Used Pme for sale (7)

Condition: excellent (used), Automatic pallet wrapper Ref. no. 3793 Manufacturer: PME Model: PME 35 * Turntable positioning via fixed stop * Number of bottom and top wraps adjustable * Turntable diameter: 1650 mm * Maximum wrapping height approx. 2400 mm * Own weight approx. 450 kg Lodpfsyc Exijx Adwerg * Suitable for Euro pallets and block pallets!!! * Ramp optional * Very good condition

Condition: used, Year of construction: 2004, machine/vehicle number: 2177/03/9604014, Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton Standard configuration Control system SIEMENS S7 Lrsdpfouqdzdox Adwjg Extended machine accessories Automation PME feeding unit consisting of decoiler and feed / straightening unitDecoilerLoad capacity 2 tStrip width 400 mmMaterial thickness 0.5 - 4.5 mmCoil outer diameter 1800 mmSpreading range 470 - 630 mmHydraulic expansion of the spreadHydraulic pressure armElectronic feed / straightening unitMax. strip width 400 mmMax. material passage 410 mmMaterial thickness 0.5 - 4.5 mmCross-section 1200 mm²Number of straightening rollers 7Straightening roller diameter 80 mmNumber of feed rollers 2Pneumatic lifting of feed rollersFeed speed 50 m/minFeed length 0 - 10 m

Condition: used, Year of construction: 2018, Nominal pressing force: 4,000 kN Ram stroke, adjustable in increments: 30 ... 160 mm Ram adjustment: 180 mm Throat depth: 515 mm Strokes per minute (idle): 45 / min Option: Infinitely variable stroke rate: 10 … 60 / min Ljdpfjw Rbxzox Adworg Die installation height at maximum stroke, bottom dead center, and ram fully raised: 660 mm Table clamping surface (W x D): 1,700 x 1,000 mm Table height above floor: 1,005 mm Ram clamping surface (W x D): 1,100 x 800 mm Pin bore in ram: 65 mm Main motor power: 45 kW Approximate machine height: 4,325 mm Machine weight: 33,000 kg Control system – Press safety control with redundant design and self-diagnosis, featuring plain text status and error display Infinitely variable stroke rate in the range of 10 ... 60 strokes/minute via ABB frequency inverter Control variant: TFT color touchscreen including electronic cam controller with die management and die protection, with color touchscreen visualization, SIEMENS PLC S7-300, die data management, counting systems, data transmission via Profibus Fully automatic stroke adjustment / ram adjustment Rigidly welded tie rods, clear distance between tie rods: 1,345 mm Swiveling main control console Non-contact safety guard – BWS brand LUMIFLEX, mounted at the front of the machine table or die area, installed on the tie rods

Condition: used, Year of construction: 2008, pressure 63 t throat ca. 280 mm Lrodpfx Asxu Nw Sjdwsg stroke 8-100 mm no. of strokes 60-130 Hub/min ram - range of adjustment 80 mm weight of the machine ca. 4,3 t

Condition: reconditioned (used), Year of construction: 2008, Nominal Press Force: 800 kN Ram Stroke, adjustable in steps: 30...120 mm Ram Adjustment: 100 mm Throat Depth: 300 mm Stroke Rate at Idle: 70 / min Continuously Adjustable Stroke Rate: 40 - 130 /min Die Height at Maximum Stroke (bottom) and Adjustment (top): 400 mm* Table Clamping Surface (W x D): 1,200 x 600 mm Ram Clamping Surface (W x D): 600 x 450 mm Ram Bore (pin bore): 50 H7 mm Main Motor Power: 7.5 kW Approx. Machine Height: 3,250 mm Machine Weight: 7,500 kg - With hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, latest UVV (accident prevention regulations) - With Siemens S7/300 control, touch operation on movable operator panel Ledpfxow Ec A Eo Adwsrg - Two-hand operation, stroke gate protected by limit switches - Centering groove - Roller feed: Servo 300 (strip width 300 mm, strip thickness: 4 mm, cross-section: 1000 mm²) - Roll block strips - Anti-vibration feet

Condition: excellent (used), Band width: max. 400 mm Lrsdpfjxg Rlzsx Adweg Band thickness: 0.5 - 4.0 mm Cross-section: 1,000 mm² Upper roller pneumatically liftable Large roller basket at infeed Side band guide with right/left spindle With mounting plate for installation on the press body The feeder receives a completely new press control as a desktop unit upon order

Condition: new, Year of construction: 2023, Nominal press force of 1,000 kN Piston stroke, in steps adjustable 16 to 140 mm Tappet adjustment 90 mm Throat depth 295 mm Lrjdpfjdulidjx Adwjg Number of strokes in the idle 70 / min Mould installation height at Größthub down and adjustment up 420 mm *. Table clamping area (Wxd) 1,050 x 660 mm Plunger clamping area (Wxd) 640 x 460 mm Pin hole in the tappet 65 H 7 mm Power of main motor 7,5 kW Height of the machine 3,085 mm Weight of machine 8,500 kg, hydr. Overload protection, automatic slide adjustment, semi automatic stroke adjustment, latest UVV