Used Patel Automation for sale (11,216)

Condition: good (used), WSM Stationary Screwdriving Unit Screwdriving Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with tumbler(interlock). The doors are locked in automatic mode and can only be opened in automatic mode or in manual mode after pressing the Doors button on the control panel. Automatic mode cannot be started when the door is open. Function sequence The station is loaded with the pre-assembled module via the transfer conveyor. The operating steps of the automatic station with the passage of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning of the WT with the preassembled assembly in St.2.1 - Lowering of the beam with the scanners and the vision sensor - Scanning of the 3 codes (front panel, front LP, SD LP), comparison with the database - Checking the correct latching of the FFC in the connector - Lifting the carrier and lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in St.2.2 Giodpfxeibichj Ah Hol - Positioning of the screwdriver and screwing of the front LP - Lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in pc.2.3 - Lowering of the light protection cover and contacting, positioning of the carrier with the test sensors from below - type-dependent testing of the SD + CD lighting slots and pushbuttons - Function test CD eject button - Lowering the WT onto the conveyor > continue If faults occur during the test, they are indicated on the display and can be rectified if possible. To do this, switch to manual mode and open the doors. After the repair and starting of the automatic system, the WT is tested again in the station. If no repair is possible (e.g. screw fault), the WT is marked as NOK in the control system and is not processed further. Manual NOK marking and ejection is also possible.

Condition: used, Stöger Automation PESCE S&S bowl feeder 230V Gisdpfxswcar So Ah Hel

Condition: new, 250kg Welding Positioner Turning Capacity: 250kg at 300mm Tilting Capacity: 250kg at 300mm Rotation Speed / Power: 0-4rpm at 0-90v / DC200w Tilt Range / Power: 0-135° in 30sec/ DC500W Rotation Drive Control: DC Motor Card Table Size: Ø500 x 20t c/w 4 slots Earthing: 300A Gisdpfxstzan Ne Ah Hsl

Condition: new, Year of construction: 2024, Sifise Compact Industrial Palletizer Our state-of-the-art #palletizers are designed to streamline your production line and improve your workflow. With precision #engineering and advanced #technology, they can handle a wide variety of #products and pallet configurations, reducing the #risk of human error and increasing #productivity. Key Features: ✅ Space-saving design, also perfect for smaller production areas ✅ High-speed palletizing capabilities, increasing output and productivity Gedpfx Ahema Ruxe Hoil ✅ Intelligent software for precise stacking and stability ✅ Easy-to-use interface, ensuring seamless integration into your existing systems ✅ Customizable options to meet your specific needs Say goodbye to the physical strain and repetitive motion injuries associated with manual palletizing, and say hello to a safer, more efficient way of working. Trust Sifise automation for all your palletizing needs.

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 3,000 kg, faceplate diameter: 1,020 mm, welding current (max.): 600 A, swivel angle A-axis (max.): 135 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Load capacity: 3,000 kg Center of gravity distance / Eccentricity: 150 mm / 150 mm Maximum tilt angle: 135° Tilt speed: 60 s Rotation speed: 0.033 – 0.66 rpm Dimensions of faceplate Height of top edge of faceplate (horizontal): 797 – 1,820 mm Height of faceplate rotation axis (vertical): 850 – 1,650 mm Diameter of faceplate: 1,020 mm Grooves on faceplate: 4 × 18 mm Operation Handheld remote control: Robust industrial handheld remote control with all operating functions MACHINE DETAILS Weight: 1,800 kg Installation dimensions: 2,100 × 1,300 × 1,050 mm Electrical Specifications Max. welding current: 600 A Input voltage: 380 – 400 V / 3 Ph / 50 – 60 Hz Dimensions as per sketch Gedpfx Ajwbqmdjh Heil Total height (maximum): ~2072 mm Maximum height of the center of the axis: ~1472 mm Minimum height of the center of the axis: 650 mm Distance from floor to table top edge: 797 mm Distance from table top edge to center of the axis: 147 mm Rear foot height: 100 mm Outer diameter of rotary table: Ø1200 mm Pitch circle diameter (PCD): Ø489 mm Number of mounting holes: 4 x M16 thread Angle segments on rotary table: 120°, 45° EQUIPMENT - Industrial handheld remote control

Condition: not inspected (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: 10387A, input voltage: 400 V, type of input current: AC, Recently acquired through site purchase. Automatic robotic fruit packaging machine Utilizes three Staubli TS60 robotic arms See images for details Buyer to arrange for collection Giedpfx Asxcndgeh Hol

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 400 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: max, laser hours: 250 h, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 3,050 mm, working length: 1,520 mm, working width: 30 mm, working height: 100 mm, travel distance X-axis: 1,520 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 120 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 18 m/min, cutting speed: 30 mm/min, positioning speed: 80 m/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 1,500 kg, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 7 bar, overall weight: 4,500 kg, total length: 5,500 mm, total width: 2,300 mm, total height: 2,490 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, Ex-demo machine, 3kw fiber laser, running great, we are just making room for new machines, comes with a 1-year warranty. Any questions or to arrange a viewing, please ask. Gjdpfsxghbtex Ah Hsil

Condition: new, 3t Conventional Welding Rotator Set Item: Drive / Idler Rotator Set Load Capacity Each: 1.5MT Total Rotation Capacity: 4.5MT Giedpfxotqn Ufo Ah Hel Vessel Size Min: Φ286mm at 60° included angle Vessel Size Max: Φ1000mm at 60° included angle Tyre Type & Size: Vulcanised PU, Φ245mm x75mm Roller Speed: 400-4000mm/min

Condition: ready for operation (used), Year of construction: 2011, Control Unit Brand HEIDENHAIN Model TNC 430 Main Drive Spindle speed range 15000 Number of axis 5 Movement X-Axis Feed Force 30000 m/min Y-Axis Feed Force 30000 m/min Z-Axis Feed Force 30000 m/min Media Chip conveyor Yes Gsdpfx Ahsx D Iywj Hoil Additional Equipment Oil mist extraction Electronic handwheel Chip flushing gun Machine bed flushing NC swivel table Blow-off device Closed roof 200-liter coolant tank Includes 24 pallets and MTS-Chuck S-P/A clamping device. This 5-axis HERMLE C 600-U + EROWA Robot easy automation was manufactured in 2001. It features a 24-position magazine, extended X-axis of 2010 mm, C-axis rotary table, spindle speed up to 15,000 rpm, and a 30 tool capacity. Includes a chip conveyor and a 200-liter coolant tank. If you are looking to get high-quality automation capabilities consider the HERMLE C 600-U machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: good (used), For sale are various automation components and accessories Our warehouse is equipped with: - conveyor belts - spiral conveyors - placement machines - handlings - ascending conveyors - robots - transport rollers UVM Ask for our catalog our employees will be glad to advise you loading & or dispatch Europe-wide against surcharge possible Prices plus value added tax Viewing by appointment possible. Contact us, our team is happy to help you. Trade-in or exchange possible! Giodpfx Aenr Hfvjh Hel Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), functionality: fully functional, The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetting system and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin column kits. The QIAcube comes preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded for free. In addition, custom protocols tailored to your specific application requirements can also be requested. The QIAcube is well suited for academic research laboratories and pharmaceutical, biotechnology and biomedical research laboratories performing applications such as: Sequencing / sequencing analysis Giodpsvzr Nbofx Ah Hol Gene expression analysis genotyping proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (non-condensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28 ° C Pipetting system: Syringe size 1 ml, pipetting range 5-900 μl Samples per run: 1-12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range room temperature to 70°C, ramp time of

Condition: ready for operation (used), B&R Automation 8MSA3M.E3-30 servo motor Rev. D0 SN:68320217821, used, normal signs of use, 100% functional, scope of delivery as per photos Gisdpfxskwig Ue Ah Hjl

Condition: excellent (used), LINE of Double-Side Sizing-Milling & Edge Banding (also "SOFTFORMING") with automatic handling. Max. panel thickness 100 mm. Composed by the following machines: W05025A) Automatic LOADER (portal / gantry) "MAHROS" Mod. Brush W05025B) Double-side Sizing and Edge Bander "HOMAG" Mod. KFL 620/23/QE/30 (softforming) SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE BANDING PART (for each side): Glueing Unit (EVA glue with pre-melter) Edge coils supporting unit (No. of reels) 1 pressure zone for both STRAIGHT and SOFTFORMING Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) Fine Trimming Unit (2 x 0,55 KW) Corner-rounding unit FF12 (4 motors) WD70 Gedpjtt Dqpefx Ah Hsil Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11 W05025C) Automatic UNLOADER-STACKER (portal / gantry) "MAHROS" Mod. Brush

Year of construction: 2020, operating hours: 200 h, condition: ready for operation (used), General Data Measurements width 9000 mm Measurements depth 4375 mm Measurements height 1545 mm Machine weight 1200 kg Gedpfxex Nkmas Ah Hoil This TOP Automazioni FUSION 352 SX was manufactured in 2020. It is a single-channel bar feeder supporting bar lengths up to 3200 mm and diameters from 8 to 50 mm. Features include a tray width of 235 mm and a manual axial shift for easy spindle access. Dimensions are 4375 x 9000 x 1545 mm, weighing 1200 kg. Consider the opportunity to buy this TOP Automazioni FUSION 352 SX. Contact us for more information. Application Types Other Automation Equipment

Year of construction: 2013, condition: excellent (used), For sale is an automation robot of the brand Yaskawa and the type MH50 together with power cabinet and DX100 control system. The system was built by Krauss Maffei and used on a Netstal injection molding machine to sort parts. Operating manuals for DX100 control and operating and maintenance manuals for MH50 Digital available Technical data MH50: Position Model YASKAWA-MH50 Operating hours: approx. 14.000 Year of construction: 2013 Body: Standing Number of axles: 6 Gedsn E Nhpopfx Ah Hjil Load capacity: 50 kg repeatability: ±0,07 mm Working range S-axis (rotation): ±180° L-axis (lower arm): +135°, -90° U-axis (upper arm): +251°, -170° R-axis (hand roll): ±360° B-axis (wrist rotation/bend): +125° T-axis (hand rotation): ±360° Maximum speed S-axis: 3.14 rad/s, 180 °/s L axis: 3.11 rad/s, 178 °/s U axis: 3.11 rad/s, 178 °/s R axis: 4.36 rad/s, 250 °/s B axis: 4.36 rad/s, 250 °/s T axis: 6.28 rad/s, 360 °/s Permissible torque R-axis: 216 Nm B axis: 216 Nm T axis: 147 Nm Permissible moment of inertia (GD2/4) R axis: 28 kgm2 B axis: 28 kgm2 T-axis: 11 kgm2 Weight approx. 550 kg Dimensions: See pictures On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: ready for operation (used), B&R Automation 8MSA3M.E3-30 servo motor Rev. D0 SN:68320217820, used, normal signs of use, 100% functional, scope of delivery as per photos Gisdpfx Ahewta Iuj Hol

Year of construction: 2009, condition: ready for operation (used), number of axes: 2, Main Drive Number of axis 2 Giodpfx Ahjx D H D Uo Hjl This SCHÜCO ISOMAT 5 was manufactured in 2009. It features a robust machine construction, 10 lateral guide rollers, and a quick release mechanism on all guide rollers. Capable of processing profiles with depths up to 250 mm and heights up to 400 mm, it includes an ergonomically designed control panel and a safety cage for optimal operator safety. Reach out for more information. Application Types Other Automation Equipment

Condition: good (used), Year of construction: 2000, functionality: fully functional, overall weight: 49 kg, load capacity: 8 kg, arm reach: 500 mm, controller manufacturer: Bosch, controller model: Rho 4.1, For sale are 2 Rexroth robot systems in good condition, which can be offered individually or as a package Technical data: Tripod length: 500 stroke*quill: 200*25 mm Device connection: continuous User setting: standard Giedpfx Aherrvhge Hjl PN pressure: max 8 bar Load: max 8 kg Weight: 48.5 kg Control included No teach panel available On request, transport can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), B&R 5AP820.1505-00 Automation Panel 800 with 1-00 keyboard + 3-03 keyboard extension, used, in good condition, 100% functional, scope of delivery as shown in photos. Giedpex Equ Njfx Ah Hol

Year of construction: 2022, condition: ready for operation (used), This ITEM Montageplatz Venta was manufactured in 2022. It features a drive-free goods carrier assembly system based on the Karakuri principle, with an automated product carrier return. The modular design allows for easy modifications, adhering to standardized industry standards. It includes an ESD floor and two Deprag screwdrivers controlled via worker guidance. Contact us for more information about this machine. Application Types Gsdpfx Ajx H A Nzjh Heil Other Automation Equipment

Year of construction: 2017, condition: ready for operation (used), General Data Machine weight 3750 kg This Toyota 06-8FG20F was manufactured in 2017. A robust used forklift with a lift capacity of 2000 kg and a triplex mast type, it reaches up to 4700 mm. It features an LPG drive, 1200 mm forks, and super-elastic tires. Ideal for heavy lifting with 5,608.2 operating hours. Consider the opportunity to buy this Toyota 06-8FG20F forklift. Contact us for more information about this machine. Application Types Giodpfex D Ntljx Ah Hsl Other Automation Equipment

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 2030mm Measurements depth 4040mm This TRUMPF STOPA LiftMasterCompact was manufactured in 2015. It is a robust automation system designed for efficient material handling and storage. Ideal for streamlining operations in various industrial environments. Contact us for more information about this machine. Godpfx Ahsx D Ibuj Hjil Application Types Other Automation Equipment

Year of construction: 2019, condition: ready for operation (used), This TGT Robby 900 XL was manufactured in 2019. It features a Palfinger crane 1500, a forklift lift of 1.8 m, and a Honda engine. The machine is installed on a crawler chassis with a telescopic width and offers a working height of approximately 6.5 m. It has a crane load capacity of up to 900 kg and a fork load capacity of 2000 kg. Contact us for more information about this machine. Application Types Godpox D Htvefx Ah Hjil Other Automation Equipment

Year of construction: 2024, condition: ready for operation (used), This MIRECS EasyLift was manufactured in 2024. It features a stable base plate for secure anchoring, a Demag Chain Hoist DCBS with a balancer for precise load handling, and a load capacity of 150 KG. The vertical stroke reaches up to 1,500 mm with a total height of 3,000 mm. Ideal for stationary applications requiring robust and precise lifting solutions. Contact us for more information about this machine. Application Types Giedpfxsx D Rbde Ah Hel Other Automation Equipment

Year of construction: 2017, condition: ready for operation (used), This LNS Quick Load Servo 3 was manufactured in 2017. It features a weight of 570 kg, dimensions of 2048 mm in length, 1486 mm in width, and an adjustable height between 1248 and 1748 mm. It supports a maximum bar diameter of 120 mm and a bar length up to 1600 mm. With a loading cycle time as low as 4 seconds, it's ideal for high-efficiency operations. Contact us for more information about this machine. Giodpfxex D D H Tj Ah Hsl Application Types Other Automation Equipment