Used Plate Cleaner for sale (14,877)

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, Itedpfx Aaetnlz Hoben -T-slot plate: clamping plate with T-slots for hydraulic press, eccentric press -Clamping surface: 705 x 484 mm -Inner diameter: 250/220 mm -Plate height: 65 mm -Groove width: 22 mm -Dimensions: see drawing in the photos -Dimensions total: 705/484/H65 mm -Weight: 147 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, We offer for sale an Industrial Liquid Vacuum Cleaner Karcher IVL 50/24-2. This vacuum cleaner is designed for suction of coolant fluids and lubricating liquids, as well as recirculating them back into a closed system after separation from solid components. The IVL 50/24-2 is equipped with two turbines, a 50-liter liquid tank, and a smaller tank for solid particles. Condition: Very good Year of manufacture: 2014 The machine is in very good condition—both visually and technically. It has undergone a comprehensive and detailed overhaul, making it fully operational and ready for immediate use. All machines we offer are shown in authentic photos—you buy exactly the machine you see in the pictures. A 12-month WARRANTY is provided for all equipment purchased from us. Equipment included: Complete liquid suction kit (suction hose, suction tubes, wide nozzle) Technical data: Iedsw Igxhepfx Aabjtn • Supply voltage (V): 220-240 • Power frequency (Hz): 50-60 • Airflow (l/s): 2 x 56 • Nominal diameter (mm): 51 • Vacuum (mbar/kPa): 235 / 23.5 • Liquid tank capacity (l): 50 • Solid particle tank capacity (l): 38

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate Itedjwypp Iopfx Aabon - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: used, functionality: fully functional, Year of construction: 1985, Hydraulic Guillotine Shear Make: FASTI Model: TCHE 20/10 Year: 1985 Technical Data Brand: Fasti Model: TCHE 20/10 Year of manufacture: 1985 Sheet capacity: 2000 x 10 mm Dimensions: approx. L 2.60 x W 2.20 (plus support arms) x H 1.60 m Weight: approx. 5 t Equipment • Motorized backgauge 1000 mm with digital readout Iodpfx Aasxmguljbstn • Angle gauge • Support arms • Cut length limiter • Manual blade gap adjustment • Pneumatic hold-up device • 1 x spare blade set All information subject to change. A demonstration is possible at any time in our exhibition hall.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, Sahinler round bending machine type IRM 2050x110 Itedpfx Aoxnc N Uoabon working width 2050 mm max sheet thickness 3.0 mm roller diameter 110 mm motor driven

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, working width: 1,080 mm, area performance: 7,560 m²/h, overall weight: 1,385 kg, warranty duration: 12 months, water tank capacity: 260 l, HAKO SCRUBMASTER B260 R WB1080 SCRUBBER NEW HAWKER PERFECT PLUS 36V 480Ah TRACTION BATTERY (6PZS480) NEW NEOS 36V 50A CHARGER 2020 production year 1080mm cleaning head (WB1080) equipped with two new medium hardness cylindrical brushes, enabling work on any surface. New rubber squeegees made of high-quality natural rubber New protective rubbers around the brush head prevent water from splashing outside the machine's outline The device is equipped with a new durable drain hose and a new suction hose The new suction turbine ensures high water suction power from the squeegees Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 36 V Working width of brushes (mm): 1080 Suction width (mm): 1290 Theoretical efficiency (m²/h): 7560 Tank capacity clean/dirty water (l): 260/260 Number of brushes (pcs): 2 Brush revolutions (rpm): 640 Working speed (km/h): 7 Total weight, ready to work (kg): 1385 DIMENSIONS: Length with squeegee (mm) 2020 Height (mm) 1490 Width with squeegee (mm) 1290 Width without squeegee (mm) 1210 INCLUDED: NEW TRACTION BATTERY HAWKER PERFECT PLUS 36V 480Ah (6PZS480) NEW NEOS 36V 50A RECTIFIER NEW cylindrical brushes 1080mm (x2) NEW suction turbine 36V 700W NEW drain hose NEW suction hose NEW head protection rubbers (x2) Suction bar with new rubbers Tenzi Normal 5L fluid - FREE KEY FEATURES: A 260-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Itedpswtdp Aofx Aabjn Thanks to its design, the machine is very manoeuvrable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (1080mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: good (used), Year of construction: 1969, Hämmerle guillotine shear type AS 10, 4000x10 mm Itodexmkf Uopfx Aaben

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Machine dealer with own stock of 1600 m². Itedpfxotq I Rqe Aabon

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 16 mm, cutting length (max.): 6,000 mm, HYDRAULIC SHEAR LVD MVSB 62/16 Serial number 18478 Yom 06/1991 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 6200mm Distance between uprights 6400mm Gap 60mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.5° Min. number of strokes/min. 6 Max. number of strokes/min 25 Min. blade clearance 0.05 mm Max. blade clearance 1.6mm Motor power 30kW Approx weight 35000 Kg LxWxH 7100x2400x3000mm Accessories included; ELGO P85 “GO-TO” for back gauge Electrical adjustment of back gauge 1000mm 1 x Front support 2mtr, one with 90° square arm front support L2000mm Foot pedal Iedpfsumhm Aex Aabstn Ball bearings on table Inclinable back gauge with manual hydraulic pump

Condition: good (used), functionality: fully functional, Year of construction: 2011, Motorized Guillotine Shear Make: GEKA Type: ETS 3000x1.5 mm Year: 2011 Technical Data Manufacturer: GEKA Model: 3000 x 1.5 Year of manufacture: 2011 Working length: 3,030 mm Sheet thickness: 1.5 mm (St37) Motor power: 3 kW Weight: approx. 4 t Dimensions (L x W x H): 3.90 x 2.50 x 1.70 m Equipment • Angle stop • Motorized backgauge • Elgo P40 control • Electric sheet support device Iedpfx Asxl Twdsabetn • Extendable table extension • Continuous hold-down bar • Cutting area illumination • Rear safety cage • Front drop sheet chute • Foot switch • Documentation All information subject to change and without guarantee. A demonstration in our showroom is possible at any time.

Year of construction: 2008, condition: excellent (used), Plate heat exchanger APV H17 7.41 4.8nm2 800kw APV H17 MGJ plate heat exchanger /ct2227/ Manufacturer: APV Type: H17 MGJ 10.1 Year of manufacture: 2008 Heat transfer surface: 4.08nm3 Nominal power: 800kw Width: 340mm Height: 1050mm Connection height: 137mm Itjdpjwx Hz Sofx Aabsn Depth: 60cm Pipe connection DN50,EN 1092 Capacity: Primary: 7.41Liter Secondary: 6.86 Max pressure: 10bar Test pressure 15.53 bar Max temperature: 110 °C Stainless steel pipe connections.

Year of construction: 2018, condition: used, Serial number: 1302xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19196 Description: Ammann 538 kg vibrating plate for sale. It has stood for less than a year since it was new and not used at all. Everything must work as it should Ready for delivery. Itsdpfx Aovgzv Isabon

Condition: good (used), Year of construction: 2008, Machine no.: B0623A0001, cutting length 6,050 mm, cutting thickness 4 mm, back gauge 1,000 mm, net weight 20,900 kg, 15 kW, control system, manufacturer Elgo Electric, model P8721, 7 supports Itodsxl Du Topfx Aabsn

Condition: good (used), Code: 0026 Brand: GNT - ITALY Model: S 1300/2 Automatic cleaning machine for top and bottom surface cleaning of melamine covered panels, laminate, pvc, etc. Composition: Steel base Top and bottom cleaning unit composed of : dusting brush of special wire for dust elimination, wiping blade for residue cleaning, humidifyng group with one rubber and one milled metal roll, two brushes for finishing - reservoir for the cleasing liquid, recirculation pump made of stainless material Independent brush and felt rolls control to get back wearing down Motorvariator with continuous adjustment for advancement Motorvariator with continuous adjustment for humidifyng unit Brushes to clean the finishing felt rollers Isdpfjvw Uf Dsx Aabotn Residue collection tanks Emergency device to check thickness Technical data Working width mm 1300 Working height mm 6/80 Feed speed from 5 to 20 mt/min Working height mm 800 N° 3 dust hoods mm 150 Installed power: Motorvariator for advancement Kw 0,37 - Motorvariator for humidifying group rollers each Kw 0,37 - Brush motor 1 Kw 0,75 - Absorbed power consumption Kw 17 Overall dimensions mm 2600 x 2280 x 1360 h Weight kg 2250

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Motor power 22 kW Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Iodpfouipu Eex Aabstn Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Main Drive Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Main Drive Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine. Application Types Itedpsxd Ib Iofx Aabjn Rolling

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment Isdpfx Aaexmakgebotn - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20721 Specifications: S70 mount, but a little wider For excavator Works as it should Weight: 645 kg 172 Bar Itsdpfewrl T Tex Aabon Ready for delivery

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: with support ribs, on a solid base frame -Clamping surface: 800 x 800 mm -Table height: 930 mm -Plate thickness: 25 mm Itedpfx Aowclcioabsn -Transport dimensions: 800/800/H930 mm -Weight: 235 kg

Year of construction: 2000, condition: used, Della Toffola NF5 mobile kieselgur plate filter 5 m², Aisi 304 - condition: used - location: Bremen Itedpfxet Ebize Aabsn - total height: 1.890 mm - total length: 1.200 mm - total width: 2.100 mm - remarks: - Working pressure: +6 Bar; - material in contact w/ medium: Aisi 304; - filter medium: diatoms; 240 l tank with agitator for preparing the diatoms; - agitator arranged eccentrically in the upper bottom; - Agitator element: anchor agitator; - mobile frame on rollers with brake; - Weight: 510 KG

Condition: new, Year of construction: 2025, Schnittbereich quadratisch (B x H): 2600 x 100 mm Kürzeste Länge des abgeschnittenen Stücks : 1100 x 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 40 mm Electrical connected load: 34 kW Leistung des Sägemotors: 18,5 kW Leistung hydraulischer Motor: 7,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20-100 rpm Saw feed speed: 1-700 mm / min Höhe der Materialauflage: 720 mm Sägeblattdurchmesser: 425 mm Sägeblattbohrung: 50 mm Sägeblattdicke: 2,7 mm Length: 12000 mm Breite inkl. Späneförderer : 6300 mm Iedexlcaujpfx Aabetn Height: 3000 mm Weight of machine approx.: 28000 kg Standard configuration Variable blade speed controlled by inverterPrecision feed pressure & feed rate dual valve systemServo feeding motor with precision ball screwCombined guides with bearingsOil mist cooling de anti-vibration deviceP.L.C. control for all electric and hydraulic raulic pump with three-phase motorTwo sets of horizontal and vertical clamping devicesAdjustment baseRoller table

Condition: good (used), functionality: fully functional, Asymmetric 3-roll bending machine Plate roll-flanging machine BOMBLED - Model: 317 S Year: 1971 Maximum rolling thickness: 4 mm Maximum working length: 2050 mm Maximum flanging thickness: 3 mm Ijdpexn Tgwsfx Aabotn Roll diameter: 153 mm Control: motorized Motor: 3 kW / 4 HP Approximate weight: 2100 kg Dimensions: 3100x1100x1400 mm

Condition: used, mileage: 4,05,000 km, Year of construction: 2006, Serial number: YS2R6X2000201xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21128 Specifications: 2012 model Km: approx. 405,000 6x2 Euro 3 Axle distance: 350/132 cm Snowplow mount Itjdpfx Aaew Raf Hobjn Engine brake Suspension: steel Underslung blade Box (see pictures) Tires (see pictures) New heater radiator New engine hoses VBG tow hitch AC/climate Radio/DAB Ready for delivery Description:2006 Scania R500 6x2 tipper truck with snowplow setup, including mount and underslung blade.The owner has a custom start button installed by Scania; sometimes the key won’t turn.The start button works every time.See video.Ready for delivery. Km: 405000 HK: 500 Technical approved: Yes EU-approved until: 09.06.2026 Own weight: 12810 Total Weight: 29000 Payload: 16115 Width: 255 Length: 740 Euro: 3 Model: R500 6x2 brøyterigget tippbil

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a WOTAN drilling machine -compatible with: Linear actuator ID 22786 -Travel: 1110 mm -Clamping plate: 1000 x 1260 mm (rotatable) -Plate is: Solid -Groove width: 21 mm Iodpfed E Hk Hsx Aabjtn -Dimensions: 2470/1070/H885 mm -Weight: 2200 kg

Condition: used, Padovan Green Filter 18 m² mobile Kieselgur stainless steel plate filter, Aisi 304 - condition: used - location: Bremen - total height: 2.950 mm - total length: 2.250 mm - total width: 1.500 mm Ijdpot Eb Azsfx Aabstn remarks: - Filter medium: diatoms; - tank with agitator for the preparation of diatoms; - Underbody opening diameter: approx. 400 mm;