Used Potato Chips Making Machine for sale (69,888)

Condition: used, Year of construction: 2021, operating hours: 7,246 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rotational speed (min.): 10,000 rpm, spindle speed (min.): 20 rpm, Equipment: chip conveyor, CNC machining center, used Fjdpfx Aajzbvqgjtepl Manufacturer: DMG MORI Type: M1 - Plus Year of manufacture: 2021 Purchase / Acceptance: May 26, 2022, as a demonstration machine Operating hours: Spindle: 4,049 h Total: 7,246 h Control system: Siemens Sinumerik 828D + Job Shop Working area: X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Spindle: Speed: 20 - 10,000 rpm Power: 13/9 kW Mount: SK 40 DIN 69871 Tool changer: 24-position Equipment: - Renishaw 3D probe - Renishaw tool probe - Chip conveyor, left side - Coolant gun

Condition: used, XYZ 2400 Gap Bed Centre Lathe with Acu-rite 2 Axis DRO, 315mm 3 Jaw Chuck, Swing Over Bed 660mm Diameter, Distance between Centres 2400mm, Spindle Speeds 30 - 1500rpm, 2 Position QCTP, 710mm Diameter Face Plate, Steady Fedpfxezy N Rcs Aatspl Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Fpsdpfx Aaszi Awhjtol Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Table size: 1400 x 600 mm Maximum table load: 1000 kg Controller: Fanuc 18i-M ATC: 30 X-axis: 1070 mm Y-axis: 610 mm Z-axis: 610 mm Cutting feed rate: 10-10000 mm/min Fpodjztbuyspfx Aatsl Rapid traverse rate: 20/20/15 m/min Spindle taper: BT 40 Spindle speed: RPM 50-12000 Transport dimensions: L=3200mm, W=3000mm, H=2700mm Machine weight: 8200 kg Chip conveyor: L=5000mm, H=1400mm Internal cooling Water tank: L=2400mm, H=1200mm

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Fpjdoxni Iqspfx Aatol Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), functionality: fully functional, For sale: older freezing unit for cleaning rubber parts, older make. The machine is operational. - Drum volume: 150 l - Working range: from -40°C to -130°C Fodpfx Aox A Sz Aoatspl - Dimensions (incl. shaking/separation table) (W x L x H): 2.2 m x 4.3 m x 2.4 m

Condition: like new (used), Year of construction: 2022, operating hours: 530 h, functionality: fully functional, machine/vehicle number: 249582, Fully working. when you make reservation payment we can pack machine after 16 weeks. if you need any other information or photo,video you can contact me in Whatsapp, viber or email Fsdpfxszxxqpj Aatopl +37067337985

Condition: like new (used), Year of construction: 2016, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few cutting hours. * Machine designed for high material removal rates. * Prismatic guides on all axes. * Quadruple prismatic guide system on the Y-axis. * Extremely rigid structure. * Lubrication system for guides, oil-fed, with automatic machine stop. * Renishaw tool probe. * BT 50 spindle taper. * 18.5 kW high-torque motor. * Cutting power of 580 N/m. Fedpfx Aszy H I Soatjpl * Chip evacuation capacity of 540 cm/min. * Automatic Okuma IGF OSP300 conversational programming system. * Automatic force control and tool consumption monitoring. * Parameterized automatic tool collision avoidance system. * Communication ports via USB, PCMCIA card, and RS 232. * Tool life management and tool consumption monitoring. * Automatic control of tool torque and stresses. * Table dimensions: 2,200 x 850 mm. * Permissible weight: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Oil cooler for the spindle. * Rapid traverse speed: 20,000 mm/min. * Tool storage for 36 tools. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system with 70 bar pressure. * 30-micron anti-particle filter system. * LTA fume extraction equipment. * Rear chip extractors, hinged type. * Machine currently in production. * Inspectable by a qualified, certified Okuma technician. * Near-new condition. * Extensive range of BT 50 tool holders. * Electrical transformer, documentation, parts list, electrical diagrams, programming and operations manual. * Machine weight: 20,500 kg. * Immediate delivery, unless sold prior.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Manufacturer: HERMLE Model: C 800 V Machine Type: CNC Vertical Machining Center Year of Manufacture: 2002 Control System: Siemens SINUMERIK Configuration: 3-Axis Machining Center Location: France Condition: excellent, can be demonstrated while powered on Origin: technical university / training and research environment Technical Data: Travel Ranges: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle: Tool Interface: HSK-A 63 Max. Spindle Speed: 16,000 rpm Max. Spindle Power: 15 kW Max. Torque: 130 Nm Internal Cooling / Coolant Through Spindle: 40 bar Fjdpfxjzd Sr Re Aatepl Axes / Feed Rates: Max. Axis Speed: 35 m/min Acceleration: 5 m/s² Tool Changer: Tool Magazine: 30 positions Tool System: HSK-A 63 Equipment: Siemens SINUMERIK CNC control system HERMLE control panel 3-axis configuration Vertical milling spindle HSK-A63 spindle 16,000 rpm spindle speed Internal cooling / High-pressure cooling through the spindle, 40 bar 30-position tool magazine Enclosed work area Fixed machine table with T-slots Machine light Coolant system / Pump unit available External high-pressure pump visible Renishaw system / Measuring probe system visible Electronic hand-held device / Handwheel Control cabinet integrated Extraction / Exhaust connection visible Machine vise visible in photos, scope of delivery to be agreed Manuals / technical documentation available Description: For sale is a HERMLE C 800 V CNC vertical machining center, manufactured in 2002, with a Siemens SINUMERIK control system. The machine comes from a technical university or training and research environment in France. It is therefore not a conventional production machine from heavy series production, but a machine from a technically well-maintained environment. The HERMLE C 800 V is a very stable and high-quality 3-axis milling machine with a large working area, HSK-A63 spindle, 16,000 rpm, 30-position tool magazine, and internal cooling / high-pressure cooling through the spindle at 40 bar. The following combination is particularly noteworthy: * HERMLE machine construction quality * Siemens SINUMERIK control system * HSK-A63 tool interface * 16,000 rpm spindle * Internal cooling / High-pressure cooling 40 bar * 30-position tool magazine * Renishaw measuring system visible * Origin from a technical university environment The machine is very well suited for toolmaking, mold making, prototype construction, training, research, single-part production, and precise general CNC milling operations. The machine is currently set up and can be inspected or demonstrated while powered on, by arrangement. Note on peripherals: According to the current photographic documentation, a coolant / pump unit and an external high-pressure pump are available. A large separate KNOLL chip conveyor, KNOLL paper band filter, or a large central KSS filter system is not available. The exact scope of delivery of peripherals, accessories, clamping devices, tool holders, measuring probes, and documentation will be finalized before the sale. Sold as a used machine, as is, without warranty. Technical specifications are subject to change without notice. Subject to prior sale.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH bucket-type sand washers are designed to effectively separate clay, dust, and foreign matter from aggregate materials, thereby improving material quality. Their durable construction and simple design ensure both long-lasting use and easy maintenance. The bucket system consumes minimal energy while washing the material through water circulation and significantly reduces water consumption. This provides an environmentally friendly solution and lowers operating costs. Standing out for their ease of installation and use, CONSTMACH bucket (Wheeled) sand washers are an ideal choice for improving aggregate quality in stationary or mobile crushing and screening plants. CBW-80 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 5.5 kW Capacity: 80 – 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 CBW-100 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 7.5 kW Capacity: 110 – 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 Fpodjxpyfvepfx Aatsl Why Choose CONSTMACH Bucket Washers? CONSTMACH is a leading brand offering reliable, efficient, and long-lasting solutions in the stone crushing and screening industry. Manufactured to high engineering standards, our bucket (Wheeled) sand washer models stand out with their minimal maintenance requirements, low operating costs, and high performance. Our professional approach to spare parts supply, technical support, and after-sales service ensures maximum efficiency for our users. By choosing CONSTMACH bucket washers, you can increase quality in your production processes and gain a sustainable production advantage by saving energy and water. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Bacci Lignum horizontal drilling machine with oscillation, pneumatic table, adjustable Fpodpfxswyghbe Aatol

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 5-axis machining center Hedelius ACURA 65 Fsdozwuq Nepfx Aatspl Control system: TNC 640 Year of manufacture: 2017 Internal machine number: 72 Travel ranges: X-axis: 700 mm Y-axis H / V: 650 / 465 mm Z-axis: 600 mm Rotary tilting table: Ø 650 x 540 mm Tilting range: +30° to -115° Interference circle diameter: Ø 700 mm Table load: 500 kg Tool holder: DIN 69893-1 HSK-A63 Tool magazine: 65 stations Spindle speed: 50 - 18,000 rpm ZeroClamp, 4-fold 3D measuring probe M&H 25.50 5-axis simultaneous machining ACURA Handheld control unit HR 250 3D mold making alignment ACURA KinematicsOpt TNC640 Collision monitoring ACURA/TNC Compressed air at the spindle head Coolant system 1250l, 25 bar Chip conveyor Exhaust filter Laser light curtain for tools ACURA

Condition: repair required (used), Year of construction: 1999, functionality: limited functionality, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 40, Hedelius BC 80 This machine was primarily used for pre-milling operations at our facility until January and is currently out of service due to a hard drive malfunction. It has a Heidenhain control system, and the 4th axis is prepared but has never been installed. The drives were functioning without any issues; however, the spindle makes noise at higher speeds. As we need the space for our assembly operations, we are offering the machine for sale. Fodezx Ecxopfx Aatepl Our asking price, ex works, is 6,000.00 Euros.

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. 380V, 1400 and 1800W through the 2 speed ranges. 1400 and 2850 rpm. Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. Fjdpfx Aajyy Rtzjtspl The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Comes with manual. We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH bucket-type sand washers are designed to effectively separate clay, dust, and foreign matter from aggregate materials, thereby improving material quality. Their durable construction and simple design ensure both long-lasting use and easy maintenance. The bucket system consumes minimal energy while washing the material through water circulation and significantly reduces water consumption. This provides an environmentally friendly solution and lowers operating costs. Standing out for their ease of installation and use, CONSTMACH bucket (Wheeled) sand washers are an ideal choice for improving aggregate quality in stationary or mobile crushing and screening plants. CBW-80 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 5.5 kW Capacity: 80 – 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 CBW-100 Bucket (Wheeled) Sand Washer Technical Specifications Fpodpexp Urwjfx Aatjl Motor Power: 7.5 kW Capacity: 110 – 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 Why Choose CONSTMACH Bucket Washers? CONSTMACH is a leading brand offering reliable, efficient, and long-lasting solutions in the stone crushing and screening industry. Manufactured to high engineering standards, our bucket (Wheeled) sand washer models stand out with their minimal maintenance requirements, low operating costs, and high performance. Our professional approach to spare parts supply, technical support, and after-sales service ensures maximum efficiency for our users. By choosing CONSTMACH bucket washers, you can increase quality in your production processes and gain a sustainable production advantage by saving energy and water. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Condition: good (used), Continuous Barrel Washer a robust, high-capacity washing solution designed for the efficient cleaning of root vegetables and produce in continuous processing lines. Fodpfxozzpr No Aatepl

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm Fjdpfx Asznwu Soatjpl - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: used, Year of construction: 1976, x-travel 1200 mm y-travel 400 mm z-travel 460 mm table-size 1500 x 400 mm control konventionell tool adaptor SK40 turning speed range 45 - 2000 U/min quill stroke ja mm weight of the machine ca. 3,2 t dimensions 2,8 x 2,5 x 2,1 m Equipment: - ELESTA digital display - Infinitely variable feed - Coolant system - Horizontal milling attachment - Chip guard - Chip trays Fedezip H Nopfx Aatepl - Hydraulic machine vice - Machine light - Documentation

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 11045529844, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 20,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 20,000 mm, nominal power (apparent): 50 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,700 mm, total length: 6,500 mm, total width: 3,000 mm, table width: 380 mm, table length: 500 mm, overall weight: 7,000 kg, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, Equipment: chip conveyor, DECKEL MAHO DMU 50 EVOLUTION CNC Universal Machining Center - Tool holder: SK 40 - Resolution of the linear measuring system X/Y/Z: 0.001 mm - Positional tolerance in X/Y/Z: 0.010 mm - Max. tool length from spindle nose: 280 mm - Max. tool weight with automatic tool change: 6 kg - NC rotary table with swivel axis, clamping area: 500 x 380 mm - Distance between T-slots: 63 mm 14 H 7 - Centering bore: 30 mm - Swivel speed: 26 rpm - Swivel range: 180° - Input and display resolution: 0.001° - Max. weight: 330 kg - Includes three-jaw chuck, diameter: 250 mm - Includes the tool holders located in the tool changer - Includes chip conveyor and coolant system Note: the machine can be transported on a standard truck! Fodpezxyuisfx Aatopl FCA D-63843 Niedernberg - loaded onto a truck

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Fpjdpfx Aszmyzfeatol

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC Fpjdpfx Aaew U Sf Tstel

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 420 kg, iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, stainless steel band saw blades 10 x 0.4 – 35 x 0.8 mm, band knives 10 x 0.4 – 40 x 0.8 mm, strip steel 7 – 100 mm2 cross-section (stainless up to 50 mm2), band thickness 0.4 – 2.5 mm, clamping width 60 mm. The machine is used, in working condition and repainted. Electrical cabinet, hydraulics and controls are shown in the photographs. Machine weight approx. 420 kg net / 480 kg gross, packing dimensions approx. 1150 x 1150 x 1150 mm. Make and Model: iDEAL BAS 065-11 Year of manufacture: 2008 Serial no.: 235529 Clamping: hydraulic, foot switch operation Max. upsetting force: 50 kN Voltage: 400 V Frequency: 50/60 Hz Power: 20 kVA (at 50% duty cycle) Secondary voltage: 2.5 – 4.0 V Fuse protection: 20 A Bi-metal band saw blades: 10 × 0.7 – 41 × 1.6 mm Wood band saw blades: 10 × 0.7 – 60 × 1.0 mm Stainless steel band saw blades: 10 × 0.4 – 35 × 0.8 mm Band knives: 10 × 0.4 – 40 × 0.8 mm Fsdpfxezz Sdzo Aatopl Strip steel, cross-section: 7 – 100 mm² (stainless up to 50 mm²) Band thickness: 0.4 – 2.5 mm Clamping width: 60 mm Machine weight: approx. 420 kg net / 480 kg gross Packing dimensions: approx. 1150 × 1150 × 1150 mm Condition: Used, in working order

Condition: like new (used), Year of construction: 2020, operating hours: 9,000 h, functionality: fully functional, MG MORI DMC 1150 V Year of manufacture: 2020 Machine type: CNC vertical machining center Travel distances X-axis: 1,150 mm Y-axis: 700 mm Z-axis: 550 mm Rapid traverse: 42 m/min Direct linear scales in X / Y / Z Work table Table size: 1,460 × 750 mm CNC control HEIDENHAIN TNC 640 3D control DMG MORI ERGOline Control 19" screen Main spindle DMG MORI speedMASTER Tool interface: HSK-A63 Speed range: 20–20,000 rpm Spindle power: 35 kW / 25 kW Torque: 130 Nm / 86 Nm Values specified at 40 % / 100 % duty cycle Fpsdpfezzm Dpsx Aatel Active spindle cooling Tool magazine 60 tool positions HSK-A63 Chain magazine Carousel Dual gripper Direct manual tool loading into the magazine Coolant / MQL Internal coolant supply Coolant through the spindle MQL 40 bar Paper band filter Tank capacity: 600 liters Chip conveyor Machine bed flushing Extended machine bed flushing Additional flushing bar on the right side wall Flushing volume manually adjustable Flushing gun for chip removal Enclosure roof Workpiece measurement technology Infrared measuring probe HEIDENHAIN TS 460 Automation DMG MORI PH 150 Pallet loading and unloading system Handling system with pallet magazine Round magazine 2 servo axes: X-axis Magazine table Z-axis pneumatic Gripping arm / fork IPC with touch panel DMG Automation Jobmanager OMRON package Graphically supported operator guidance PROFIBUS interface Automatic loading door on the right side of the machine PROFIBUS communication during the loading cycle 2-channel safety circuits Electrical automation interface version 4.0 4-color signal light Pallet system PH 150 basic round magazine: 10-position System expanded to pallet size: 500 × 500 mm In this configuration: max. 4 pallet storage locations Handling weight expanded to max. 250 kg per pallet incl. load EROWA zero-point clamping system EROWA UPC pneumatic zero-point clamping system Connection coupling on the table 2 active pneumatic lines Pneumatic release via 6 bar system pressure Pressure increase to 7.5 bar EROWA MTS clamping system Zero-point clamping station EROWA MTS Adapter plate: 410 × 410 mm 4 clamping elements Pitch: 250 × 250 mm Pallets 4 × EROWA MTS pallets Pallet size: 498 × 498 mm Pitch: 250 mm Incl. clamping studs and coupling Surface smooth Material: Aluminum The complete photo gallery is provided exclusively upon request. A sale to dealers is currently not possible. The complete order confirmation via DMG MORI will also be sent to you upon request.

Condition: used, Year of construction: 2024, functionality: fully functional, For sale: a business with 30 years of experience in concrete casting, consisting of silicone molds for cement or gypsum facade cladding, a machine for pressing paving slabs, polyester and silicone molds for the production of statues, fountains, planters, balustrades, and many other garden ornaments and figures. The sales package also includes the technology for making the appropriate product, depending on the type and wear of the concrete mold. For more information, please contact Hristo Hristov. Fsdpfx Aaoy Hwm Ustopl

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 500 kg, 📄 Product Description Fpedpfxexnizds Aatel The Tongtai SH-5000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Strokes on X/Y/Z: 730/730/830mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Acceleration (X/Y/Z): 9.8 m/s Spindle Speed: 15,000 rpm. Tool Capacity: 60 pieces (upgraded from standard 40). Chip-to-Chip Time: 3.6 s (at 1,800 rpm). Pallet Dimensions: 500 x 500 mm. Max. Workpiece Height: 1,000 mm. Max. Rotation Diameter: 500 mm. Max. Table Load: 500 kg. Automatic Pallet Changer (APC): Included, with a 7 s changeover time. Machine size (Width x Depth x Height): 5,840 x 2,290 x 2,892 mm Machine weight: 12,400 kg. CNC Control: Siemens Sinumerik 840 D with 15" Display and Shopmill interface Internal Cooling: CTS (Coolant Through Spindle) at 70 Bar. Peripheral Equipment: Includes a Disc-type Oil Skimmer and an Oil Mist Collector. Energy Efficiency: Equipped with energy-efficient drives. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.