Used Plum Stoner for sale (124)

Condition: used, diameter 315 mm bore 89 mm Rsdpfxsx Edums Aazsn Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm Rsdpfx Aasvtgn Njzsn bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: used, current intensivity 140 A plate thickness 1,5 mm welding range CO2: 35 - 225 A welding range 30Ar+CO2: 30 - 250 A weight of the machine ca. ca. 90 Kg dimensions of the machine ca. 0,4 x 0,8 x 0,8 m Redpfx Ajxbtmdeazsn

Condition: as good as new (ex-display), x-travel , mm Rsdev Dxzvepfx Aazsn Ironing measuring screw nearly new, measurement range: 225-250 mm Machine dealer with own stock of 1600 m².

Condition: used, thickness of jaw 160 mm max. clamping width 240 mm ca. tension force ca. 4,5 to high of jaw ca. 60 mm Dimensions (L/W/H) ca. 550 x 160/250 x 140 mm weight ca. 50 kg Rodpfx Aov Dxyxoazjn High pressure vice with turning plate. Fixed low special price. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 50 mm throat 300 mm bore stroke 200 mm spindle taper MK 4 spindle turning speed range 55 - 600 U/min table diameter 500 mm column diameter 180 mm feeds 0,07/0,11/0,16/0,22 mm/U total power requirement 1,47 / 1,84 kW Rjdpfevlah Hsx Aazen weight of the machine ca. 500 kg dimensions of the machine ca. 1,3 x 0,65 x 2,17 m Heavy-duty pillar drill with a 2-speed motor and speed adjustment via a pulley. This machine is available at a special price! Machine dealer with own stock of 1600 m².

Condition: used, thickness of jaw 160 mm Rjdpfx Aoumncdsazsn max. clamping width 240 mm ca. tension force 4,5 to high of jaw ca. 60 mm Dimensions (L/W/H) ca. 550 x 160/250 x 140 mm weight ca. 50 kg High pressure vice with turning plate. Fixed low special price. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2011, arm length 2500 mm total column height 3100 mmm Rjdpfxsvrk Aho Aazen weight max. in kg 125 kg swivelling range 270 Grad height over floor 3254 mm weight 945 kg ABUS SV pillar jib crane with chain storage and electric ABUS chain hoist, inspection book available. Crane is dismantled and ready for shipping - see last photo. Machine dealer with own stock of 1600 m².

Condition: used, dimensions 410 x 410 x 860 m Base unit for a Müller swing-arm grinding machine with electrical cabinet. Inside are motor protection switches, fuses, 16 A sockets, etc. The electrical Redpfx Ajxxbzqsazen components are shown in photo no. 2. The grinding machine was sold without the base unit at the buyer's request. Thebase dimensions are 300 x 300 mm. With modifications, the base unit can be used for any similarly sized machine.

Condition: good (used), Thickness of sanding paper 1,1 mm Width of sanding paper 34 mm Length of sanding paper 5620 mm Redpfsxwzbhox Aazsn a total of 19 units in stock

Condition: used, workpiece length 3000 mm roll diameter 50 mm work piece width 300 mm Roll lenght 210 mm Height 800 bis 1100 mm No. - Rolls 12 dimensions of the machine ca. 3 x 0,33 x 0,55 m Lightly used discharge roller conveyor with fold-up stop and measuring scale. Rsdpfx Aaexmkzvjzen Machine dealer with own stock of 2500 m².

Condition: good (used), Year of construction: 2002, cutting diameter 320 mm saw band length 4160 mm cutting width 610 mm cutting lenght max. 500 mm clamping head: max. 620 mm saw speed stufenlos 15-120 m/min work height max. 760 mm dimensions of saw-band 4160 x 34 x 1,1 mm Control Siemens Siematic OP3 total power requirement 2,6 kW weight of the machine ca. 1,96 t dimensions of the machine ca. 2,55 x 2,45 x 1,5 m Well-maintained fully automatic miter band saw with Siemens Siematic OP3 control for quantity and cutting length, hydraulic frame clamp, stepless saw band speed. Machine only used in individual production with small pieces for about 3 hours per week! Estimated operating hours = 3400. Cutting range 0° / 90° - round 320 mm - FLAT 610 x 320 mm !!!! Cutting range 75° - round 320 mm - flat 350 x 200 mm Rodpfx Aajv Htimjzsn Cutting range 60° - round 300 mm - flat 300 x 200 mm Cutting range 45° - round 260 mm - flat 250 x 180 mm Cutting range 30° - round 160 mm - flat 150 x 150 mm Please notice: Price of this machine new: €28000 Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 40 mm throat 297 mm bore stroke 120 mm speeds 8 / 75 - 1600 U/min table-size 500 x 460 mm spindle taper MK 4 column diameter 115 mm spindle feeds: 3 / 0,1 - 0,26 mm/U distance spindle /table 715 mm distance spindle/base plate 1180 mm engine output 1,5 kW Rjdpfx Aajxuv I Rezon table rotating 360 Grad weight of the machine ca. 335 kg dimensions of the machine ca. 0,5 x 0,76 x 1,89 m Unused exhibition machine at a special price: Heavy geared boring machine with digital display for speed and drilling depth, hardened gears, thick-walled column, large table and base plate with T-slots, motorized table adjustment, electromagnetic feed engagement by means of snaps on the control lever. The machine has minor transport damage, see picture no. 6. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2021, sheet width 2020 mm plate thickness 2 mm daylight upper clamping 122 mm bending angle max. 135 ° range L-W-H 2,56 x 0,6 x 1,26 m Rsdpfxjun Uiys Aazjn weight of the machine ca. 1020 kg Unused exhibition machine at a special price: Segmented top rail for bending box profiles, upper beam clamping hand-operated, manual bending beam actuation with weight compensation, degreescale, adjustable bend stop. Warranty = 12 months for single-shift operation. The bending performance refers to 380 N/mm² strength. Plus freight + packaging 270,--. To complement this, we have a Kapema motorized panel shear, model SMP 20/20, capacity 2050 x 2 mm with manual backgauge, cutting line lighting, etc. Please inquire if you are interested. This is an exhibition machine at a special price, so we are selling it without any warranty. Machine. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1986, working width 50 mm wheel diameter 250 mm grinding wheel width max. 40 mm turning speed range 1500 + 3000 U/min total power requirement 1,0 / 1,4 kW weight of the machine ca. 100 t dimensions of the machine ca. 0,65 x 0,45 x 1,15 m Rjdpfjvn Al Tsx Aazjn Deburring machine for deburring sheet metal or flat material, this machine is equipped with grinding wheels but can also be operated with brushes, 2-stage motor, base cabinet with rollers. Machine dealer with own stock of 1600 m².

Condition: used, dia. of draw-in collets 4 - 24 mm max. radius to grind 12 mm grinding range 4 - 24 mm grinding wheel-diameter 100 mm total power requirement 0,4 kW Rsdpfxjv Dxzpj Aazon weight of the machine ca. 100 kg dimensions of the machine ca. 1 x 0,6 x 0,4 m Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 1600 m².

Condition: used, conus taper 40 mm range L-W-H H & K: 0,68 x 0,45 x 0,45 mm range L-W-H Hoffman: 0,72 x 0,5 x 0,4 mm Tool rack for ISO 40 chucks. 1 x Hahn & Kolb (blue), 54 spaces, plastic frame = €380 Dimensions: 0.68 x 0.45 x 0.45 m Rsdpfx Aowi Ug Roazsn 2 x Hoffman (green), 42 spaces each, sheet metal frame = €320 each Dimensions: 0.72 x 0.5 x 0.4 m

Condition: good (used), Year of construction: 1999, saw blade diameter 450 mm cutting diameter 150 mm saw blade diameter möglich: 400 + 370 mm Rsdpfx Aasxqrdmozon Saw blade 50 mm saw blade feed stepless ca. 0 - 1000 mm/min rapid return speed 3300 mm/min table rotating + / - 90 Grad cutting speed 7 - 43 m/min total power requirement 4 kW weight of the machine ca. 1050 kg Overall size 1020 x 1350 x 2000 mm Semi-automatic cold circular saw, made by Kaltenbach, type KKS450H, with Siemens S7 PLC control for cutting speed and sawing height, feed roller conveyor, discharge roller conveyors with hand crank, remote control and digital display. Machine dealer with own stock of 1600 m².

Condition: used, bed width 220 mm daylight 130 mm centre height 240 mm dimensions of the machine ca. 0,5 x 0,3 x 0,15 m Redpoxn Tw Ajfx Aazsn weight ca. 20 kg Additional lynette available upon request - Photo 2. Machine dealer with own stock of 2500 m².

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 25 mm throat 255 mm bore stroke 135 mm spindle turning speed range 8, von 105-2900 U/min table-size 500 x 350 mm column diameter 100 mm spindle taper MK 3 total power requirement 0,65 / 0,9 kW weight of the machine ca. 190 kg dimensions of the machine ca. 0,5 x 0,5 x 1,7 m Unused exhibition machine at a special price: New gear machine, 2-stage right/left rotation, height-adjustable drilling head, Rsdpfxswqr Ibj Aazjn Construction principle "Arboga - Sweden", maintenance-free gearbox with helical teeth Wheels, drill head and table are adjustable 360 degrees around the column,chip protection with electr. Switch, drilling depth indicator. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2019, sheet width 2050 mm plate thickness 2 mm strokes per minute until 38 cutting angle 1,75 ° table height over floor 870 mm total power requirement 3 kW weight of the machine ca. 1520 kg range L-W-H 2,2 x 0,6 x 1,2 m Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a standard geared brake motor via a chain connection to the main axle. the knives are of the highest quality. The optimal cutting angle secures the Rodpfevn Al Hox Aazjn together with the sheet holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille. Plus freight + packaging 270,--. We also have a Kapema manual swing bending machine, model KFS 20/20, with a segmented top rail for bending box sections. Please send us your inquiry if you are interested. This is a demonstration machine at a special price, so we are selling it without any warranty. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: new, sheet width 2050 mm plate thickness 3 mm strokes per minute until 35 cutting angle 2,0 ° table height over floor 870 mm thickness at "Niro-steel" 2 mm total power requirement 4 kW weight of the machine ca. 1550 kg range L-W-H 2,5 x 1,57 x 1,21 m The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Redevdfmxspfx Aazon Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), turning diameter over bed 500 mm turning diameter over slide rest 310 mm turning length 3000 mm turning diameter in the gap 750 mm centre height 250 mm turning speeds 20-1000 U/min no. of turning speeds 18 spindle bore 56 mm Rjdpfsxl E Saex Aazjn longitudinal feed 0,045-1,09 mm/U face feed 0,025-0,625 mm/U number of feeds 55 total power requirement 4 kW weight of the machine ca. 2,37 t dimensions of the machine ca. 4,9 x 1,1 x 1,3 m

Condition: ready for operation (used), tool clamping area 20 - 70 mm weight 5 - 8 kg Price is per piece for the smallest, if you are interested please contact us. Machine dealer with own stock of 1600 m². Rsdpfxotvmzyj Aazen

Condition: used, diameter 85 mm Rsdpsv Dx Aajfx Aazen tool adaptor SK 50 bore of diameter max. 130 mm adjustment of the slide 40 mm tool tapers in the slides 20 mm weight ca. 3 kg Machine dealer with own stock of 1600 m².