Used Pelletizing Plant for sale (3,302)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Ljdpfjzw Apgsx Apdeag Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: A1106011/1300, working width: 1,300 mm, overall weight: 7,500 kg, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. working width: 1,300 mm Max. workpiece thickness: 120 mm MACHINE DETAILS Voltage: 400 V Current consumption: 36 A Fuse rating: 63 A Connected load: 17.0 kW Weight: 7,500 kg Laedpfx Apjzzbcgodsg Transport weight: 7,500 kg Number of transport packages: 8 units EQUIPMENT 4 spray guns Wagner pump system

Year of construction: 2018, operating hours: 7,000 h, condition: used, functionality: fully functional, We are offering this used Himel / Gama control cabinet for a pellet press and pellet system for straw / hay / alfalfa, manufactured in 2018. It has approximately 7,000 operating hours. The hourly output, depending on the biomass, is 700 - 1200 kg, according to the manufacturer. We also have a separate press with 90 kW available for €95,000; it has approximately 500 operating hours and was manufactured in 2025. Type: Control cabinet for pellet press Number: 20182138 Year of manufacture: 2018 Ledpozrvh Ejfx Apdsag Power supply: TNC-S 400V AC/N/PE Frequency: 50 Hz Power: 195 kW Max. current consumption: 375 A If you have any questions or need more information, please send us a message or call us.

Condition: like new (used), Year of construction: 2024, Pellet production plant – complete line – fully automated Salmatec press Rematec hammer mill Belt dryer VAI bagging machine Cooler Sifter Palletizer Less than 1000 operating hours – certified Lodpfszg Eudox Apdoag Option for on-site reinstallation Option for on-site operator training

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, control type: NC control, degree of automation: semi-automatic, actuation type: electric, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, Pellet press for rent – suitable for wood, plastics (PE, PET), and agricultural by-products. Available: 4 kW (50–100 kg/h) or 22 kW (200–350 kg/h). Comes with various dies for different materials. Ideal for trial runs, pilot projects, and temporary production. Flexible rental periods, delivery, and support available. 👉 Henkes Industries GmbH Laodpfx Apsxtwyrodog

Condition: new, Year of construction: 2025, type of input current: AC, power: 5.5 kW (7.48 HP), input voltage: 400 V, Pelleting plant for a wide variety of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, maize straw ....) Animal feed ..... This is a complete system (compact system), which is built on a base frame and consists of the following components: Storage container for raw material 1.5 m³, incl. agitator Inclined mixer for raw material incl. level sensors and fully automatic moisture metering Dosing screw for optimum material feed to the press (speed-controlled) Press 5.5 kW, with horizontal round die, discharge chute with dust separation, temperature monitoring Conveyor belt for pellet removal, discharge height approx. 2.0 m The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! Lsdpfsud Nx Hex Apdeag Price excl. VAT! The price includes operator and service training (in A-4352 Klam)! Attention, some of the pictures do not correspond to the actual system ( are example pictures ) !!!!! Attention!!! we are constantly looking for sales and service partners (worldwide) !!!!!

Year of construction: 2026, condition: new, Screening plant for loading wood pellets, semi-mobile Ljdpfx Apeiux Tfedeag New production Screening capacity: 10 - 50 t/h (depending on design) consisting of: - Trough belt conveyor type TFB - Screening machine type ASM - Troughed belt conveyor type MFB incl. magnetic separator - Veralde set // MODULFLEX loader - Pipe screw conveyor (option) - Dust extractor (option) Functional description and mode of operation: The pellets are fed into the trough belt conveyor (incl. bunker attachment) by means of a wheel loader. The pellets then reach the oscillating screen type ASM. The screening machine separates the pellets into two size classes (pellets and dust). The screened pellets are loaded into the silo vehicle by means of a trough conveyor belt and loading equipment. Thanks to the integrated level indicator in the loading set, the system switches off automatically when the silo vehicle is sufficiently full. The dust fractions are discharged by means of a screw conveyor. To minimise the dust load, it is possible to equip the screening plant with an additional dust extractor type NE. The capacity of the screening plant (depending on the design) is between 10 - 50 t/h (70 m³/h) for wood pellets. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. This is a complete compact system, built on a base frame, consisting of the following components: - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m - Drum screen for dedusting and cooling of pellets The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! Lasdpfxsxlif Ro Apdog The system is designed and prepared for operation with a second press! Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!

Year of construction: 2000, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 071, Stock no. 2806 1 used, partially overhauled, and functionally tested strand granulator Type SG-60 E Cutting rotor with single-sided bearing Rotor diameter 160 mm x width 70 mm Rotor with helical cut, 30 teeth, 2° Strand inlet width: 60 mm Up to 12 strands according to the manufacturer Cutting chamber with sound insulation 2.5 kW - AC drive, adjustable via frequency inverter Ljdpfx Aez A R Iljpdjag Ready for demonstration at our plant in Wuppertal We have other strand granulators ready for demonstration. Please inquire about our current machine stock list.

Condition: new, Year of construction: 2026, We offer: Pellet machines from the WALW-Solutions brand, characterized by unique quality, honest workmanship, and a fair price. Honest Workmanship: We produce our systems directly in Poland. Only components such as gearboxes and motors are purchased from reputable manufacturers. Everything else is designed and built in-house, which allows us to meet every requirement. Fair Price: We produce in Poland, and we stand by that. Other competitors, who advertise their products as "Made in Germany," only assemble them in Germany and typically source components from Lithuania. We enable you to benefit from our low production costs, resulting in our offer price being typically 40% lower than that of our competitors. These machines for pellet production are entirely new to the market in this price/performance segment and are unique in Europe! Machines from WALW-Solutions are available exclusively through us! From systems for processing in-house sawdust from firewood production or from your carpentry shop, to the professional production of pellets on an industrial scale from wood chips, straw, miscanthus, and more – and also for the production of hay or straw bales, we can provide you with the right solution! Our systems have a capacity of 150 kg/hour up to 5 tons/hour and include all the necessary components to implement a fully automated system. For all raw materials, we find the appropriate solution or methods to integrate automation into existing systems. Ljdpfxelt Ugte Apdoag All machines and controls are equipped with components from Siemens, ABB, Schneider Electric, etc. Please note that net purchase is possible if you have a valid VAT ID! We look forward to your inquiry! If you are interested, please contact me directly by mobile at:

Year of construction: 2025, condition: new, Screening plant for loading wood pellets, stationary New production Screening capacity: 10 - 50 t/h (depending on design) consisting of: - Modul-Silo type M-300 (45 °) - Oscillating screen type ASM - Conveyor belt type MFB incl. magnetic separator - Veralde set // MODULFLEX loader - Pipe screw conveyor (option) - Dust extractor (option) Functional description and mode of operation: The pellets are fed into the modular silo by means of a wheel loader. The pellets then pass through the ASM oscillating screen. The screen separates the pellets into two size classes (pellets and dust). The screened pellets are loaded into the silo vehicle by means of a conveyor belt and loading equipment. Thanks to the integrated level indicator in the loading set, the system switches off automatically when the silo vehicle is sufficiently full. The dust fractions are discharged by means of a screw conveyor. To minimise the dust load, it is possible to equip the screening plant with an additional dust extractor type NE. The capacity of the screening plant (depending on the design) is between 10 - 50 t/h (70 m³/h) for wood pellets. Lajdpfxjinkw Aj Apdog Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you. We look forward to your feedback!

Year of construction: 2026, condition: new, FABO Mobile Scalper screen is produced for aggregate producers who require higher productivity and versatility. The machine can be used for multiple purposes; it can be used as a heavy-duty incline 2 deck screen, capable of stockpiling, scalping before and after crushing units, or it can be used a standalone system as well. That is why FABO tracked mobile scalpers can separate the hardest materials. FABO Mobile Scalpers helps our customers to maximize productivity while on the other hand helps on reducing the production costs. - - - Technical Specifications of the Tracked Scalper Screen: - *Bunker capacity :7m³ - *Production capacity : 220 – 400 Tons per hour Lajdpfx Aszfp Daspdjg - *Vibrating Screen Size : 1530x4800 mm - *Total Power : 110 kvA - *Screen Media : Punch Plate, Grizzly, Bofors - *Weight : 31.000 kg - *The screen angle varies between 18-27°.

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 RWBT 2 - 30000 Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. Lajdpfx Apszzd Dmedsg AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Condition: used, Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, machine/vehicle number: HS6434, path measurement accuracy: 620 mm, type of input current: AC, total width: 620 mm, total length: 3,820 mm, total height: 700 mm, overall weight: 300 kg, input voltage: 230 V, The Cox & Plant HS6434 is a high-performance, industrial-grade electromagnetic vibratory conveyor designed specifically for the hygienic handling of bulk solids, particulates, and fragile products. Manufactured in 2015, this unit represents the pinnacle of Cox & Plant’s specialist engineering in efficient, low-maintenance food and chemical processing technology. Utilizing a precise 6mm stroke amplitude driven by heavy-duty electromagnetic coils, the system offers instantaneous start/stop control and eliminates the mechanical wear components (like belts, bearings, and eccentric drives) common in traditional conveyors. Laodpjzz Ax Aofx Apdjg

Condition: repair required (used), functionality: unexamined, Year of construction: 1990, overall weight: 92,000 kg, load capacity: 20,000 kg, working height: 8,500 mm, Equipment: documentation/manual, Two rail-mounted electric container gantry cranes are offered for sale from an industrial site in Riga, Latvia. The cranes were designed for loading, unloading, transferring and stacking ISO 1C and 1CC containers. Their 20,000 kg rated lifting capacity, 25 m span and powered travelling trolley make them suitable for container terminals, railway yards, ports, logistics hubs and industrial storage areas. The cranes were manufactured in 1990 by KRAN / Uzlovsky Machine-Building Plant in the Tula region. The factory type designation is 20-25-8.5-5. Two units are available. EQUIPMENT AND DOCUMENTATION Rail-mounted gantry structure with electrically driven crane travel mechanism. Powered travelling trolley and main hoisting mechanism. Operator cabin control. The factory passport specifies a rotating 20 t container spreader for ISO 1C and 1CC containers; Lajdpozmtcijfx Apdeg A technical passport for factory no. 029 is available in Latvian and Russian, including historical inspection and repair entries. Further technical information and detailed photographs can be provided on request.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 203-654, controller model: Siemens S7-200, number of chambers: 1, usable tank capacity: 4,000 l, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The collection basin was renewed in 2022! TECHNICAL DETAILS Number of chambers: 1 Chamber volume: 4,000 l Cleaning agent: Surfaclean 936 or Surfaclean 980 Concentration: 5% Ultrasonic power: 2 × 2,000 W Ultrasonic frequency: 25 kHz MACHINE DETAILS Control type: Siemens S7-200 Connected load: 75 kW Heating power: 57.5 kW Dimensions of the washing system: 1,900 × 2,800 × 1,700 / 3,300 mm with lifting device Dimensions of the collection basin: 3,600 × 3,300 × 400 mm Control voltage: 24 V DC EQUIPMENT Lifting device Lift truck with washing baskets Newly manufactured collection basin Ultrasonic cleaning Tools and fixtures Operating manual Wiring diagrams Maintenance history, partially available Note: The ultrasonic washing function was working during the last use. Ljdszx S E Hopfx Apdoag The lifting function for moving the container with the washing material did not function properly. The temperature control of the washing liquid did not function properly. The oil separation of the washing liquid did not function properly.

Year of construction: 2026, condition: new, functionality: fully functional, FTS 15-60 is a compact and heavy steel structured trucked plant with three-decks screen. Also integrated with tracked moving system and robust structure. Works via conveyor belt system. The fully electrically driven plant is designed in a variety for maximum capacities and suitable for feeding materials with a maximum edge length of 200 mm. All functions, as well as subsequent and previous crushing plants, conveyor belts, etc. are electrically lockable. • Production capacity: 500-600 TPH • Screen dimension: 1550x6100mm • Mobile three-decks screen • Diesel electric drive • Classifier screen plant up to 4 final fraction sizes Maximum feeding size 100 x 160 mm Laedpezwf Ewofx Apdog

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. Lodpfx Apjq Nyuvjdeag 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. Laedpfxeq Ngb Dj Apdeg 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Condition: excellent (used), 1 x Oddy Novatek 2 Roll Plant Ledjy Hk Daspfx Apdoag

Year of construction: 1988, condition: ready for operation (used), A regeneration plant Erema is available. Components: conveyor belt, extrusion unit, screen changer, strand pelletizer, control unit, and intermediate conveying system. An on-site inspection is possible. Lasdpfx Apow Dfgwsdeg

Condition: like new (used), Year of construction: 2024, functionality: fully functional, wall material: stainless steel, Equipment: cooling unit, PRODUCTION REACTORS, COLLECTION TANKS, CONTROL PANELS WITH DRIVES, PLATFORMS, AND EQUIPMENT—SUITABLE FOR SYNTHETIC THICKENER PRODUCTION (AND OTHER CHEMICALS SUCH AS POLYMERS, ETC.)—MADE FROM HIGH-GRADE STAINLESS STEEL, ARE FOR SALE AND IN OPERATIONAL CONDITION. CONSULTANCY SERVICES CAN ALSO BE PROVIDED FOR THICKENER PRODUCTION UPON REQUEST. Acrylic thickeners, binders, alkyd resins can be produced, and formulations can be supplied with the sale. The machines are available as a complete set or can be sold separately. Suitable for chemical production in all industrial sectors including textiles, food, cosmetics, construction, etc. 1. REACTOR - 17-ton capacity reactor - Barely used - 316 stainless steel (tank wall 10-12mm, domes 10-12mm thickness) - 37kW ATEX-rated motor with gearbox - Electrical control panel with Delta inverter - External coil for heating and cooling - Currently heated by thermal oil, cooled by chiller cold water - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 2. REACTOR - 22.5-ton capacity reactor - Made from 304 stainless steel / 8mm tank wall, 10mm dome thickness - Unused - 22kW motor and reducer - Electrical control panel with Delta inverter - External coil and jacket for heating and cooling - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 3. STORAGE/FEED TANK - 10-ton capacity 304 stainless steel storage/feed tank - Unused - 8mm dome, 6mm wall thickness - Full-length sight glass system to monitor product level inside - All flanges and fittings included, fully connected *Can be converted to a mixer/stirrer by adding a motor and shaft. 4. HOMOGENIZER/DISPERSING/MIXING TURRAX Lsdpfjy Aggpox Apdeag - IKA brand - ATEX certified - 17 L/hour, 30 kW/10 bar Note: These systems are designed for the production of thickeners used in printing and many other industries. All parts have been manufactured and supplied by experts in the field, meticulously engineered with no compromise on quality. Motor selection, sheet thickness, inverters, and other systems are of top quality and will operate problem-free for the buyer. For more detailed information, please contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. Laodpfxoq Nw Uqs Apdsg This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Lasdpfozcf Dlox Apdsg Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: used, Münch RMP 660 pellet press for the production of wood pellets and biomass pellets from sawdust, wood shavings and other organic waste materials. The machine is suitable for industrial pellet production, offering high pressing capacity and consistent pellet quality. Ideal for wood processors, sawmills and biomass plants. Technical data: - Screen: 6 mm Lodpfx Apjzryyredsag - Motor: 2 x 90 kW - Inner diameter of die: approx. 660 mm - Number of press rollers: 2 - Pressing capacity: up to approx. 3–5 t/h