Used Plastic Shredder for sale (7,200)

Condition: used, Year of construction: 2018, operating hours: 7,293 h, total height: 9,500 mm, total length: 34,500 mm, total width: 14,550 mm, Production year: 2018 Model: 10HM Drake Operating hours: 7293 h Minimum footprint: 34500mm x 14550mm x 9500mm Electric motor power (Siemens): 550 kW Working shaft width: 1000 mm Configuration: 10 hammers, 3-2-3 arrangement (weight per hammer: 105-117 kg) Capacity: 14 tons/hour Magnetic separator (steel) - 2 units Eddy current separator (non-ferrous metals) Drum screen Itjdpezmul Eofx Ahnjl Spare parts: Flap, 3 sets of hammers, pins, conveyor belts, sensors, 6 screens, gearboxes If you have any questions or require further information, please send a message or contact us by phone.

Year of construction: 1995, condition: used, functionality: fully functional, GETECHA RS 303‑A 60.11 plastic shredder, granulator 11 kW GETECHA RS 303‑A 60.11 type central plastic shredder, granulator with built-in exhaust fan. Manufacturer: GETECHA Itodpfoyf E N Tjx Ahnsl Type: RS 303‑A 60.11 Date of manufacture: 1995.12 Rotor cutting circle diameter: 340 mm​ Cutting width: 300 mm​ Number of rotating knives: 3 pcs Number of fixed knives: 2 pcs​ Cutting chamber opening: 300x440 mm Main motor power: 11 kW​ Speed: cca 300-400 1/min​ Screen opening (standard): 6–8 mm, round​ Average capacity: 200–360 kg/h Feeding height: 1750 mm Overall dimensions (WxLxH): 1500x2000x2170 mm Built-in exhaust fan: Manufacturer: Elektror Karl W. Müller GmbH & Co. Voltage: 230/400 V, 50 Hz, three-phase.​ Power: 3.1 kW​ Speed: 2830 rpm Volume flow: 2760 m³/h

Year of construction: 2000, condition: refurbished (used), SHREDDER FOR PLASTICS ROTOR 800x630mm Itjdpfx Ahsgak Duenel

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Itsdsyu Undepfx Ahnol Delivery time: immediate

Condition: excellent (used), Year of construction: 2006, 103 USED HSM FA 400.2 industrial shredder in very good condition. One of the narrowest models in this class of industrial shredders. In addition to paper, it also shreds plastic cards, CDs, flash drives, and floppy disks. Thanks to its robust construction, the device is characterized by high efficiency and a long service life. The material for shredding is fed from the infeed table using an electrically driven belt conveyor. Continuous operation and reverse buttons. Automatic stop when the waste container is removed or full. Automatic reverse in the event of a paper jam. The standard equipment includes a 460-liter mobile cart and a front shelf. Technical features: hardened, single-piece steel cutting rollers, an extremely powerful and energy-efficient motor designed for long, uninterrupted operation, and thermal protection. TECHNICAL DATA: Number of sheets shredded per pass (70g/m²): 130 Number of sheets shredded per pass (80g/m²): 104 Cutting width: 5.8 mm. Entry width (mm): 428 Motor power: 4000 Isdpfew Axdmex Ahnetl Dimensions (H x L x W): 1650 x 1568 x 1157 WEIGHT (kg): 425

Year of construction: 1989, condition: not inspected (used), Industrial twin-shaft shredder C3 VKF-250 (Industrial twin-shaft shredder C3 VKF-250 from the manufacturer Přerovské strojírny ČR) Technical specifications: • Type: C3 VKF-250 • Manufacturer: Přerovské strojírny • Year of manufacture: 1989 • Drive: 2 x electric motor with gearbox (engine power 22.5 kW) • Power supply: 3 x 400 V • Machine location: Papir-Novak s.r.o. – Czech Republic Machine application: primarily for processing: • plastic waste, • wood, • paper and cardboard, Ijdpfx Ahszt Hmzsnetl • textiles, • cables, • light industrial and recyclable waste. Machine condition: • mechanically complete, • equipped with two electric motors with gearboxes, • control panel (distributor) missing, • functionality has not been verified – the machine has not been tested, • stored in a warehouse for an extended period, • the machine is suitable for reconditioning, commissioning, or as a source of spare parts.

Year of construction: 2026, condition: new, functionality: fully functional, Genox 1,000kg/hr Rigid Plastic Washing Line designed for rigid plastics with a wall thickness ranging from 1~25 mm such as HDPE/PP bottles, containers etc. The system includes pre-shredder, friction washers, float sink separation tank, granulator and drying system for producing clean dry plastic granules along with a central, intelligent HMI control system. This is a standard system we offer but can be tailored to suit specific customer requirements. Individual items from our systems are available for separate purchase and integration into existing customer systems. Please contact us to discuss your project or to set up a site visit. Iodpfx Aez Ai Tvshnstl

Condition: new, Year of construction: 2025, Units available in stock! Power 18.5kW Power supply 380V 50Hz Shredding area size 600x595mm Revolutions 98RPM Length 2085mm Itsdpfsfpa Awsx Ahnol Width 1248mm Height 1495mm Weight 1550kg VVS-600 is the smallest member of our VVS family of shredders. Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable particles which is easier to store, transport and sell. Our VVS-600 provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: The horizontal hydraulic ram: - Assists the rotor by pushing the material to provide maximum working area efficiency. - Is controlled by an algorithm to ensure safety and efficiency - Gimbal-mounted hydraulics provide a high lifetime - Enclosed hydraulics to reduce noise, vibrations and increase safety Drivetrain: - The drivetrain is protected against hits from foreign objects by using a twin-disengagement system which is easily resettable and serviceable. - Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor: - The centrepiece of the rotor is milled from a single block of high-grade steel. - In case of severe damage to the rotor or its shafts due to a foreign object, the latter can be replaced without the need to replace the whole unit – costs saved for the user! - Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. - 4-sided rotatable blades – a single blade will last you 4 times as long. - Counter blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output: - Output volume and particle size is controlled by an interchangeable sieve screen which is adapted based on the material used. - The shredded material can be transported out of the machine by using different types of transporters, including air, belt and screw conveyors. Affordable pricing, proven reliability, easy maintenance, warranty, quick service and parts delivery – these are just a couple of reasons to choose our VVS series of shredders.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,710 mm, total width: 1,270 mm, total height: 1,850 mm, overall weight: 2,300 kg, warranty duration: 12 months, hopper volume: 750 l, rotor diameter: 276 mm, rotational speed (max.): 14 rpm, blade width: 20 mm, power: 15 kW (20.39 HP), rotor width: 800 mm, Genox M800 Twin Shaft Shredder, suitable for shredding various types of materials including plastics, wood, packaging materials, metals (copper, hard drives etc), Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with twin 7.5kW (15kW Total Power) drive motors and oversized, heavy duty reduction gearboxes providing high torque, low speed operation. The shafts can be started and operated independently which reduces on site power requirements and improves performance. Iedpfx Ahez Ai D Uonotl Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total width: 1,225 mm, total height: 1,850 mm, overall weight: 1,470 kg, warranty duration: 12 months, hopper volume: 550 l, rotor diameter: 276 mm, rotational speed (max.): 13 rpm, blade width: 20 mm, power: 7.5 kW (10.20 HP), rotor width: 400 mm, Genox M400 Twin Shaft Shredder, suitable for shredding various types of materials including plastics, wood, packaging materials, metals (copper, hard drives etc), Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with a 7.5kW drive motor and oversized, heavy duty reduction gearbox providing high torque, low speed operation. Iedpez Ai Dzsfx Ahnetl Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 7,000 mm, total width: 3,050 mm, total height: 4,000 mm, overall weight: 32,450 kg, warranty duration: 12 months, hopper volume: 4,000 l, rotor diameter: 750 mm, rotational speed (max.): 12 rpm, rotational speed (min.): 5 rpm, blade width: 75 mm, power: 150 kW (203.94 HP), rotor width: 1,800 mm, Genox X1800 Twin Shaft Shredder, suitable for shredding various types of materials including tyres, metals, plastics, wood, packaging materials, household & construction waste etc. Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with twin 75kW (150kW Total Power) drive motors and oversized, heavy duty reduction gearboxes as standard. Providing high torque, low speed operation. The shafts can be started and operated independently which reduces on site power requirements and improves performance. Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs. Segmented blades with replaceable tips are available as an option. Itjdpoz Ai Erjfx Ahnol

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 17080-010, Single-shaft shredder. Rotor diameter 370 mm. Drive power 37 kW. Iedpfx Ahez Aif Sonetl Suitable for processing all types of materials, including paper, wood, and plastics.

Condition: used, Year of construction: 1991, total length: 1,520 mm, total width: 720 mm, power: 30 kW (40.79 HP), Fully overhauled, lubricated, and ready for operation. Automatic two-shaft hydraulic shredder designed for crushing and disentangling metal chips, plastics, wood, electrical cables, and other materials. It is controlled by a PLC that monitors sensors, manages shaft rotation, and automatically activates the reverse function, if several blockages occur within a short period, the shredder shuts down. In addition, the unit automatically switches off after a set period when operating without load. Technical Highlights: Power 30 kW Max hydraulic pressure: 250 bar Torque: 11,780 Nm 2 crushing shafts with blades Ijdpowk Egwjfx Ahnstl Hydraulic drive with gear transmission (Valmet BB 3150CC) Automatic blade pressure adjustment (disc spring system)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, functionality: fully functional, Cable Granulation Plant GUIDETTI SINCRO MILL 530 + Pre-shredder PMG-H 900 – Immediately Available – As New For sale is a high-quality cable recycling plant from the Italian manufacturer Guidetti, consisting of: • Guidetti Sincro Mill 530 cable granulation plant • Guidetti PMG-H 900 pre-shredder • External filtration unit The system was installed, tested at a customer site, and then professionally dismantled. Due to a project change, the plant is now for sale. Condition: Nearly new (test operation only) Availability: Immediate ex stock – no lead time Price: Significant savings compared to new equipment — Special advantages: • Immediately available – no long lead times as with new machines • Only operated for test purposes – correspondingly minimal wear • Complete system incl. pre-shredder • Proven Guidetti technology — Description: The Sincro Mill 530 is a compact, fully integrated cable granulation plant for processing mixed copper and aluminum cables – without pre-sorting. The system consists of: • Granulator (cutter mill) • Zig-zag separator • Turbo mill for fine grinding • Dry separation table Material purity up to 99% can be achieved. In combination with the PMG-H 900 pre-shredder, the system offers a high-performance recycling line for industrial applications. — Iodsy Ahlyjpfx Ahnjtl Technical Data Sincro Mill 530: • Throughput: 450 – 600 kg/h • Motor power: 53 kW • Dimensions (L x W x H): 3410 x 1515 x 4395 mm • Weight: approx. 2,700 kg • For processing copper and aluminum cables — Technical Data Pre-shredder PMG-H 900: • Power: approx. 38.5 kW • Dimensions (L x W x H): 2110 x 2070 x 2245 mm • Weight: approx. 2,840 kg Suitable for pre-shredding cables, non-ferrous metals, and plastics. — Note: The plant is available at short notice. Subject to prior sale. Inspection by appointment possible.

Condition: new, Year of construction: 2026, functionality: fully functional, /// DESCRIPTION VHZ -ESC drive (E=electronic, S=slip, C=control) is a milestone in drive technology for shredder - energy-efficient, cost-efficient and economic. This drive dispenses with gearbox and fluid coupling, is space-saving in itsdesign and also is extremely low-maintenance and low-noise. Its starting strength even under load is due tointeraction between the high-performance frequency converter and the multi-pole drive motor. The variable speedrange allows to individually parameterize the machine on the particular input material and thus to profit from thehighest efficiency of the drive. One further advantage of the new drive concept is the reliable detection of impurities, that activates an immediateshutdown of the machine. At the same time the rotor is braked, so that it stops quickly to prevent damages asfar as possible. /// TECHNICAL SPECS // Belt Conveyor FB H 500 Centre distance 6500 mm Conveying capacity approx. 0.2 t/hour Ijdpfx Ahoyiym Ionjtl Conveying speed approx. 0.5 m/sec Width of belt 500 mm Motor power 1.5 kW Operation voltage 400 V Frequency 50 Hz // Plastic shredder VHZ 1100 S4 ESC Intake width 1075 mm Rotor diameter 370 mm Number of cutting tools 54 off Dimensions of cutters 40 x 40 mm nominal speed rotor 180 rpm Rotor speed range 100 – 255 rpm Diameter of screen holes 40 mm Driving side Right hand (standard) Motor power 30 kW Operation voltage 400 V Frequency 50 Hz

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 22428, total height: 4,000 mm, total width: 2,500 mm, total length: 13,000 mm, overall weight: 11,000 kg, rotor diameter: 600 mm, rotor width: 1,000 mm, type of input current: AC, opening width: 1,000 mm, rotor length: 1,000 mm, sieve perforation: 8 mm, power: 150 kW (203.94 HP), Herbold SM 600/1000 - S7-2 Recycling Plant, complete – Year of manufacture 1999 – Ready for immediate use For sale is a fully equipped and operational recycling plant based on a Herbold SM 60/100 shredder, manufactured in 1999. This is a complete production line, from the feed hopper to the filled end product. The plant is ready for operation, runs reliably, and can be demonstrated in operation after prior arrangement. Itsdpfjzfxqvjx Ahnol The plant is mounted on a semi-trailer and can be used flexibly at different locations. The integrated 340 kVA generator enables autonomous operation. The plant was specifically designed for the processing of plastic materials and features an enlarged material inlet, which is particularly suitable for feeding in crates and large-volume plastic parts. For export or stationary installation, the plant can be disassembled after prior arrangement. Preparation for container or sea transport is possible. Equipment: Herbold SM 60/100 shredder Year of manufacture 1999 Generator 340 kVA Conveyor system Filling system Dust extraction system Demetallization / metal separator Complete plant, ready for immediate use Condition: Functional and in regular use Good technical condition Extensive spare parts stock included Several spare conveyor belts Conveyor fan Spare motors Set of spare blades Deflector wedge Other wear and spare parts Immediately available upon agreement Advantages: Complete line from a single source Autonomous operation possible through generator Suitable for recycling companies, plastic processors and export If you are interested, please contact us by phone or message. Inspection and demonstration are possible after prior arrangement.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 5,150 mm, total width: 2,210 mm, total height: 2,600 mm, overall weight: 11,400 kg, warranty duration: 12 months, hopper volume: 2,000 l, rotor diameter: 515 mm, rotational speed (max.): 15 rpm, rotational speed (min.): 5 rpm, blade width: 50 mm, power: 90 kW (122.37 HP), rotor width: 1,600 mm, Genox X1600 Twin Shaft Shredder, suitable for shredding various types of materials including tyres, metals, plastics, wood, packaging materials, household & construction waste etc. Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with twin 45kW (90kW Total Power) drive motors and oversized, heavy duty reduction gearboxes as standard. Providing high torque, low speed operation. The shafts can be started and operated independently which reduces on site power requirements and improves performance. Isdpfxez Ai Efs Ahnstl Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs. Segmented blades with replaceable tips are available as an option.

Condition: new, GENERAL INFORMATION The ZIS series single-shaft shredders are characterized by their spacious cutting chambers, which owe their stability to a robust steel-welded construction. The rotor diameter is generously dimensioned at 457 mm. Rotor widths are available in 1200, 1500, and 2000 mm. The ZIS series retains all benefits of the ZSS series: drive via an oversized gearbox, reversible blades, bolted blade holders, durable externally mounted bearings, hydraulic screen cradle, easy handling, and technically advanced control systems. APPLICATIONS Ijdpfxsyr I I Ss Ahnstl The ZIS series was primarily developed for large-volume hollow bodies such as IBCs, waste bins, pallets, rain barrels, etc. Additionally, the machine can be universally used for countless applications in the plastics and wood industries. Like all Zerma shredders, machines of the ZIS series can also be equipped with various wear protection options. ADVANTAGES 35% larger cutting chamber volume compared to the ZSS series Internally positioned hydraulic ram Increased ram speed in the return stroke Compact dimensions Blade holders bolted into rotor pockets

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working cross section: 800 x 820 mm ZHS 1100 - 37 kW Rotor diameter: 400 mm Working cross section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working cross section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working cross section: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 1,920 x 1,550 mm Iodpfxjyr I Irs Ahnotl ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 2,480 x 1,550 mm ZHS – economical all-rounders The ZHS series features a load-dependent, hydraulically actuated pusher that feeds material horizontally to the rotor in a slightly inclined position. The material is cut between the rotor and stator blades until it passes through the screen, which is bolted and mounted underneath the rotor. The interchangeable screen determines the final particle size. The shredded material can be discharged via conveyor belt, discharge screw, or pneumatically using an extraction system. The ZHS single-shaft shredders are designed for light to medium-duty applications in the plastics industry. Technical details: • Roller-mounted hydraulic pusher with horizontal movement • Bolted knives and knife holders • Optional segmented floor for particularly thin parts and materials • Rotor aggressiveness can be reduced or increased by bolting in filling pieces • Can be integrated in a two-stage system with a granulator as a pre-shredder

Condition: new, Year of construction: 2026, operating hours: 5 h, Equipment: AdBlue, Arjes Impaktor 250 EVO II Shredder – Ideal for construction debris, concrete, bulky materials, asphalt, roofing felt, wood, mixed waste, biomass, rubber, plastic, ceramics, photovoltaic panels, and other materials. The basic machine price includes (already contained): - Complete shaft set with bearing cassette of choice (for concrete, wood, biomass, mixed waste, others) - Sprinklers for dust reduction - Cross-belt permanent magnet (separates steel elements to the side) - Side discharge hopper under the magnet - Shaping bars Itsdpfx Aoyf Ni Djhnel

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,860 h, functionality: fully functional, machine/vehicle number: 3155220747, overall weight: 458 kg, rotor diameter: 300 mm, number of blades: 5, total length: 1,130 mm, total height: 1,570 mm, total width: 1,000 mm, power: 6.1 kW (8.29 HP), type of input current: three-phase, input voltage: 380 V, blade width: 300 mm, Equipment: documentation/manual, The compact SINCRO 315 EKO granulator is designed for recycling rigid and flexible cables. By shredding and subsequently dry-separating the material, it effectively separates copper and aluminum from insulation (such as plastic, rubber, or paper). The machine can be fed either manually or automatically by adding a conveyor belt, according to user requirements. The SINCRO 315 EKO cable shredder is fully soundproofed and consists of the following components: - Granulator with three rotary and two fixed adjustable knives, as well as a screen perfectly matched to the granulator. - Control panel with an intuitive arrangement of control buttons. - Adjustable, easily accessible vibratory dry separator. - Two completely independent air circuits, which reduce maintenance needs and enhance the sorting process. Performance: - Up to 130 kg of input material per hour, depending on the type and size of the processed material and screen. - Combining it with a PMG pre-shredder increases throughput and reduces component wear, as ferrous parts are separated using a magnet installed on the conveyor, also reducing labor requirements. Processes unshredded cables: - Flexible copper cables up to Ø22–25 mm - Rigid copper cables up to Ø20–22 mm - Aluminum cables up to Ø20–25 mm Your benefits: - Best price/performance ratio - Quick return on investment - Machine retains high resale value - Compact, ideal solution for limited spaces - Environmentally friendly with low energy consumption and low noise - Capable of recycling a wide range of materials Isdpfsy Sh Dbjx Ahnetl - Easy operation and maintenance

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor width: 1,500 mm, power: 110 kW (149.56 HP), rotational speed (max.): 80 rpm, Genox K1500 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 110kW Drive motor (90kW & 150kW dual drive options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard. 1500mm wide x 480mm diameter Rotor with 88pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic, fast acting swing type ram force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Iedez Ai Iyepfx Ahnjtl Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor width: 2,000 mm, power: 150 kW (203.94 HP), rotational speed (max.): 80 rpm, Genox K2000 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. Itodpfxez Ai Rze Ahnsl Twin 75kW drive motors (2 x 55kW & 2 x 110kW dual drive options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard. 2000mm wide x 480mm diameter Rotor with 95pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic, fast acting swing type ram force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 400 mm, number of blades: 45, rotor length: 1,000 mm, power: 45 kW (61.18 HP), rotational speed (max.): 80 rpm, Genox V1000 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. Ijdpfx Ajz Ai H Njhnstl 45kW Drive Motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. 1000mm wide x 400mm diameter Rotor with 45pcs 40mm Concave reversible alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft.

Condition: new, Year of construction: 2025, overall weight: 1,50,000 kg, We offer Lines for shredding and separating non-ferrous metals and copper cables. The line can be freely modified according to the customer's needs. The attached visualization is illustrative. Iodpfxov I Shdo Ahnotl Machines included in the line: Drum Belt Magnetic Separator Multi-shaft shredder 2 x 18.5 kW MCW-110 1. Loading conveyor (controlled automatically by shredder, according to load) Technical data: - L – 4000mm -Working width – 720mm - Height – 2100mm - Geared motor – 1.5kW - PVC conveyor belt equipped with straight cleats. - Steel structure, placed on self-adjusting wheels 2. Unloading conveyor (receives the shredded material for further process) Technical data: -L. – 3600mm - Working width - 400mm - H – 2000mm - Geared motor – 1.1kW - PVC conveyor belt equipped with a sealing wave and straight cleats - Structure made of acid-resistant steel, placed on self-casting wheels 3. Magnetic separator – (automatically separates unwanted steel elements from the belt of the unloading conveyor) Technical date: - L – 1400mm - Working width – 380mm - Height – 300mm - Geared motor – 0.55kW - Structure made of acid-resistant steel - PVC conveyor belt equipped with straight cleats - Magnetic plate made of permanent magnets 4. Magnetic plate with quick-cleaning overlay – (separates very small steel elements) Technical date: - W – 490mm - L – 330mm -H- 80mm - Housing made of acid-resistant steel Vibrating feeder PWR-1000 Eddy Current Separator WPS-1000 Discharge conveyor no. 2 of the WPS-1000 separator . Horizontal shredder RKZ-1200 Dust extraction DUST EATER OPW-400 GoldRiver SWZ-700 Water Separator Automatic plastic receiver Automatic metal vibration receiver.