holders and connections are included. 221025ä

Year of construction: 1995, condition: excellent (used), functionality: fully functional, Elumatec KF 78/23 – 2-Spindle Copy Router Professional milling machine for aluminium, plastic, and light metal profiles Horizontal machining area (with stop): 300 × 100 mm Horizontal machining area (with copy template): 270 × 70 mm Horizontal travel: 80 mm Vertical machining area (with stop): 290 × 100 mm Vertical machining area (with copy template): 230 × 70 mm Vertical travel: 120 mm Spindle speed: 12,000 rpm Profile clamping range: 150 × 150 mm Motor power: 0.74 kW Power supply: 230 / 400 V, 3-phase, 50 Hz Compressed air connection: 7 bar Air consumption per cycle: approx. 12 l (without cooling), 24 l (with spray operation) Hjdpfxoxl Hp Tj Abzjw Machine dimensions (L × W × H): 940 × 1,150 × 1,600 mm Weight: approx. 260 kg

Condition: used, Year of construction: 1985, Table length: 2500 mm Spindle travel: 120 mm Table width: 760 mm Design: Tilting Tilt angle forward: +45° Tilt angle backward: -5° Speed selection: Belt change and pole switching Spindle taper: MK 5 Column material: Cast iron Control panel position: Top Spindle height adjustment: Handwheel and electric Spindle tilt adjustment: Handwheel with dial gauge Spindle lock: Manual Spindle brakes: Electric Spindle rotation direction: Left/right Motor power: 4.7 / 5.7 kW Table opening closure: Insert segment Fence jaws version: Aigner jaws Hedpfew Aihpex Abzsw Fence adjustment: Manual Fence display: Scale Cutter jaw adjustment: Manual Power feed unit: Yes, 4 rollers, Haffner Feed adjustment: Fixed speeds Dimensions: 2500 x 1500 x 1900 mm Location: Nattheim

Condition: new, Year of construction: 2025, functionality: fully functional, height adjustment type: electric, power: 7.5 kW (10.20 HP), Tiltable spindle moulder HOFMANN TFS 107 Basic equipment: 7.5 kW motor, 400 V, 50 Hz, table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings Electronic starting and braking device Electric height and swivel adjustment in rapid and creep speed accurate to 1/10, height adjustment approx. 145 mm, swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Hedpfx Aju Nz Ndebzjw Milling fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Paint finish: gray-white/signal blue Electrical connection value: Motor power 7.5 kW - Minimum fuse (A) slow blow 30 Additional equipment installed in this machine: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Infinitely variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard motor with soft start - HOFMANN milling fence type 2620 instead of standard fence 2601 Efficient Total adjustment via handwheel according to display incl. option to switch to tool zero dimension. Digital display for individual jaw adjustment. Including quick clamping system for the fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and fillet board, consisting of 5 rulers, 1 fillet board, 10 sliding blocks - Control panel upwards - Tool compartment for TFS 107 (only possible with top console) - Operating instructions TFS 107 German

Condition: new, Year of construction: 2025, Z-MaT DT500E-S, Siemens 828 D ShopTurn 15" Touch CNC Turning Center, with Sub-Spindle, Driven Tools, and True Y-Axis, 35° Slant Bed Max. Swing Diameter: 650 mm Max. Turning Diameter: 320 mm Max. Turning Length: 550 mm Linear Roller Guides on All Axes Hjdpowwvldsfx Abzow Rapid Traverse X/Z/Y: 20/20/12 m/min Y-Axis Travel: 140 mm, +/- 70 mm Turret: 12 Stations BMT55 — 12 Driven Positions Max. Turret Speed: 4000 rpm, 3 kW Main Spindle: Chuck Diameter: 254 mm Spindle Nose: A2-8 Max. Bar Capacity: 75 mm Spindle Bore Diameter: 86 mm Spindle Drive Power, Direct Drive: 15/16 kW Max. Spindle Speed: 3500 rpm Sub-Spindle: Chuck Diameter: 152 mm Spindle Nose Standard: A2-5 Max. Bar Capacity: 46 mm Drive Power: 11 kW Max. Speed: 3000 rpm Dimensions (W x D x H): 3.1 x 2.0 x 2.25 m Weight: 5.3 t Standard Equipment: Parts Catcher (Preparation) Hinged Belt Chip Conveyor Oil Skimmer Coolant System 3-Color Warning Light Work Area Lighting Centralized Lubrication System Programmable Tailstock Set of Soft Jaws Tools and Toolbox CE Conformity Operating Manual The machine will be exhibited at EMO, Hall 12/D10 and will be available immediately afterwards. A wide range of automation options is available, such as bar loaders and loading robots.

Condition: as good as new (ex-display), Year of construction: 2025, Minimax ti 55es LL - spindle moulder Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence heavy-duty professional: with fine adjustment via rack and pinion, with numerical display, ALU stop baking, 3-fold positioned for quick repeat of setting Scope of delivery: Hedpjdqzh Refx Abzsw Aluminium milling stop baking Milling wheel arch guard Extension table left and right Model minimax ti 55es LL Item No. 5502252 Technical data Dimensions of the working table 2500 x 655 mm Formatschiebeschlitten commercial length of spindle dimensions 125 mm Max tool diameter 240 mm Max tool diameter lowerable 230 mm Max tool-Ø pin cutter 320 mm Spindle inclination 0-45 degree Speed 3500/6000/8000/10000 min-1 Engine power 400 V / 50 Hz / S6-40% 5.0 kW Suction nozzle diameter 2 x 120 mm

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: Hjdpfxjxc Trpo Abzsw - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 80-03/224-02, power: 4 kW (5.44 HP), pivoting range: 45 °, Tilting spindle moulder milling machine Hsdpsxp Rmksfx Abzew

Condition: used, Year of construction: 2007, Mecof Air One 3 Axis 165 High-Speed Milling Centre With Rotary Head. Serial No. 40719 (2007) with Fidia C10 CNC Control, Travel X/Y/Z = 1650/2300/1000mm, Table Size 2500 x 1750mm, 40 Tool ATC, Max Spindle Speed 30,000rpm, Spindle Taper HSK 63E, 40 Tool ATC, Feed Rate Max 60,000mm/min, Spindle Power 22kw, Blum Tool Setting. CE Mark Please Note: Dismantling and Loading will be carried out by our own supplier. A charge of €11,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Hodpfx Abjxnm Hwszew

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Tilting Spindle Moulder MARTIN T25 Very good condition; the machine is from a correctional facility and has been idle for the last several years. It was used only minimally and operated by a single person. Everything is in perfect working order. All bearings and guides are in good condition. Year of manufacture: 1989. The machine features a top-mounted control panel. The fence allows one fence jaw to be adjusted in depth with fine adjustment and scale, enabling tasks such as jointing or glueing profile work. The entire fence can also be depth-adjusted using a handwheel and threaded spindle, allowing for very precise and fast settings. Additionally, one of the two fence jaws is tiltable. Spindle lock is engaged via a lever. Excellent chip extraction with two suction ports: 125mm at the fence and 100mm at the machine table. Equipped with a 30mm spindle, steplessly tiltable from -5 to 45°. The tilt adjustment is electric and displays digitally. Reversible spindle rotation (clockwise/counterclockwise). Hodjxn A H Tspfx Abzsw Nationwide personal delivery and demonstration within Germany for €220—risk-free purchase. Shipping to Austria and the rest of the EU available upon request. Large table opening up to 480mm, adjustable via reducing rings (allows safe machining with both large and small diameter cutters). Four spindle speeds: 3000, 4500, 6000, and 9000 rpm. Spindle height adjustment is also electric, with digital display. Table is made from heavily ribbed cast iron. Spindle can be changed (a 40mm spindle can also be fitted). Very heavy-duty and durable design, built for the most demanding milling operations. Suitable for all milling tasks. Optimal power transmission via V-belt drive. Supplied with manual and documentation. With STEFF 3-roller power feed, type 34. The power feed offers reversible rotation and four feed speeds; the feed rollers are individually mounted. Table size: 1180mm wide x 800mm deep. Ready for immediate operation. 380V, 5000W and 6000W (due to two speed settings). Complete with all necessary safety equipment, motor brake and emergency stop. Certified by the Wood-BG, bears the GS safety mark. Machine weight: approx. 1200 kg. Equipped with motor overload protection switch. Professional-grade equipment, not DIY store quality. Optimal, simple, fast and safe handling.

Condition: good (used), functionality: fully functional, machine/vehicle number: C431-Q11, Balestrini double-headed tenoning machine model T0 Two work tables Round and longitudinal tenons Hodpfx Abjw A Rp Iozsw Various height, width, length adjustments, etc. Fully refurbished tenoning machine, electrical cabinet, automation, and sensor. Can be seen in operation at our premises Equipment price included Transport and installation available at extra cost.

Condition: new, Year of construction: 2025, Martin T 27 Flex tilting spindle moulder - can be tilted on both sides - Flexibility for today and tomorrow. Setting up a tilting spindle moulder is normally a major challenge. Not on the T27 Flex with its modern touchscreen control: thanks to the integrated tool offset, you can set up even complex milling patterns with a tilted spindle in no time at all. Only in this way can the large swivel range of 2 x 46° be used efficiently - and you can fully follow your inclinations. In addition, the machine can be tailored precisely to the individual requirements of your business. Equipment: T 27 Flex T 2711-a Digital display of infeed jaw position in the control unit T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex protection T 2742-a Integral fence incl. filling rod T 2790-La Console for feed stand attachment left Hjdpfx Abor Hr D Nozew The photo only shows an example machine / feed is not included Location: Comes to stock 54634 Bitburg - available in two weeks -

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), spindle diameter: 30 mm, pivoting range: 46 °, input voltage: 400 V, rotational speed (min.): 1,000 rpm, rotational speed (max.): 18,000 rpm, input frequency: 50 Hz, The new profil 92 M e-motion spindle moulder is Format4’s premium model, offering maximum operating comfort and ensuring absolute efficiency through minimal setup times during milling operations. The advanced electric spindle features an HSK 63F interface for a tool quick-change system with pneumatic clamping. The swiveling range of ±46° enables limitless machining versatility. With the self-explanatory e-motion control via a 15-inch touchscreen panel, spindle speed, spindle height and angle, as well as the fence position and even the table opening, can be set intuitively and precisely. Integrated memory for tools, spindle settings, and milling programs ensures perfect repeat accuracy and the shortest setup times. Electrically controlled, eccentric inserts provide maximum table support area and significantly reduce adjustment work, especially when swiveling the spindle. The newly developed heavy-duty precision milling fence features two powered axes for precise depth adjustment of the complete fence, plus an independent, adjustable depth stop for the right-hand feeding jaw. For convenient access during curve milling, the fence can be swung completely out of the working area. Optionally, the Format4 profil 92 M e-motion can be equipped with an electrically height-adjustable power feeder. Further technical data: - Maximum tool diameter: 250 mm - Usable spindle height: 140 mm - Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F spindle, Ø 30 mm, 140 mm 118 Integral safety rulers, 650 mm 119 Table opening 255 mm with controlled eccentric inserts 183 Table extension on both sides 670 mm with 2200 mm sliding frame 213 Electrically height-adjustable feeder support, incl. horizontal tube 220 Parts list holder with A9 clipboard Advantages: - Highly efficient electric spindle with stepless speed adjustment and HSK 63F interface - Position control for milling height and angle ±46º - Position control for milling fence including offset function - Smartouch with intuitive e-motion control system - Table opening with controlled eccentric inserts (optional) - Electrically adjustable height for the feeder on overhead column (optional) Further information: - The electric spindle features a HSK F63 tool quick-change system Hedpfowztr Nex Abzjw - Clamping range: 2–25 mm with OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm sliding frame - Table opening 255 mm with controlled, eccentric inserts