Used Pneumatic Nailer for sale (7,118)

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Crsdpsyqr Sxsfx Af Aod

Condition: good (used), Year of construction: 2007, I sell the automatic pneumatic end cutting saw OMGA T521, year 2007. Input table automatic feeding 5,10m (pusher system) Crjdpfx Afevxu Rpo Aod Outut table 1,50m Total length: 8,00m Optimising with automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: good (used), Year of construction: 2012, I sell the automatic pneumatic end cutting saw KuangYung PX60 CFS 200B, year 2012. Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table 9,20m 5 pcs. kickers on left outfeed table Cedpsppwx Esfx Af Aord Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Year of construction: 2024, condition: new, functionality: fully functional, Pneumatically operated can opener including rack for different sizes Codpfx Aettvxwef Aerd Technical description: The can is handled by placing it under the punching head. By manually actuating the safety two-hand control, the lid is punched out with the knife in the punching head. After releasing the two-hand control, the punching head moves upwards to the home position.

Condition: new, functionality: fully functional, fuel type: diesel, fuel: diesel, brakes: retarder, color: dark red, gearing type: automatic, Equipment: ABS, Bluetooth, airbag, onboard computer, SCANIA 770 S V8 FULL PNEUMATIC *AVAILABLE FOR IMMEDIATE DELIVERY – TO BE REGISTERED 1-YEAR MANUFACTURER WARRANTY (EPC) -Kilometers: 0 (New) -Leather/Alcantara interior -All-pneumatic suspension -Retarder -Stationary air conditioning -LED headlights -Satellite navigation system -Digital dashboard -Refrigerator -Alloy wheels OPTION FOR FINANCING OR CUSTOMIZED LEASING AVAILABLE ON SITE. FROM 24 UP TO 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OUR LOCATIONS: SALERNO | Pezzagrande Area, P.I.P. Industrial Zone – 84025 Eboli (SA) Tel. 0828 436141 – Mob. 335 671 3062 NAPLES | Via del Cassano, 457 – 80144 Naples (NA) Tel. 081 0152901 – Mob. 335 671 3062 CASERTA | S.S. 87 Sannitica KM 19.900, 81025 Marcianise (CE) Tel. 0823 1686306 – Mob. 335 671 3062 PIACENZA | Via Piemonte, 11, 29122 Piacenza (PC) Tel. 0823 1686306 – Mob. 328 217 7326 BUSINESS HOURS: MONDAY-FRIDAY 8:30 am - 6:30 pm | SATURDAY 8:30 am - 1:30 pm WE OFFER A WIDE RANGE OF USED COMMERCIAL AND INDUSTRIAL VEHICLES OF MULTIPLE BRANDS: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 – Stralis – Man – Nissan V8 – Intarder – 770S – Limited Edition – 660S – Semi-trailer – Fridge trailer – Tanker – Lamberet – Schmitz – Isuzu – Flatbed – Crane – Tipper – Four-axle – Rear four-axle – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtain-sided – Box body – Tail lift – Refrigerated cell – Insulated with fridge – Van Domenico Truck srl declines any responsibility for possible discrepancies in technical equipment, options or features which, in some cases, may differ from those described. We invite you to verify the features of the specific vehicle. Crjdpfxjy Ny Tcs Af Asd

Condition: new, functionality: fully functional, fuel type: diesel, fuel: diesel, brakes: retarder, color: grey, gearing type: automatic, Equipment: ABS, Bluetooth, airbag, onboard computer, SCANIA 770 S V8 FULL PNEUMATIC *AVAILABLE FOR IMMEDIATE DELIVERY – TO BE REGISTERED 1-YEAR MANUFACTURER WARRANTY (EPC) -Kilometers: 0 (New) -Leather/Alcantara interior -All-pneumatic suspension Crsdey Ny Rzjpfx Af Aed -Retarder -Stationary air conditioning -LED headlights -Satellite navigation system -Digital dashboard -Refrigerator -Alloy wheels OPTION FOR FINANCING OR CUSTOMIZED LEASING AVAILABLE ON SITE. FROM 24 UP TO 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OUR LOCATIONS: SALERNO | Pezzagrande Area, P.I.P. Industrial Zone – 84025 Eboli (SA) Tel. 0828 436141 – Mob. 335 671 3062 NAPLES | Via del Cassano, 457 – 80144 Naples (NA) Tel. 081 0152901 – Mob. 335 671 3062 CASERTA | S.S. 87 Sannitica KM 19.900, 81025 Marcianise (CE) Tel. 0823 1686306 – Mob. 335 671 3062 PIACENZA | Via Piemonte, 11, 29122 Piacenza (PC) Tel. 0823 1686306 – Mob. 328 217 7326 BUSINESS HOURS: MONDAY-FRIDAY 8:30 am - 6:30 pm | SATURDAY 8:30 am - 1:30 pm WE OFFER A WIDE RANGE OF USED COMMERCIAL AND INDUSTRIAL VEHICLES OF MULTIPLE BRANDS: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 – Stralis – Man – Nissan V8 – Intarder – 770S – Limited Edition – 660S – Semi-trailer – Fridge trailer – Tanker – Lamberet – Schmitz – Isuzu – Flatbed – Crane – Tipper – Four-axle – Rear four-axle – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtain-sided – Box body – Tail lift – Refrigerated cell – Insulated with fridge – Van Domenico Truck srl declines any responsibility for possible discrepancies in technical equipment, options or features which, in some cases, may differ from those described. We invite you to verify the features of the specific vehicle.

Condition: used, Vacuum pneumatic conveying system Includes valve, pneumatic vibrators Excluding filter bags Diameter +/- 550mm Csdpfsy Ti D Sjx Af Asrd Suction line diameter 63mm See our other listings.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic - There is a mm ruler system for the height and advancement of the blades. - Centering miter wedge is automatic Crsdpsrbiv Ajfx Af Ajd - Drain button available for fine adjustment - Pneumatic presses use 2 pedals to squeeze the profile - Profile surfaces are polyamide sheet to prevent damage - Side support arms available

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Cedov A E Rnepfx Af Aord Total power requirement 0 kw

Year of construction: 2012, condition: ready for operation (used), DAXNER Pneumatic Conveying System for Coffee / Bulk Material – Complete – Year of Manufacture 2012 For sale is a high-quality, fully equipped pneumatic conveying system from DAXNER, specifically designed for the gentle conveying of coffee and similar bulk materials. Technical Data: Manufacturer: DAXNER (Austria) Year of Manufacture: 2012 Conveying Capacity: approx. 900 kg/h Type of Conveying: Pneumatic (side channel blower) Product: Coffee / light bulk materials Operation: Continuous Crjdpoy Rh Rxofx Af Aod Scope of Delivery: Side channel blower Receiving hopper / separator Valves and control unit Complete, fully functional system Special Features: Very gentle conveying (ideal for sensitive products such as coffee) Low-dust / closed conveying process Robust industrial design Immediately ready for operation Condition: Used, very clean and well-maintained The system is complete and fully functional Inspection by appointment possible. Further information and pictures available upon request.

Condition: like new (used), functionality: fully functional, mileage: 5,52,666 km, first registration: 01/2023, fuel type: diesel, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, suspension: air, Equipment: ABS, Bluetooth, airbag, navigation system, onboard computer, SCANIA 590 S - Registration: 01/2023 - Mileage: 552,666 km - Full air suspension - Retarder - Stationary air conditioning - Navigation system - LED headlights POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING SOLUTIONS ON SITE. AVAILABLE FROM 24 UP TO A MAXIMUM OF 96 MONTHLY INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES BRANCH DOMENICO ESPOSITO S.P.A., EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 Cjdsy Ey E Dopfx Af Asrd 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30 AM–7:00 PM | SATURDAY 8:30 AM–2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 – S 500 – S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S – Semi-trailer – Refrigerated Tipper Semi-trailer – Lamberet – Schmitz – Isuzu – Fixed Body – Crane – Tipper – 4 Axles – Rear 4 Axles – Tway – T-Way – 540 – 460 hp – Xway – X-Way – Three-way Tipper – V8 – Scania – Frost Edition Curtain Side – Box Body – Tail Lift – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl declines any responsibility regarding discrepancies in technical specifications, options, and features, which in some cases may differ from those indicated in this description. We kindly invite you to verify the characteristics of the specific vehicle.

Condition: good (used), Double side corner cutter Very good condition. This is a professional, production device for rounding corners. Solid construction ensures precision of operation. Two trimming heads. Interchangeable knives. Adjustable margins. Controlled by foot pedal. One set of 8mm knives included Stack height approx. 80mm Weight 100kg Cedowungzopfx Af Aerd Efficiency 20 cycles/min Compressed air supply.

Year of construction: 2019, condition: excellent (used), load capacity : max 360 kg Extendable : 700 mm x 1400 mm Codpfx Afspu D Dzo Asrd Angle of rotation around longitudinal pivot : 360`

Condition: excellent (used), Year of manufacture: 2007 The set includes: 1. Pneumatic press Manufacturer: Schmidt Type: 24 Pressing force: 9 kN Two-hand control (two-hand release) Cedjx Eiuxjpfx Af Aerd 2. Strip guide for stamping / embossing Manufacturer: SAEP Type: HSG 3. Control system Manufacturer: Siemens Type: Simatic Panel 4. Additional equipment Magnifying lamp Worktable Ergonomic safety work chair

Condition: used, Table size: 660 x 450 mm Stroke length: 520 mm Crodpfeq U Rbfjx Af Aed

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003584 - Manufacturer Code: LCP2505AK-08 - Condition: As new (display item) - Functionality: Fully functional - Compatible Machine: - If interested, we offer overhaul service, please contact us. 1KG 20X20X20 Csdpfx Afeyrn Sqo Aord

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003569 - Manufacturer Code: QS2A50A25PS01 - Condition: As new (showroom item) - Functionality: Fully operational - Compatible machine: - If interested, we offer a refurbishment service, contact us. 1KG 20X20X20 Credpfeyrn Niox Af Asd

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max FEATURES: - CE marked - Pneumatic front arm feed - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm Csdpfx Afsrx Tats Aerd - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required

Condition: new, Say-Mak SPH 50 - Pneumatic forging hammer - Welded steel construction - Regular striking with valve adjustment - Pneumatic working system with 2 pistons Crsdpfxjuzhkre Af Ajd - Hour counter - All dies and sal-block interchangeable, sal-block adjustable in 8 directions - Adjustable sal-block for the operator's working angle - Simple and functional automatic lubrication system for front and rear pistons - Adjustable foot pedal depending on working height and foot protection cover - 360° adjustable flanged plunger and plexiglass cover - incl. steel foundation Technical specifications - Operating mode: pneumatic - Drop weight: 50 kg - Lifting height: 185 mm - Motor power: 4 kW - Weight: 1000 kg - Dimensions WxHxD: 730 x 1450 x 1750 mm

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke via Festo valves and cylinders. In addition, various monitoring systems are installed for complete automation. Technical data: Torque of electric screwdriver: 0.6 Nm Torque of gearbox: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - a Bosch Rexroth LT303 power module is required to operate the screwdriver. (Power module not included) Codpshxvu Eofx Af Ajrd Screwdriver 1 and 2 each consist of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Straight gear Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight gear Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A motor connection cable of 7m is included. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwing applications. Screw unit: BÖLLHOFF / BOSCH REXROTH, type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke controlled by Festo valves and cylinders. Various monitoring systems are also installed for complete automation. Screwdriver 1 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Inline gearbox Screwdriver 2 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Offset gearbox Dimensions (W x H x D): 165 x 1000 x 200 mm Cjdpfxsfx Hyfs Af Asrd Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Inline gearbox Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset gearbox Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach when pivoted up: max. 860 mm Rotation radius at full reach: max. 360° Vertical guide column: Ø 30 mm Horizontal guide columns: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as a base plate The blue steel base plate is not included in the scope of supply.

Condition: used, Double diaphragm pump with pneumatic drive, DEPA type DH40-FA-ZRT Pneumatic diaphragm pump, double pump Serial No.: B1802498 Year of manufacture: 09.05.2018 Temperature: max. 130°C Size: 40 Particle size: max. 16 mm Suction head: approx. 2 m Suction head, product-filled: approx. 9 m Operating pressure: max. 7 bar Air connection: 3/8" Suction connection: 1 1/2" Pressure connection: 1 1/2" - Self-priming - Aluminum housing - Diaphragm plates made of stainless steel - Diaphragms made of studded E4® PTFE composite - Balls made of PTFE - Ball seats made of stainless steel Space requirement: L x W x H: 370 x 270 x 450 mm Weight: 15 kg Crjdpeib D H Uofx Af Asd Very good condition

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Cedpfeh U Dtuox Af Aord Ram surface: Ø 45 mm Maximum installation height: 235 mm Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: used, Pneumatic edge folding machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-bending sheet metal edges For creating an edge fold Edge folding machine for thin sheet metal, as an alternative to a bending press Manufacturer's No. 9166002, Year of manufacture 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Space requirement L x W x H: 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The edge fold is the doubling of the sheet metal in the edge area, i.e., folded over once to increase the stiffness of the sheet metal. The fold creates a rounded edge, which reduces the risk of injury from cuts on the sharp sheet metal edge. Csdpfodzqblsx Af Asrd Ideal for sheet metal processing of sheet metal furniture, cladding sheets, or for the construction of ventilation and soundproofing systems.

Condition: used, Pneumatic screwdriver, DESOUTTER Pneumatic screwdriver, rod screwdriver for screwing technology Type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Air pressure required: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Rotary switch for right and left rotation (rotary ring control) - Without screwdriver shut-off - Pneumatic control line Ø 4 mm - Pneumatic connection for screwdriver function min. Ø 10 mm Crjdpofgrrhofx Af Aod - Aluminum bracket for handling device - Screw feeder Ø 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg Good condition 4 units available, price per screwdriver