Used Plate Developing Machine for sale (71,416)

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm Pgjdpewk Rlxsfx Abpsr weight: 240kg

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts Pjdozwuu Uopfx Abpegr 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original

Condition: used, Hard stone plate, granite plate, granite block, measuring cube Hard stone block, angle block, precisely machined on all sides The granite plate comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W x H: 1350 x 300 x 245 mm Working height approx. 700 mm - 5 support blocks with leveling screws, approx. 400 mm Psdpfx Aoh Uhq Djbpjgr - 8 threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushings M16 - small chip on one plate edge Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of the measuring plate: 1500 kg Weight of the granite feet: 100 kg Very good condition

Condition: used, 3-D coordinate measuring machine ZEISS NUMEREX - non-functional Granite measuring table, granite measuring plate, measuring table Model No. 3648-18, Serial No. X-1019, Year of manufacture approx. 1986 Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate L x W 1525 x 1435 mm Usable area 1525 x 1100 mm Measuring plate thickness 305 mm Passage width in the portal 1100 mm Measuring probe mount Ø 9.5 mm Compressed air connection 6 bar Mains connection 230 Volt, 50 Hz - Granite plate with steel inserts with internal thread Pjdpofy U Ewjfx Abpogr - Axis adjustment with pneumatic sliding guide for X, Y and Z axis - Plate on substructure with 5 adjustable feet, 3 support plates for the adjustable feet - Computer and software missing (not included and not part of the scope of delivery) → non-functional! Space requirement of the measuring machine L x W x H 1600 x 1850 x 2200 mm Weight of the machine approx. 2.8 tons Plate damaged on one side, see picture, otherwise in good condition.

Condition: used, Year of construction: 2007, total length: 5,810 mm, total width: 1,980 mm, total height: 1,540 mm, Colour: Blue Empty weight: 11.500 kg Price: On request - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 600007090 - Drive system: Conventional - Drive: Hydraulic Podpezw A Sujfx Abpogr - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 15.0 - Max. sheet thickness [mm]: 13 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 280 - Bottom roll diameter [mm]: 280 - Bending speed [mm/min]: 5000 - Options: Cone rolling, Digital readout - Transport dimensions: 5815mm x 1985mm x 1540mm (l x w x h) - Transport weight [kg]: 11500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Psdpfx Aboibq Itspjgr Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm plate thickness: 16 mm Pedpfoyh D Nnsx Abpegr pre-bending: 12 distance between columns: 5200 mm roll dia. top roll: 330 mm roll dia. bottom roll: 360 mm Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine approx.LxWxH: 5,3 x 2,4 x 2,0 m

Condition: new, functionality: fully functional, Year of construction: 2026, A STURDY GIANT FOR THE PRODUCTION OF NATURAL GAS PIPELINES Exclusive Features: • Max Pipe Length: 12.000 mm • Max Bending thickness (mild Steel): 12.000 x 28mm • 3 rolls with Variable Axis configuration Podpfx Absgurb Hopegr • Anti-deflection System for Top roll • Anti-deflection System for Bottom Rolls • 3 rolls drive • Automatic Pipe Ejection System Capacities for Material Yield 360Mpa 12.000 x 17mm a D= 1500mm 12.000 x 15mm a D= 550mm 6.000 x 22mm a D= 1500mm 6.000 x 19mm a D= 550mm Possibility of adding interchangeable top rolls to reach Higher thickness capacities up to more than 12000x23mm or Smaller Diameters down to 400mm. Available immediately from the factory!

Condition: good (used), Year of construction: 1983, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Pgedpfozwlz Eox Abpsr Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, feed length W-axis: 1,600 mm, x-travel 11,500 mm y-travel 4,500 mm Pedpfx Abszwly Ujpogr w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: excellent (used), Year of construction: 1974, travel distance X-axis: 4,600 mm, travel distance Y-axis: 3,000 mm, feed length W-axis: 2,000 mm, spindle diameter: 160 mm, table load: 25,000 kg, CNC boring and milling machine – Scharmann Manufacturer: Scharmann Model: WFT 160 (early 1970s) Control system: Bosch CC300 Work table: 2000 x 2500 mm Pedpszvw Ihofx Abpogr Longitudinal travel of the table: 4600 mm Transverse travel of the table: 2000 mm Vertical travel of the spindle: 3000 mm Maximum table load: 25 tons

Condition: used, Year of construction: 2001, sheet width 1650 mm plate thickness 0,5- 3 mm number of rolls 21 straightening feed 0- 60 m/min straightening roll diameter 50 mm adjustment 30 mm weight of the machine ca. 24,5 t dimensions of the machine ca. 4,5x 2 x 2,8 m voltage 400 V passage width 1720 mm Pgodpozafi Njfx Abper number of support rolls 18 main drive motor 45 kW run-in height 1250 mm 6 HI High-performance straightening machine with 21 rolls for fine straightening work of steel or non-ferrous metals. Machine has 23 intermediate rolls and 18 support points. Working rolls are adjustable with DRO in 0,01 mm. Main Gearbox was renewed in 2021.

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Psdpfsd Eqg Hjx Abpogr Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 5-axis machining center with traversing table, model MFS, equipped with an 840D Siemens control system. Pgsdpfey Rgt Esx Abpsr Travel ranges: 13200 x 3000 x 1200 Spindle: SK50, motor with a rated power of 15 kW. Maximum spindle speed: 2500 rpm.

Condition: ready for operation (used), 1 x Davi round edge rolling machine / plate rolling machine / iron four-roll bending machine / 4-roll machine (English: Davi 4-roller bending machine) 4 rolls, 3.6 m x 95 mm thick. Video available via WhatsApp/Messenger/Viber. Inspection welcome near D-24983 Handewitt. Year of manufacture 2009 - in operation since 2010. More information available upon request. Pgodpfxsymnzbs Abpsr

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm total power requirement 3 kW weight of the machine ca. 2 t Psdpfx Aboztfxijpsgr

Condition: used, Year of construction: 2003, total length: 3,230 mm, total width: 1,150 mm, total height: 1,120 mm, Colour: Grey Empty weight: 1.400 kg Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 220281 Pgjdozry N Hopfx Abpjr - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 2.2 - Max. sheet thickness [mm]: 2 - Max. prebending thickness [mm]: 2 - Max. working width [mm]: 2050 - Top roll diameter [mm]: 110 - Bottom roll diameter [mm]: 110 - Bending speed [mm/min]: 3 - Transport dimensions: 3230mm x 1150mm x 1120mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, side roll diameter: 90 mm, sheet thickness steel (max.): 3 mm, number of digital displays: 1, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, - Capacity: 1070 x 3 mm - Roller diameter: 90 mm - Electrically adjustable follower roller - Digital display - Hardened rollers - Option for conical rolling - Rotatable top roller - Brake motor - Foot control - Emergency stop - Documentation Pgjdpfxsi E Tzqo Abpsr - 400V

Condition: new, Year of construction: 2026, roller (bottom) diameter: 70 mm, roller (top) diameter: 70 mm, side roll diameter: 70 mm, roller length: 1,050 mm, number of digital displays: 1, Equipment: cone bending device, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1050 x 1.8 mm – Bending capacity 1050 x 1.5 mm – Roll diameter 70 mm – Electrically adjustable rear roll – Digital display – Hardened rolls – Conical rolling – Swing-out upper roll – Brake motor – Foot control – Emergency stop – Documentation – 400V Pgjdpfx Absyp E Sisper

Condition: new, Year of construction: 2026, roller (bottom) diameter: 70 mm, roller (top) diameter: 70 mm, side roll diameter: 70 mm, roller length: 1,050 mm, – Capacity 1050 × 1.8 mm – Bending capacity 1050 × 1.5 mm – Roll diameter 70 mm – Minimum bending diameter 105 mm Pgedpfx Abeyrn Ixsper – Conical rolling – Swing-out upper roll – Brake motor – Foot control – Emergency stop – Documentation – 400V

Condition: used, Year of construction: 2008, Product Information "Nosstec Round Bending Machine" 4-Roll Round Bending Machine with crowning Type / Model Nossebro Luna 8268 30/20 Condition Used Year of Manufacture 2008 Technical Data Maximum working length 3,040 mm Max. sheet thickness (400N/7mm2)(t) 2.0 mm Number of rolls 4-roll system (arranged asymmetrically/symmetrically) Driven rolls All 4 rolls individually driven Roll diameter (top roll) 140 mm Motor power 2.2 kW Power connection 400 V / 3-phase Control voltage 24 V Equipment: CNC control Mylock 100 Features - CNC control with the capacity to store 200 programs in internal memory and virtually unlimited programs by attaching an external USB flash drive - Pre-bending and final bending in one cycle - The pre-bending value is approximately 70% of the specified material. - All four rolls are driven - Crowned rolls - Programmable axis - Designed for highest accuracy Pgedpfxjzp Ip Aj Abpor - Adjustable crowning of the lower roll - Program backup via external computer or connected USB stick Inquiry item: Transport costs in an individual offer.

Condition: good (used), Code: 0462 Brand: SERRMAC Model: V 22 - CE Standard Pgjdpfx Aezp Exzsbpjr Pillar drill with swivel table for machine shops, workshops, carpentry shops, and other applications - CE Standard Technical data: Sturdy construction Drilling capacity in steel diameter 22 mm Spindle taper cm2 Spindle stroke 90 mm Column diameter 98 mm Distance from column to spindle center 201 mm Table 350 x 250 mm Spindle speed 255/380/420/560/630/660/950/990/1090/2380/2590/3850 rpm Motor power 0,55 Kw Overall dimensions mm 400 x 750 x 1700 h Weight kg 170

Condition: new, Year of construction: 2023, neu Pjdpfswira Uex Abpjgr 2023 9656 prompt, Zwischenverkauf v Türkei 2600 € 1 1 1050 mm 1 mm 56 mm 1400 mm 700 mm 1120 mm 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4900 € 109.71 € 1050 mm 3 mm 2 mm 90 mm 2080 mm 700 mm 1250 mm 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN Pgjdpfx Ajwirv Nsbpsr

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, *Description:* For sale: motorized 3-roller rolling machine *SAY-MAK SRM 1550 x 90* Pgsdpfx Aszr Rdusbper *Technical specifications:* - *Year*: 2019 - Serial number: 59860 - *Capacity*: 2mm steel / 1.5mm stainless steel, with a width of 1550mm - *Minimum diameter*: 90mm - *Motorized*: Yes, with forward/reverse foot pedal - *Controls*: Control box with emergency stop + digital display - *Weight*: 580kg - *Voltage*: 380V, three-phase - *Condition*: Very good condition, well-maintained 2019 machine Perfect machine for sheet metal work, ventilation, and metal fabrication. Reputable Turkish brand, spare parts available.