Used Pastry Shop for sale (7,244)

Condition: good (used), 926 USED Shop, confectionery, shelf, electric oven. Bjdpfsuiwvkjx Addsdk 2-chamber oven for 60x40 sheets, has a shelf for sheets. TECHNICAL DATA - number of baking chambers: 2 - each chamber is equipped with a steam option, - equipped with: proofer, shelf for sheets and hood. EXTERNAL DIMENSIONS (in cm) - Width: 97 cm - Length: 100 cm - Height: 190 cm (with hood: 216 cm) CHMABER DIMENSIONS (in cm) - 60 x 47 x 16 cm (for 1 60 x 40 cm baking tray) The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: Bdsdpfx Adowzl Hxjdsk The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: good (used), Counting scale, scale, digital scale, market scale, shop scale, price calculation scale -Manufacturer: EXA, market scale shop scale -Type: E 10 -Weighing range: max. 10 kg -Display:Price / kg / Tare, double-sided display -Dimensions: 320/310/H120 mm -Own weight: 3 kg Bedpfx Adsw S T D Esdjdk

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m Bdjdsmqkt Tepfx Addok bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Condition: used, functionality: fully functional, Painting line/spray hook conveyor with 19 hooks, continuous loop, consisting of 2 rails of 5000 mm each, 2 rails of 800 mm each, with 4 bends. Available at the beginning of August. Bdedpjw Eb Rhsfx Addjk

Condition: used, functionality: fully functional, mileage: 47,380 km, power: 88 kW (119.65 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 02/2020, next inspection (TÜV): 01/2027, loading space length: 3,500 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, emission class: euro6, fuel: diesel, Equipment: ABS, soot filter, Food Truck Sprinter Mercedes Top Mint. The following equipment is installed: 2 m extractor hood. Hygiene package with double sink, boiler and water on a canister system Electrical fuse box. Led swivel spotlight High glass refrigerator. Industrial cast material floor in the shape of a tub installed in accordance with hygiene regulations. Bjdpfjvvl D Iox Addedk 2 x retro lighting for your price board in the front. Stainless steel cladding Further equipment possible according to customer requirements Installation of catering equipment/gas system Furniture installation and labeling possible by us. We would also be happy to provide you with financing offers for your food truck. “Leasing for start-ups and young entrepreneurs” possible!! We are a 2nd generation vehicle construction master specialist company. Over 30 years of experience in vehicle construction for mobile sales!!!! 1 year warranty on engine and gearbox optional. (Application Germany) More vehicles on our website. w w w . Helmig-Verkaufsfahrzeuge.de Inquiries are also welcome. Constantly more vehicles in stock!!! This vehicle is available from. Possible to be sold between now and then. We are also happy to deliver your vehicle nationwide/Austria and Switzerland. (subject to additional charge)

Condition: excellent (used), 774 USED Wabama shop bread slicer. The device is operational, after inspection. TECHNICAL DATA: - 230V power supply - slice thickness 9 mm EXTERNAL DIMENSIONS (in cm): - width 58 - length 80 - height 124 Bedpfer Nf N Tox Addedk The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, Pony 7000 Sales Price List Paint booth 7 x 4 x 3 meters • Reinforced partial grating 5 mm • Height 3 meters (Sprinter height) • 2 x 7.5 kW motors (belt drive) • ATEX ceiling lighting • 24,000 m³/h • Incl. 2 drive-on ramps for above-floor version • Above-floor and in-ground version at same base price Base price: €28,900 Base price for 2.76 meter height version minus €1,000 (passenger car height) Base price for 3.5 meter height version plus €1,000 (motorhome height) Door-in-door system: €1,800 Bdodpfowzmcbox Addsk Double glazed doors: €1,800 11 kW motor incl. larger fans and enhanced control cabinet with direct drive: €7,770 15 kW motor incl. larger fans and enhanced control cabinet with direct drive: €8,610 Side lighting: €2,870 Ceiling lighting EX protection according to ATEX: €1,470 Full light-duty grating: €1,785 Full heavy-duty grating, reinforced 5 mm: €2,990 Direct drive with PLC control for 11 kW motors (incl. soft start): €15,120 Direct drive with PLC control for 15 kW motors (incl. soft start): €17,640 Soft start for 7.5 kW motor (belt drive only): €1,239 PLC control for 7.5 kW 24k m³/h motors with 3-stage energy saving program: €5,670 PLC control for 11 kW 30k m³/h motors with 3-stage energy saving program: €7,770 PLC control for 15 kW 30k m³/h motors with 3-stage energy saving program: €8,610 PLC control for 2 x 5.5 kW 36k m³/h (belt drive) motors with 3-stage energy saving program: €5,565 Pneumatic drive-on ramp: €4,900 Grating modification for lift: €1,785 Pass-through system with double gates (without door-in-door): €3,250 Tri Axis ramp: €7,980 Second service door (position freely selectable): €1,150 Info: 11 kW motor set at 1,200 rpm (inverter) (1,000 rpm motor) achieves 36,000 m³/h

Condition: used, inner dimension height: 1,950 mm, inner dimension width: 1,850 mm, No. 3230 Complete paint shop Wagner Rafi / Wildcat / Finish 104 B Ex Used Complete spray room equipment Spray wall Rafi mobile 1850 x 1950 mm width x height 2 drying trolleys 1 spray gun Wagner Wildcat / IceBreaker motor / pump type 18 - 40 1 Wagner Finish 104 B Ex sprayer Sale by customer order, ex location near 69124 Heidelberg, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Bdodpfx Adjwn Tvuedsk Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR Bdedpfomqkubjx Addok type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Condition: reconditioned (used), Year of construction: 1992, The automatic machine is after a major overhaul the whole structure was sandblasted and repainted in 2013/2014. The control system, automation, inverters have been replaced - with brand new ones, by a company specializing in automatic paint machines. The control is in Polish - touchscreen controller, very intuitive. BDB condition - everything is in working order. The automatic machine consists of: - integrated feeding table, - blowing section additionally equipped with deionizers before and after blowing, - scanner - transmission belt (the belt is relatively new - it worked for a few months until it was taken out of machine from use) - water-jacketed spray booth equipped with 4 Kremlin ATX guns, - integrated receiving table - belt washing unit with rollers and squeegees and a diaphragm pump for water circulation - skimmer for water purification. - paint recovery The automatic machine is sold without a pump. There is a possibility to test the automat at our plant. The machine is operational, we sell because we needed a more efficient (faster) machine. Bjdpfx Ader Eratjdjdk The machine is not disassembled, but it is out of service - you can come to connect the pump and run it. The machine can be converted to a "dry" version , without a water jacket.

Year of construction: 2011, condition: excellent (used), 788 USED shop, confectionery, electric oven UNOX. The oven is divided into lower and upper. Bsdpfx Adotxbhxedodk TECHNICAL DATA: - number of baking trays: lower: 4, upper: 6 - year of production: 2011 - power: lower: 7.6 kW, upper: 10.1 kW EQUIPMENT: - hood - steaming - spare parts visible in the photos for free The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Bdjdpexa H Ewjfx Addek (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE Bdedpfx Aomqkuueddjk • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2011, condition: excellent (used), 784 USED shop, confectionery, electric oven UNOX. The oven is divided into lower and upper. TECHNICAL DATA: - number of baking trays: lower: 4, upper: 6 - year of production: 2011 - power: lower: 7.6 kW, upper: 10.1 kW EQUIPMENT: - hood - steaming - spare parts visible in the photos for free The device is available to verify in our warehouse (36-068 Bachórz, Poland). Bodpfx Adstxbg Uededk Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you! Bjdoxa Hzxspfx Addodk

Year of construction: 2011, condition: excellent (used), 783 USED shop, confectionery, electric oven UNOX. The oven is divided into lower and upper. Bdodpfx Ajtxbfqoddjk TECHNICAL DATA: - number of baking trays: lower: 4, upper: 6 - year of production: 2011 - power: lower: 7.6 kW, upper: 10.1 kW EQUIPMENT: - hood - steaming - spare parts visible in the photos for free The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process. Bsdpfx Ajxa Hx Roddjdk

Condition: excellent (used), 705 USED Fridrich electric shelf oven, shop, confectionery. EXTERNAL DIMENSIONS (in cm): - width 90, - depth 118, - height 217, CHAMBER DIMENSIONS (in cm): - width 60, - depth 50. EQUIPMENT: - 4 chambers - hood - fogging of each chamber - proofer 60x40. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Bodpfxjrdvqmj Addjdk The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 2024, Please find attached information about our powder coating and wet painting line, which we established last year in the Izmir Free Trade Zone. The facility is designed for bicycle painting. The dimensions are 680 × 680 × 2100 mm (L × W × H). Plant components: 1. 5-stage pretreatment washer, 2-stage plate heat exchanger, and heated stainless steel sheet 316 1.1. Water drying tunnel with reversing function, 135 m 1.2. Control panel 1.3. Medium-duty overhead conveyor 2.1. Label curing oven and conveyor belt, 75 m 2.2. Labeling area with air-conditioned roof and conveyor belt Bdsdpfjxa Expex Addek 3.1. Powder coating system, 135 m 3.2. Powder curing oven with 2 reversing functions 3.3. Powder spray booths not included; two Wagner powder spray booths 3.4. Medium-duty overhead conveyor 4.1. Wet painting system 4.2. Powder coating oven 4.3. Wet spray oven 4.4. Exhaust ventilation 4.5. Four wet paint spray booths 4.6. Two air-conditioned mixing rooms 4.7. 290 m conveyor belt 5.1. Label application system, 90 m 5.2. Air-conditioned area in the roof The facility cost €2,800,000.00 as new. This is a fully automatic powder and wet paint line. Individual components can also be purchased. If you are interested, please do not hesitate to contact us.

Year of construction: 2010, condition: good (used), 928 USED Shop, confectionery, shelf, electric oven. TECHNICAL DATA - number of baking chambers: 3 - each chamber is equipped with a steam option, - equipped with: proofer. Bdodpfxouiw D Uj Addsk EXTERNAL DIMENSIONS (in cm): - W: 98, - H: 224, - L: 98. CHAMBER DIMENSIONS (in cm.) - W: 60, - L 48 - H: 18/15/15. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: good (used), 920 USED Miwe Aeromat oven for 60x40 trays. Bjdpsuigh Nsfx Addsdk EXTERNAL DIMENSIONS (in cm.) - W: 90 - H: 197 - L: 106 (with hood: 137) TECHNICAL DATA: - 4 baking trays 60x40, - module: shelves, - without proofing chamber, - steaming, - hood. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: excellent (used), 612 USED shop oven WP Brilant for 5 trays 60x40. EXTERNAL DIMENSIONS (in cm): - W: 93 - L: 130 - H: 212. EQUIPMENT: - hood - fogging - base with shelves TECHNICAL DATA: - power: 7.5 kW - steaming: 1.5 kW The device is available to verify in our warehouse (36-068 Bachórz, Poland). Bdedjm Uyimjpfx Addek Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN.

Condition: excellent (used), 986 USED Bakery, shop oven with proofer and shelves. The oven and proofer have steam. TECHNICAL DATA: - tray dimensions: 60x40, - oven: number of shelves: 4, - proofer: number of shelves: 8 EXTERNAL DIMENSIONS (in cm.): - W: 81, - L: 88, - H: 187. Bsdpfx Aovq Nffoddodk The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), 984 USED Bakery, shop oven, Wiesheu with proofer. IMPORTANT: The oven and proofer have steam. TECHNICAL DATA Bedpsvqbh Ssfx Addsdk - oven: number of shelves: 4, - shelf dimensions: 60x40, - proofer: number of shelves: 8, - each chamber is equipped with a steam option, EXTERNAL DIMENSIONS (in cm): - W: 85, - H: 172, - L: 90. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.