Used Pellet for sale (275)

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 1,00,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Fgodpfxoi Akrks Ap Deh Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). Fsdpfxezw Apge Ap Dogh The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Key technical data (type 37-850) • Die diameter: 850 mm • Roller diameter / width: 350 mm / up to 130 mm Fodpfsz I Tktsx Ap Dogh • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Condition: used, Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, The last service performed by Asco was in December 2016 at 12,032 hours. After the service, the system only operated for an additional 603 hours because investment was made in a brand new production line. The machine has a total of 12,635 operating hours (12,032 hours since the last service + 603 additional hours). The machines come from a large industrial factory that changed its production setup and switched to a different equipment brand. This change is the reason these machines were taken out of production and are now available for sale. The machines are used, fully functional, and in good working condition. The main technical specifications, year of manufacture, and operating hours are listed in the advertisement. Fgsdpfx Asy R I Uqsp Doh Worldwide shipping is available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Year of construction: 2005, operating hours: 20,000 h, condition: used, functionality: fully functional, MEWA UG1008 MS industrial granulator – 160 kW For sale: an industrial MEWA UG1008 MS granulator designed for the secondary shredding and granulation of various pre-shredded industrial and secondary raw materials. Fgjdpfez Duuxsx Ap Djh This is a robust, German-made MEWA unit designed for continuous industrial operation. The machine is equipped with a powerful 160 kW ABB electric motor, a hydraulic material clamping mechanism, a perforated screen, and electrical control cabinets. The unit can be used in various waste and secondary raw material processing lines, depending on the installed screen and the specific material being processed. MEWA UG1008 type granulators are used, among other things, for the granulation of pre-shredded tires, RDF/SRF alternative fuels, and other materials. Key technical data: Manufacturer: MEWA Model: UG1008 MS Type: industrial granulator Main motor: ABB Motor power: 160 kW Power supply: 400 V / 50 Hz Rotor diameter: approx. 800 mm Cutting chamber dimensions: approx. 1000 × 800 mm Rotor blades: 25 pcs. Stator blades: 5 pcs. Hydraulic clamping Replaceable perforated screen Electrical control cabinets Total unit weight: approx. 18 t (depending on the specific configuration) These technical parameters correspond to publicly available MEWA UG1008/UG1008 MS specifications. Applications The granulator can be adapted for: pre-shredded tires; RDF/SRF alternative fuels; plastic waste; various industrial wastes; other secondary raw materials that require secondary shredding. The final fraction and output depend on the type of material, its fraction, moisture content, density, the installed screen, and the condition of the blades. Reference MEWA UG1008 technical descriptions indicate an output of up to 2.0–4.5 t/h for pre-shredded tires or alternative fuels; however, this is not a guaranteed performance for your specific machine – it must be evaluated based on the actual material and configuration. Configuration Based on the inspection, the configuration includes: MEWA granulator; 160 kW ABB electric motor; hydraulic system; perforated screen; electrical control cabinets; cables and other related equipment. The machine is sold in the configuration as shown in the photos.

Year of construction: 2018, operating hours: 7,000 h, condition: used, functionality: fully functional, We are offering this used Himel / Gama control cabinet for a pellet press and pellet system for straw / hay / alfalfa, manufactured in 2018. It has approximately 7,000 operating hours. The hourly output, depending on the biomass, is 700 - 1200 kg, according to the manufacturer. We also have a separate press with 90 kW available for €95,000; it has approximately 500 operating hours and was manufactured in 2025. Type: Control cabinet for pellet press Number: 20182138 Fgedpozrvh Esfx Ap Deh Year of manufacture: 2018 Power supply: TNC-S 400V AC/N/PE Frequency: 50 Hz Power: 195 kW Max. current consumption: 375 A If you have any questions or need more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2014, Pellet production line ZEPPI ! Capacity - 2t/h Pellet press - ZEPPI 132 Kw Year - 2014 Exellet condition ! Fgodpfx Apsz I S Svj Doh

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Fsdpfx Ajz Ixc Iep Degh

Condition: used, Year of construction: 2006, operating hours: 22,000 h, functionality: fully functional, EQUIPMENT FOR TRANSPORT AND MANIPULATION OF RAW MATERIALS The equipment consists of:  Mercedes Actros container truck  Two containers with a volume of 10 to 20 m3 for sawdust Fedpez I Tm Ujfx Ap Dogh  Liebherr bulk loader Equipment condition:  In good condition EQUIPMENT FOR THE PREPARATION OF RAW MATERIALS The equipment consists of:  Waste bin with movable floor - volume approx. 10 m3  Pneumatic transport systems with filter  Conveyor belts and augers  Sawdust dryer with biomass burner  Hammer mill for chopping wood chips with associated equipment  Control cabinets for each piece of equipment Capacity of the complete plant:  About 2 t/h of dried sawdust Equipment condition:  Completely overhauled BRIQUETTING PRESS WITH SAW AND PACKING UNIT Full capacity is 3,5T/h A complete briquetting line consisting of the following:  Briquetting press BP6000 CFN consisting of: o Silos for raw materials o Dosing screw o Oil and press head cooling system o Original press head and cooling line for briquettes with a diameter of 90 mm for hardwood o Manual and automatic control system o Current condition: the press has been 100% serviced and all vital parts of the press have been changed so that it is like new ones o Large quantity of spare parts in stock including spare axle and eccentric  Saw for cutting briquettes BRIDGE o Current condition: the equipment has been fully serviced  Automatic packaging machine for briquettes ROSMAN o Current condition: the equipment has been completely serviced and a new control cabinet has been made

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 10,000 kg, power: 264 kW (358.94 HP), input voltage: 400 V, 2 used Salmatec presses, type Maxima 840/125 LF Suitable for compressing sawdust, with forced feed. The presses are equipped with an automatic grease lubrication system for the rollers and main shaft bearings. In addition, there is a lifting beam on the press for changing rollers and dies. The motors are 132 kW and of the Hoyer brand, manufactured in 2016, IE3 efficiency class. The presses have always been maintained by Salmatec and have recently been fitted with refurbished rotors. Fjdpfx Apoz I Tzxe Dsgh Several rollers and dies are included with the presses. Interested or would you like more information? Please feel free to contact us for specifications, photos, and price.

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading. Fgsdez Ar D Ropfx Ap Dsh

Year of construction: 2026, condition: new, PLN-75 Mini Film Waste Pelletizing Line with Air Cooling The Mini Film Waste Pelletizing Line is designed for recycling low-bulk-density polymer waste at relatively low production capacities. It is a compact solution for processing film production waste and other lightweight plastic materials into reusable pellets. The system can process plastic film in either shredded or non-shredded form, depending on the type and condition of the material. 1. Output Range: 30~50Kg/hour Fgodpfsz Nlfmex Ap Djh 2. Standard Electricity:380V/3 Phases/50 Hz 3. Main Motor Power: 15 кW 4. Total Power: 29 кW 5. Screw Diameter. : 75 mm 6. Filter: Dual stations manual filter 7. Cooling Method: air cooled 8. Material feeder pusher: equiped 9. Application: LDPE, HDPE,LLDPE pelletizing, scraps or rolls

Year of construction: 1984, condition: refurbished (used), functionality: fully functional, drive type: V-snaren, Motor: 55 kW - 1500 RPM Tread die: 85 mm Die diameter: 362 mm Equipped with a cut-off knife on the door Weight: 1440 kg 1 year warranty Fedpfoz Arh Nox Ap Dogh

Condition: new, New, never used pellet making machine for sale! It can be ordered with a 6 mm or 8 mm sticker (1 piece optionally comes with the machine). Pellet production capacity up to 400-450 kg/hour depending on the raw material. Pellet diameter:3mm, 4mm, 5mm, 6 mm or 8 mm (depending on the chosen sticker). 3mm, 4mm, 5mm, 6mm sticker with roller as a set for the machine for 2000 euros. Sticker diameter: 300 mm. Adjustable pellet length: 10-30 mm. Engine power: 22 kW. Dimensions: 1400 mm x 600 mm x 1100 mm. Weight: 750 kg. Raw material moisture: 10-12-14%. The moisture content affects the quality of the pellets. Dph3O7 Raw material size: Saw dust: 1-3 mm, straw: 3-6 mm. Fgsdpsxmhx Esfx Ap Dsh The density of the granules is no more than 1250/m3. It is located locally in Budapest (EU), Hungary.

Year of construction: 2020, condition: used, functionality: limited functionality, We offer this technological line for pellet production from vegetable waste (sunflower husk) – BART-M SRL OGM 1.5, manufactured in 2020, in used condition. Manufacturer: BART-M SRL Model: OGM 1.5 Year of manufacture: 2020 Condition: used Category: 34 Productivity: 800 kg/hour Weight kg: 6800 Dimensions mm Length: 5385 Width: 4400 Height (without exhaust pipes): 6935 Traction: electric Energy performance Total installed power kw: 150 Type of current: Alternating Current frequency hz: 50 Network voltage V: 220/380 Agrotechnical performance: Fsdpfx Ajztaahjp Dsgh Admissible amount of non-granulated raw material: 2% max Admissible moisture content of cooled granules: 12% max Technical characteristics of the finished product: Caloric value of the granules Mj/Kg: 14-19 (vegetable waste) Kw/kg: 3.89-5.27 Diameter mm: 6-8 Length mm: 40 If you have any further questions or need more information, please do not hesitate to send us a message or call us.

Condition: used, Granulation and packaging line. Model: HM700E PRO 11KW Year of manufacture: 2022 It includes: Hammer mill - shredder Chip mixer Chip feeder Granulator Vibrating table Product feed belt (conveyor belt) Pellet hopper with packaging equipment Bag sealer and chip moisture meter Hammer mill with cyclone Motor: 11 kW / 400 V Productivity: 300 - 700 kg / h Weight: 360 kg Soft start installed Cutting system 16 hammers Chip mixer: Volume: 1.0 m³ Chip feeder: Motor: 3.3 kW / 380V Feeds up to 800kg / h Granulator: Motor: 22 kW / 380V/50hz; Productivity: 300 - 700 kg/h Weight: 590kg Soft start installed Vibrating table: Weight 90kg Fedpfsxcy D Esx Ap Djgh Product feed belt (conveyor belt): Dimensions: 5m × 0.4m. Automated packaging equipment: Dimensions: 1, 90x2, 50x2, 30 Volume: 1.5m³ Packing in bags: 1 - 50kg Equipped with two types of scales Bag sealer 220V Moisture meter

Condition: used, Year of construction: 1985, functionality: fully functional, For sale: granulator from the renowned manufacturer Buhler. Fgjdpfx Aow Uh Nzop Djh Granulator model: DPAA-660 Motor power: 160 kW – option to install a more powerful motor – 200 kW. Die diameter: 660 mm, Die working width: 160 mm, Granulator output on straw / sawdust: 2 – 2.5 t/h The granulator is currently dismantled. For a committed buyer, we will assemble it using new wear parts. Contact for more photos and details. Machine available for inspection in Sępólnie Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Fedpjyrhd Tjfx Ap Dsgh Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Fsdpfstw Szaox Ap Djgh Capacity 100 kg / h Used, no warranty This machine is located in Tata, Hungary. What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Benefits of pellets? Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Condition: like new (used), Year of construction: 2024, Pellet production plant – complete line – fully automated Fjdpfx Ajzg Eudep Dogh Salmatec press Rematec hammer mill Belt dryer VAI bagging machine Cooler Sifter Palletizer Less than 1000 operating hours – certified Option for on-site reinstallation Option for on-site operator training

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 26/2632, power: 180 kW (244.73 HP), input voltage: 380 V, warranty duration: 12 months, Equipment: documentation/manual, 1. Pelletizing press, brand: Paladin 1600-210 Fgsdpfx Aeq U R N Top Deh Internal diameter of the die: 850 mm Die surface: 210 mm The press is equipped with 2 motors, each with 90 kW and a speed of 1500 rpm. The press door is made of stainless steel and has an overload valve. 2. Roll press with 2 rolls on the press, refurbished with a drilled or ribbed design. The press is complete with a die lifting device and tools. New rear plate for the 2 rolls. The press has been completely refurbished and fitted with new bearings and wear parts, such as front and rear sliders, die adjustment ring, etc. Also includes new V-belts and toothed belt. All safety features will be taken into account, and appropriate switches will be installed. Friction protection, door switch, and inspection hatches will be mounted. Refurbished pump unit for friction and V-belt tension. Note: Conditioner on the press is an optional extra.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C Fgsdjzvq Rcspfx Ap Doh • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer this pellet production line from STOZA s.r.o., in very good condition, year of manufacture 2014. Manufacturer: STOZA s.r.o. Year of manufacture: 2014 Condition: very good Category ID: 659 Type: Pellet production line Fodsy Ah Nfopfx Ap Degh If you have any questions or need further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2018, Equipment: documentation/manual, MAAG M-USG 600 H – PET Pelletizing Line, 6,500 kg/h – 2018 MAAG Automatik M-USG 600 H pelletizing line, manufactured in 2018, designed as an underwater strand pelletizing system for the continuous production of polymer pellets and originally used for PET. The line integrates automatic strand feeding and cutting, water cooling, hydraulic conveying, centrifugal drying and pellet classification, with an approximate nominal capacity of 5,300 kg/h and a maximum design capacity of up to 6,500 kg/h. Equipped with an 80-strand die head, automatic feeding system and strand pelletizer/cutter, hydraulic conveying system, MAAG CENTRO 1600 centrifugal dryer, exhaust fan, VIBRA Schultheis SRK 15/7.5-I-V-S vibrating screen, and control system with Siemens SIMATIC HMI. Predominantly stainless-steel construction in the areas in contact with the product and process water. Suitable for PET pellet production and potentially for recycled PET (rPET) pelletizing applications, subject to process configuration and material characteristics. Fodezvc R Ujpfx Ap Degh Two identical lines available, fitted with MAAG CENTRO 1600 dryers, machine numbers CE-0468 and CE-0469.

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 305.537.1992, warranty duration: 12 months, Le Meccanica CLM630ST 630/150 die and rolls Force Feeder with a 0.9KW motor Fgjdpfxjv Sq Rlj Ap Deh Currently undergoing full refurbishment - Seals &bearings included Colour - customers option Customer to arrange collection and freight