Used Paper Cups for sale (3,843)

Condition: excellent (used), Year of construction: 2012, CNC machining center Hedelius C 80-2300 Control: Heidenhain iTNC 530 Bsdeylid Ujpfx Abtell Year of manufacture: 2012 Internal machine no.: 5 Travel paths: X-axis: 2,340 mm Y-axis: 800 mm Z-axis: 600 mm Clamping surface: 2,900 x 750 mm Pendulum machining: 2 x 945 x 800 mm Table load: approx. 2,800 kg Spindle taper: SK 40 Tool magazine: 30 stations Spindle speed: 30 - 8,000 rpm Equipment: Chip conveyor Paper band filter unit Handwheel HR410 Machine enclosure 2x LTA extraction systems Partition wall Pickup magazine for angle heads

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, Blsdjyv Iqvepfx Abtsl widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Ricoh Pro C5300s colour production system. Item for sale: 1 x Ricoh Pro C5300s with the following equipment: Blsdpfx Absymwliotol Includes Fiery Controller E-27B Includes LCIT RT5140 Includes Finisher SR5110 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 247,315 pages Colour: approx. 219,774 pages Black: approx. 27,541 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 15,719,744 pages Condition: Bodpfxsy Dfclo Abtjll This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Technical details: drum diameter: 600 mm weight of the machine ca.: 0,42 t Lanner batch wringer ME61-2 for deoiling of metal chips -turnkey delivery and easiest handling -very long service life, operation free of vibrations -compact and easy to maintain, i.e. low maintenance costs and quick return of investment -standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control -including control cabinet laterally placed, i.e. not in swivel range of crane -drum volume 100 Liter/max. 200 kg -rotation speed max. 740 min-1 -power 5,5 kW Painting: RAL 5012 light blue (batch wringer, crane support) RAL 1003 signal yellow (traverse) RAL 7035 light grey (control cabinet) In each case silk gloss. Changes after consultation. Also included in the scope of delivery: -Crane support with swivel arm: mounted on the side of the centrifuge housing. For lifting the insert drum out of the centrifuge. -Electric chain hoist: with control pendant for suspension of the crossbeam, max. load 250 kg. Designed for indoor use -Lifting beam: for lifting the insert drum. -Documentation on CD-ROM and in paper form Optional for extra charge: -Additional insert drum with pivot, perforation: ø 3 mm -Tank with 100 L capacity for the spun-off liquid. With pump, electric control, float switch and drip tray This is not a used machine! Please, contact us for getting more information and pictures on mail(at) or Bledpfx Abeft Tkqjtol *

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 180 Press” Items for sale: Bljdpfszxwypjx Abtjl 1 x Xerox Versant 180 Press with the following specifications: incl. Fiery NX Pro-01 Includes A-CF01 paper deck Includes A-GW03/A-FN13 finisher Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,096,427 Black: Approx. 661,731 Colour: Approx. 434,696 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2002, Ecosystem DRY USA 76-4 Year: 2002 Maximum plasticizing dimensions: 76 Minimum sheet size: 25 x 25 Maximum sheet size: 88 x 106 Maximum production speed: 35 Mechanical speed: 40 Maximum number of copies/hour: 6000 Installed power: 13 Operating power: 9.5 Dimensions (w/l/h): 1850x4540x1800 Total weight: 2220 kg Thermal energy: Heating – electric resistance Power – 4100 Bedpfx Ajzx Dt Aebtell Maximum temperature: 115-130°C Available immediately In production

Condition: used, Technical details: drum diameter: 400 mm revolutions per minute: 980 U/min total power requirement: 2,2 kW Lanner batch wringer ME41-2 for deoiling of metal chips -turnkey delivery and easiest handling -very long service life, operation free of vibrations -compact and easy to maintain, i.e. low maintenance costs and quick return of investment -standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control -including control cabinet laterally placed, i.e. not in swivel range of crane -drum volume 35 Liter/max. 50 kg -rotation speed max. 980 min-1 -power 2,2 kW Painting: RAL 5012 light blue (batch wringer, crane support) RAL 1003 signal yellow (traverse) RAL 7035 light grey (control cabinet) In each case silk gloss. Changes after consultation. Also included in the scope of delivery: -Crane support with swivel arm: mounted on the side of the centrifuge housing. For lifting the insert drum out of the centrifuge. -Electric chain hoist: with control pendant for suspension of the crossbeam, max. load 250 kg. Designed for indoor use -Lifting beam: for lifting the insert drum. -Documentation on CD-ROM and in paper form Optional for extra charge: -Additional insert drum with pivot, perforation: ø 3 mm -Tank with 100 L capacity for the spun-off liquid. With pump, electric control, float switch and drip tray This is not a used machine! Please, contact us for getting more information and pictures on mail(at) or * Bledpfx Aeft Tipjbtjl

Condition: used, Year of construction: 2023, Labelling machine for the cold-glue application of paper front, back and belly labels onto glass bottles. Equipped with a Domino CO₂ laser for label marking. The labelling machine was upgraded in 2023 with a mechanical overhaul and a refurbishment of the electrical systems. Additional title: cold glue labeling Capacity appr.: 60000 bo/h Current: 32 A Voltage: 400 / 230 V Frequency: 50 Hz Formats: 0.5 l Longneck Operation / Control: Simatic S7-1500 Position: in stainless steel housing on feet Base construction: carousel-type machine Bsdpfx Ajzu Rzlobtsll Features: label magazines; glue pumps; safety doors; control cabinet; operator terminal with visualisation

Condition: used, optional equipment: Machine table in 2 support systems – left table half with TVN supports, right table half with ALU table and its own vacuum circuit. Travel ranges: X = 4400 mm, Y = 1720 mm, Z = 400 mm Tool holder HSK 63 F Motor 7.5 kW, 900 - 20,000 rpm Inverter 18 kW for spindle unit – increased power output up to 11 kW Tool changer RAPID 24 = 24 tool positions Drilling unit with 18 spindles Equipment for door processing (H = 110 mm) - for processing left and right doors Bjdezxzgmjpfx Abtsll - with 4 pneumatic positioning aids, each with a capacity of 20 kg - 6 reference stops with veneer overhang Laser positioning for TV system Central extraction connection above the CNC unit Vacuum pump 250 m³ Control system/control cabinet: - NUM Series 1000 with Office PC - XILOG-PLUS - Cable remote control - Analog modem with software for teleservice Swinging machining standard for 2 work areas LED display / suction cup positioning Motorized chip conveyor 3-part floor mat / front Large accessory package with vacuum suction cups, stops, etc. Machine from a carpentry business closure due to retirement Machine is still in operation and in very good condition available at location

Condition: as good as new (ex-display), Year of construction: 2026, CMS Ypsos Bsdpfx Aopygrajbtjll Vertical cnc working center for Glas Bearbeitungsmaße: Max. Glas-Length: 3.200 / 4.500 / 6.000 mm Max. Glas-height: 2.200 / 2.800 / 3.300 mm Min. Glas-length: 420 mm Min. Glas-height: 270 mm Thickness: 3-30 mm Options: - 2x groups of suction cups which 3 suction cups on each group - Elektrospindle 3,7 kW 0-12.000 U/Min - Materialmeasurement and Toolmeasurement system - Rotating tool magazin - Additional drilling from the backside - CAD/CAM - central lubrification

Condition: used, mileage: 3,81,042 km, power: 375 kW (509.86 HP), first registration: 12/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, color: red, driver cabin: other, gearing type: automatic, suspension: steel-air, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, traction control, trailer coupling, Checked. Certified. Trusted. Permissible total weight: 18,000 kg, leaf spring air suspension, retarder, digital tachograph, trailer coupling: on rear crossmember, Rockinger, on rear crossmember frame, maintenance-free fifth-wheel coupling: 150 mm installation height, JOST JSK 42 K0 2 inch, maneuvering coupling: Rockinger SK5 on rear crossmember, on rear crossmember, Rockinger, on rear crossmember frame, electronic braking system EBS, brake assistant, electronic stability program ESP, anti-slip regulation ASR, Climatronic, auxiliary air conditioning: electric, auxiliary heater: 6 kW, comfort driver's seat, driver's seat with air suspension, driver/passenger seat height-adjustable, driver's armrest, heated driver's seat, LED headlights, automatic headlights: with light sensor, headlight range adjustment, MAN Media Truck Advanced, MAN SmartSelect, sound system, lane keeping assistant, rain sensor, multi-function steering wheel, adjustable steering column, lumbar support for driver, sunroof: electric glass sunroof with darkening and mosquito net, roof spoiler: 600 mm, fog lights, exterior mirrors elect. and heated, curb mirrors elect. and heated, immobilizer: electric, central locking with remote control, tinted windows: door windows tinted, laminated windshield tinted, rear differential lock, underrun protection: front, sun visor, twin tires: on rear axle, aerodynamic package, refrigerator, warning lights: rotating beacons on the roof of the cab, right and left, LED rotating beacons yellow (individual LEDs light up in cascade - all around), axle load indicator, work lights: halogen work lights white, hill start assist: MAN EasyStart, LED daytime running lights, connector plug 1x15 pole, cup holder, Efficientline package, Efficientroll, high beam assistant, turning light: LED, telematics system: MAN Telematics, light sensor, smartphone app integration, speed limiter: adjustable driving speed limiter (DSL), limiter (engine control), electronic 89 km/h + 1 km/h tolerance (engine control), anti-spray, trailer. Bledpfozhy Egsx Abtsl

Condition: excellent (used), Year of construction: 2006, S.C.T. - ASP1020 - screen printing cylinder for UV varnishing Year 2006 Max. size: 1,020 x 740 mm Min. size: 560 x 370 mm Max. varnishing area: 1,020 x 720 mm Control panel Bodpszx Duyjfx Abtoll Paper weight: 120 – 350 g/m2 Frame format: 1,140 x 1,280 mm Stack height: 700 mm Speed: 1,000 – 3,000 sheets/hour Dual tunnel: IR / UV In production Available immediately

Condition: excellent (used), Year of construction: 2004, operating hours: 27,000 h, turning length: 1,070 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,070 mm, workpiece weight (max.): 150 kg, total height: 2,800 mm, total length: 9,000 mm, total width: 5,000 mm, Multi-tasking lathe DMG Gildemeister - GMX 200 linear Forkardt chuck main spindel 250 mm Forkardt chuck sub spindel 250 mm Chip conveyor Filtration with IKZ and Paper filtration New Main spindel beaering for 12k in 2022 Excellent maintained machine under power Bljdpjzl Agzsfx Abtjl Full set books manuls / books Max. turning Ø: 560mm X-Axis: 485mm Y-Axis: 160mm Z-Axis: 1070mm B Axis: 240° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 37kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 37kW ATC / revolver: 80 Speed live tools: 12000Rpm B-Axis Toolsystem:HSK63 B-Axis Speedranges:12000Rpm B-Axis power: 22kW Chip conveyor: Yes Tool eye: Yes Hours: 27000H Workpiece load: 150 Length: 9000mm Width: 5000mm Height: 2800mm Weight: 14500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, Air suction collator HORIZON VAC-100a, 10 Stations, used Key Features - Efficient and Reliable: The Horizon VAC-100a is designed for demanding environments. It ensures your collating jobs are completed quickly and efficiently - Touch & Work: Thanks to 'Touch & Work' technology, the VAC-100a is easy and intuitive to operate - Memory: The machine has 9 programmable memory slots for repeat jobs, saving you time and effort - Accuracy and Precision: Say goodbye to miss-feed, double-feed, and jam problems. The VAC-100a offers error prevention controls to ensure each set is perfectly collated Specifications - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Performance: up to 9,500 sets/h - Loading capacity: 55mm/station - Power: 230V; 50Hz - 1.86kW - Dimensions: 842x652x1,961mm - Weight: 310kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Blodpfezp Hpnsx Abtsl Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Year of construction: 1998, condition: used, Horizon PJ-77 Jogger, used The Horizon PJ-77 jogger aligns paper stacks through vibration to ensure precise processing in printing and binding processes. - Compatible with the following Horizon collating towers: MC-80a, VAC-100a, VAC-60, VAC-1000, VAC-600 - Format: max. 470x318mm; min. 210x148mm - Stack height: max. 90mm - Lowering: max. 30mm - Dimensions: 490x400x460mm - Weight: 40kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Blsdozhliqjpfx Abtjl Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 1991, offer consists of: Horizon AC-8000 S air- suction collator with 8 bins - Format: max: 318x470mm, min: 148x210mm - missfeeding-, doublefeeding and jamming control - integrated jugger - bin pile height: 10cm - paper weight: 23-210g/qm - pile height: 10cm/bin - capacity: up to 2400 cycles/hour - dimension: 165x65x207cm - weight: 510kg Bodpszhlrlefx Abtell - power: 3-phase 400 Volt We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Features and Technical Specifications: - X-axis working range: 3,740 mm - Y-axis working range: 1,570 mm - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 - Machine table: cantilever table Bodpfezlbp Uox Abtjll - Automatic table positioning: available - 6 e-motion workpiece supports - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication - With mobile control console featuring a PC monitor - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit - Includes: 12 frame clamps, 8 large and 4 medium suction cups

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Canon imagePRESS V800” color production system. Bedpfezl Srgsx Abtsll Items for sale: 1 x Canon imagePRESS V800 with the following features: Includes Fiery E500-06 Includes Booklet Finisher AG1 Includes Paper Deck POD Deck Lite-C1 Includes Duplex ADF / R-ADF Not the right configuration? It’s no problem to configure the machine to your specifications. Feel free to contact us! Counter readings: Total: Approx. 253,026 pages Color: Approx. 124,367 pages Black: Approx. 128,659 pages Condition: This listing is for a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you before shipping or pickup. For more information, you are of course welcome to contact us directly

Condition: used, Year of construction: 2004, Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data - Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  - Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 - Bottle Formats: 0,5L and 1,5L PET CSD - Cap Formats: PCO 1810 - Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label - Packaging formats: shrink wrapping with/without carry handle (3x2) - Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) Bedpfsyb Sa Dex Abtjll on Euro pallet (1.200 x 800 mm)  - Application: CSD - Hygienic design - condition: good technical condition, dismantled - blow molding, filling and capping machine as a block system   Scope of Delivery Blow Molding Machine | KRONES | Contiform S08 | 2004 Compressor | Kaeser | only Booster grade | 2004 Filling/Capping | Krones| Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 Mixer | KRONES MSF 24/2 | vacuum-assisted deaeration | Brixmeter | CO2-meter Velcorin | Burdomat II G | 2004 Bottle inspection | KRONES | Checkmat FM-G Fill height (underfill) and cap control Labelling machine | Krones| Unimodul 600-15 | 2004 Bottle inspection | KRONES | Checkmat E | Label Check existence | 2004 Date stamping | Excel 170i UHS | 2004 Shrink Packer | KRONES | Variopac FS-30 | 2004 Handle Application | Comag | H 40/2 | 2004 Palletizer | KRONES | Robot 3A Palletsafety | Lachenmeier Multi Flex 1

Condition: used, Year of construction: 2017, Overview This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data - Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) - Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm - Closure types: Crown caps - Filling system: Isobaric (for beer and carbonated beverages) - Product types: Beer and other carbonated drinks Bljdjzcu Slopfx Abtsl - Incl. dummy bottles and CIP cups - With double pre evacuation systsem for lower oxygen pick up - Machine is cleanable with a CIP system

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: Bodpfxjznr Sls Abtell • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: used, Year of construction: 2010, Booklet Production HORIZON SPF-200A FC-200A VAC-100a VAC-100m This used Horizon booklet system is a powerful machine for professional production of saddle-stitched booklets. It consists of these main parts: - SPF-200A stitching unit - FC-200A front trimmer - 2 VAC-100a and VAC-100m collating towers with 20 feeding stations total Key features: - Fully automatic: Efficient and automated booklet production - Modular: Can add more collating towers to increase capacity - Flexible: Handles offset and digital prints, good for small to medium runs - Automatic format setting: Quick setup for different sizes - High speed: Up to 9,500 sets per hour Blodpfjzpwn Ujx Abtol - Error prevention: Checks for missing/double sheets and jams - Expandable stitching: Can upgrade to 4 stitching heads and loop stitching Technical specs: - Input size: max 508 x 356 mm, min 180 x 105 mm - Final booklet size: max 250 x 356 mm, min 85 x 105 mm - Paper weight: 64 to 300 gsm - Booklet thickness: max 25 sheets / 100 pages (80 gsm) - Speed: Up to 4,500 A5 or 4,000 A4 booklets per hour - Stitching: Standard 0.4-0.5 mm wire, optional 0.6 mm - Collating towers (each): - 10 stations - Size: max 500 x 350 mm, min 148 x 120 mm - Paper: 40-250 gsm - Capacity: 55 mm per station - Speed: Up to 9,500 sets/hour - Power: 230V/50Hz - Weight: About 1,365 kg - Size: About 3,450 x 810 x 1,250 mm (L x W x H) All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, 9 St. ca. 750 x710x1020 mm weight 180 kg Colour 6011 RAL Large drawer usable space ...x... mm Full extension drawer runners (VA) 100% 2 drawers with internal height 30 mm Bledpfx Asy A Tb Tjbtel 2 drawers with internal height 55 mm, 2 drawers with internal height 80 mm, 2 drawers with internal height 130 mm Ball bearing drawer runners Individual pull-out stop Individual locking possible for each drawer TÜV GS tested Drawers flush with cabinet, recessed handles

Condition: good (used), Year of construction: 2014, functionality: fully functional, Table surface: 850 x 400 mm Magnetic table: 800 x 400 x 105 mm Max. table travel (X x Y): 950 x 440 mm Max. workpiece weight: 700 kg (230 kg on the magnetic table) T-slots on the table: 3 pcs x 17 mm Distance between table and spindle center: 47,5 – 547,5 mm Grinding wheel dimensions: D355 x 38 x d127 mm Spindle speed: 1500 / 1800 rpm (50Hz / 60Hz) Spindle drive power: 3.7 kW / 4.0 kW Longitudinal travel: 3 – 25 m/min (hydraulic and stepless) Cross travel: 1 – 1000 mm/min Vertical feed rate: 1 – 1000 mm/min Bljdpfx Abey T Nuwotsl Minimum increment / feed amount: 0,0001 mm – 0,0002 mm Machine weight: 4000 kg Dimensions (L x W x H): 3310 x 2228 x 2710 mm Accessories / Equipment - Semi-automatic operation - Magnetic table 800 x 400 mm - Coolant system with magnetic separator - Paper band filter - Machine feet - Digital display system for the infeed / increment - Built-in wheel dresser in the spindle head The machine is being sold due to company liquidation. It is in good condition and still under power in Hungary.