Used Plate Punch for sale (13,926)

Condition: used, tank capacity: 6,050 l, GENERAL Equipment: Crane lugs Design: Rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet reinforced (see photos) Overall width: 1,070 mm Overall height: 2,550 mm Overall length: 3,250 mm Heating/Cooling: available Location: Bremen Volume: 6,050 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last intended use: wine storage TANK Support type: feet Number of feet: 4 pieces HEATING/COOLING JACKET Internal temperature control: Cooling plate EQUIPMENT Kedpfx Aoyckt Sedwewt Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material (temperature control system): V2A 1.4301 (AISI304) Feet material: Stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 Kwedpsyckt Eofx Adwot HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Kjdpfsycktrjx Adwswt Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine Kedsya U Twspfx Adwewt - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Kwjdpfxek S Htxo Adwst Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: good (used), Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2280/1060/40 mm -Table height: 960 mm -with supporting ribs Kwjdpfx Asb A Nbnjdwjt -Cast iron plate -Weight: 1050 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, Control: Trumpf Sinumerik 840 D Kodpfxeycia Ds Adwewt Working area: 3000 x 1650 mm Max. sheet thickness: 8 mm Max. punching force: 220 kN Active hold-down force: 4.5 – 20 kN Max. workpiece weight: 200 kg Speeds: X-axis: 100 m/min Y-axis: 60 m/min C-axis: 330 rpm Simultaneous X-Y: 116 m/min Punching stroke rate: 1000 1/min Marking stroke rate: approx. 2800 1/min Linear magazine: 21 tools with 4 clamps With light barrier, no further accessories! No tools included! FREE LOADED onto truck!

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, machine/vehicle number: 173, punching force: 30 t, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, feed rate X-axis: 100 m/min, controller model: AMNC-F (FANUC 180i-PB), No minimum price – guaranteed sale to the highest bidder! Auction of an AMADA EMZ-3610 NTZ including LKI MP SheetCat 3015 manipulator! Bidding obligates timely collection between 23.03.2026 and 27.03.2026! AMADA EMZ-3610 NTZ TECHNICAL DETAILS Punching force: 300 kN Turret capacity: 45 stations Max. material size: 1,525 × 5,000 mm Max. material thickness (mild steel): 4.5 mm Max. material weight (F1): 50 kg Max. material weight (F4): 150 kg Travel range X-axis: 2,500 mm Travel range Y-axis: 1,525 mm Feed speed X-axis: max. 100 m/min Y-axis: max. 80 m/min Strokes per minute 1 mm pitch (5 mm stroke): 780 rpm 25.4 mm pitch (5 mm stroke, X-axis): 500 rpm 25.4 mm pitch (5 mm stroke, Y-axis): 330 rpm Kwjdpfx Aeycqm Sjdwet Max. stroke length: 37 mm Turret indexing speed: 30 rpm Positioning deviation: 0.07 mm MACHINE DETAILS Connected load: 27 kVA Compressed air requirements Base machine functions & air blow: 250 l/min POWER VACUUM (EMK) / AIR JET VACUUM (EMZ): 250 l/min Operating pressure: 5 bar Control unit Controller: AMNC-F (FANUC 180i-PB) Controlled axes: 4 axes (X, Y, T, C) + A-axis Programming: metric or inch Dimensions & Weight Approx. dimensions (L x W x H): 5,422 x 5,120 x 3,241 mm Height without leveling elements: 2,317 mm Height with mirror: 3,241 mm Machine weight: approx. 24.5 t LKI MP SheetCat 3015 TECHNICAL DETAILS Max. sheet size: 3,050 × 1,525 mm Min. sheet size: 1,000 × 300 mm Sheet thickness: 0.5–6.0 mm Max. sheet weight: 300 kg Max. load per pallet: 3,000 kg Max. pallet stack height: 300 mm Max. load, stacking table: 4,000 kg Cycle time (continuous production): approx. 37 s Max. movement speed loading unit: 60 m/min Max. movement speed unloading unit: 30 m/min MACHINE DETAILS PLC: Mitsubishi Q-Series Operating terminal: Beijers E1032 Dimensions & Weight Approx. dimensions: 5,775 x 3,775 x 3,100 mm Approx. weight: 4,100 kg Max. compressed air requirement: 750 l/min EQUIPMENT 2x chip trolleys, Bauer EXPO 150, year: 2023 34 vacuum suction cups 3 separation magnets/pallets Double sheet detection with thickness measurement Note: Control parameters are missing.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, total height: 890 mm, total width: 630 mm, total length: 1,000 mm, overall weight: 190 kg, Granite measuring table / surface plate by Planolith in very good condition. 1000 x 630 x 890 mm (L/W/H) Kwodpfx Adjya Dhqewet

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Kwedpfjww E Nrjx Adwet Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: ready for operation (used), Year of construction: 2012, punching force: 18 t, total height: 2,252 mm, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, controller manufacturer: BOSCH, controller model: MTX CMP70, product length (max.): 6,500 mm, General Data Measurements height 2252 mm Control Unit Brand BOSCH Model MTX CMP70 Dimensions Machine Length 6500 mm Movement X-Axis Movement 2500 mm Y-Axis Movement 1250 mm Main Drive Punching force 180 Kn Maximum sheet thickness 6.4 mm This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine. Application Types Punching Kwsdex D Dklspfx Adwjt

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Scope of delivery includes: 01x Locking bracket, used Material color: Sendzimir galvanized Leg "A": approx. 35 mm Leg "B": approx. 53 mm (support surface, see description) Incl. spacer block (grey) Internal dimension "C": approx. 22 mm Material thickness: approx. 2.00 mm Weight per piece: approx. 0.120 kg Note: Thanks to the included spacer block, the Z-bracket can be used for various beam widths from 40 to 60 mm! Quick overview / Application area: - Without block for beam width 60 mm (e.g., for INP) - With block (small side inside) for beam width: 50 mm (INP or box profile) - With block (large side inside) for beam width: 40 mm (INP or box profile) General information about the item: Kjdpfxjpgndgs Adwewt This item is available for pickup only. Additional shipping or transport services are subject to extra charges, which can be provided upon request depending on the delivery location and quantity.

Condition: good (used), Year of construction: 1998, functionality: fully functional, ram adjustment: 40 mm, installation height: 2,400 mm, total width: 17,000 mm, table length: 400 mm, table width: 400 mm, pressing force: 25 t, stroke adjustment: 17 mm, working width: 200 mm, overall weight: 2,500 kg, year of last overhaul: 2023, power: 0.003 kW (0.00 HP), Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]). Speed range: 80-400 [spm]. Completely rebuilded Dec. 2023 Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Kwsdpfx Aoq Ikhpsdwst Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available on our stock for sale.

Condition: good (used), Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg Kwodpjrw Daljfx Adwet

Condition: ready for operation (used), Year of construction: 2018, operating hours: 16,000 h, Additional Equipment Kodex R E Nxepfx Adwewt Precision deburring and roller technology Smart Punch Monitoring Parts conveyor belt for part removal flap Advanced punching equipment This TRUMPF TruPunch 1000 (S19) was manufactured in 2018. It features a closed machine frame, hybrid axis system, and a linear magazine with 20 spots for clamps and tools. Equipped with maintenance-free 3-phase servo motors and a TRUMPF control based on Bosch Rexroth IndraMotion MTX, it offers advanced punching capabilities and efficient operation with only 16,000 work hours. Contact us for more information about this machine. Application Types Punching

Year of construction: 2008, condition: good (used), Item: D-7802-APV-Heat Exchanger Kodpfx Adjf Srmzjwewt Stainless Steel Heat Exchanger Type APV H17, Temperature max. 110 C From 2008. Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Press: 4,5 Bar

Condition: used, Dimensions (D x W x H): 100 x 2000 x 800 mm Kwodjw Ng U Sepfx Adwst With base frame

Condition: used, Year of construction: 1980, Technical data: Max. sheet width: 2500 mm Max. Sheet thickness: 8 mm Ksdpfx Adstvfzcswewt Weight, approx.: 6400 kg

Condition: used, Year of construction: 1962, Working length: 1020 mm Sheet capacity max.: 3.5 mm Kedpfx Adjrh D Ttewewt Dimensions (WxDxH), approx.: 1640 x 1860 x 1390 mm

Condition: good (used), Year of construction: 1992, Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Rudolf Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm Kwsdpfjyanqvox Adwot -Weight: 2000 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Manufacturer: Mubea, die Ø 90 mm -Type: Mubea 90 Mounting Ø 50 mm -Dimensions: Ø 90 x 115 mm Kjdpjiqhg Ujfx Adwowt -Weight: 3.4 kg

Condition: good (used), Punching units, punching unit, punching jaw, punching tool, non-driven latching and shearing units, forming jaw -Ironing material: Aluminum -Punch dimensions: see photo with dimensions -Quantity: 2 pieces Kodpfohf Dzdjx Adwswt -Price: per piece -Dimensions: 240/145/H210 mm -Weight: 22.5 kg/pc.

Condition: good (used), Belt separator LINCK SE with extraction unit type AVS. Very good condition after complete refurbishment! Length 7.0 m Kjdpexcbdgofx Adwowt

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Kwodpjfbt Hujfx Adwst Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: ready for operation (used), Length: 4000mm Width: 1880mm Height: 400mm Kwsdpfxsx Tpvne Adwst 4 pieces