Used Pneumatic Punch for sale (8,074)

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Itsdpfx Aoh U Dtujn Def Weight including table frame: 140 kg In very good condition

Condition: used, Pneumatic C-frame press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Pneumatic press Serial No. 3437 Year approx. 1990 Pressing force 3.0 tons at 6 bar Pressing force 2.6 tons at 5 bar Pressing force 2.2 tons at 4 bar Pressing force 1.6 tons at 3 bar Pressing force 1.0 tons at 2 bar Throat depth 150 mm Power stroke 6 mm Approach stroke 50 mm Itjdpsw A Srwofx An Dsf Total stroke 56 mm Ram surface Ø 100 mm Tool holder Ø 12 mm Maximum installation height 180 mm Table size 200 x 200 mm Compressed air requirement max. 6 bar - Pneumatic power cylinder with mechanical force amplifier (wedge-lever principle) - Press cylinder height-adjustable on column via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Space requirement (L x W x H) 440 x 230 x 750 mm Weight 127 kg Good condition

Year of construction: 2013, condition: excellent (used), Punching force 80 kN working stroke 40 mm Itjdpelmk Uyjfx An Dsf installation height 140 mm throat 110 mm Working pressure 10 bar Space requirement L x W x H 0.9 x 0.9 x 1.4 m Weight 250 kg Operating instructions

Year of construction: 1990, condition: good (used), machine/vehicle number: 8988, Offer 22523 Technical data: - Pressure capacity at 10 bar 35 KN - ram stroke 12 mm - throat 95 mm - Installation height approx. 134 mm - table size approx. 230 x 190 mm Itjdpfx Ansk Rugvs Djf - Air consumption per stroke 8,0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - weight approx. 100 kg - with: - foot switch - pressure gauge + pressure regulator - 4 x punching tool

Condition: not inspected (used), functionality: unexamined, total length: 900 mm, total width: 550 mm, total height: 1,100 mm, overall weight: 150 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to collect within the specified dates: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 550 x 1,100 mm Weight: 150 kg Ijdpfx Ansyn Eqce Detf EQUIPMENT Base frame External reference: Groven - Lot 21

Condition: good (used), Renz Punch Super 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 square perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Itjdsyzt Nhopfx An Dof Available with or without a hanger cutout Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. Requires a 3-phase, 380V power supply. Weight: 400 kg

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Iedpfjywdt Ajx An Dotf Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Itedpfxsyur Dio An Dsf Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Iedpfouzv Tzex An Dotf Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: good (used), Renz Punch 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 perforation tool (4x4mm square) and a hanger cutting module. Side tables are also included. Manufacturer’s description: Perforating machine with a working width of up to 700 mm. Designed for continuous operation and heavy loads. Foot pedal-activated operation. Perforation of up to 40 sheets (4.5 mm) in a single cycle. Quick and easy replacement of perforation strips. Available with or without a hanger cutout. Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. The machine operates on a 3-phase, 380V power supply. Weight: 325 kg. Made in Germany. Isdpoyrz U Eofx An Dstf

Condition: good (used), Renz Punch 500 Perforator This device is in very good condition. New model with adjustable controls. Electric drive, foot pedal control. The set includes a 3:1 perforation tool, a 4x4mm hole, and a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a suspension slot Available with QSA slots (quick format change by disabling selected needles without removing the slot) Available with two-piece slots – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) 3-phase powered Weight: 120 kg Iodpfx Aeynfxaon Detf

Condition: new, Year of construction: 2025, C43 airend Motor power 5.5 kW Pressure 8 bar FAD 888 l/min – 53 m3/h Itsdovpgcljpfx An Djf Power supply 400 V – three-phase -50 Hz Start YD Noise level 66 dB Connections 3/4″

Condition: good (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 199.2 m³/h, pressure (max.): 10 bar, PROD. - CHICAGO PNEUMATIC TYPE - CPVS25 Iodpjrb A Sfsfx An Dstf S/N - ITJ109435 YEAR - 2017 CAPACITY (kW) - 18.5 OUTPUT (m3/min) - at 7.5 - 3.32, at 8.5 - 3.14 , at at 10 - 2.92 CIS (bar) - 10 INVERTER - yes

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Isdpfx Ash A Sfdon Dstf Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos. Itedpoymn Hwofx An Djf

Condition: excellent (used), Year of construction: 2015, overall weight: 750 kg, volume flow: 4.8 m³/h, operating pressure: 8 bar, input voltage: 400 V, Screw compressor CHICAGO PNEUMATIC CPC 40 (2) Screw stage Atlas Copco Engine 30 kw Capacity 4.80 m3/min Pressure 8 bar Year of production 2015 Iedpfx Aeudz Sxsn Dstf Compressor after service, filter and oil replacement.

Condition: used, Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 250 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Total length: 570 mm -Total length extended: 820 mm -Number: 4x available -Price: per piece -Dimensions: 96/96/H570 mm -Weight: 6.4 kg Itodpfedkzvlex An Djf

Condition: used, Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders Itodpfx Asdkx T Aen Dsf -Stroke: 220 mm (limited) -Piston diameter: 80 mm -Piston rod: 25 mm -Total length: 555 mm -Total length extended: 775 mm -Number: 2x available -Price: per piece -Dimensions: 95/95/H555 mm -Weight: 6.45 kg/piece

Condition: used, pneumatic corner drill, compressed air drill, compressed air angle drill, corner drill -Manufacturer: Chicago Pneumatic, pneumatic angle drill -Type: CP-0323-TANAR -Operating pressure: 6.2 bar max. -Speed: 175 rpm Itjdpfxslw Az Ao An Dof -Dimensions: 790/260/H110 mm -Weight: 11 kg

Condition: good (used), Short-stroke cylinder, pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder Itsdpjv Ab Hlsfx An Def -stroke: 50 mm -Piston: Ø 50 mm -Piston rod: Ø 16 mm -Number: 2x available -Price: per piece -Dimensions: 65/70/H95 mm -Weight: 0.65 kg

Condition: new, Year of construction: 2025, functionality: fully functional, degree of automation: automatic, Pneumatic press for raw dried delicacies. Made completly of stailes steel. Powered by air- 6 bar Measurments: by client demands Itodpfx Aewqcbfen Dsf

Condition: used, Year of construction: 2000, machine/vehicle number: P18096N, functionality: fully functional, pressing force: 20 t, stroke length: 160 mm, total height: 2,150 mm, overall weight: 180 kg, Good day, We hereby offer you, without obligation, a used workshop press from Rodcraft, model WP 20F. Manufacturer: Rodcraft Pneumatic Tools GmbH & Co. KG Model: WP 20 F Year of manufacture: 2000 Machine No.: P18096N Hydraulic stroke: 160 mm Pressing force: 20 t Machine dimensions: 2150 x 960 x 660 mm Iodpoygm N Defx An Dstf Transport dimensions: 2150 x 980 x 750 mm Machine weight: 180 kg Note: The above technical data has been taken from the manufacturer’s brochures or other sources, for which we cannot guarantee the accuracy or completeness. Scope of delivery: 1 unit used workshop press Rodcraft, type WP 20F Application area and condition: The machine was occasionally used in an industrial metalworking shop for pressing out bearings, etc. The machine is fully functional and in good condition. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: reconditioned (used), Year of construction: 2013, overall weight: 447 kg, volume flow: 178.8 m³/h, pressure (max.): 13 bar, Equipment: type plate available, PROD - CHICAGO PNEUMATIC TYPE - CPVS40 Ijdpfx Anjrb A Nyo Dstf S/N - CAI616722 YEAR - 2013 POWER (kW) - 30 EXPENDITURE. (m3/min) - 2.98 CIS (bar) - 13 WAVE - yes

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-120AA5V, Chicago Pneumatic Angle Turbine Grinder CP3T30-120AA5V with autobalancer with spindle lock with tool-free adjustable protective cover Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 12000 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Grinding wheel Ø outside max.: 125 mm Weight: 2.4 kg Iodpfx Aovptx Ten Dotf Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free

Condition: like new (used), functionality: fully functional, Year of construction: 2008, operating hours: 1 h, machine/vehicle number: 6151922015, From our demonstration tool inventory, tested and fully functional: Used Chicago Pneumatic Redi Power RP2015 pneumatic pistol screwdriver with shut off clutch with trigger start Output: Hex 1/4" Torque: 2.0 to 5.5 Nm / 18 - 49 in.lb Itodsv Im Ncspfx An Djf Idle speed: 1470 min-1 Length: 200 mm Weight: 1.0 kg Other tools for industrial production and maintenance on request.