Used Perforate for sale (856)

Condition: new, table height: 800messurements (LxWxH): 1450 x 950 x 800table width: 950table length: 1450weight approx.: 288 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link: Iijdpfsfkzcvsx Ac Aek

Year of construction: 2015, condition: used, functionality: not functional, machine/vehicle number: S35 04, Technical Characteristics: Iiodpfxexx Smkj Ac Ask Dimensions & Construction - Overall dimensions (W × D × H): 864 × 709 × 1927 mm - Working area: 600 × 600 × 500 mm - Sink diameter: 300 mm - Weight: Approx. 175 kg Materials: - Working area: Polished stainless steel 304L - Enclosure: Acrylic Power & Control - Power supply: 230 V, 50 Hz, single phase - Power consumption: 1.3 kW (without ultrasonics) - Control system: Proface PLC with color touchscreen HMI Fluid & Rinsing System - Solvent reservoir: 13 L max - Rinsing flow rate: Up to 5 L/min (adjustable) - Rinsing pressure: Max. 2.8 bar (≈ 41 psi) - Solvent vapor extraction: Integrated exhaust fan Cleanliness & Filtration - HEPA filter: 0.3 μm for laminar airflow (ISO Class 5 environment) - Solvent filter: 0.2 μm absolute - Membrane holder options: - Single-stage - Multi-stage (3 membranes) Ergonomics & Safety - Noise level: < 70 dB - Access: Full work area access for service - Compliance: CE certified (Machinery Directive 2006/42/EC, EMC 2004/108/EC) Optional Features - Ultrasonic agitation: 100 W transducer (optional) - Accessories: - Perforated bowl for ultrasonic analysis - PEHD mounting plate for nozzle spraying - Splashback guard - Cascade membrane holder (5–100 μm ratings) This unit is ideal for validating cleanliness levels in accordance with ISO 18413, ISO 16232, and VDA 19 standards. Machine Status: - NOT WORKING – vacuum pump malfunction

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2025, NEW - NEW Unox Bakerlux 4 Shop.Pro LED Convection Oven NEW - NEW Convection oven for 4 trays 600 x 400 mm Stainless steel construction with front glass panel Manual drop-down door, programmable controls Adjustable temperature range from 50 - 260°C Connection: 400V, 16A CEE plug Dimensions: 800 x 811/860 x 500 mm (W x D x H) Oven NEW with warranty + spare parts service Quality from a specialized company! Benefit from over 35 years of experience! Options: Baking trays 600x400 ALU perforated trays 600x400 Water filter Pure Maintenance contract Delivery service Iisdpjxci U Tefx Ac Ask E-Box Service package Instruction & commissioning Visit our large oven showroom!

Condition: used, Power: 1 kW (1 HP) Current frequency: 50 Hz Voltage: 380 A full coating unit, with its equipment, designed for coating products by means of a continuous or discontinuous spraying process. Additional documents : Plan implantation équipements + système cip . pdf 1 Glatt GC 750/500 coating unit – drive motor : 1,1 kW – 380 V – 50 hz – IP 54 – Ex - ventilateur d'entrée d'air : 1000 m3/h - 6860 trs/min - 2’003 Pa - Max 80°C - 1,1 kW - IP 54 – air inlet fan : 1000 m3/h – 6860 rpm – 2’003 Pa – Max 80°C – 1,1 kW – IP 54 – air outlet fan: 1200 m3/h – 2900 rpm – 1’030 Pa – Max 80°C – 7,5 kW – IP 55 – Drum speed: 2 – 18 rpm – Sold with two perforated drums ⌀500mm and ⌀750 mm – Adaptable 2-head spray arm + Peristaltic pump– Spare parts, seals, … - Capacity : 20L : 7 to 15 kg 60L : 30 to 45 kg 1 Dust collector Herding FilterTechnik Extraction air volume: 1200 m3 / h Extraction air volume: 1200 m3 / h 1 Wanson CD-36 steam boiler - Power: 36 kW – Steam output: 48 kg/h – Operating pressure: 5 bar – Temperature : 159°C Isdpsx At Hajfx Ac Aeik – Water volume: 10 L 1 Cleaning system (CIP) Used for easy cleaning and maintenance of the machine.

Condition: good (used), functionality: fully functional, machine/vehicle number: WSM00000003420327, empty load weight: 7,460 kg, maximum load weight: 28,540 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2023, next inspection (TÜV): 08/2025, loading space length: 15,000 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 102 m³, suspension: air, tire size: 385/65 R 22.5, tire condition: 90 %, color: black, trailer brake: trailer braked, Year of construction: 2023, Equipment: ABS, our vehicle number: # 30065 Schmitz Cargobull SCS 24/L - 15.00 EB Standard curtainsider Steering axle A3 Manual and electro-pneumatic steering axle lock Sliding curtain Power curtain on both sides Cut-resistant tarpaulin Sliding roof RSAB (RoofSafetyAirbag) Portal doors Iiodov Efl Rjpfx Ac Ajk Double internal pivot rods Perforated outer frame 14 pairs of lashing eyes 4 tons 5 pairs of lashing eyes 2 tons 4 pairs of ferry lashings RoRo transport Forklift truck accessible 7,100 kg Wear plate loading floor rear Schmitz axles Disc brakes Tires 385/65 R 22.5 approx. 90% Continental Air suspension Raise/lower ABS EBS Side Underrun protection Jost seat supports Jost rear supports Schmitz Trailer Connect Tool box LED lighting Document box LaSi load securing certificate EN 12642 XL Drinks certificate Rental purchase or financing also possible on request!

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Storage location: Supplier Iodpsvvi Anofx Ac Asik

Condition: new, table height: 800 mmmessurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 481 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link: Ijdpfx Aefk Aimoc Aeik

Condition: used, Creasing, Perforating, and Folding Machine CRF-362, used The CRF-362 from Horizon is the perfect solution for print shops that need a reliable and powerful machine for processing digital and offset prints. With its ability to perform various tasks like creasing, perforating, and folding in one pass, it optimizes the production process and saves valuable time. Key Features - Combination Function: The machine combines creasing, perforating, and folding, which simplifies the workflow and increases efficiency - Material Flexibility: It can handle material thicknesses from 100 to 350 g/m² for creasing, perforating, and folding, and up to 450 g/m² for creasing only - Precise Creasing Technology: The CRF-362 offers creasing thicknesses of 0.8 mm for lighter materials and 1.3 mm for heavier materials, with optional thicknesses of 0.5 mm and 2.0 mm - Variable Crease Distances: Crease distances are adjustable from 0.1 mm in 0.1 mm increments, allowing for high precision - High Speed: The machine can process up to 4,900 sheets per hour, ensuring high productivity Specifications - Maximum Format Size: 364 x 865 mm - Minimum Format Size: 105 x 180 mm Iodeu Tdryepfx Ac Aeik - Loading Capacity: 150 mm - Weight: 263 kg - Power Supply: 230 V, 4.2 A, 0.8 kW

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2025, NEW - NEW Unox Stefania Rack Oven NEW - NEW Hot Air Oven Stefania Convection oven for 3 trays 460 x 330 mm Stainless steel design with front glass panel Manual controls Adjustable temperature range from 80 to 260°C Connection: 220-240V, Schuko plug Dimensions: 600 x 655 x 429 mm (W x D x H) Oven NEW With warranty & spare parts service Iiodpfx Aexckadjc Ajk Quality from a specialist company! Benefit from over 35 years of experience! Options: Baking trays ALU perforated trays Lievox proofing cabinet Base frame Maintenance contract E-Box Delivery service Commissioning & user training Visit our large oven showroom!

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. Ijdpfx Ajwv Tqbjc Aoik - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: good (used), functionality: fully functional, machine/vehicle number: WSM00000003420330, empty load weight: 7,460 kg, maximum load weight: 28,540 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2023, loading space length: 15,000 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 102 m³, suspension: air, tire size: 385/65 R 22.5, tire condition: 90 %, color: black, trailer brake: trailer braked, Year of construction: 2023, Equipment: ABS, our vehicle number: # 30064 Schmitz Cargobull SCS 24/L - 15.00 EB Standard curtainsider Steering axle A3 Manual and electro-pneumatic steering axle lock Sliding curtain Power curtain on both sides Cut-resistant tarpaulin Sliding roof RSAB (RoofSafetyAirbag) Portal doors Double internal pivot rods Perforated outer frame 14 pairs of lashing eyes 4 tons 5 pairs of lashing eyes 2 tons 4 pairs of ferry lashings RoRo transport Forklift truck accessible 7,100 kg Wear plate loading floor rear Schmitz axles Disc brakes Tires 385/65 R 22.5 approx. 90% Continental Air suspension Raising/lowering ABS EBS Side Underrun protection Jost seat supports Jost rear supports Schmitz Trailer Connect Tool box LED lighting Document box LaSi load securing certificate EN 12642 XL Drinks certificate Rental purchase or financing also possible on request! Iedpfjv Efktex Ac Aeik

Condition: new, table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 375 Iisdpfx Ajfk Ai Esc Ajk Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link:

Condition: used, Year of construction: 2011, DIRECT FROM PRINTING SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from your side. Iodpfxou Sr Szs Ac Ajik offer consists of: - high performance-finisher DocuCutter DC-645 Duplo DocuCutter DC-645 high performance-finisher for digital color printing: - feeder: air-suction feeder with lining up - operation: by LCD-display - control: barcode control - PC included - saveable jobs: 80 memories for repeat orders - error avoidance: ultrasonic-doublefeed control eject gate testprogram print mark reader - integrated knives: 6 lengthwise knives + 1 cross knife - size: max. 650x370mm min. 210x210mm - paper weight: 110-350g/qm - loading height: 100mm - creasing each sheet: max. 10 - production speed: max. 1500 sheets/h (A4) max. 720 sheets/h (A3) - power: 230V / 50Hz - 0,3kW - dimensions: 2.240x750x1.115mm - weight: 360kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: good (used), functionality: fully functional, machine/vehicle number: WSM00000003420326, empty load weight: 7,460 kg, maximum load weight: 28,540 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2023, next inspection (TÜV): 08/2025, loading space length: 15,000 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 102 m³, suspension: air, tire size: 385/65 R 22.5, tire condition: 90 %, color: black, trailer brake: trailer braked, Year of construction: 2023, Equipment: ABS, our vehicle number: # 30063 Schmitz Cargobull SCS 24/L - 15.00 EB Standard curtainsider Steering axle A3 Manual and electro-pneumatic steering axle lock Sliding curtain Power curtain on both sides Cut-resistant tarpaulin Sliding roof RSAB (RoofSafetyAirbag) Portal doors Double internal pivot rods Perforated outer frame 14 pairs of lashing eyes 4 tons 5 pairs of lashing eyes 2 tons 4 pairs of ferry lashings RoRo transport Forklift truck accessible 7,100 kg Wear plate loading floor rear Schmitz axles Disc brakes Tires 385/65 R 22.5 approx. 90% Continental Air suspension Raising/lowering ABS EBS Side Underrun protection Iiodpfx Acov Efccs Aok Jost seat supports Jost rear supports Schmitz Trailer Connect Tool box LED lighting Document box LaSi load securing certificate EN 12642 XL Drinks certificate Rental purchase or financing also possible on request!

Condition: new, table height: 800messurements (LxWxH): 1450 x 950 x 800table width: 950table length: 1450weight approx.: 315 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Isdpfx Ajfk Ai Hec Aoik For more information, follow the link:

Condition: used, Year of construction: 2018, Horizon SmartSlitter, used The Horizon SmartSlitter is an innovative all-in-one sheet processing system designed for efficient and versatile finishing of digitally printed materials. This device is in showroom condition and comes in an extended configuration. Key Features: - Performs multiple operations in a single pass: cutting, gutter cutting, edge trimming, cross-cutting, perforating, and creasing - Gutter Cutting: Machine is capable of making precise intermediate cuts, making it particularly valuable for producing high-quality, borderless printed materials - Color touchscreen for easy operation and intuitive job setup - Print mark registration to adjust for digital print image shift Special Configuration: - SMSL-CV Smart Conveyor for efficient product handling - SMSL-CR8 Feed Direction Rotary Creasing Unit for precise creasing - SmartSlitter ST Sheet Stacker as an additional option, specifically for smaller card formats Technical Specifications: - Sheet size: 210 x 210 mm to 364 x 670 mm - Paper weight: 81.4 to 350 gsm (normal paper), 105 to 350 gsm (coated paper) - Feeder stack height: 150 mm - Production speed: Up to 55 sheets per minute Isdpfxsxbdkmo Ac Asik - Number of crease lines: Up to 20 All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: new, table height: 800 mmmessurements (LxWxH): 2980 x 1480 x 800table width: 1480table length: 2980weight approx.: 630 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link: Iiedpfx Aefk Ailsc Ajk

Condition: used, Year of construction: 2013, Creasing, Perforating, and Folding Machine CRF-362, used The CRF-362 from Horizon is the perfect solution for print shops that need a reliable and powerful machine for processing digital and offset prints. With its ability to perform various tasks like creasing, perforating, and folding in one pass, it optimizes the production process and saves valuable time. Iijdpfx Acjxw T H Aj Aok Key Features - Combination Function: The machine combines creasing, perforating, and folding, which simplifies the workflow and increases efficiency - Material Flexibility: It can handle material thicknesses from 100 to 350 g/m² for creasing, perforating, and folding, and up to 450 g/m² for creasing only - Precise Creasing Technology: The CRF-362 offers creasing thicknesses of 0.8 mm for lighter materials and 1.3 mm for heavier materials, with optional thicknesses of 0.5 mm and 2.0 mm - Variable Crease Distances: Crease distances are adjustable from 0.1 mm in 0.1 mm increments, allowing for high precision - High Speed: The machine can process up to 4,900 sheets per hour, ensuring high productivity Specifications - Maximum Format Size: 364 x 865 mm - Minimum Format Size: 105 x 180 mm - Loading Capacity: 150 mm - Weight: 263 kg - Power Supply: 230 V, 4.2 A, 0.8 kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: new, table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 285 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link: Ijdsfk Aiwepfx Ac Aeik

Condition: used, Year of construction: 2014, Creasing, Perforating, and Folding Machine CRF-362, used The CRF-362 from Horizon is the perfect solution for print shops that need a reliable and powerful machine for processing digital and offset prints. With its ability to perform various tasks like creasing, perforating, and folding in one pass, it optimizes the production process and saves valuable time. Key Features - Combination Function: The machine combines creasing, perforating, and folding, which simplifies the workflow and increases efficiency - Material Flexibility: It can handle material thicknesses from 100 to 350 g/m² for creasing, perforating, and folding, and up to 450 g/m² for creasing only - Precise Creasing Technology: The CRF-362 offers creasing thicknesses of 0.8 mm for lighter materials and 1.3 mm for heavier materials, with optional thicknesses of 0.5 mm and 2.0 mm - Variable Crease Distances: Crease distances are adjustable from 0.1 mm in 0.1 mm increments, allowing for high precision - High Speed: The machine can process up to 4,900 sheets per hour, ensuring high productivity Iodpfsxbdn Eex Ac Asik Specifications - Maximum Format Size: 364 x 865 mm - Minimum Format Size: 105 x 180 mm - Loading Capacity: 150 mm - Weight: 263 kg - Power Supply: 230 V, 4.2 A, 0.8 kW

Condition: new, table height: 800 mmmessurements (LxWxH): 1480 x 1480 x 800table width: 1480table length: 1480weight approx.: 332 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link: Iedpfx Aogrz Tpoc Ajik

Condition: used, Year of construction: 2020, CYKLOS TriFold 360 Folding Machine?for connection to creasing machines (e.g. AirSpeed 450 or others) The CYKLOS TriFold 360 folding machine can be linked to the automatic creasing and perforating machine CYKLOS GPM 450 Speed or CYKLOS AirSpeed 450 (or other comparable creasing machines) to operate as a fully automatic creasing and folding system. Folding is achieved through the combination of manually adjustable fold plates and large-diameter rubber rollers – a simple and cost-effective yet revolutionary solution. All parameters can be adjusted according to the specific application and the speed of the creasing machine.? Special Features - easy connection to CYKLOS creasing and perforating machines AirSpeed 450 or GPM 450 Speed possible? - connection to a wide range of creasing machines from various manufacturers possible? - fold plate adjustment is manual? - standard fold types marked on fold plates: single fold, letter fold, zigzag fold, gate fold, parallel fold? Technical Details - paper weight: 100 – 350 g/m²? - paper size: max. 620 x 360 mm? - folding speed: up to 6,000 sheets/hour (depending on the speed of the creasing and perforating machine)? - easy operation and adjustment of feed, folding and delivery speed as well as suction air?transport table: L620 x W360 mm? - 2 interchangeable lower fold plates for different paper weights? - mobile stand with castors for easy handling - connection: 230 V / 50 Hz? - dimensions: L 1635 x W 565 x H 1310 mm? - weight (net): 113 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Iedjxr Ah Sopfx Ac Ajik Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: new, table height: 800 mmmessurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 530 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Ijdpjfk Aiqofx Ac Ajik For more information, follow the link:

Condition: new, table height: 800messurements (LxWxH): 1400 x 900 x 800table width: 900table length: 1400weight approx.: 235 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Iodpjfk Aitjfx Ac Aeik For more information, follow the link:

Condition: new, table height: 800messurements (LxWxH): 1480 x 1480 x 800table width: 1480table length: 1480weight approx.: 469 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Iiodsgrz Twspfx Ac Ajk For more information, follow the link: