Used Milling Table for sale (22,276)

Condition: good (used), Year of construction: 1998, functionality: fully functional, Robust and high-quality table milling machine from the manufacturer Hofmann. The machine was manufactured in 1998 and is suitable for a wide range of milling operations in carpentry and woodworking. Rcsdpfxs Agm T Ho Airoh Technical data: - Manufacturer: Hofmann - Type: TF 1200 - Year of manufacture: 1998 - Machine number: 126-01986 - Motor power: 5.0 / 6.2 kW - Three-phase connection: 400 V, 50 Hz - Current consumption: 10 / 13 A - Milling spindle: Ø 30 mm - Spindle speeds: 3,000 / 4,000 / 5,000 / 6,000 / 8,000 / 10,000 rpm - Spindle: not swiveling - Height adjustment: manual via handwheel - Dust extraction connections: typically 2 × Ø 120 mm Feed system – additional cost of €500 net. Inspection and test run possible by arrangement. Loading and shipping can be arranged.

Condition: like new (used), Year of construction: 1998, functionality: fully functional, Swivel spindle milling machine VEMA TFMS 2-4 in very good condition, like new; the machine comes from a correctional facility and has only been idle for the past few years; it has been used very little and operated by only one person. VEMA is a company from Northern Germany; the machine's design is similar to the KÖLLE F45 or the PANHANS 240. everything functions perfectly Rjde Afaugepfx Airoch all bearings and guides are in good condition year of manufacture 1998 the machine has the control panel on top with a milling stop that can be adjusted on one side or completely in depth; this is possible with a handwheel in each case. For complete adjustment, there is a mechanical counter; the counter can be set to zero at any point by pressing a button, allowing the stop to be adjusted quickly and very precisely. both stop jaws can also be adjusted individually; there are also 2 mechanical counters, which allow for one-sided adjustment and also enable facing operations, for example, on a gluing profile. the milling stop can be rotated on the machine table the machine has an extra-powerful motor with 7500 watts with pneumatic spindle locking the chips can be removed very well, with 2 extraction ports 120mm with a 30mm spindle that can be adjusted steplessly from -10 to 45°; the spindle is adjusted by handwheel with a mechanical counter. with right/left rotation we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros; this means you have no risk when purchasing. Shipping to Austria and the rest of the EU is also possible upon request. with a large table opening that can be reduced by means of various rings; this means that milling cutters with a very large diameter can also be used, and you can also mill safely with small milling cutters (the rings are included, but they are not visible in the pictures). with 3000, 6000, 4500, 7500 and 9000 rpm the spindle height adjustment is also done by handwheel; here too, there is a very precise mechanical counter for reading the height. the table is made of highly ribbed cast iron with an interchangeable spindle (a 40mm spindle can also be used) very robust and durable design; the machine was built for the most demanding milling operations and is suitable for all milling operations. optimal power transmission through belt drive with instruction manual with 3-roller feed HOLZ HER ETX the feed has right/left rotation; the feed rollers are individually mounted and all are like new; it has 8 speeds the machine table is 1020mm wide and 980mm deep + 500mm wide extensions on the left and right the machine can be used immediately 380V, 7500W Weight: approx. 1000kg with all necessary safety devices; the machine is approved by the Holz-BG (German Wood and Furniture Employers' Accident Insurance Association). the machine weighs approx. 1000kg with motor protection switch against overload professional equipment, not cheap hardware store junk optimal, simple, fast and safe handling

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,600 mm, feed length W-axis: 900 mm, workpiece weight (max.): 12,000 kg, overall weight: 30,000 kg, year of last overhaul: 2020, For Sale – Used CNC Horizontal Boring Machine UNION BFKR 150 CNC Control: HEIDENHAIN TNC 530 CNC Retrofit: The machine was retrofitted with CNC control in 2020. Technical Specifications: X-axis travel: 3,000 mm Y-axis travel: 1,600 mm Z-axis travel: 1,600 mm W-axis travel: 900 mm (spindle travel) Spindle diameter: Ø 150 mm B-axis: 360° – CNC-controlled rotary table Table dimensions: 1,600 × 2,000 mm Machine Condition: The machine is currently still connected to the power supply and is available for inspection and a test run. The machine underwent a mechanical overhaul approximately three years ago, including the replacement of bearings and other components. Redo Afm Uyopfx Airoch The machine has been out of operation for approximately six months.

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 79-12/075-98, functionality: fully functional, input voltage: 380 V, input current: 86 A, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, pivoting range: 45 °, rip fence adjustment: manual, actuation type: electric, table length: 2,000 mm, total length: 2,220 mm, total width: 710 mm, total height: 1,220 mm, overall weight: 450 kg, Equipment: documentation/manual, Everything on the machine is in perfect working order. The sliding table has a length of 1920 mm. It was manufactured without brakes. It is in the condition shown in the pictures and is available for testing on a pallet. Rcodpfez N S Izex Airjh

Condition: used, Year of construction: 1995, TOS W100A horizontal table boring machine X spindle is worn Digital read out is partially functional lot of tools included Table Dimensions 1200 x 1200 mm X-Axis Travel (Longitudinal) 1250 mm Rcedpfx Asz Sff Hjireh Y-Axis Travel (Vertical) 1120 mm Z-Axis Travel (Cross) 1600 mm W-Axis (Spindle) 900 mm Spindle Motor 11mkW Spindle Speed 7-1120rpm Spindle Taper ISO 50 Spindle Diamete 100 mm Facing Chuck 600 mm Floor Space 6020 x 3500 x 3000 mm Machine Weight 14.000 kg Price ex VAT Delivery ex works, as is

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,100 mm, spindle diameter: 100 mm, table length: 1,100 mm, table width: 1,000 mm, TOS Varnsdorf WH 10 NC table type horizontal boring mill (borer), year of construction 1987. The machine has been converted to an HSP control and its electrical/electronic system has been overhauled. Well maintained and in working condition. Technical data: - Table size: 1,100 x 1,000 mm - X travel: 1,200 mm - Y travel: 1,100 mm - Spindle diameter: 100 mm - Control: HSP (retrofit), electrics overhauled Rsdsz Apa Njpfx Airsch Available for inspection in our workshop and ready for immediate delivery.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, We can provide this machine, connected and ready for testing. A video of the machine can be sent via the WhatsApp application. General overhaul in 2008. Heideihaim positip 855 X 6,400 mm Y 2,200 mm W 1,120 mm ISO 50 Weight: 32,500 kg Redpfx Ajzak A Isirjch Two plates, dimensions 602x2000x400 mm, are included with the machine. A head is also included with the machine.

Condition: used, Year of construction: 1971, For sale is a TOS WH 80 drilling machine, manufactured in 1971, in working condition. The machine is equipped with a retrofitted digital display and has an MK5 spindle. Equipment / Condition: * TOS WH 80 * Year of manufacture: 1971 * Functional * Retrofitted digital display * MK5 spindle * Large clamping table with T-slots * A large amount of additional equipment and accessories is available * Maintenance / Repairs: In 2024, the gearbox was opened and overhauled. Various gears were renewed or replaced during this process. The machine can be inspected on-site and, by arrangement, demonstrated. Due to its size and weight, the buyer is responsible for organizing the collection or transport. Further photos and information on the available additional equipment are available upon request. VAT can be shown separately. Redpfxszwv Dko Airjch

Condition: used, Year of construction: 1991, Design: fixed Table size: 1200x730 mm Table height: 900 mm Spindle speeds: 3000/4500/6000/7000/10000 rpm Milling cutter diameter: 30 mm Rcedpfx Ajz Nnyyjiroh Spindle working length: 180 mm Spindle direction: right/left Speed display: optical Automatic motor brake: mechanical foot brake Design of fence jaws: Aigner fence system Fence adjustment: manual Display of milling fence: none Feed mechanism: with 3 rollers Control panel position: bottom Weight approx.: 600 kg Motor power: 4 kW Dust extraction diameter: 120/120 mm Location: Rieth

Condition: used, Year of construction: 1980, Spindle swivels: No Height adjustment: Handwheel Milling vice adjustment: Manual Height indicator: Scale Milling stop indicator: Scale Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000, speed indicator defective Motor power: 5 / 6 kW Motor brake: Yes Rodpfx Ajzdzb Ieirech Dust extraction port: 120 mm Machine length: 2500 mm Machine depth: 900 mm Weight: 800 kg

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of steel cast gray iron Table unit with clamping plate and very robust guide rail Table clamping surface: 5500 x 2000 mm Rjdpfx Aiethuzporjch Travel of the table clamping plate: approx. 3100 mm Table height / overall height: 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single start) - Machining table guided very stably on the bed - Metal telescopic guide rail cover - from a DROOP & REIN portal milling machine - Table longitudinal movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots, 28 mm - Drive via SIEMENS servo motor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Overall length: 9500 mm Width: 2000 mm Overall height: 1050 mm Weight: 27 tons Good condition

Condition: used, Year of construction: 1994, functionality: fully functional, overall weight: 27,000 kg, spindle diameter 125 mm x-travel 2000 mm y-travel 1600 mm Control Siemens 840 C z-travel 1400 mm 600 mm Rsdpfoztfwxox Airech ja total power requirement 40 kW weight of the machine ca. 27 t

Condition: excellent (used), Spindle: 40 mm / 30 mm Redpsyxnxlefx Airsch • Motor power: 7.5 kW • Table length: 250 cm • Table width: 80 cm In very good condition.

Condition: good (used), total length: 2,500 mm, stable, well-functioning machine with a drive unit. Rsdpfxjz Dfy So Airech axle: 50 mm.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 2,200 mm, table width: 1,800 mm, TOS Varnsdorf WHQ 13.8 CNC table type horizontal boring mill, year of construction 2000, made in the Czech Republic. Rsdpfxez Ap Aws Airoch The machine is controlled by an original Heidenhain TNC 430 CNC with the Heidenhain operating panel and runs programs produced with CAM software. The control cabinet air conditioning unit was replaced one year ago. The machine is well maintained and in full working order. Technical data: - Control: Heidenhain TNC 430 - Spindle diameter: 130 mm - Spindle speed: 10 - 2,500 rpm - Tool taper: ISO SK 50 - X travel: 3,500 mm - Y travel (vertical axis): 2,500 mm - Z travel: 1,250 mm - Table size: 2,200 x 1,800 mm - Operator platform with 250 kg load capacity - Air conditioning unit fitted one year ago - Programmable via CAM software The machine can be inspected under power in our workshop.

Condition: ready for operation (used), Year of construction: 1975, Immediately available ex-works: Union table drilling machine Type BFT 90 / 2 Year of manufacture 1975 / Overhauled and fitted with digital displays in 2022 Spindle 90 mm Mounting SK 40 with adapter MK 4 Table 1120 x 1000 mm Table load 2500 kg Distance spindle – stop 2400 mm Travel distances X/Y Z 1000 / 1250 / 1000 mm Spindle speeds 8 - 1600 rpm 2 digital displays Stop Rsdpfx Aie Aa Indorech Spindle travel 710 mm Weight 9 tons For the price of Euro 8,500.—plus VAT ex-works.

Condition: excellent (used), Year of construction: 2019, Table milling machine HOFMANN TFS 107, manufactured in 2019. Table milling machine with a milling fence and safety guard. Rjdpfx Aie Adubxsrjch Collection possible from December 15th. Earlier collection is only possible by prior arrangement. Inspection by appointment only. Dismantling, loading, and transport will be arranged. Price on request. Contact: DS-Maschinen – Owner David Schulz.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle diameter: 130 mm, spindle speed (max.): 1,500 rpm, table length: 1,800 mm, table width: 1,600 mm, feed length W-axis: 600 mm, TOS Varnsdorf WHN 13 A table type horizontal boring mill (borer), year of construction 1982. The machine has been retrofitted with a FANUC CNC control; maximum spindle speed 1,500 rpm. Well maintained and in working condition. Technical data: - Table size: 1,600 x 1,800 mm - X travel: 3,500 mm - Y travel: 2,000 mm - Z travel: 1,000 mm Rodpfx Aoz An Ufoirjch - W travel (boring spindle / quill): 600 mm - Spindle diameter: 130 mm - Max. spindle speed: 1,500 rpm - Control: FANUC (retrofit) Available for inspection in our workshop and ready for immediate delivery.

Condition: good (used), PANHANS machine, year of manufacture 1983 – Type 259-4 Technical specifications: * Manufacturer: PANHANS * Machine type: 259-4 * Machine number: 2137 * Year of manufacture: 1983 * Rated voltage: 380 V * Frequency: 50 Hz * Operating current: approx. 11.5 A (according to the nameplate, value not conclusively verified) Redpfsz S Nxpjx Airoch

Condition: ready for operation (used), Scharmann - WB 80 / Heidenhain digital display ND 780 -Travel ranges X/Y/Z 1300x1200x1200mm -Heidenhain digital display -Rotary table - 1200x1200mm -Table load max. 5 tons -Spindle mount MK5 -Automatic feeds 0.053-6.35mm -Rapid traverses -Spindle speeds 24-2880 rpm -Coolant system Rcedpjztyi Nsfx Airoh -Various accessories / tool holders etc. Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Type FB 125 b Year of manufacture 1960 Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Installation height, spindle / table 1400 mm Rsde Aa Im Topfx Airoch Table longitudinal travel 2500 mm Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm With Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works

Condition: repair required (used), Year of construction: 2000, functionality: not functional, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, overall weight: 1,100 kg, Equipment: documentation/manual, HOFMANN table milling machine, type TF1200, with a sliding carriage on the side and an extendable table support, with electric height adjustment. Unfortunately, the programs on the control unit cannot be saved. Otherwise, the machine is in very good condition. Redpfx Aijz Eztkeroch

Condition: good (used), Year of construction: 1991, Table saw Manufacturer: SCM Type: T 130 Year of manufacture: 1991 Rcodpfx Aijzhlrroroh Table: 1200 x 730 mm Power: 4 kW Spindle: 30 mm Reversible rotation Including feed mechanism

Condition: refurbished (used), Year of construction: 2017, functionality: limited functionality, WMW UNION CNC table-type boring mill, completely overhauled and modernized in 2017. The machine has been rarely used since then. It is currently disassembled and kept in storage. Cannot be inspected under power!!! Rceds Af U Dvepfx Airsh

Condition: used, Year of construction: 1933, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,259 mm, travel distance Z-axis: 1,500 mm, table length: 1,250 mm, table width: 1,400 mm, overall weight: 10,500 kg, x-travel 1600 mm y-travel 1259 mm z-travel 1500 mm tool adaptor SK 50 weight 10,5 t Rcjdez Aun Sopfx Airjh output 49 kw feed 6000 m/min control Heidenhein 151 1600 min table: 1250-1400 mm serial number 1933 weight of the machine ca. 10,5 t