Used Plasma Prof 70 for sale (14,369)

Year of construction: 2018, condition: excellent (used), functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 2,000 mm, load hours: 9,635 h, sheet thickness steel (max.): 20 mm, type of input current: three-phase, machine/vehicle number: 541, Equipment: documentation/manual, For sale: Stigal Dynamic plasma cutting machine, year 2018, table size 2 x 6 m. The machine is in very good condition and fully operational, equipped with: - CNC control system Blodpfx Asy Exfcektep - HS Plasma Torch Carrier (Z-axis speed: 165 mm/s) - Voltage-controlled torch height regulator - Dynamic material detection system - Vertical anti-collision system - Automatic UV screen - CAD/CAM software - Segmented extraction table with zone control - Roller guide for thin sheet metal - CEBORA PROF 166 HQC plasma source Technical specifications: Manufacturer: STIGAL Marcin Stępień Model/Name: Dynamic Machine Serial number: 541 Year of manufacture: 2018 Country of manufacture: Poland The Stigal Dynamic plasma machine is an industrial CNC plasma cutting system. It requires 400V three-phase power for proper operation and has a power consumption of 5.5 kW. This is an ideal machine for industrial applications in metal and sheet processing plants. The Plasma-Gas Cutter is designed for fast and precise cutting of steel sheets of various thicknesses. Transport within the EU is possible. VAT invoice available.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Bljdpfx Asy D I I Roktop Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function Flow measurement Automatic water change function PT 100 sensor Bodpox Ek Rdefx Aktslp Interface for TTY 20 mA via 9-pin D-Sub connector

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 Blodpfxoy E N Hdo Aktep 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit

Condition: good (used), Year of construction: 2001, For sale is a Felder KF-700 SP circular saw/milling machine with a cutting length of 3200 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical data: - Cutting length 3200 mm - Cutting width 850 mm - Cutting height 103 mm - Max. saw blade diameter 315 mm - 4 milling speeds - Direction of rotation switch - 3 motors, each with 3 kW / 4.1 hp - Year of manufacture 2001 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, combined machine Reference: R-B17MP Bljdpfjzichysx Aktop

Condition: excellent (used), Year of construction: 2023, DEMONSTRATION MACHINE! For sale is a used Felder KF 700 SP sliding table saw & spindle moulder with a cutting width of 800 mm. The machine is in excellent condition and has been refurbished and inspected by our professional staff. (Fully functional) Technical data: - Tilting circular saw and spindle moulder 90-45° - Sliding table 2500 mm - Extension table with mitre fence 2600 mm - Rip fence with fine adjustment - Cutting width 800 mm Bledsy Hgxmjpfx Aktep - Spindle fence with multi-adjustment system - 4 spindle speeds - 3 motors, each 7.5 HP (5.5 kW) - Automatic star-delta start The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, spindle moulder, combination machine, combi machine, milling machine Reference: R-D1618

Year of construction: 2026, condition: new, NEW Plasma Cutter. Includes CAD/CAM software. Data transfer (DWG and DXF formats) via USB and network card. CE marked. ISO 9001, GB/T 19001 certified. 120 A generator. The production cost is incredibly low: only 5.5 kW and compressed air are required! Maximum cutting thickness (steel): 22 mm Maximum cutting thickness (aluminum): 16 mm Blsdo Afnrgspfx Aktsp Maximum cutting thickness (stainless steel): 12 mm

Condition: used, functionality: fully functional, Year of construction: 2007, The temperature control unit from Plasma/Single is for sale; there are 2 units available for sale, and the price is per unit! Blodjzul N Rspfx Aktop Medium: Oil Maximum operating temperature: 180°C Heating capacity: 6 kW Cooling capacity: 14 kW External cooling fan... PT 100 sensor Interface 0-20 mA

Year of construction: 2020, condition: excellent (used), Stationary Piston Compressor Aircraft AIRPROFI 703/270/10 V Used: Year of manufacture 2020 - Top condition - Stationary compressors with a vertical 270 l tank offer maximum performance in a compact space. Robust design and best quality Fully automatic on/off operation Equipped with all safety devices Completely ready for connection Fifteen-year guarantee against rust on the internally and externally hot-dip galvanized compressed air tank Quality electric motor High-quality electric motor with high starting torque is equipped with a motor protection switch Starting capacitor and starting relief valve ensure easy starting Standard equipped with a phase inverter for easy manual reversal of the direction of rotation Compressed air compression via high-performance HOS unit The starting relief valve ensures easy, pressure-free starting The two-cylinder high-performance unit made of gray cast iron and the low speed guarantee particularly quiet and low-vibration operation; this ensures a long service life due to minimized wear Optimal lubrication of the compressor for high service life and reliability Equipped with a high-quality intake filter Aftercooler with large cooling fins results in a low tank inlet temperature and less moisture in the compressed air to protect the compressed air tools Additionally with an intercooler to the aftercooler Corrosion-resistant valve plates for improved heat dissipation and longer service life of the compressor Optimal cooling of the compressor by a large fan wheel and a cooling air deflector on the cylinder Stable metal belt guard for optimal protection of the components and for high user safety No vibration breaks in the compressed air supply line to the tank due to flexible armored hose with heat protection High-quality drive belt Powerful and efficient drive The toothed drive belt facilitates starting, improves running smoothness and power transmission, and reduces power consumption by up to 30% Stable metal belt guard Operation on the service block Equipped with a high-quality CONDOR pressure switch with a robust push-button function for fully automatic on/off operation Air outlet on the service block via a comfortable safety quick coupling Only fixed screw connections on the service block, no hose connections High-quality tank with permanent rust protection Air outlet ¾" Length (product) approx. 780 mm Width/Depth (product) approx. 680 mm Height (product) approx. 1870 mm Weight (net) approx. 152 kg Automatic pressure switch CONDOR Drive transmission V-belt, toothed Material of compressed air line Flexible armored hose with heat protection Compressed air outlet Ball valve Condensate drain Condensate drain valve Compressed air tank Internally and externally hot-dip galvanized with a fifteen-year guarantee AD 2000 compliant yes Tank base Vibration dampers Connection plug 400V CEE plug with phase inverter Connection voltage 400 V Mains frequency 50 Hz Output power 4 kW Bedpoz Rq Eusfx Aktelp Input power 4.81 kW Sound pressure level Lp 83 dB(A) Explanation of sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor system HOS Intake capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation of filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 950 min¯¹ Maximum pressure 10 bar Tank capacity 270 l Location: available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Robotic gantry system for metal sheet and profile cutting 3D robotic gantry system for plasma and oxy-fuel cutting has double-side drive, precise positioning system by racks and pinions on the 3 linear axes with exceptional speed and dynamics. Zero-backlash on the 3 rotational axes allow 4-side machine processing of profiles and round tubes. Blsdpfx Akeh I Nw Dotjp Precise gearboxes with minimum backlash, dynamical engagement of the motors to the racks, and rigid guide system allows smooth movement, excellent cut quality of corners and small holes. The gantry system has a cantilevered part crossbeam, which allows profile cutting in a cabin especially designed for this purpose. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 1500 mm Beams and profiles types: T, L, H, U, rectangular tube, round tube Maximum dimensions of beams: Width up to 1200mm Rectangular tubes: Cross-section up to 600x600mm KEY FEATURES ▪ Stable metal construction with precise linear guides and servo-drives with racks and pinions on all axes; ▪ High dynamics, on all X, Y and Z axes: up to 30 m / min speed and acceleration up to 3 m / s²; ▪ 3D control on seven axes allows for a higher level of CNC programming; ▪ Maximum use of machine resources, thanks to the concept of combined processing of sheets and profiles - the ability to 100% load the machine when switching between sheets and profiles, without downtime for loading sheets and profiles and unloading cut parts ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Condition: used, Graphtec CUTTING PRO FC7000MK2-100 grit-rolling digital servo plotter for cutting foils, vinyl and other materials Cutting width: 100 cm Max speed: 148.5 m/min Knife pressure: 0.196-5.88 N / 20-600 gr Bjdpfx Ae Aaxtwektelp Control panel with buttons for position, menu, test cut and etc. Compatible with software for cutting like Cutting Master Ports for PC connection Comes with stand and waste bag In very good working condition

Condition: used, Edge banding machine Brand: Brandt Bodpfxeynhwfo Aktelp Model: Profiline KDF 670-C Hiflex Single-sided edge banding machine in right-hand design, for hot melt gluing. Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications. Leak-proof glue reservoir under the glue roller. Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary. Glue roller with selectable rotation direction for counter or forward feed. Glue temperature monitoring via electronic thermostat. Automatic reduction of glue temperature during work breaks. Infrared heating for hot melt reactivation. Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm. Standard equipment with edge banding and workpiece – distance monitoring with optical display. Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers. Standard equipment with automatic central lubrication for the transport chain. Motor-driven adjustment of overpressure. Control panel at the machine infeed. Technical data Edge strip thickness: 0.4 – 12 mm Cutting tool: max. 3.0 x 45 mm or 0.8 x 65 mm Workpiece thickness: 8 – 60 mm Feed speed: 11 – 16 m/min (see below) When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min. automatically to 14 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: 400 V, 3-phase, 50 Hz Compressed air connection: 6 bar Connected load approx. 17 kW Machine length: 6,860 mm Full information about the machine can be found on our webpage burbagemaskin.se

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,400 mm, total length: 1,500 mm, machine base height: 1,400 mm, overall weight: 350 kg, Hello, I am offering a used Corona / Plasma treatment system for sale. The material to be treated is placed on a conveyor belt. Sensors automatically activate the plasma / corona discharge when the substrate is positioned beneath the head. The feed speed is adjustable. The conveyor belt has a width of 650 mm. The system is mounted on casters, making it mobile. An exhaust fan is also installed and only the exhaust air needs to be ducted outside. This system is ideal for treating the surfaces of plastic materials or glass to improve printability. It is also suitable for the pretreatment of materials to enhance adhesion for bonding. Bodpfx Akjy A Trlstelp If you have any questions, please feel free to contact me.

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Blsdpfx Aex Eg T Esktsp

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Blsdpfx Akozizkyetop Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) Bodpfxjz A Tx Ts Aktjlp HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Bledozku Rpspfx Aktsp Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: repair required (used), Year of construction: 2005, functionality: unexamined, operating hours: 52,751 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, number of slots in tool magazine: 32, controller manufacturer: BWO, overall weight: 16,600 kg, controller model: CNC 920, continuous operating pressure: 6 bar, nominal power (apparent): 12 kVA, number of spindles: 1, rotational speed (max.): 20,000 rpm, rotational speed (min.): 1,000 rpm, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of the portal including unit and tool changer: approx. 15,000 kg Weight of the control cabinet: approx. 1,600 kg Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 liters/hour (uncompressed) Control system type: BWO CNC 920 Controlled axes + max. travel distances: approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 revolutions per minute, speed range 1,000 - 20,000 revolutions per minute Lubrication: grease lubrication Tool holder: HSK 63 F Tool magazine: chain magazine with 32 positions / 160mm Machine table: 2 clamping stations with 6 support crossbars with clamping / pneumatic clamping devices Workpiece dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° Currently, the machine is not operational. The spindle including the conversion kit must be replaced with newer software (can be requested from Maka). The machine can be inspected in DE94424 Arnstorf by appointment. All information is without guarantee. Sale exclusively to commercial businesses (B2B). Sale only within Europe. Bedov Rlpyspfx Aktslp The buyer organizes and bears the costs for the entire dismantling, collection, loading, and transport. Inspection and collection by arrangement in 94424 Arnstorf (Germany).

Condition: excellent (used), Year of construction: 2008, Max. bar diameter 65 mm Blodpfoin Hkmox Aktsp Max. bar length 3000 mm

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional Bledpfsf Nkv Sjx Aktop N° 1 Infeed roller tracks (ca.) 18,000 mm + (OPTIONAL: Infeeder with chains) Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 ( Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min 2° Rear-pusher, with No. 7 (+1) clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 (Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels (N° 2 roller conveyors) Typ 68/20 and Typ 58/24 + N° 3 tables with motorised belts: 2 x Typ 255/56/2 and 1 x Typ 27/56) Total power Kw 110 ca.

Condition: as good as new (ex-display), functionality: unexamined, power: 37 kW (50.31 HP), Siemens SIMOVERT MASTERDRIVES VC Frequency Converter – 37 kW – 6SE7027-2ED61-Z – PROFIBUS Unused Siemens SIMOVERT MASTERDRIVES Vector Control frequency converter from surplus stock, supplied in its original box. Technical specifications: Manufacturer: Siemens Product range: SIMOVERT MASTERDRIVES VC Part number: 6SE7027-2ED61-Z Rated power: 37 kW Rated output current: 72 A Input voltage: 3-phase 380–480 V AC Input frequency: 50/60 Hz Output voltage: 3-phase 0–480 V AC Output frequency: 0–500 Hz Enclosure: IP20 Option G93: CBP2 PROFIBUS communication module Serial number: T-S91647500040 Revision: C Country of origin: Germany Bjdjzpwb Uspfx Aktelp

Condition: good (used), Year of construction: 2004, functionality: fully functional, input voltage: 400 V, total width: 3,500 mm, total length: 8,000 mm, overall weight: 5,000 kg, input current: 16 A, FOR SALE: WellCut LC3500 CNC Oxy-Fuel Cutting Machine For sale: a Finnish-built WellCut LC3500 gantry oxy-fuel cutting machine, with a 3.5 m rail gauge and a 3,000 mm single-torch cutting width. Heavy-duty LC frame, designed for thick plate and multi-torch oxy-fuel applications. Burny CNC control with four independently switchable torch stations. Extendable, precision-machined rack-and-rail track. Manufactured by Airwell Oy, Sastamala, Finland, ensuring local availability of parts and service expertise. See the machine in operation before purchase; inspections are welcome. MACHINE OVERVIEW The WellCut LC is the heavy-duty model in Airwell’s WellCut series. It features a taller frame than the FL model, which keeps the gantry and electronics further away from the cutting heat. The LC can accommodate several oxy-fuel torch carriages simultaneously, enabling the cutting of multiple identical parts from thick steel plate in a single pass. This makes it suitable for steel service centers, fabrication shops, and heavy-plate manufacturers. The "3500" designation refers to the 3.5 m rail gauge. TECHNICAL SPECIFICATIONS Manufacturer: Airwell Oy, Finland Model: WellCut LC3500 Year of manufacture: [to be confirmed] Cutting process: Oxy-fuel (flame cutting) Rail gauge: 3,500 mm Cutting width, one torch: 3,000 mm Overall machine width: 3,900 mm Machine height: 1,800–2,100 mm Gantry body length: 1,280 mm Rail length / cutting length: [to be confirmed] m Torch stations: 2 (independently switchable) CNC control: Burny Drives: Omron AC servo motors, Alpha gearboxes Drive rail: Precision-machined rail with rack, mounted on a base beam Cutting table / extraction: CONTROL SYSTEM AND DRIVES The machine is operated by a Burny NC control system from Lincoln Electric, an industry-standard controller for oxy-fuel shape cutting. Panel controls for Go To, Reverse, Go, and Stop, plus a jog pad for manual positioning. Per-station Auto / Manual / Off switching for torches 1-2. Electric gas control from the panel, with manual adjustment as a backup. Panel functions for ignition, preheat, pierce time, and speed. Omron AC servo motors and Alpha precision gearboxes drive the gantry along a precision-machined rack. This ensures accurate and repeatable motion along the entire rail length. Blodpfx Ako Af Nndetjp FEATURES AND EQUIPMENT Four torch stations for multi-torch oxy-fuel production. Tall LC frame for cutting hot, heavy plates. Precision-machined rack-and-rail drive track, extendable if longer plates are required. Protective covers over the rail and cable chain. Energy chain for hoses and cables along the rail. Torch height control, collision protection.

Condition: used, Power connection: 20A, frequency: 60Hz, mains voltage: 120VAC, phase: single-phase. An on-site inspection is possible. Bljdpfxsz Da Rlj Aktop

Condition: used, Technical details: cutting thickness max.: 0,5 - 70 mm infeed - automatically: 40 mm control: CNC 2050 table-size: 2x L:1500 x B: 1700 x H: 720 mm burner heads: 2 Stück weight of the machine ca.: 6,7 t Bledpfxju Nwfus Aktjp Autogenous flame cutting machine with table. With corresponding additional equipment, the following processes can be performed: Plasma cutting; Plasma signing; Marking; Graining; Boring. other specifications: 2x tables: -L:1500 x W: 1700 x H: 720mm, supporting surface L: 1500 x W: 1500mm; with suction connection Ø 320 x 60mm Distance control system: -Make ZAC 2100, type 7211-2-100 V02; -size 105 x 165 x 130mm -24 VDC; torch voltage 30 - 300V; protection class IP50 -ignition height 1 - 25mm in steps of 0,2mm -cutting height 1 - 12,5mm in steps of 0,25mm -Cutting height together 0 - 20mm in steps of 0,5mm Height drive: - Linear Drive model, type 2203; 24 VDC 100 - 190 watts; stroke 220mm. Laser generator: -manufacturer Kijellberg, type HiFocus 280i, welding rectifier -Power range 10A / 84V - 280A / 192V; protection voltage IP22; cooling type AF; with 2x cooling connection 1/2". Heat exchanger: -manufacturer Kijellberg, type KWE 360 -working voltage U1 400V / 2,5A; protection type IP22; coolant of Kijellberg mixture; with 2x cooling connection 1/2". *

Condition: used, Year of construction: 2014, operating hours: 2,000 h, functionality: fully functional, sheet thickness (max.): 38 mm, sheet thickness steel (max.): 38 mm, sheet thickness aluminum (max.): 25 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, working length: 3,000 mm, controller manufacturer: Hypertherm, controller model: EDGE Pro, control type: CNC control, sheet thickness stainless steel (max.): 25 mm, Equipment: cooling unit, documentation/manual, We offer this used Ermaksan ER 4000 Plasma Cutting Machine, year of construction 2014. Hypertherm HyPerformance® HPR260XD plasma source and Hypertherm EDGE® Pro CNC control. The table size is 3000x1500mm, and it uses TurboNest® CAD/CAM software. It can cut black steel up to 38mm, stainless steel, and aluminum up to 25mm. If you have any questions or need more information, feel free to send us a message or give us a call. Bjdpfjz Sqpisx Aktelp