Used Pneumatic Stapler for sale (8,206)

Condition: good (used), Year of construction: 1995, fuel type: electric, Manufacturer: Hyster Tip: E 3,20 XM lifting capacity: 3200 kg Blodpfx Aslz Nbpspajp lifting height: 3700 mm Fork length: 1200 mm

Year of construction: 2004, condition: excellent (used), LARIUS 10:1 pneumatic press For sale: a pneumatic press from the renowned company LARIUS, manufactured in Italy. This device is designed for dispensing high-viscosity liquids – ideal for lubricants, adhesives, industrial paints, silicones, etc. Technical specifications: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi Bledpfxjz Sk Uys Apaop • Air working pressure: 3–7 bar (40–100 psi) • Output: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Manufacturer: LARIUS – Italy In very good condition.

Condition: used, Year of construction: 1951, Ram weight: 100kg. Including anvil block, anvil, standard dies and motor. Total weight: approx. 3400kg including anvil block. The machine was purchased in working condition in 2019 and has not been operated since. The hammer has very good compression and is in good condition. Low operating hours, no continuous operation. The sliding surfaces of the ram are greased. Documentation available. An on-site inspection is possible. Bledpfx Apsz R A Iueaop

Condition: excellent (used), Year of construction: 1996, CUTTING LENGTH 3050MM POWER BACK GAUGE 1000MM PNEUMATIC SHEET SUPPORTS SIDE GUAGE 1.0 METRE SERIAL NUMBER HOLD DOWN HYDRAULIC BLADE GAP ADJUSTMENT STANDARD Blodpfj Af Iy Aex Apajp VARIABLE RAKE STANDARD SHADOW LINE LIGHT STANDARD CENTRALISED LUBRICATION STANDARD SHADOW LINE LIGHT STANDARD STROKE COUNTER STANDARD ADJUSTABLE STROKE STANDARD MAX THICKNESS MS 6 MM MS MAX THICKNESS STAINLESS 4 MM SS

Condition: like new (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, pressing force: 1 t, table width: 200 mm, table length: 230 mm, total width: 400 mm, total height: 860 mm, overall weight: 105 kg, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Blsdsv E Sazepfx Apajp Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Rotation stop lever height: 880mm length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 9556, saw blade diameter: 350 mm, type of input current: three-phase, Pneumatic cutoff saw for solid wood, Stromab TR 350, year of manufacture 2023. Connection 3 x 400 V, CE version. Support table of 1000 mm to the left and right of the saw, pneumatic drive for the saw unit, automatic separation of small pieces, safety control with 2 hands, brake motor, emergency stop, and protective guard. Widia saw blade 350 x 30 mm, motor power 4 HP at 3000 rpm, work table height 800 mm, 2 dust extraction ports with a diameter of 80 mm. Sawing capacity 150 x 80 mm and 210 x 30 mm. Equipped with an extended roller conveyor and manual lateral guide. Blsdpfx Ajz Ngkqepaop

Condition: used, Year of construction: 2025, TPW 30 AL - AS with all-wheel drive, axle stub steering, and tires 559x300 Transport platform made of Douglas fir wood, 40 mm thick, Dimensions: Length 4000 Width 2000 Drawbar 1600 mm with towing eye 40 mm and safety mechanism with height adjustment Paint finish: RAL 2000 Blsdjhbmukspfx Apaop #In-plant transport systems #Heavy-duty trailers 6-100 tons #Heavy-duty trailers from 3 tons to 100 tons #Heavy-duty transport platform trailers #Platform heavy-duty trailers #All-wheel steering #Transport trailers

Condition: as good as new (ex-display), Festo pneumatic cylinders RA1941 Manufacturer: Festo cylinders Some still Orginalverpackt alongside prices are per piece. 8 x ADVU-25-10-P-A 86,39€ 7 x ADVU-40-15-P-A 128,46€ 8 x ADVU-40-20-A-P-A 131,49€ 4 x ADVU-25-20-A-P-A 89,60€ 8 x DNC-63-160-PPV-A 198,00€ 1 x DNC-50-125-PPV-A 165,03€ 7 x DNC-40-80-PPV-A 139,50€ 1 x DNC-40-200-PPV-A 149,01€ 2 x DNU-32-50-PPV-A price on request 3 x STA-50-30-P-A-SA Price on request 1 x FENG-40-200-KT+DNC-40-200-99A 624,99€ 1 x FENG-40-200-KT 474,99€ 4 x DMM-25-15-P-A 46,38€ 1 x DFM-32-50-PA-GF 228,55€ 8 x DNC-32-40-PPV-A 120,54€ 1 x DNC-32-50-PPV-A 121,15€ 10 x DNC-32-80-PPV-A 122.93€ 10 x DNC-40-50-PPV-A 137,13€ 3 x DNC-50-80-PPV-A 160,87€ 2 x DNC-50-50-PPV-A 157,85€ 5 x DSNU-25-25-PPV-A 43,28€ 4 x ESNU-25-20-P-SA Price on request 1 x DSNU-25-10-P-A 36,59€ 2 x DSNU-20-20-P 34,65€ 1 x ESNU-16-25-P Price on request 1 x DSNU-20-20-P-A 34,65€ 1 x DSNU-20-50-PPV-A 40,77€ 2 x DGPL-40-450-PPVA-KFB price on request Bedpfxjk Abl No Apaelp 7 x DNC-40-500-PPV-A 172,76€ 7 x DSNU-32-80-PPV-A 52,08€ 4 x DSNU-32-60-PPV-A 57,12€ 6 x DZF-25-12-A-P-A 110,52€ 1 x DZF-32-A-?-A price on request 2 x DZF-32-125-P-A-SA 126,57€ 2 x DSNU-25-125-PPV-A 45,05€ 1 x DSNU-25-125-PPV-A+2 SENSORS 101,30€ 1 x DSNU-25-300-PPV-A 48,35€ 1 x DNC-63-160-PPV-A-KP 815,28€ 2 x DNC-63-160-PPV-A 198,01€

Year of construction: 2022, condition: used, Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System Manufacturer: Carsoe Model: Anytray Buffer 1500 LLANONE Right Pneumatic Year of manufacture: 2022 Machine type: Tray buffer / product accumulation system Description The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines. Bodpfxjyt Hu Te Apaolp Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities. Technical Specifications - Manufacturer: Carsoe - Model: Anytray Buffer 1500 LLANONE Right Pneumatic - Year: 2022 - Power: 0.46 kW - Supply voltage: 230 VAC + N + PE - Frequency: 50 Hz - Air pressure: 6 bar - Max short-circuit current: 6 kA - SO-No.: FOD 220002 - Part number: P09390 Key Features - Pneumatic tray buffering system - Designed for stable product flow in production lines - Hygienic stainless steel construction - Suitable for high-capacity food processing environments - Easy integration into automated tray handling systems Applications - Seafood processing lines - Ready meal tray production - Automated packaging lines - Food processing plants Condition Used . More photos and full specifications: /

Condition: used, Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Nagel Multinak S Year 1994 - Serial-No. 14069 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Bjdps Af Alzsfx Apaolp On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Manuelle Heftmaschine / Manual Stapler Nagel ENAK 50 Serial-No. 7005 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Bedpfx Ae Af Ag Eopajlp

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 2 t, table width: 330 mm, table length: 350 mm, throat depth: 100 mm, air pressure: 6 bar, cylinder diameter: 28 mm, For sale in new condition HYUNDAE HP-2000 2t PNEUMATIC PRESS Brand: HYUNDAE MACHINERY & ELECTRIC CO.,LTD Type: HP-2000 manufacturing of year: 2021 Max. pressing force: 2t open height:300mm Bolster Size: 350x330mm Stroke length: 100mm Cylinder diameter: 28mm built on a press stand Two-handed operation Voltage: 110V Air Connecting Hose Diameter:12mm Bjdovbfbwopfx Apaelp

Condition: used, Year of construction: 1998, machine/vehicle number: 9083432, functionality: fully functional, Pneumatic press 125 tons Bljdpfxeyzhqye Apasp

Condition: used, Year of construction: 1987, functionality: fully functional, overall weight: 5,000 kg, total width: 960 mm, total length: 1,860 mm, total height: 2,160 mm, Pneumatic Forging Hammer MA4132 – 160 kg Heavy-duty pneumatic forging hammer, believed to be model MA4132, manufactured in the USSR. The machine is complete with separate anvil/base and electric motor. Technical data: Falling parts weight: approx. 160 kg Main machine weight: approx. 3,700 kg Anvil/base weight: approx. 1,000 kg Electric motor weight: approx. 300 kg Total weight: approx. 5,000 kg Motor power: approx. 15 kW* Year of manufacture: believed to be 1987* Serial/identification marking on the machine: “87 №149” Location: Estonia Blodpozxd E Sefx Apajp Solid, heavy industrial forging hammer suitable for blacksmithing and forging work. The machine is sold as shown in the photos. Loading can be arranged by agreement. Inspection is possible by appointment. More photos and video available on request. *Some technical specifications and year of manufacture are based on identification of the machine as MA4132 and should be considered approximate.

Condition: used, Year of construction: 2012, operating hours: 1,855 h, fuel type: diesel, gearing type: automatic, overall weight: 2,500 kg, empty load weight: 2,250 kg, color: red, mileage: 1,855 km, first registration: 03/2012, maximum load weight: 250 kg, axle configuration: 2 axles, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 41610 Mofett, On-board forklift truck * Year of manufacture: 2012 * Load capacity from 1,001 to 5,000 kg * Lifting height from 2,001 - 5,000 mm * Transmission type: Automatic * Permissible gross weight: 2,500 kg * Unladen weight: 2,250 kg * Payload: 250 kg * Manufacturer: Mofett M4 254 - Load capacity 2,500 kg * Year of manufacture: 2012 * Fork length adjustable from 1,600 mm to 2,800 mm * Operating hours: 1,855 hours * [youtube] youtube.com/watch?v=KLsGvNckwiw [youtube] Disclaimer: Subject to changes, prior sale, and errors. More photos and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. Bledpfx As Ahmxdopaep * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists; we will be happy to assist you.

Condition: used, TOX Pressotechnik Industrial Pneumatic Press Station / Pneumohydraulic Press with Roller Guide Table (6 bar, 2.4 m), Used Equipment Technical Data: Type: Industrial Pneumatic / Pneumohydraulic Press Station Overall Dimensions (W × D × H): 1300 × 1270 × 2400 mm Roller Feed Conveyor Dimensions: 470 × 500 mm Work Table Internal Opening / Clearance: 450 × 550 mm Press Cylinder and Drive Data (TOX Pressotechnik): Manufacturer: TOX Pressotechnik GmbH (Made in Germany) Type: Q-K 015.030.200.12 Serial No.: 340379.117 System: Pneumohydraulic power cylinder (TOX Powerpackage) Maximum Air Pressure: 6.00 bar Oil Volume (ΔV): 135 ml Bljdsz Rxb Djpfx Apasp Equipment and Features: Enclosed, sound-insulated safety cabin with inspection window and upward-opening door Heavy-duty four-column press frame for precise parallel alignment Integrated roller feed conveyor for easy workpiece handling Pneumatic air preparation unit (pressure regulator and filter) and emergency stop button Overall Dimensions: Width: 1300 mm Depth: 1270 mm Height: 2400 mm

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: CIP-8P_1001, overall weight: 320 kg, total length: 650 mm, total width: 2,300 mm, total height: 1,100 mm, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Pneumatic Press-In Machine CIP-8P Bjdpe Afwygefx Apaslp Technical Data: Pressing force 80 kN, approx. 8 tons Force setting via display, accuracy 1 kg Compressed air 8 bar, min. 150 l/min Tool and shank diameter: Total length 37 or 76 mm, of which 15 mm is in the holder, Ø 12.7 mm Compatibility: Tools from other manufacturers can also be used External dimensions (L × W × H) and weight: 650 × 2,300 × 1,100 mm, 400 kg Warranty: 36 months after delivery

Condition: like new (used), Year of construction: 2005, functionality: unexamined, For sale: complete industrial lot of 27 pcs FESTO DNG-160 pneumatic cylinders. Manufacturer: FESTO Model: DNG-160 Quantity: 27 pcs Type: pneumatic cylinders / heavy-duty actuators Condition: unused old stock / New Old Stock Age: approx. 20 years in storage Functionality: not individually tested Sale: complete lot only Location: Slovakia, EU The cylinders have never been installed or used, but have been stored for approx. 20 years. Due to the long storage period, inspection and possible replacement of seals before industrial use is recommended. Suitable for maintenance departments, machinery builders, automation companies, spare parts stock or industrial equipment dealers. Sold as shown in the photos. Loading possible. Worldwide shipping on request. Zum Verkauf steht ein kompletter Industrieposten mit 27 Stück originalen FESTO DNG-160 Pneumatikzylindern. Hersteller: FESTO Modell: DNG-160 Menge: 27 Stück Typ: Pneumatikzylinder / Industrie-Aktuatoren Zustand: unbenutzte Lagerware / New Old Stock (NOS) Alter: ca. 20 Jahre gelagert Bjdpfx Aewxfrpjpaelp Funktion: nicht einzeln getestet Verkauf: nur als kompletter Posten Die Zylinder wurden nach unserem Kenntnisstand nie montiert und nie im Betrieb eingesetzt. Aufgrund der langen Lagerzeit werden sie jedoch ausdrücklich als ungetestete Lagerware verkauft. Eine Prüfung sowie ggf. der Austausch von Dichtungen vor industriellem Einsatz wird empfohlen. Geeignet für Instandhaltung, Maschinenbau, Automatisierungstechnik, Ersatzteillager oder Händler für Industriekomponenten. Verkauf wie auf den Fotos. Standort: Slowakei, EU. Verladung möglich. Versand auf Anfrage möglich.

Condition: as good as new (ex-display), Year of construction: 2025, Heavy-duty transport trailer with a payload of 8 tons on the loading platform. Dimensions: 6000 x 2400 x 900 mm, with a turntable steering system on the front axle and a fixed trailing axle. Tires: pneumatic, 7.00-15. Overrun brake and parking brake on the steering axle. Loading platform: Wood, 30 mm thick, or for an additional charge of €220.00, 18 mm screen-printed wood. On the front, facing the direction of travel, a 1000 mm high front wall with a mesh size of 40 mm. Lashing points on the longitudinal sides for securing the load. Optionally available with a lighting system for an additional charge of €980.00, with a spiral cable as a connecting cable. Paint finish in RAL 2000; other colors available upon request for new production. Blodpskzhqxjfx Apasp

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Bjdpfjux Sfzex Apaslp Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: excellent (used), functionality: fully functional, a complete workstation with integrated pneumatic system. featuring pneumatic two-hand release Force: 45 kN Stroke: 60 mm Bjdpjz E A Ehjfx Apaelp

Condition: new, functionality: fully functional, empty load weight: 2,100 kg, maximum load weight: 16,000 kg, overall weight: 18,100 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, wheelbase: 4,000 mm, color: orange, Year of construction: 2026, Equipment: center pivot plate, The TPW 16 VL - LK has a payload capacity of 16,000 kg on the loading platform at 6 km/h. The dimensions are 5,000 mm long, 2,000 mm wide, and approximately 640 mm high. It features a turntable steering system on the front axle and a rigid trailing axle. The drawbar is equipped with a drop safety device, and the forged towing eye has a 40 mm bore. Heavy-duty banded tires 425 x 150-305 are fitted as twin wheels on steel rims and sealed on both sides with tapered roller bearings using a Nilos ring. For safety, four welded-on lashing brackets are fitted to the longitudinal sides (for load securing), and a double-acting wheel chock is mounted on the frame. The paint finish is yellow-orange RAL 2000. The transport floor is made of 30 mm tongue-and-groove boards, countersunk and bolted. Bsdpjrcfz Tsfx Apaelp

Condition: new, ARI-Armaturen 23.470 Pneumatic Control Valve DN65 PN25 – Siemens SIPART PS2 Industrial pneumatic control valve manufactured by ARI-Armaturen, equipped with an ARI pneumatic diaphragm actuator and a Siemens SIPART PS2 electro-pneumatic valve positioner. The valve is suitable for industrial process control applications requiring precise regulation of flow, pressure, or temperature. Technical specifications: * Manufacturer: ARI-Armaturen * Valve type: 23.470 * Valve design: Globe control valve * Nominal diameter: DN65 (2½”) * Pressure rating: PN25 * Flanged connections: EN 1092-1 / EN 12351-4 marking on protective cover * Valve body marking: JS1049 * Valve tag/reference: 799000252 Pneumatic actuator: * Manufacturer: ARI-Armaturen * Diaphragm actuator * Actuator travel: 30 mm * Spring range: 1.50–3.00 bar * Supply pressure range: 3.3–6 bar Valve positioner: * Manufacturer: Siemens * Series: SIPART PS2 * Model: 6DR5010-0NG00-0AA0 * Control signal: 4–20 mA * Protection class: IP66 / NEMA Type 4X Condition: Industrial surplus equipment, visually in very good condition. Functional testing has not been performed. Bedpfo Agu T Aex Apaolp The valve is supplied as a complete assembly, including the pneumatic actuator and Siemens SIPART PS2 positioner, as shown in the photographs. Location: Rotterdam, Netherlands Delivery: EXW Rotterdam Sales conditions: Sold as is, where is, without warranty, claims, or returns. Please contact us for further information or a quotation.

Condition: ready for operation (used), Burger D05 Pneumatic Press Weight: 230 kg Pressing force: 6000 kg Stroke: 39 mm Operating pressure: 6 bar You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! Bsdpfjz Hya Eox Apaelp You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and view our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 1999, machine/vehicle number: 9093548, functionality: fully functional, Pneumatic press 63 tons Bedpfoyzhvpox Apaolp