Used Rolling Punches for sale (8,807)

Year of construction: 2008, condition: ready for operation (used), We are offering this ready-to-use Roll-o-Matic roller die-cutting machine, roller size 0.932/3000, manufactured in 2008. Usable roller width: 3000 mm. The upper roller has a diameter of 320 mm and is equipped with a PA or cast nylon cutting sleeve. The roller gap can be adjusted independently on both sides and is equipped with an absolute value display for the roller gap. Operating modes: setup operation; semi-automatic operation; fully automatic operation with a light barrier and time control. Includes 5 conveyor belts, a counter, and additional equipment: support rollers for the lower roller to reduce deflection under high load. Chain drive and more powerful motor. Includes control buttons on both sides. If you have any questions or require more information, please send us a message or call us. Iedpfx Ahsz Ag Uksnoig

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: W400-RM-016, type of input current: three-phase, overall weight: 1,700 kg, Zemat W-18-200 Roll Die Cutting Machine Iiodpfx Ajwcm Tiehnsg Working width 1800mm, 100mm gap between the rollers

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Pressing force 125 tons Table size 880 x 800 mm Iiedjhlnzkspfx Ahnjg Table opening 470 x 140 mm Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Motor power, main drive 22 kW Power connection 380 volts, 50 Hz - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load - Adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of manufacture 2003 - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Iedpfex U Eiasx Ahnoig Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Year of construction: 2018, condition: used, Roll production line König Artisan SFC Year of manufacture: 2018 Condition: cleaned & inspected Suitable for the production of ciabatta and square rolls Hourly output: max. 300 kg of dough Dough belt height: min./max. 12mm/32mm, depending on the dough Dough belt width: 170 mm Dough belt flouring system for the top and bottom Guillotine and punch for a wide range of products Touch panel with recipe management Proofer with water bath, type: MOC-C300 Isdpfxoz A Shae Ahnsig Includes 3 cutting rollers for 1 to 4-row operation Includes 1 punching tool of your choice, subject to availability

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety Isdpfxozy Hpis Ahnoig - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: used, Year of construction: 2017, Roll production line, dough band system, Lippelt Rustica Round 220 - Softrounder Iodpfx Ahsz A Ry Uonoig Year of manufacture: 2017 Condition: used, fully functional Approx. 5530 operating hours Rustica with Softrounder – the all-rounder for processing square and round-shaped wheat rolls With punching station and cutting guillotine – for individual and unique rolls Processes all types of dough, cuts all sizes, stamps patterns into your rolls, or cuts out triangles Ideal for producing rose rolls with fat application 1 to 6-row operation Discharge device for baking trays with a maximum size of 670 x 1000 mm With transverse belt, retractable for the discharge device for further processing Transverse belt with pressure roller and shaping board With seed station (water bath and seed rotating disc), type: Rumo 6 for double-sided seeding Touchscreen control with recipe memory Dough band width 220 mm Includes 2 punching dies (Veronese 5-row and double oblique cut) Includes shaping cups for 40-80g (5-row) and 80-120g (3-row)

Condition: used, Year of construction: 2013, Roll forming line König Artisan SFC Year of manufacture: 2013 Condition: functional, bakery condition Suitable for the production of ciabatta and square rolls Hourly output: max. 300 kg of dough Dough belt height: min./max. 12mm/32mm, depending on the dough Iedpfx Ahjz A Smpenoig Dough belt width: 170 mm Dough belt flour applicator for the top and bottom sides Guillotine and punch for a wide range of products Touch panel with recipe management Molder with water bath, type: MOC-C300 Includes 3 cutting rollers for 1 to 4 row operation Includes 1 punching tool of your choice, subject to availability

Condition: used, Thread rolling machine UPWS 25. Iijdpfszd Rf Njx Ahnog

Condition: used, Year of construction: 2018, Roll production line Fortuna Magnus S6 Profiline Dough divider and rounder Fortuna Magnus S6, year of manufacture: 2018 6-row head machine Iijdpfx Ahjz A R Aconjg Weight range 50 g to 140 g Proofing cabinet with heating and humidifier, year of manufacture: 2012 Operation without proofing cabinet possible Long rolling station Cutting unit Punching unit Seeding station with humidification for one-sided seeding Depositor for baking trays or depositing onto a conveyor belt for further processing More information, pictures and videos will follow...

Condition: used, Year of construction: 1994, table length: 1,780 mm, table width: 1,250 mm, pressing force: 320 t, High-performance mechanical punching press with coil line for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine type: Punching press Year of manufacture: 1994 Press force: 3150 kN Drive type: Mechanical Stroke rate: 20 – 120 spm Ram stroke: 20 – 150 mm Ram adjustment: 150 mm Table area: 1780 x 1250 mm Ram area: 1500 x 1000 mm Shut height: 565 mm Iiedpfsy Ndyaex Ahnog Max. tool weight: 3000 kg Strip width: 30 – 800 mm Strip thickness: 0.5 – 3 mm Max. strip thickness: 4 mm Strip entry height: 160 – 260 mm Strip speed: 4 – 30 m/min Straightening rolls: 9 pcs Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Iiedszxqz Topfx Ahnog Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Pres En: 6,50 m Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Kurs Değeri: 80-360 Used machine

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, machine/vehicle number: BO 15263, total width: 2,300 mm, total length: 2,300 mm, total height: 1,700 mm, travel distance X-axis: 500 mm, travel distance Z-axis: 200 mm, grinding diameter: 150 mm, grinding length: 500 mm, input frequency: 50 Hz, Equipment: documentation/manual, J&S 1096 grinder: issues with the CNC control system. Iodsz Dgphspfx Ahnoig

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1984, machine/vehicle number: 12.873, throat depth: 300 mm, punching force: 100 t, overall weight: 2,250 kg, cutting width (max.): 600 mm, TECHNICAL DETAILS Punching force: 100 t Stroke: 300 mm Punching speed: 28 strokes/min Shearing width: 250 mm Max. sheet thickness: 16 mm Round material cutting capacity: 50 mm Cutting width: 600 mm Max. sheet thickness: 20 mm MACHINE DETAILS Control: Conventional Isdpfszxdqujx Ahneig Drive: Hydraulic Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,250 x 2,100 mm Weight: 2,250 kg Shipping packages: 1 unit

Condition: good (used), Year of construction: 1989, sheet width 2050 mm plate thickness 8.0 mm pre-bending capacity 6.0 mm upper roll diameter 190 mm lower roll diameter 180 mm bending speed 5.2 m/min work height max. ca. 980 mm total power requirement 5.5 kW weight of the machine ca. 3500 kg. range L-W-H 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears * for driving the 3 rollers - mobile operating unit, with connection cable + plug Ijdpjz Dkzhjfx Ahneig - extended roll ends for profile bending rolls - with conical bending device * Inclination of the side rollers by handwheels * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - free-moving operation * electric delivery rollers * electric turning/rolling movement * digital position display of the reels - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes - safety device (cable) - Original instruction manual + CE declaration * Machine link : ?machineno=1008-9401255

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Iedpfjzyay Iox Ahnjig Clamps: 3 Tool positions: 180 MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: repair required (used), functionality: limited functionality, loading space volume: 30 m³, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,000 mm, 30 cubic meter container for cable handling equipment 6 meters long with hinged doors at the rear Iijdpfjz A Dy Ijx Ahnog

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: TEL-178600-558-98, working width: 1,250 mm, The production line was fully operational until it was dismantled. It was taken out of service solely due to a production upgrade/change in manufacturing technology. The machine is currently dismantled and prepared for transport; therefore, a live demonstration is not possible. Prior to dismantling, the line operated without any issues and was regularly maintained. Ijdozmzhmepfx Ahnsig We offer two complete roll forming lines for sale, available either individually or as a package. Manufacturer: SAMESOR Year of manufacture: 1998 SERIAL: TEL-178600-558-98 Manufacturer: AJV-MACHINE Year of manufacture: 2006 SERIAL: AJV24/1100-169

Condition: used, functionality: fully functional, Year of construction: 1986, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 260 mm, roller (top) diameter: 270 mm, side roll diameter: 260 mm, sheet thickness (max.): 16 mm, overall weight: 7,500 kg, total length: 4,040 mm, total width: 1,590 mm, total height: 2,095 mm, power: 11 kW (14.96 HP), Equipment: swiveling upper roller, Technical specifications: max. thickness of pre-bent rolled sheet: 16 mm, max. thickness of non-pre-bent rolled sheet: 12 mm, minimum rolling radius: 240 mm, maximum sheet width: 2000 mm. The machine is a three-roll machine – with an upper roll with a diameter of 270 mm and two lower rolls with a diameter of 260 mm, working speed for bending: 7.5 m/min, main motor power: 11 kW, total installed power: 18.1 kW, overall dimensions (L x W x H): 4040 x 1590 x 2095 mm, the weight of the sheet rolling machine is approximately 7,500 kg. The machine is currently disassembled in our warehouse in Přerov, where it can be tested if desired. Iisdpfxez Alf Us Ahnjg

Condition: like new (used), Year of construction: 2002, machine/vehicle number: 54, functionality: fully functional, pressing force: 60 t, table width: 1,100 mm, table length: 3,000 mm, The machine is in like-new condition! Submitting a bid obligates you to pick up the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, and Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. TECHNICAL DETAILS Punching force: 60 t Table size: 1,100 × 3,000 mm EQUIPMENT Setup operation Automatic operation Iiodpfx Ahozzny Senjg Continuous operation Wiring diagrams Operating manual

Condition: used, Year of construction: 2022, Lippelt Mini Rustica Touch GST roll production line Suitable for the production of ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of manufacture: 2022 Condition: inspected & cleaned Stainless steel housing Isdpfx Asz A Ryhohnjig Touchscreen control with recipe management Equipped with a guillotine and shaping die Saw station, type: Rumo 7 Includes 3 cutting rollers (for 1-4-row production) Includes 2 stamping dies Additional accessories available upon request.

Condition: used, Year of construction: 2019, Lippelt Mini Rustica Touch GST roll production line Suitable for the production of ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of manufacture: 2019 Condition: inspected and cleaned Ijdpfxjz A Side Ahnsig Stainless steel cover Touchscreen control with recipe management Equipped with a guillotine and forming die Cutting station, type: Rumo 7 Includes 3 cutting rollers (for 1-4 row production) Includes 2 stamping dies Further accessories available upon request.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The machine’s control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for circuit boards with a tensile strength of 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 4 presses with max. force of 7 t & 4 presses with max. force of 26 t Force of the lower cylinder max.: 6 t Double-punch punching force: 12 t (2 hydraulic punches) Length of the input sheet min.: 370 mm Length of the input sheet max.: 3,048 mm Width of the input sheet min.: 300 mm Width of the input sheet max.: 1,524 mm Diagonal of the input sheet max.: 3,408 mm Length of the output sheet min.: 250 mm Length of the output sheet max.: 3,048 mm Width of the output sheet min.: 60 mm Width of the output sheet max.: 1,524 mm Vertical travel of the scissor lift table: 550 mm Usable load capacity of the scissor lift table: 5,000 kg Dimensions of the transportable stack of sheets min.: 300 x 100 mm MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller bed PRL3814F Universal destacking device DUF15 Punch head H2 Oil-dynamic hydraulic unit C1515 (3-part pump unit) Lower cylinder EI09 Double rotating punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Iijdszzkt Uepfx Ahneg Processor PENTIUM INTEL II 400 Mhz WINDOWS NT Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made with the exclusion of any guarantee or warranty. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, Year of construction: 2012, Compact roll production line WP Formprofi Year of manufacture: 2012 Condition: refurbished, ready for immediate use Integrated head machine Multimatic, gentle on dough and dimensionally accurate 5-row design Max. hourly output: 4,000 pieces Automatic weight adjustment Isdoz A R Avjpfx Ahnoig Weight range: 35-90g Dough hopper with a capacity of 40 kg Individually adjustable parameters for dividing and rounding Product variety through revolving cutting head (Kaiser roll, button roll, and pressed roll) Perfect centering thanks to separate dough piece cups Individually pneumatically adjustable flour dispenser Line can be moved sideways Discharge device with final position adjustment Variable discharge device for various Euro-standard fermentation trays Siemens control system with touch display and recipe management

Condition: used, Year of construction: 1998, functionality: unexamined, punching force: 30 t, total height: 1,800 mm, total width: 2,800 mm, total length: 4,000 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Hydraulic stamping press, Euromac type CX 1000/30. Manufactured by EUROMAC (Italy) – 1998. Equipment as shown in the pictures. Parameters: - Hydraulic single-tool stamping press - Pressing force: 30 tons - Max. sheet size in the Y-X axis: 1000 mm x 10,000 mm (with repositioning) - Max. thickness of steel sheet: 6 mm Iiodpjyi Uknofx Ahnjg - Max. punch diameter, station D: 80 mm - 200 strokes per minute Number of sheet-holding grippers: 2 Dimensions (L x W x H): 4000 x 2800 x 1800 mm, Weight: 5230 kg, Drive power: 7.5 kW