Used Pipe Production for sale (17,789)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 6 h, functionality: fully functional, machine/vehicle number: HS-40A, controller model: auto or semi-auto, Technical Parameter Description of Steel Pipe Sealing Machine HS-40A Automatic Heating Sealing Machine. Its main features are as follows: Gjdpfxjvu Ryfj Af Nett This full - automatic heating sealing machine is equipped with a Kewei intelligent controller and a touch - screen for control, hydraulically driven, with high - frequency heating, and features man - machine interactive operation. The setting input is simple and convenient. It allows for arbitrary selection and automatic conversion between manual and automatic modes. The movable switch button has two functions: sealing and positioning. It has high safety and a counting function, enabling one - time forming of the seal. The overall machine has stable performance and high efficiency, making it an ideal equipment in the pipe - fitting sealing processing industry. A high - efficiency hydraulic cylinder drives the rack, and the gear rotates to achieve sealing. The specially designed fixture has strong and reliable clamping force, ensuring safety without damaging the surface of the workpiece. The coolant circulates automatically to ensure the long - term operation of the equipment. Sealing capacity (steel, stainless steel, alloy materials, etc.). Note: Tests are required for different pipe - fitting materials. HS-40A Automatic Heating Sealing Machine include: 1. Equipment Instruction Manual. 2. Equipment Operation and Debugging Instruction Manual. 3. Maintenance Record Sheet. It takes about 30 - 40 seconds for spinning both ends of one product. The wall thickness of the pipe is 1.0 - 2.5mm. The length of the pipe is 50 - 600mm.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 24 h, functionality: fully functional, machine/vehicle number: DEGET202309, total height: 2,400 mm, total width: 1,500 mm, total length: 3,420 mm, manhole location: top, type of input current: three-phase, overall weight: 1,000 kg, input voltage: 380 V, machine base height: 200 mm, operating pressure: 2 bar, control cabinet width: 200 mm, control cabinet length: 650 mm, control cabinet height: 650 mm, year of last overhaul: 2023, temperature: 100 °C, cone diameter: 150 mm, control voltage: 380 V, operating temperature: 100 °C, overpressure (max.): 2 bar, water tank capacity: 1,000 l, tank capacity: 1,000 l, warranty duration: 24 months, Equipment: CE marking, Used 1000L Two-Vessel Brewhouse Mash/Kettle + Lauter Tun Used 1000-liter brewhouse, previously operated in a craft brewery. Configuration: • 1 × Mash / Kettle vessel • 1 × Lauter Tun Key Specifications: • Capacity: 1000 L per batch • Material: Stainless steel SUS 304 (316 optional) • Heating: Steam jacket or electric (to be confirmed) • Insulated vessels • Food-grade polished interior Mash / Kettle: • Combined mashing & boiling • Top manway • CIP spray ball • Temperature probe port Lauter Tun: • Stainless steel false bottom / wedge wire screen • Spent grain outlet • CIP spray ball • Top manway Gtodpjx Ib Hhofx Af Nst Condition: • Used, good working condition • Cleaned and maintained • Inspection available Notes: Pumps, control panel and auxiliary equipment available on request. Photos and videos can be provided.

Condition: excellent (used), Lightly used automatic TC, TU, TZ profile production lines, designed for manufacturing and roll forming TC, TU, TZ profiles up to 1.5 mm metal thickness. Technical Specification: Gtsdjx Sx R Sopfx Af Net Manufactured in: Estonia Adjustable profile height: 100 – 250 mm Profile width: 50 mm Profile edge (folded): 15 mm Minimum rollable sheet thickness: 1 mm Maximum rollable sheet thickness: 1.5 mm Roll distance: 300 mm Machine dimensions: 900 x 4000 mm The machine is not equipped with a guillotine or perforating rolls. Operation is straightforward, controlled via two buttons. If you have further questions, we will be happy to answer them.

Condition: excellent (used), Sale of 4 complete roll forming lines + 1 spare part. Production of spacers and glazing beads made of aluminum and stainless steel. Modernized lines: two equipped with servo motors, the remaining with cardan shaft drive. Lines feature automatic loading, cutting, high-frequency welding, as well as automatic collection and packaging. Individual lines can be purchased separately. Gtodex Da A Rspfx Af Nst Freely selectable cardan shaft-driven lines at a price of €42,000 per unit / 2 units available. Servo motor-driven lines at a price of €95,000 per unit Quantity: 2 units PRICES FOR A PACKAGE OF 4 LINES + ONE SPARE LINE Price: €299,000 – catalogue price Price: €199,000 – special offer valid until 31 December 2025 Patents valid until 2033 and the HELIMA brand can also be acquired.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, overall weight: 4,000 kg, power: 17 kW (23.11 HP), total width: 1,510 mm, total length: 6,500 mm, total height: 1,820 mm, Automatic paper roll paper lid machine with inline packing machine for 8oz and 12oz cups Speed - 70~100 pc/minute Raw material - One-side or two side (polyethylene)film coated/laminated paper (Like the PE coated paper; PLA paper; card boad paper with film) Gtjdpfoxur Hijx Af Net Paper Lid Size - for 8oz and 12oz Working Power - 12kw Total Power - 17KW, Power Source - 3-phase, 380V, 50/60Hz, User Need To Buy Air Compressor

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: PVC TEK KAFALI ÜRETİM GRUBU, • Enables production of 40 - 60 windows in an 8-hour work environment • Our set, which offers the most competitive price for the customer through various machine options • Available in 380 Volt or 220 Volt versions • Compliant with CE (European) standards • Door-to-door pricing for worldwide delivery • References from existing customers in your country MACHINE CONTENTS • SC101 S Single Corner Welding Machine Gedpfsrc H Hfox Af Nstt • SC 211 Aluminum & PVC Mullion Processing Machine (2 blades) • SC 301 PVC Bead Cutting Machine or SC 301 S Aluminum & PVC Bead Cutting Machine without mold (applicable to 12 different beads) • SC 401 Aluminum & PVC Under-Cutting Saw (includes Ø450 mm saw blade) • SC 501 PVC Handle Drilling, Grooving, and Water Drainage Machine or SC 502 S Aluminum & PVC Handle Drilling, Grooving, and Water Drainage Machine (High-Frequency Motor) • SC 601 PVC Corner Cleaning Machine (3 blades)

Year of construction: 2009, condition: reconditioned (used), Complete plant for the production of wood wool/wood shavings out of logs with a lngth up to 3,0 m. Total capacity about 4 to/h. Complete control system including knife grinding machine, several planer heads, conveyor system for wool transport. Exhausting system. very good condition. Gedpfx Afoiiia Rs Nstt

Condition: good (used), Offer consisting of: Duplo DC 10/60 collator, Duplo DBM 500, Duplo DBM-500T Gtsdox Ttf Tspfx Af Not

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Gsdpfx Afsx Tu N Hj Nstt Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...

Condition: used, functionality: fully functional, Vibrating conveyor pipe (pipe vibrating feeder) Gtodpstphphsfx Af Njt Diameter: 300 mm Length: 6,000 mm Driven by 2 vibromotors with 0.75 kW each

Condition: new, functionality: fully functional, Year of construction: 2025, A sand aggregate or gravel production plant is a facility where raw materials like sand, gravel, and other aggregates are processed to create various products used in construction and other industries. These facilities typically involve a series of processes to transform raw materials into the final products. Here is a general overview of the key components and processes involved in a sand aggregate or gravel production plant: 1. Mining and Extraction: - The process starts with the extraction of raw materials from quarries or mines. Heavy machinery such as excavators, loaders, and bulldozers are used to remove the raw materials from the earth. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. 7. Quality Control: - Quality control measures are implemented to ensure that the final products meet the required specifications and standards. This may involve regular testing and analysis of the materials. 8. Environmental Considerations: - Sustainable practices and environmental considerations are crucial in the operation of a production plant. Measures such as dust control, water recycling, and rehabilitation of mined areas are often implemented to minimize the environmental impact. 9. Maintenance and Safety: - Regular maintenance of equipment is essential for the smooth operation of the plant. Safety measures are also critical to protect workers and ensure compliance with regulations. 10. Final Product: - The final products from a sand aggregate or gravel production plant may include various grades of sand, gravel, crushed stone, or other types of aggregates used in construction, concrete production, asphalt production, and other applications. Gjdpfx Ajq Nia Isf Nott It's important to note that the specific processes and equipment used in a production plant may vary based on the type of raw materials, the intended final products, and local regulations. Additionally, advancements in technology and sustainability practices may influence the design and operation of such facilities.

Condition: ready for operation (used), Year of construction: 2006, functionality: limited functionality, year of last overhaul: 2006, workpiece weight (max.): 650 kg, milling spindle length: 350 mm, feed mixtures Gsdpfx Asx Sxbkef Njtt

Condition: excellent (used), Year of construction: 2023, tube diameter 42.0 x 3.0 STAHL mm tube diameter 30.0 x 2.0 EDELST mm bending angle max. 180 ° bending radius max. 100 mm bending speed 2.0 U/min. Control NC voltage 400 V total power requirement 0.55 kW weight of the machine ca. 115 kg Current new price approx. 4.200 Euro Very good condition / with machine base Description: - NC electro-motor tube bending machine - mandrelless * up to 50 programs can be stored - Automatically returns to the starting position - Maximum bending capacity for 42 x 3.0 mm steel tubes - Excellent bending quality with very tight bending radii (from 2x tube diameter) Gtedex U El Iepfx Af Net . and bending angles between 0° and 180° - Easy operation - High accuracy and reliability - Quick tool change (within seconds) - Easy to transport - Includes machine base

Condition: good (used), Year of construction: 2005, functionality: fully functional, Homag parquet flooring line Lenghwise FPR 225 minimum wide 135mm Maximum wide 400mm Godpfxsx Sxzwo Af Nstt 5+5 motors suitable for click HOMAG FPR 226 CROSSWISE minimum lengh 400mm Maximum length 1500mm( could by modified to 3000mm) 5+5 motors suitable for click

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox PrimeLink C9070’ Object of sale: 1 x Xerox PrimeLink C9070 with the following equipment: incl. Fiery Server EX C9065 incl. Paperdeck A-CF01 incl. booklet finisher A-FN13 incl. SquareFold with front trim incl. Vivid kit for changing. Colours: White, gold, silver, transparent incl. fluorescent kit for changing colours. Colours: fluorescent cyan, magenta, yellow Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,189,345 pages Colour: Approx. 1,049,230 pages Black: Approx. 140,115 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Gtjdpevtycysfx Af Not Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, Year of construction: 1999, tube diameter bis 60 mm weight of the machine ca. 1,8 t Godpfx Afevvnm So Nett

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. Gtjdpfoq Ngb Dsx Af Njt 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Condition: used, functionality: fully functional, Item: DP-0601-Pump APV W+30/80 APV - Centrifugal pump Gtjdex Tuu Ajpfx Af Njt Brand: APV/SPX Type: W+30/80-3220 130 Motor: 4.0 kW Speed: 2860 rpm Year: 1997 Inlet: 4" / Outlet: 3"

Condition: new, Year of construction: 2025, SPIRAL DUCT PRODUCTION MACHINE Metformer MTF 1602 TUBEFORMER Designed for the production of round SPIRO-type ducts. The produced duct complies with DIN EN 12237, BS, and Eurovent standards. Features: Coil decoiler with vertically adjustable brake Forming strips for duct production Burr-free high-speed cutting with circular cutting blades LCD touchscreen control Automatic lubrication system Automatic cutting during duct production Production reporting system (daily-weekly-monthly output) Automatic error detection Technical Data: Diameter range: 80–1600 mm Thickness range: Galvanized steel: 0.4–1.2 mm Stainless steel: 0.4–0.7 mm Aluminum: 0.4–1.3 mm Strip width: For 0.4–1.0 mm thickness: 137 mm For 1.1–1.3 mm thickness: 140 mm Production speed: 60 m/min Motor power: 11.25 kW Gsdpfjwa Skhox Af Njtt Beading: Smooth, single or double Lock: External lock Cutting system: Circular cutting system Weight: 2900 kg Machine dimensions: 1900 × 2050 × 1500 mm Decoiler dimensions: 1780 × 1130 × 1250 mm Table dimensions: up to 2700 × 950 × 1200 mm Operating Environment: Power supply: 3-phase, 380V, 50Hz Clean surroundings Maximum ambient temperature: 40°C Minimum ambient temperature: -5°C Humidity: 55–85% Altitude:

Condition: new, tube diameter 60.3 x 4.5 mm ST tube diameter 60.3 x 5.4 mm ALU tube diameter 2" x 3.91 mm GAS bar material - diameter 35.0 mm revolutions per minute 2.0 U/min bending radius min. 10.0 mm bending radius max. 270 mm external diameter min. 5.0 mm Gjdpfx Afex Urtle Nstt external diameter min. 1/8 Zoll voltage 230 V total power requirement 1.5 kW weight 76.0 kg range L-W-H 302 x 243 x 674 mm Equipment: - mandrel-less tube bending machine - Model "M" = ELECTRO-HYDRAULIC SINGLE-PHASE - high performance and compact design - completely hydraulic machine - bends 210° without the need to catch up - no electronic control - Ercolina patent n. 102017000142179 - control of the bending angle via adjustable angle scale - mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE

Condition: new, Year of construction: 2016, operating hours: 9 h, functionality: fully functional, BMCtouch Integrated Automation System The control system, constructed in modular design, includes the following components: - PLC in industrial-standard design for machine control - Industrial PC for visualization and data management - Swivel-type operating and display panel with 19" TFT touch screen Performance Features: - User interface and functionality as per previous BMCtouch systems - Temperature control with self-tuning function - Pre-heating and start-up program - Prepared for data transfer to haul-offs with BMCsmart control systems - Operation of haul-off and saw from extruder terminal - CANopen Interface DS420 V2.0 - Flexible process display with individually configurable summary pages and customizable background - Configurable alarm management and alarm history - Trend data acquisition and presentation - Order management/administration - Configurable access authorization - Online assistance - Suitable for independent multi-user operation - Additional memory for history trends - Network capability - Modem Integration of Central Air Supply Co-extruder, BCE 1-30-25D - Stand-alone machine - Synchronization with main extruder via CANopen, DSP 420 V2.0 - AC drive incl. gearbox - Nitrided screws - BMCeco operator terminal - Product of battenfeld-cincinnati China branch Extruder, solEX 75-40 i Designed for pipe extrusion Technical Data: - Screw diameter: 75 mm - Effective screw length: 40xD - Drive power: 300 kW - Barrel heating zones: 5 pcs. - Barrel cooling zones: 5 pcs. - Total installed power, max.: 347.37 kVA Die heating zone incl. thermocouple (6 kW, 230 V) (BMCtouch control) Extrusion Die, helix 500 VSI-TZ Designed for the extrusion of PO pipes - Two-step distributor consisting of smoothing thread and compact lattice basket - Base die and die set made of tempered steel - Material flow surfaces are polished - Pipe O.D.: 90 - 500 mm - Number of heating zones: 17 Co-extrusion ring for 4 color stripes Calibrating sleeve, type 6 For PO pipes vacStream 500-6 No. 1 Designed for calibrating and cooling of pipes - Closed stainless steel tank with welded feet - Tank on rollers with height and lateral adjustment - Rust-proof hinged lids - Central water inlet and outlet - Pipework made from rust-proof materials - Manual reversible flow filter unit with bypass - Mechanical vacuum control - Temperature display Technical Data: - Pipe diameter range: 90 - 500 mm - Number of solid taper nozzles: 162 pcs. - Number of spray rods: 6 pcs. - Max. vacuum: 0.7 bar - Length of vacuum chamber: 5500 mm - Total length: 5900 mm vacStream 500-6 No. 2 Designed for calibrating and cooling of pipes coolStream 500-6 4 For pipe cooling - Closed stainless steel tank - Base frame with height-adjustable feet - Rust-proof, hinged lid - Central water inlet and outlet Gsdpfjx Sbc Rex Af Nett - Pipework made from rust-proof materials - Manual reversible flow filter unit with bypass - Temperature display - Spray rods made of PVC - Solid taper nozzles with bayonet lock - Visual monitoring of pumps - Drip trays at inlet and outlet - Water circulation pump pullStream R_ 500-6 E Designed for pipe haul-off cutStream RTAplus 500 For chipless cutting of PO pipes

Condition: used, Year of construction: 1999, tube diameter 12-54 mm (Kupfer / Edels. mm serial number EBD mode of operation Schneiden/ Entgraden / Re speed Rollen 450 U/min m/min Godpfx Asumyhlsf Nott

Condition: new, Year of construction: 2025, Gravel and aggregate production equipment is used to crush, screen, and process stones, rocks, and other materials for the construction industry. This equipment is essential in producing various types of aggregates, including crushed stone, gravel, sand, and recycled concrete, which are used in the construction of roads, buildings, bridges, and other infrastructure projects. Here are some common types of equipment used in gravel and aggregate production: 1. Jaw Crusher: - Jaw crushers are primary crushers used to break down large rocks into smaller, more manageable pieces. They are essential for the initial stage of aggregate production. 2. Impact Crusher: - Impact crushers are used to crush rocks and stones with the help of impact force. They are suitable for shaping and producing fine aggregates. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They produce well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They are suitable for processing materials with high abrasiveness. Gtodpfoq Nxz Dex Af Net 5. Screens: - Vibrating screens are used to separate different sizes of aggregates. They classify the material based on particle size and ensure that the final products meet specified gradation requirements. 6. Scalping Screens: - Scalping screens are used to remove oversized materials before they reach the primary crusher. This helps to optimize the crushing process and prevent damage to the equipment. 7. Washing Equipment: - Washing equipment, such as sand screws or log washers, is used to remove impurities and fine particles from aggregates. This is particularly important for producing high-quality concrete sand. 8. Conveyors: - Conveyors are used to transport materials between different stages of the crushing and screening process. They play a crucial role in enhancing efficiency in material handling. 9. Stackers and Reclaimers: - Stackers are used to create stockpiles of processed aggregates, while reclaimers are used to retrieve the material from the stockpile. Both are essential for efficient material storage and handling. 10. Crushing Plants: - Complete crushing plants include various types of crushers, screens, and conveyors integrated into a single system. These plants are designed to handle large volumes of material efficiently.

Condition: used, Year of construction: 2011, Technical details: tube diameter: 60 mm wall strength: 3,0 mm bending radius min.: 20 mm tube diameter max.: 60 mm wall thickness max.: 3,0 mm Gtsdpfex Sll Asx Af Njt tube pipe draw up length: 1500 mm bending angle max.: 180 + Auffederung ° Number of working hours: ca. 34 797 h Total power requirement: 55 kW Weight approx.: 8,0 t machine dimensions LxWxH: 6,3 x 3,3 x 1,9 m dimensions electric cabinet LxWxH: 2,7 x 0,7 x 2,0 m dimension device 1: Steuerpult: 0,9 x 0,6 x 1,85 m dimension device 2: Rohrmagazin: 1,8 x 2,4 x 1,75 m This is an automatic pipe cold bending machine. Multiple radii can be bent. Radius differences freely programmable via CNC control up to 6 levels. Pipe positioning device in NTB design Pipe diameter: min. Tube Ø : 16mm max. capacity of machine Tube Ø x wall thickness: mild steel=Ø 60x3 mm and stainless steel=Ø 57x2 mm Bending radius to pipe center: min. Ø 20 mm max. Ø 200 mm Bending to left. max. tensile strength of the material to be bent: Stainless steel 750 N/mm² mild steel 450 N/mm² max. bending speed: FORWARD, infinitely variable / programmable 22.0 1/min. RETURN, constant 22,0 1/min. Height adjustment multiple radii: lowest tube center 55 mm Height travel suitable for 3-groove bending tools Twisting: Twisting angle max. 360°; speed 50 min-1 -gripper -tube magazine Schwarze-Robitec, tube length min./max.: 400 7 1500 mm, tube outer Ø min./max.: 28 7 60 mm -Hydraulic filling volume 340 liters -Hydraulic operation for: bending table drive; tool clamping; slide rail pressure, direct acting; reinforced slide rail feed and return; mandrel return feed device -operator/control panel from Schwarze Robitec -2x foot contact operation -cooling unit on control cabinet Rital, type SK 3361100 accessories: div. bending tools for Ø 60 mm tube div. auxiliary tools *

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. Gsdpoq Nyzbofx Af Nott 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.