Used Automation Vacum for sale (13,627)

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Hedpfxezd Rmgj Ah Ssnt Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: new, functionality: fully functional, New, unused spare part! B&R Provit 5600 touch panel, Rev. L0 Model 5D5601.03 Hjdpfx Aez Au Iroh Sent Serial No.: 31530168763

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as shown in the photo, used, display film damaged (see photo 2), otherwise normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hnedoi D Uh Ijpfx Ah Sjt

Condition: used, functionality: fully functional, Year of construction: 2005, type of cooling: water, overall weight: 15,000 kg, total length: 10,000 mm, total width: 4,000 mm, total height: 25,000 mm, year of last overhaul: 2024, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, ITEC AG laser cutting system for circuit boards. The system consists of the following components: Hodpfx Aozyzzyjh Sent ITEC AG cell with granite bed, 3-axis Motoman NX 100 robot, vacuum manipulator RIEDEL L 21/8 TR 3.00 cooling system GSW Schwabe AG straightening machine MHR 2.5mm / 1250mm / 7 rollers GSW Schwabe AG coil handling system VRMA 80/76 The circuit boards are fed from the coil (GSW Schwabe AG, MHR 2.5/1250, general overhaul in 2022) into the straightening machine (GSW Schwabe AG, VRMA 80/76). The PDFs with technical data are attached. The laser portal for the TRUMPF TF is mounted on a solid granite bed, which guarantees absolute repeatability. The Motoman robot picks and places components using a vacuum manipulator and camera. The system has been continuously maintained and is in production-ready condition. Before dismantling, the system was cleaned, and all liquids and coolants were evacuated.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating bowl, Sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, Feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Upper bowl diameter: 250 mm Lower bowl diameter: 190 mm Hnsdpfxoxf Urpj Ah Sjt Bowl internal height: approx. 35 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 240 mm Power supply: 230 Volt, 50 Hz. - RNA control unit, model ESG 90, for adjustable vibration speed - The feeder was used for supplying automotive blade fuses Required space Ø x H: 250 x 240 mm Weight: 13.5 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations via mechanical oscillations in the sorting bowl and thus sets the parts in motion.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total width: 2,350 mm, total height: 2,420 mm, total length: 3,600 mm, type of input current: AC, input voltage: 400 V, power: 1.6 kW (2.18 HP), noise level: 75 dB, General: Precise confocal measuring station for optical height and structure measurement. Equipped with confocal sensor PD562 and measuring camera PD563. The system is used for high-resolution surface and geometry measurement. Hnsdpfx Ahsx Ap I He Set

Year of construction: 2026, condition: new, functionality: fully functional, Fully Automatic Board Sorting and Sawing System for Sawmills With its fully automatic board sorting and sawing system, JAC Automation & Robotics GmbH offers a powerful solution for significantly reducing manual operations in sawmills and wood processing companies. The system handles the entire process, from the unsorted raw material stack to the finished, sorted, and stacked boards. A reference system is already in successful operation at a sawmill. Your advantages • fully automatic and autonomous system operation • significant reduction in manual handling • relief from personnel shortages • fewer errors due to incorrect sorting • reproducible quality • automatic stacking • flexible allocation based on length and width • automatic defect detection • modular, expandable design In the current manual process, an employee may have to pick up and move a board up to four times. With the automated system, this handling is completely eliminated. Workpiece range • Length: approx. 1,700–5,200 mm • Width: approx. 95–310 mm • Thickness: approx. 30 mm • other dimensions available upon request Automatic process The raw boards are picked up by a KUKA robot and automatically fed to the measuring and sawing station. Length and width are determined using laser sensors. In addition, boards that are too severely warped can be detected and automatically sorted out. Each board can be sawn at both ends. Alternatively, a pure sorting operation without sawing is also possible. Sawdust and waste are automatically transported via a chute and a conveyor belt to a waste container located outside the system. Flexible sorting The reference system has: • 10 freely configurable sorting and stacking locations • 2 reject locations • 2 raw material locations The operator can freely define which length and width ranges are placed on which stacking location. The finished boards are stacked fully automatically. Optionally, intermediate strips can be inserted between the individual layers. Hsdpfxjzz Suge Ah Sjnt Performance With a high variety of products, the reference system achieves approximately: • 4 boards per minute • up to approximately 240 boards per hour Technology • 2 × KUKA KR 120 R3900-K • 1 × KUKA linear unit • Siemens S7-1500 • Siemens F-CPU • 19" touch panel • WinCC Runtime • Production and piece count recording • Remote maintenance via Weidmüller router • Safety fence and Keyence light curtains Individually adaptable The system is newly manufactured and planned according to customer specifications. Layout, workpiece range, number of sorting locations, and the range of functions can be adapted. Optionally, an expansion with AI-based camera technology for detecting wood defects and quality characteristics is possible. Reference area: approx. 25 × 15 m JAC handles the complete project management, including design, manufacturing, programming, assembly, commissioning, and training. Delivery time: approx. 6-8 months after technical clarification and order release. Europe-wide delivery and commissioning are possible. Price on request.

Condition: used, functionality: fully functional, overall weight: 1,000 kg, A machine designed to automate the gluing of display units, display stands, crowners and pall boxes. Its strength lies in its versatility. Easy to programme, it will fit into any gluing department seamlessly, causing minimal disruption to the department. Hedpfx Ahsr Hqgxs Ssnt

Condition: used, Technical details: x-travel: 3000 mm Hedpfx Aszu Nhdeh Ssnt y-travel: 1500 mm cutting thickness max.: 32 mm table-size: 3000x1500 mm burner heads: 1 Stück Swift-Cut is part of ESAB Welding & Cutting GmbH. The machine consists of several components: Plasma cutting table: Swift-Cut Plasma power source: Hypertherm MAXPRO200 / 400 V / 3-phase / 50 Hz / Max. output current: 200 A / Input current according to the nameplate: max. 64 A / Mild steel cutting capacity: 32 mm production cutting / 75 mm max. severance cut Extraction system: Keller VARIO-2-KM12-BE30 / Year of manufacture: 2019 *

Year of construction: 2006, condition: used, An industrial welding robot is offered. Reach: 1450mm, payload: 5kg, operating hours: 2213h, welding power source: ESAB AristoMig 500W, max. welding current: 500A, duty cycle: 60% at 500A/100% at 400A, controller type: IRC, robot variant: 1600-5/1.45, controller: IRC. Equipment: ESAB AristoMig 500W welding power source, IRC control cabinet, linear axes/positioner tracks. Weight: approx. 500kg, overall dimensions X/Y/Z: approx. 1200mm/800mm/1600mm. An inspection is possible by arrangement. Hjdpjzy Rv Hefx Ah Sent

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 125102018, Manufacturer: TMA Automation sp. z o.o., Year of production: 2018 SET DESCRIPTION Hnjdpfx Ahozwdx Nj Sst For sale is a complete set of two cooperating Cartesian robots manufactured by the Polish company TMA Automation, designed for use with injection molding machines. The set consists of a MIDI LINE linear robot and a UNI LINE in-mold labeling (IML) module. The robots were used in a production facility and are in a condition confirmed by technical documentation. The sale includes complete documentation. TECHNICAL DATA MIDI LINE robot (serial number: 125102018) Dimensions (L x W x H) 2400 x 2060 x 1435 mm (variable height), Weight 600 kg, Payload 8 kg, Z-axis reach 2300 mm, Y-axis reach 1400 mm, X-axis reach 1400 mm, Supply voltage 400 V / 50 Hz, Power 4.5 kW, Operating air pressure 6.5 bar UNI LINE robot with IML module (serial number: 126102018) Dimensions (L x W x H) 2540 x 1000 (1370) x 2090 mm, Weight 550 kg, Payload 8 kg, Stacker reach 1100 mm, Supply voltage 400 V / 50 Hz, Power 1.5 kW, Operating air pressure 6.5 bar EQUIPMENT INCLUDED Touchscreen control panel with a safety STOP button (e-stop), control software with the following functions: automatic mode, manual mode, no-label mode, no-part removal mode, program archive, graph and alarm module; complete technical documentation, CE marking on both machines. TECHNICAL CONDITION Robots from 2018, operated in industrial conditions (plastics injection molding). Control panel active; at the time of the photographs, program PRG 2 was selected, operating speeds: manual 22%, automatic 17%. The photographs show a red robot stop signal (standby condition, not an emergency). Recommended before purchase: personal inspection and test run at the installation site. SALES CONDITIONS Sold only as a set. Self-collection only. Transportation is the buyer's responsibility.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C Hjdpfxezhub Aj Ah Sent - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: good (used), Cleaning booth for component cleaning using a high-pressure cleaner. Previously used for cleaning components after 3D printing (e.g., for removing support material). Operation via foot switch. In good condition. Hedpfeza T Nksx Ah Ssnt

Year of construction: 2013, condition: good (used), For Sale: Well-maintained in-line system for use behind a Multivac packaging machine. This in-line system ensures a transition from 4 tracks to 1 track and subsequently passes through a metal detector with an ejector. Brand: Automation Systems BV Type: Automation Systems BV in-line robot with a Mettler Toledo metal detector with ejector Robot type: BCE001 Year of manufacture: 2013, voltage: 400 V, 16 A It is possible to inspect this machine on-site. - Transport can be arranged. - Export documents will be provided if necessary. - Proper loading is included. If you have any questions or comments, please do not hesitate to contact us. Hnedpfozt Ib Tox Ah Set

Year of construction: 2023, operating hours: 5,027 h, condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, We are offering this very well-maintained Halter CNC Automation Millstacker Premium 25 handling robot for CNC milling machines, year of manufacture 2023, with very low operating hours. Custom modifications deviating from the standard model that were carried out for us: 1. An individual deposit position (in our case, onto a chute into a water bath) was added as an option. This setup also allows all 12 stacking positions to be loaded with raw parts—whereas when depositing onto the table, only 11 stacking positions can be loaded with raw parts. Hnsdpfxjy Nmmio Ah Sjt 2. Customized adjustment of the angular alignment in the magazine. As a result, longer/larger parts can also be placed lengthwise between the bars when diagonal placement is no longer possible. 3. An additional set of longer support bars was manufactured to securely position larger parts. If you have any questions or require more information, please feel free to send us a message or call us.

Condition: excellent (used), Manufacturer: R+D Custom Automation Type of equipment: Semi-automatic assembly and ultrasonic welding machine Hjdpfeznvfisx Ah Ssnt Application: Production of medical bags and tubes Serial number: 19-11231 Supply voltage: 240 V AC Supply frequency: 60 Hz Number of phases: 1 Rated current (Full Load Amps): 20 A Maximum motor power (Max H.P.): N/A Compressed air requirement: 1 CFM at 90 psi SCCR (Short Circuit Current Rating): 300 kA RMS Enclosure type: NEMA 12 Drawing number: D-11030-2-02

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Hnjdpfx Aheu Ailgs Sjt Type SRC-B200-2R Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Inner height of bowl: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg good condition A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Year of construction: 2011, condition: used, Packaging Automation PA182 tray sealer 1.2802E+11 Stainless tray sealer, two station rotary table, up to 40 packs per min, mobile, current tooling 210mm x 165mm tray Hjdpfjdbqtqsx Ah Ssnt

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: DA710219, overall weight: 430 kg, load capacity: 10 kg, For sale is a linear Cartesian robot for injection molding machines, manufactured by Star Automation Europe in 2019. The sale includes only the robot itself (mechanical arm and remote control), without the surrounding enclosure, hoppers, or conveyor belts. It is ideal for pick-and-place operations, part extraction, and assisted placement. Technical Specifications: Brand: STAR AUTOMATION EUROPE S.p.A. Model: XW-1000VI 2V Hnsdpjzw Hy Asfx Ah Sst Product Code: DA710219 Year of Manufacture: 2019 Certification: Original CE marking Compatibility: Optimized for injection molding machines ranging from approximately 150 to 250 tons (originally used on an Arburg 520). Included in the offer: - Cartesian robot body with 3 linear axes. - Original operating panel (remote control) for cycle programming. - Original user manual and electrical diagrams for the robot. Machine Condition: Used, in excellent mechanical and electronic condition, carefully disassembled.

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 430 mm Bowl internal height: approx. 100 mm Sorting track width: approx. 12 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 min-1 Power connection: 230 volts, 50 Hz - Control unit REO Type Reovib RS6 439-459 for adjustable vibration speed Space required: Ø x H: 430 x 390 mm Weight: 52 kg Hedpszrzygjfx Ah Sent Good condition A spiral conveyor always consists of two essential components. 1) Sorting bowl, in which the parts are aligned. 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations, thereby setting the parts in motion.

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6,000 rpm Power supply: 230 Volt, 50 Hz - The feeder was used for feeding automotive blade fuses Installation space required Ø x H: 420 x 390 mm Weight: 52 kg Good condition Hodpfx Asy N Dvbeh Sjnt A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which causes the sorting bowl to vibrate by mechanical oscillations, setting the parts in motion.

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Hjdpfouzn Nnsx Ah Sjnt Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 Hnedpfxok Abwlj Ah Sot 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Year of construction: 1997, condition: ready for operation (used), Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation. Hnedpfjm H Uqkjx Ah Sot

Year of construction: 2021, condition: ready for operation (used), There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible. Hnjdpfx Ahsm Nckfo Sjt