Used Saddle Stitcher for sale (760)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,812 h, functionality: fully functional, product width (max.): 480 mm, product height (max.): 12 mm, product length (max.): 320 mm, TECHNICAL DETAILS Performance (cycles/hour) Speed: max. 14,000/h Wrapping speed: max. 14,000/h Pre-folding: max. 12,000/h Piston opening: max. 12,000/h Offset stitching: max. 12,000/h Dimensions – Width × Spine Length Uncut: max. 320 × 480 mm Uncut: min. 85 × 128 mm Single-up Cut: max. 315 × 475 mm Minimum cut size: 80 × 120 mm Double-up Uncut: min. 85 × 210 mm Trim mark Cut: min. 2 × 64 × 100 mm Product height (compressed) 3-knife cut: max. 12 mm Middle cut as trimming cut: 10 mm Middle cut as punching cut (half punching width): max. 6 mm Triple cut as trimming cut: 5 mm Bodpfjzw Ak Rjx Abtsll MACHINE DETAILS Operating hours (according to counter): 14,812 h EQUIPMENT 1 CHU feeder 2 DVU vertical feeders 2 DHU horizontal feeders 1 Stitchmaster three-knife cutting machine with middle cut 2 knife sets 4 stitching heads CHA forklift Note: Further technical details can be found in the attached document.

Condition: ready for operation (used), 1 x stitching unit 1550 2 x stitching heads HK75Q 4 x section feeders 1551 Bodpfx Abozmzp Dstsll 1 x cover folder feeder 1528 1 x three knife trimmer 1565 1 x stream delivery 1564

Condition: ready for operation (used), 1 x stitching unit 1550 Bedpfx Aezlu Siobtsll 1 x Touch Screen Navigation control 1 x SEMKO side caliper  2 x stitching heads HK75Q 6 x section feeder 1551   fitted with ASIR camera recognition              ONLY 2,600 hours from NEW 1 x cover folder feeder 1528 fitted with ASIR camera recognistion  1 x three knife trimmer 1565 1 x stream delivery 1564 Optional if needed; Waste extraction system Loop stitching heads Standards stitchinbg heads Slim line stitching heads

Condition: like new (used), Year of construction: 2003, operating hours: 6,762 h, functionality: fully functional, type of input current: three-phase, Equipment: compressor, documentation/manual, MULLER MARTINI PRESTO SADDLE STITCHING 8 FEEDER + STACKER APOLLO 1540 used, as new conditions, age 2003-2005 composed by STITCHING UNIT 1550 NR. 4 DOUBLE KOMPACT FEEDER 1551 NR.1 COVER FEEDER 1528 NR.1 TRIMMER 1522 Bsdeyylnmspfx Abtoll NR.1 STACKER APOLLO 1540 NR.3 COMPRESSOR RIETSCHLE KTA 80 OPTIONAL: lenght and stitching control small format within 98x60 mm on feeder small format within 98 mm on trimmer

Condition: ready for operation (used), 1 x Stitching unit 380 with Amrys 2 x Stitching headsd HK75 Bedpfjxya Eqjx Abtsll 1 x Caliper control with reject 1 x Obluque sheet saddle monitor 1 x Remote control jogger inch 5 x Section feeders 370 with Amrys 1 x Cover folder feeder 554 with Amrys 1 x Three knife trimmer 449 with Amrys 1 x Muller Martini Perfetto stacker delivery 450

Condition: excellent (used), Year of construction: 2007, operating hours: 15,700 h, functionality: fully functional, Equipment: compressor, documentation/manual, Müller Martin Sammelhefter Bravo Plus T comprising: 4 x double feeders 1555.0403 incl. ASIR, 1 x folding feeder 1529.0417, 1 x Semko 0333.0435 (year 2018), 1 x stitching machine 0380.0450, 1 x three-knife trimmer 0449.0430. Includes DruVa pumps, optional PIAB. Blodpfxeyamrls Abtsl

Condition: ready for operation (used), 1 x stitching unit 380 2 x stitching heads HK75Q 1 x Touch screen Navigation control 1 x oblique sheet saddle monitor 1 x remote control inch 4 x section feeders 370 1 x cover folder feeder 1529 Bjdpfx Abjyuk S Sstell 1 x three knife trimmer 449 1 x stream delivery 1564 Optional; 2 x loop stitching heads 1 x Rima stacker

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10024150, Sewing machine Muller Martini Ventura MC-200, Machine speed* Mechanical of 18 to 200 cycles/min, max. 12 000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, Lap opening min. 8 mm, low or high folio lap, Stitches Number of stitches standard 13, staggered 14, Stitch length 16.5 mm with/without blind stitch possible for all stitch types Sewing machine Muller Martini MC 200 Bodpjx Rywkofx Abtsll

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Müller Martini Primera C130 gathering machine Year of manufacture: 2007 (2013) - 6 flat-pile feeders 0379 (2013) - sequential on/off switching - 1 cover feeder 0507 (2013) - ASIR 3 - SEMKO at the front and rear - First copy control - 1 stitching head 0383 (retrofitted, status 2013) - 2 standard stitching heads HK 75Q - 2 loop stitching heads HK Oe Q6/8 Bedpfx Aozdytcobtjll - 1 three-knife trimmer 0449 (retrofitted, status 2013) - 1 central trimming unit - 1 cross-laying unit Perfetto - PIAB air system

Condition: ready for operation (used), 1 x stitching unit HS350 2 x stitching heads Hohner 52/8  Bsdpfxoir A Ixs Abtell 6 x section feeders ( 5 x verticle, 1 x flat) 1 x cover folder feeder UFA350 1 x three knife trimmer TR350 1 x stacker delivery

Condition: ready for operation (used), 1 x stitching unit 1550 2 x stitching heads HK75 Bodsir A D Hspfx Abtjll 4 x section feeders ( 2 twin) 1551 2 x hand feeding station 1 x Three knife trimmer 1522 1 x delivery

Condition: good (used), Year of construction: 2012, Built in 2012 Size max 330 x 250 mm Size trimmed max 330 x 250 mm min 200 x 148 mm Size trimmed without lap max 340 x 260 mm booklet thickness 4-6 mm Mechanical Speed max 22.000 t/h Equipment crane system • 2 Bundle clamps gathering chain & feeders • 8 stations gathering chain • 6 feeders 0416.0440 • 6 streamfeeders 3738 with extensions • 1 Card gluer 423 • 1 Semko • 3 ELTEX static devices stitching unit 410.0425 • 2 stitching heads three knife trimmer • three knife trimmer 304 knives • 2 sets of knives controls • automatic selfajusting calipers ASAC • signature reading system ASIR • automatic make ready system Amrys Pick up station with chain and delivery station Inserter • Müller Martini Integro • 4 stations • reject unit • transfer unit Addressing unit • Sitma 930-A Stacker Bledpfx Aotryhfsbtel • Müller Martini Robusto 451 Electrostatic Blocker • Müller Martini 457 Condition Very good working condition can been tested

Condition: ready for operation (used), 1 x stitching unit 1558 6 x section feeders 1559 1 x cover feeder 1528 1 x three knife trimmer 1522 Bodeir A D Rjpfx Abtsll 1 x stream delivery 225

Condition: ready for operation (used), 1 x stitching unit - 380 2 x stitching heads HK75Q 1 x remote control jogger inch 1 x oblique sheet saddle monitor 6 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stacker delivery - Perfetto 450   Optional if needed; Centre cut for double production small size attachment for feeders additional stitching heads  Bljdpfx Abexxnlpotsl

Condition: good (used), functionality: fully functional, Size: max 340 x 260 mm; min 90 x 115 mm Size (without lap): max 340 x 250 mm; min 90 x 115 mm lap: max 15 mm folio lap: min 6 mm low folio lap: min 8 mm Product size, stitching unit: max 340 x 260 mm; min 210 x 155 mm booklet thickness: max 6 mm Mechanical speed 1:1: max 25,000 t/h Mechanical speed 1:2: max 30,000 t/h equipment gathering chain & feeder - 8 station gathering track - 8 single base - 6 feeders 416 - product gluer 423 stitching unit - stitching unit 430 - 15" inch chain pitch - wire unwind device - thickness control/ plus-minus - 4 stitching heads three knife trimmer - three knife trimmer 426 knives - 2 sets of knives delivery - compensating stacker Robusto optional Equipment: --- not included --- - crane system - bundle feeder - print roll feeder - additional stations - card gluer - div. conveyor belts - compensating stacker - strapping machines - wrapping machines - palletizer Bsdpfxju S Ncbj Abtell

Condition: ready for operation (used), MM 360 - 2 up trimmer kit, castings only ! Blsdsir A E Iepfx Abtol

Condition: good (used), Year of construction: 2008, Year of manufacture: 2008 Technical specifications: • Max. size: 330 x 250 mm • Min. size: 200 x 148 mm • Max. trimmed size: 330 x 250 mm • Max. trimmed size without lap: 340 x 260 mm • Booklet thickness: 4–6 mm • Mechanical speed: max. 22,000 cycles/hour Equipment: Feeding & gathering: - 2 bundle clamps - 6 stations gathering chain - 5 feeders 416 - 5 Stream feeders 3738 with extensions - 1 Semko - 3 ELTEX static control devices Stitching unit: - Type 410 - 2 stitching heads Trimming: - Three-knife trimmer 304 Controls: Signature reading system (ASIR) Option not included in the price - Extra feeders - Stream feeders Bjdezbulvopfx Abtjll - Card gluers 423 - Inserter - stackers CONDITION OF THE MACHINE, cleaned, good working condition

Condition: good (used), Year of construction: 2007, Handfeeder 3 x Horizontal Feeder DHU 450 3 x Vertikal Feeder DVU 450 Stitching Unit 450 Three Knife Trimmer TR450 Trimmer with center knife device 1 Cover Feeder CHU 450 Pumps Heidelberg Stacker Delivery CHA Stacker RIMA Thickness Control Automatic Blsdew U Tcyspfx Abtol

Condition: used, functionality: limited functionality, Machine Package – 5 Post-Press Processing Machines in a Bundle Complete package for only €3,000.00 net For sale is a machine package from post-press processing. The machines are sold exclusively as a bundle and are ideally suited as a source of spare parts, for workshops, collectors, or for further use after appropriate inspection. Included in the scope of delivery: Folding machine Manufacturer: MBO Type: T500-1-500/4F Wiring diagram: 35.1901.14 Bljdpoznvlvofx Abtjl Machine number: N07/09 Stack delivery system Manufacturer: Multinak Type: S Machine number: 2151000 / 893025 Banding machine Manufacturer: Band-All Type: 32 Machine number: 659847 Gathering machine (8 stations) with stitching unit Manufacturer: TB Sprint Type: 303 CS Machine number: 303 CS 2816 Chase A4 Manufacturer: Heidelberger Price: €3,000.00 net for the complete machine package. Inspection possible by appointment. Loading and transport are the responsibility of the buyer. We will gladly send additional information or photos upon request. Private sale excluded. Sale is ex-warehouse. Subject to errors and prior sale.

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys Bedpfx Abevpaubjtoll 2 x stitching heads HK75 6 x section feeders 370 with Amrys ASIR3 1 x cover folder feeder 1554 with Amrys 1 x three knife trimmer 449 with Amrys 1 x OMG stacker delivery

Condition: ready for operation (used), Size max 480 x 320 mm Size untrimmed with lap max 480 x 320 mm Size untrimmed without lap max 440 x 290 mm Bledpfed Ir Izjx Abtsl Size trimmed with lap max 470 x 300 mm Size trimmed without lap max 430 x 295 mm min 148 x 75 mm Speed max 10.000 c/h Equipment stitching unit • stitching unit 321 • thickness control/ plus-minus • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 890 knives • 2 sets of knives

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, 6 mooring posts 1 manual mooring post 1 swivel mooring post Clamp Three-blade propeller Standard equipment Bodpfxjzrvhxo Abtoll

Condition: ready for operation (used), 1 x stitching unit 1550 2 x stitching heads HK75            ONLY 3,800 hours 1 x SEMKO side caliper with reject 6 x section feeders 1551 1 x cover folder feeder 1528 Bjdpfx Abjv Ap Iwetjll 1 x three knife trimmer 1565 1 x stream delivery 1564

Condition: used, Year of construction: 2019, !WARNING: TECHNICAL SPECIFICATIONS ARE BASED ON THE DATA SHEET, THESE HAVE NOT BEEN VERIFIED. INSPECTION IS RECOMMENDED. Input format: 4-page sheets, minimum 180 x 105 mm, maximum 550 x 350 mm. Finished format (brochure): minimum 90 x 105 mm, maximum 305 x 350 mm. Brochure thickness: maximum 76 pages. Speed: maximum 6,000 cycles/hour. Machine dimensions: 6500 x 850 x 1700 mm (L x W x H). Blsdpfszqzclex Abtel

Condition: used, Year of construction: 1989, Sammelhefter / Saddle Stitcher Müller Martini 335Year 1989 7 Feeder Type 306 Blsdpfx Aeq Rhx Sobtjl Umschlaganleger / Cover Feeder Type 344.0400 Heftstation / Stitching unit Bravo Plus Typ 335.0401 Dreischneider / Three Knife Trimmer 890.8400 Kreuzleger / Compensating Counter Stacker 2 Compressors - Manuals all included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test