Used Picture Frame for sale (11,671)

Condition: used, Year of construction: 1993, Technical details: lifting capacity in kg: 4000 kg lift: Freihub nein mm fork length: 1600 mm Lifting height: ca. 3400 mm weight approx.: 4000 kg dimensions L x W x H: mit Gablezinken: 4,5x1,2x2,3 m dimensions L x W x H: ohne Gabelzinken:2,8x1,2x2,3 m Rcodpfx Aiou Nv Uzorsh - lift frame= Duplex model - fork carrier width 1030mm - fork arms W: 1400mm x diameter: 50mm x L: 1600mm - including charger - mileage 09/2023 see picture - tyres front/back solid rubber - axial distance 1800mm *

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climate test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The good air circulation, with a correspondingly high volume of recirculated air, guarantees good transfer to the test specimen. The air handling unit is located at the rear of the interior. The units are located behind the device in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan.   Technical Performance Data:   Temperature Tests: Temperature range -60 °C to +100 °C Temperature deviation ±0.5 to 1 K over time Temperature change rate, linear with test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climate Tests:   Temperature range +10 °C to +90 °C Humidity range 10 % to 95 % relative humidity in the dew point range +5°C to +89 °C Temperature deviation ± 0.5 K over time Humidity deviation ±1 - ±3 % r.h. over time Rcodpfx Aezizmbsirjh   The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm Width: 1600 mm Depth: 1550 mm External dimensions: Height: 2800 mm Width: 2250 mm Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class IP 54   Technical Design:   Refrigeration unit water-cooled, low-noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by arrangement (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 97600 € 1844.64 € 160 to 6 mm 750 mm 1100 mm 230 mm 1 - 172 mm 45 1/min 6 100 mm 80 mm 375 mm 540 mm 11 kW 1890 mm 1950 mm 3650 mm 15500 kg Welded steel frame construction 8-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Hydraulic overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Symbolic photos, picture incl. optional available bolster plate OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device o.r. Rjdpfxewiqu Re Airjch etc.

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Rcjdpoz Snrnefx Airsh Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,200 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,200 mm, low bed approx.: 6,000 mm long, loading height incl. approx. 890 mm, 22 x lashing eyes each 10 t, 10 x stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the side, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour markings according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, Price: 500 ¤, , excavator trough, Price: 1,000 ¤ net, , , --  Misprints, errors and changes excepted, sample pictures --, More details at: !, More details: ! Rede Adpnajpfx Airoch

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading bed length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loaded platform height approx. 890 mm, 24 tie-down rings each 10 t, 12 stake pockets in the outer frame, access ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, access ramps laterally adjustable, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking according to regulations, revolving beacon, vehicle hot-dip galvanized, incl. axle load indicators. Surcharge for: warning signs with lighting and revolving beacon, widening to 3 m with wood inserts, price: 500 €; digger arm recess, price: 1,000 € net. -- Printing errors, mistakes and changes reserved, sample pictures -- More data at: !, More details at: ! Rjdpfx Aio Aduzrsrsch

Condition: new, Year of construction: 2026, neu 2026 070223 prompt, Zwischenverkauf v Türkei 25700 € 490.87 € 1 15 to 1.4 mm 320 mm 490 mm 130 mm 1 - 40 mm 200 1/min 4 40 mm 30 mm 210 mm 215 mm 1.5 kW 1160 mm 1180 mm 1730 mm 922 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release Rcsdpfx Aewirldeirsh * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Symbolic photos, picture incl. optional available bolster plate

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 14 x stake pockets in the outer frame, drive-on ramps (approx. 3.000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1.100 ¤, hydraulic 1-piece ramps 500 ¤, also with 9 m loading area length + widening in stock , , , , -- Subject to printing errors, mistakes and changes, sample pictures --, More data under: !, More Details: ! Redpfxo Afc Hls Airsch

Condition: used, Himmel HF120 mitre jointing machine for the precise and secure gluing of mitre joints in wooden frames, glazing bars and mouldings using white glue. The machine enables a fast setting time thanks to high-frequency technology, pneumatic clamping mechanisms and precise alignment of the workpieces. Ideal for furniture and picture frame manufacturing. Machine not in working order. Technical data: - Cycle time: approx. 4 seconds - Strip width: max. 100 mm - Strip height: max. 100 mm - Operation: foot switch - Possible angles: 90°, 120°, 135° Rcedpfx Aisztv D Asrsh

Condition: used, Zwick Type: BT1-FR050TH.A1K 50 kN Material testing machine Zwick/Roell BT1-FR050TH.A1K material testing machine – Precise strain gauge tests Note: No PC included!! Highlights: Testing force: 50 kN (tensile / compressive) High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-conductor) Measuring range: 0.2 – 165 % nominal value, measurement value acquisition up to 500 Hz Maximum resolution: up to 297,000 points (at 50 Hz) Positioning repeatability: ±10 µm Crosshead speed: 0.0005 – 600 mm/min Robust design, compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth Low noise: 59 dB(A), ambient temperature +10 to +35 °C, humidity 20–90 % Special features: Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: Testing force (tensile/compressive): 50 kN Load frame height: 1,714 mm Overall height: 1,814 – 2,688 mm Load frame width: 760 mm Overall width: 936 mm Load frame depth: 477 mm Overall depth: 722 mm Weight: With electronics unit: 230 kg With typical attachments: approx. 300 kg Condition: used Scope of delivery: (See picture) Rcsdpfxezii Ugs Airoh ZwickRoell BT1-FR050TH.A1K testing machine Operating manual (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, mileage: 10 km, power: 152 kW (206.66 HP), fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, loading space volume: 40 m³, loading space length: 6,100 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, tail-lift, Vehicle: * IVECO Daily 70C21HA8, 4x2 * Wheelbase: 5,100 mm * Engine: 207 EVI * 8-speed Hi-Matic automatic transmission * Permissible total weight: 7.0 - 7.2 t * Twin tires at the rear * Cab chassis Body: * Internal body length: 6,100 mm * Internal body width: 2,470 mm * Internal body height: 2,700 mm * Aluminum body supports at the front and rear, bolted * Ramp height * Tarpaulin in desired color with buckle closure * Non-slip, screen-printed floor, 18 mm thick * Front wall: 400 mm aluminum + 1,250 mm plywood * 12 recessed lashing eyes in the outer frame * Sliding roof * Aluminum subframe, 200 mm * Rear doors with 4-point locking * Roof cut-out Cab and Comfort: * Sleeper cab LAMAX with curtains (white) * Auxiliary heater * Automatic climate control * Adaptive cruise control (ACC) * MY IVECO navigation and infotainment system with 10'' display * USB ports A+C for driver and passenger * Comfort passenger seat with lumbar support and armrest * Storage compartment above the windshield * Leather steering wheel * Full-LED headlights * Front fog lights * Automatic high beam function * CB radio Chassis: * Frame extension * Air suspension * Reinforced chassis * Multi-leaf rear springs * AGM battery 105 Ah * Additional battery * Fuel tank 300 liters * Alternator 12V / 250A * Trailer coupling preparation 3.3 t Safety: * Blind spot assist * Rearview camera (prepared) * Reversing lights Rcodpfj Agd N Sox Airjh * Homologation * Exterior equipment in accordance with current road traffic regulations Loading and Work Equipment: * Toolbox * Pallet truck box * Water tank * Work lighting in the cargo area * BÄR FALT loading platform 1,500 kg, mounted flush under the body (greater ground clearance than a Dhollandia slider), including all necessary inspections and approvals for road traffic Exterior: * Roof spoiler 34 cm * Side wind deflectors * Exterior mirrors for body width 2.55 m * Plastic fenders with mud flaps * Anodized underrun protection * Vehicle color: White (IVECO IC 194) ATTENTION!!! EXAMPLE PICTURES Our special service for you: * Maintained according to service schedule at authorized dealers and specialist workshops * Winter tires available for an extra charge * Extended warranty insurance possible up to 36 months for an extra charge * We will gladly and fairly take your used vehicle in trade! * Financing available from 6.99% with or without a down payment, up to 96 months, creditworthiness required * TÜV / DEKRA main inspection and emissions test * EU net sale possible - intra-community delivery with a valid VAT ID number * Sale to non-EU countries (worldwide) possible including export registration, supplier declaration * We deliver your vehicle throughout Germany for an extra charge! * Registration service for customs and short-term license plates including insurance and registration fees The information provided on the Internet is a non-binding description. Errors and omissions excepted. The information provided does not constitute a guaranteed characteristic in the sense of BGB § 434 Para. 1 Sentence 3.

Condition: excellent (used), Blum EASYstick Drilling Machine including complete base frame – for professional furniture manufacturing For sale is a professional Blum EASYstick drilling machine, including the pictured, robust base frame with work surface, storage space, and accessories. Rcsdpfx Aisz Abu Esrjh Features & Scope of Delivery * Blum EASYstick drilling machine * Control monitor / control panel * Pneumatic components * Dust extraction connection * Large work or support surface * Integrated work/guide system * Robust base frame, complete * Several drawers and generous storage space * Mobile version * Foot switch * Sold as shown in the pictures, including matching accessories. The machine comes from a professional workshop environment and is in top condition. Its precise technical condition can be verified during an inspection. Inspection and test run possible by prior arrangement.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rjdps Afxrqjfx Airoch X-axis travel: 3,000 mm Y-axis travel: 420 mm Z-axis travel: 480 mm Table length: approx. 3,000 mm Table width: approx. 500 mm Spindle speed: up to 6,000 rpm Tool holder: SK 40 Tool positions: 22 MACHINE DETAILS Control system: Heidenhain TNC 407 EQUIPMENT 22-position tool changer Coolant system Heavy-duty frame construction Additional angular/universal milling head 4/5-axis machining possible

Condition: used, Year of construction: 1999, Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising) Incline: 191 mm / 90° = 764 mm / 360° Support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 1999 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. Rcjdpek Abtpjfx Airsh We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 766 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 700 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (V m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. Rcsdjk Aa T Hepfx Airoh We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 belt: double layer, green, smooth Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Rjdpek Aa T Rsfx Airech With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Rcodpjk Abazsfx Airsh Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1650 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optional Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2012, Transnorm belt curve conveyor right 90°-885-700-IR400 RA1830 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Conveying length middle radius (NL): 1178 mm Frame width (NB): 885 mm belt width (GuB): 700 mm height (BH): 170 mm height including motor (MH): 370 mm Inner radius (IR): 400 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,217m/s Rodpfxjqy Sgcs Airech Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.25 / S1 Belt:(wear see pictures) Year of construction: 2012 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 4820 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1000 mm Conveying angle: 180° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Special feature / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Rjdpfx Aiok Abcrorsch

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Riser with Arch and Straight GF 7000-650-500 RA1368 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7.000 mm (riser 4080mm + bow 500mm + upper straight 2420mm) Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Deflection roller: Ø = 34 mm Belt type: HSL 8 E year of construction: 2001 Pitch: adjustable Optionally available: Redpek Aa S Tsfx Airoch Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loading height incl. approx. 890 mm, 24 lashing eyes each 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the sides, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, price: 500 ¤, , hydraulic displacement of the ramps, price: 1,000 ¤, , excavator trough, price: 1,000 ¤ net, , , --  Misprints, errors and changes reserved, sample- Pictures --, More data at: !, More Details: ! Rcods Agt Hpjpfx Airoh

Condition: used, machine/vehicle number: WFDFLT33502019721, empty load weight: 6,927 kg, maximum load weight: 28,073 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: black, Equipment: VDI 2700 certified, Attention: The pictures shown are archive images. The vehicle may still be in operation! Chassis Fine-grain steel welded chassis with lightweight design, equipped with a replaceable 2" kingpin. Slightly angled outer frame with Load-Lock profile for load strap attachment. Note: When sideboards are fitted, they must be opened before straps can be attached. Not usable in the gooseneck area. Additional 10 pairs of recessed lashing rings, each rated at 2.5 t. 24-tonne two-speed landing gear with single-side operation and straight foot, without compensating mechanism. Foldable front support legs, extendable and foldable outward in front of the headboard; positioned as far inward as possible during transport. Rear access ladder, side-mounted door retainers, wheel chocks with holders, aluminium side underrun protection, galvanized steel rear underrun protection, quarter fenders in front of the first axle and behind each axle, anti-spray mudflaps behind each axle, rear impact protection with Heavy Blocker cross beam, heavy-duty pallet stop on both sides (approx. 20–25 mm high) with lashing points every 200 mm. Loading height reduced by approx. 20–25 mm. Plastic toolbox. Axles & Suspension SAF disc brake axles with air suspension, without lift axle. Braking System Dual-line air brake system with spring parking brake. Two colour-coded coupling heads at the front without connecting lines. Electronic Braking System (EBS) with front EBS socket (without connecting cable). Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality. Equipped with raise/lower valve and Vehicle Stability System (RSS). Rcodpfx Ajkyrlwsirsh Electrical System 24 V electrical system with multi-chamber lights, yellow LED side marker lights, two white LED front position lights, two red/white rear outline marker lights, and 2 × 7-pin plus 1 × 15-pin front sockets (without connecting cables). Floor Steel front floor section with anti-slip coating. Approx. 30 mm phenolic plywood floor, Omega-reinforced cross joints, longitudinal support beams for high point loading, suitable for forklift axle loads up to 7,100 kg. Steel chequer plate flooring in the wheel area. Front Wall Front bulkhead approx. 2,580 mm high with steel corner posts in volume design. Front curtain release mechanism. Internal steel impact protection up to approx. 140 mm height. Sliding Posts Three pairs of full-length sliding posts with four socket positions and extended lower pockets. Three post positions with aluminium side slats. Rear Frame Steel rear corner posts extending to roof level, curtain tensioning system with round tube and ratchet. Double rear portal doors with two internal locking rods per door. Curtain PVC curtain with welded horizontal and vertical reinforcement straps, stainless steel tension buckles, and customer branding on the rear portal. Roof Sliding roof with rear end-lift, opening from rear to front. L-roof beams suitable for automotive logistics. Internal roof width approx. 2,490 mm. White roof curtain. EcoLift lifting roof, adjustable by approx. 380 mm with gas strut assistance. Anti-Ice System with centrally positioned hose and automatic ventilation. Registration & Certification Approved for registration in Germany, type-approved according to EC Directive 2007/46. EN 12642 XL load securing certificate (valid only with four rows of aluminium side slats), additional DC 9.5 certificate

Year of construction: 2018, condition: used, functionality: fully functional, This is an SCC 61 WE combination steamer in an electric version, from the premium manufacturer Rational, manufactured in 2018. The combination steamer is a unit from the latest SCC series, featuring triple-glazed glass and LED lighting. The unit has undergone a thorough inspection in our in-house workshop and the combination steamer is fully functional. The base frame shown in the picture is not included in the offer, but can be purchased as an optional extra. These are example images. Original images will follow shortly. The unit is available from approximately week 46. The recommended retail price is €9,400 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational model? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all model types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs • High-quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • tested & fully functional - or money back • Flexible choice of shipping or self-collection • Competent advice - before and after the purchase • Provision of operating instructions, connection diagrams & spare parts • Inspection according to DGUV V3 Redpfx Aij Agt Dxjrsch Technical data: • W x D x H: approx. 847 x 776 x 782 mm • Minimum door opening dimensions for transport W x H: 845x850mm • Power connection: V: 400 / kW: 11 / Hz: 50/60 • Capacity: 6x 1/1GN • Weight: approx. 110 kg • Serial number: E61SI18012643040 • Year of manufacture: 2018 Condition: used, inspected, fully functional Additional information: • In combination steamer mode, 3 operating modes are available: steam (30°C to 130 °C), hot air (30°C to 300°C) and combination (30°C to 300°C) • Care Control - self-cleaning • Core temperature probe • Handheld spray with automatic retraction • 8.5 inch color display and touchscreen • 5 fan speeds programmable • Integrated, maintenance-free grease separation system • Automatic start time preselection • 7 cleaning levels for unattended cleaning - also overnight • Moistening adjustable in 3 stages - from 30°C to 260 °C • 5 programmable proofing levels • USB interface • Seamless, tub-shaped hygiene cooking chamber, rounded corners • Halogen cooking chamber lighting Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 470 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 160 mm, About Us Since 2014, we have been developing and producing our machines in Austria as a machine manufacturer. In addition to our standard machines, which can be individually customized, we are also able to offer special solutions. We will gladly send you our product catalog; simply contact us. Further information can be found at amt – machinetools . com Machine Frame ECO 532C CLEARANCE SALE – while supplies last Due to the further development of our machine series and the transition to the HSC 544, the remaining ECO 532 machine frames are being offered at an attractive clearance price. Travel range X 470mm (710mm with portal extension for tool changer) Y 330mm Z 160mm (longer travel range available upon request) Machine bed made of mineral cast - high rigidity - high vibration damping - high thermal stability - compact dimensions with a depth of approximately 660mm, allowing it to pass through very narrow doors during installation - weight approximately 400kg Guides and drive - Linear guides, size 20, on all axes - Ball screws with a diameter of 25mm on the X axis, diameter 20mm on the Y and Z axes Scope of delivery Machine frame including portal extension, fully assembled and calibrated. Includes: - Linear guides, ball screws and bearing units - Machine table - Z axis and cross plate Rjdpfx Aez N Alkeirjch The pictures show some optional accessories that are not included in the scope of delivery. For example, spindle, motors, guide rail covers, tool changer, cabin, etc. Numerous options and extensions are available. We will be happy to provide you with expert and comprehensive advice to offer you the perfect solution for your machining task. The offer does not include VAT. Delivery time and payment terms are subject to agreement.

Condition: used, mileage: 17,000 km, power: 110 kW (149.56 HP), color: white, gearing type: mechanical, Equipment: ABS, air conditioning, central locking, power assisted steering, - Tel: , Mr. Kiel will be happy to assist you. To ensure you receive the best possible advice, we kindly request that you schedule an appointment. A50 Front axle with increased load capacity, AR2 Axle ratio i = 3.923, BA3 Active Brake Assist, C6L Multifunction steering wheel, CB7 Stabilization Level I, CL1 Steering wheel adjustable in inclination and height, CW2 Omission of vehicle lowering, D03 High roof, D50 Solid partition, E1D Digital radio (DAB), E57 Electrical system for trailer socket, E7B Navigation pre-installation, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, ES0 Jump start assist Contact, EW6 Pre-installation for Remote Services Plus, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F1K Coat hooks in the cab, F64 Exterior mirrors, electrically folding, F68 Exterior mirrors, heated and electrically adjustable, F907 MODEL SERIES 907 TRANSPORTER VS30, FF5 Storage compartment above the windshield, FJ4 Storage compartment under the dashboard, FR8 Rear view camera, GD8 6-speed manual transmission ECO Gear 360, H21 Heat-absorbing glass with band filter in the windshield, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IR6 Wheelbase 4325 mm, overhang 1615 mm, IT4 3.5-ton vehicle, J10 Speedometer km/h, J55 Seat belt warning system for passenger seat, J58 Seat belt warning system for driver seat, J65 Outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JB4 Active Lane Keeping Assist, JF1 Rain sensor, JG0 Gear shift indicator, JH3 Communication module (LTE) for digital services, JI7 Start-up mileage, maintenance interval 60,000 km, JK5 Instrument cluster with color display, JS2 Intelligent Speed Assist, JW8 ATTENTION ASSIST, K13 Main tank 71 liters, L LEFT-HAND DRIVE, L65 Ceiling light(s) in cab/passenger compartment with door contact, L94 Omission of parking lights, LA2 Headlamp Assist, LB1 Lateral marker lights, LB5 3rd brake light, LC2 LED light strip in the cargo area, LE1 Adaptive brake light, LX5 Europe, M60 Generator 14 V / 250 A, M72 Vehicle compatible with HVO, MJ8 ECO start/stop function, MS1 Cruise control, MT5 EMISSION CLASS EURO 6e RDE5 N1, MU3 OM 654 DE 20 LA 110 kW (150 hp) 3800/min, P2L Cargo area package, RX5 Wheel manufacturer Maxion Wheels, RY2 Tire pressure monitoring system on front and rear axles, wireless, S02 Driver's seat, S22 Armrest for driver's seat, S23 Passenger seat, double seat, SA5 Airbag, driver, SA6 Airbag, passenger, SK2 Seat occupancy recognition, driver's seat, T16 Sliding door, right, T75 Grab handles for entry, driver and passenger, T77 Grab handle for entry, cargo area sliding door at partition, T85 Entry handle on rear left corner post, T86 Entry handle on rear right corner post, V42 Lashing rails, side wall on roof rail, V43 Wooden floor, V94 Cable duct on side wall, V95 Cable duct on rear portal, VA2 Interior paneling cargo area up to roof height (wood), VC4 Lashing rails, side wall on roof frame, VF7 Fabric Maturin black, W54 Rear doors, double-wing, opening to side wall, W5F Additional retainer for rear doors at 90 degrees, W73 Step, rear door We will gladly provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with an individual offer. Mr. Kiel will be happy to assist you. IMPORTANT: Viewing only by prior arrangement! All information without guarantee, errors and prior sale excepted! Pictures are for illustration purposes Rjdpfx As Agx Swoirsch