Used Pottinger Novacat 265 H for sale (56,043)

Condition: good (used), Countersink, countersink, deburring countersink Isdpjb A Rccjfx An Djia -Sizes: 2x20/2x30/3x45/4x60 mm -Countersink: 90° -Manufacturer: Bilz -Sale: only complete set -Weight: 5 kg

Condition: good (used), Pile Turner Toppy Twister 1000 AJ Silver h=2000 Fully operational, ready to work. Perfect condition. Year of manufacture: 2016. Made in Italy. This machine has an increased stack height of up to 200 cm. Equipment: Aeration, shaking, side margin. Technical specifications: Format: 1200×800 mm Stack height: 2000 mm Load capacity: 1200 kg Device weight: 1300 kg Power consumption: 9 kW Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, takes up little space. Iijdpfoyur Iujx An Dea Includes a ramp.

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 Spiral Casing Pumps in Process Design 1 unit has been fully overhauled; bearings in both the pump and the motor are brand new. The mechanical seal has been serviced by a professional specialist. All gaskets have been replaced with new ones. Pump specifications: - Flow rate: 6 m³/h - Delivery head: 25 m - Pump speed: 1440 rpm - Shaft seal: Double-acting mechanical seal - Seal manufacturer: Burgmann HRZ 13754-00 - Seal configuration: SIC/SIC/-CAR/SIC-VITON - Impeller type: Closed two-channel impeller - Impeller diameter: 277 mm - Bearing type: Rolling bearings - Impeller side: 1x NU411 - Drive side: 2x 7311 - Lubrication (drive side): Oil - Lubricant monitoring: Oil level regulator Materials: - Pump casing: Duplex steel Noridur 1.4593 (9.4460) - Wear plate: Duplex steel Noridur 1.4593 (9.4460) - Discharge cover: Duplex steel Noridur 1.4593 (9.4460) - Shaft: Tempered steel C45+N - Impeller: Duplex steel Noridur 1.4593 (9.4460) - Bearing bracket: Cast iron EN-GJL-250 - Shaft sleeve: Duplex steel 1.4462 Connections: - Inlet flange nominal bore: DN 80 - Discharge flange nominal bore: DN 40 - Nominal pressure, inlet: PN 10 - Nominal pressure, discharge: PN 10 Coupling: - Manufacturer: Flender - Coupling type: Eupex NH with spacer sleeve Baseplate: Cast iron Electric Motor: - Manufacturer: AEG AM 132 - Efficiency class: IE 0 - Motor speed: 1476 rpm - Frequency: 50 Hz - Rated voltage: 400 V - Rated output: P2 7.50 kW Iijdpfjiuznuex An Dja - Thermal class: F - Degree of protection: IP55 - Power factor cosφ: 0.82 Dimensions: - Length: 1270 mm - Width: 550 mm - Height: 570 mm - Weight: 300 kg Properties of material 1.4593 Noridur: Excellent for use in: - Chemical and process industries - Sulphuric and phosphoric acid applications - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and handling - Flue gas desulphurisation plants - Acidic, chloride-laden wash suspensions - Acidic process waters - Wastewater treatment/sewage plants - Offshore and marine engineering

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total length: 1,030 mm, total width: 450 mm, total height: 480 mm, 2 pieces horizontal, axially split volute casing pumps in process design, with radial impeller, single-entry, single-stage. ! Price per unit ! Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft sealing: Double-acting Burgmann mechanical seal with flush water connection and flow meter Impeller diameter: 169 mm Pump speed: 2,950 rpm !!! ATTENTION !!! Operating parameters listed on the nameplate. They do NOT indicate the actual duty point performance!!!! I have uploaded 2 characteristic curves as photos. Photo 11: Duty point Photo 12: Operating parameters from last application Flow rate: 6.9 m³/h Head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87% NPSH: 2.17 Operating data for last application (approx.): Flow rate: 2.2 m³/h Head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07% NPSH: 1.99 Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 5.5 kW Energy efficiency: IE2 Voltage: 400/690 Volt Speed: 2,950 rpm Material 1.4593 Noridur is highly suitable for: - Chemical and process industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and conveying - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology Iisdpefyn Rpofx An Dja ! Price per unit !

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 260 kg, total length: 1,140 mm, total width: 450 mm, total height: 525 mm, volume flow: 14.5 m³/h, final pressure: 2.2 bar, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,440 rpm, protection type (IP code): IP56, 2 units of horizontal, radially split volute casing pumps in process design, with single-inlet, single-stage radial impellers. ! Price per unit ! Manufacturer: KSB Model: CPKN-C3.1 040-250 Year of manufacture: 2009 Shaft seal: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: 260 mm Pump speed: 1440 rpm Please note: The nameplate indicates the parameters from the last duty point, not the pump’s design (best efficiency) point! Best efficiency point according to curve: Flow rate: 14.5 m³/h Head: 22 meters (2.2 bar) Shaft power: 1.85 kW Efficiency: 46.1 % NPSH: 1 m Duty point from last application: Flow rate: 6.0 m³/h Head: 24.0 meters Shaft power: 1.36 kW Efficiency: 30 % NPSH: 0.8 m Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 4.0 kW Energy efficiency: IE1 Voltage: 400/690 V Speed: 1440 rpm Material 1.4593 Noridur is ideally suited for: - Chemical and process engineering industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry Isdpfx Anjxp Eqke Deia - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and handling - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine applications ! Price per unit !

Condition: used, tank capacity: 20,000 l, GENERAL Equipment: Venting/inlet, spray head, crane lugs Design: upright Remarks: 1 tank with a small dent in the cylinder; manhole approx. 340 x 440 mm Internal diameter: 2,500 mm Total height: 6,750 mm Max. overpressure: 0.50 bar Agitator: agitator flange Support design: height-adjustable feet Location: Bremen Nameplate: Volume: 20,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,700 mm Last application: fruit juice industry TANK Specific gravity of medium: 1.37 (t/m³) Number of feet: 3 pcs EQUIPMENT Manhole / dome: in cylinder Outlet: pipe end approx. Ø 80mm Note: outlet end cut off MATERIAL SPECIFICATION Feet material: stainless steel Iiodpfxoxqc Uie An Dsa AGITATOR 1 Agitator arrangement: side-mounted on cylinder

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Disc valve Design: oval Iiedpfx Anoyckhpo Doa Remarks: 1 manway in the front end; Tank 1 with stacking device (can be used to stack Tank 2, which does not have a stacking device); the tanks were professionally cleaned and overhauled in 2024; brand-new residual drain valves (DN 50 DIN 11851 with disc valve; actual tank outlet with a smaller diameter – presumably DN 40) and manway gaskets were installed; Tank 1 without nameplate and with more significant dents in the shell (see photos) Overall width: 730 mm Overall height: 1,850 mm Overall length: 2,800 mm Location: Outdoor storage 89340 Leipheim Nameplate: Volume: 2,500 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last intended use: wine storage TANK Support type: feet Number of feet: 4 pcs MATERIAL SPECIFICATION Material of feet: stainless steel

Condition: used, Year of construction: 2005, total height: 1,200 mm, total length: 8,120 mm, total width: 850 mm, Weight: 1.240 kg - Year: 2005 - Documentation available: No - CE certificate present: No Ijdpfx Ansx A S Upj Doia - Serial number: 535 - Main motor power [kW]: 6.0 - Min. saw blade diameter[mm]: 500 - Max. saw blade diameter [mm]: 550 - Options: Automatic pusher system - Voltage [V]: 400 - Power [kW]: 6.0 - Transport dimensions: 8120mm x 850mm x 1200mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 1,550 mm, total length: 7,900 mm, total width: 2,350 mm, Weight: 1.500 kg - Documentation available: No - CE certificate present: No - Max. saw length [mm]: 6000 - Max. saw height [mm]: 230 - Input table length [mm]: 6000 - Options: Automatic pusher system - Transport dimensions: 7900mm x 2350mm x 1550mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iisdpfoxixh Aox An Dja Yorick Diebels

Condition: used, Year of construction: 2007, total height: 1,750 mm, total length: 1,000 mm, total width: 1,810 mm, Weight: 1.240 kg - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 100658 - Main motor power [kW]: 7.5 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Power [kW]: 8.0 - Transport dimensions: 1000mm x 1810mm x 1750mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iodpfewniuaex An Djia Yorick Diebels

Condition: used, Year of construction: 2001, Undercut cross-cut saw HM-D 6500-R Ijdpfxjwng Sis An Dsia Serial number: 319 Connection Voltage: 400V- 11KW Weight: 2450 KG Saw blade max: 550 mm Saw blade min: 500mm Bore: 30mm Length automatic feed: unknown - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 319 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Ferromatik mixing screw Ø 70 mm for IU2495 and IU2650- removed from Ferromatik K-Tec 450 - removed from IU2495 Isdeyxg Tbspfx An Doia - removed from running machine - fully functional- inlet: 69.80 mm - center: 69.80 mm - outlet: 69.80 mm - total length: 225.80 cmmanufacturer: Ferromatik Milacron

Condition: used, maximum load weight: 18,030 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 08/2022, loading space length: 9,410 mm, loading space width: 2,470 mm, loading space height: 3,050 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, H&W HWZPS24 Tridem Curtainsider (Jumbo) ----* CODEXL Certified (EN12642-XL) * Fixed front wall * Curtainsider tarpaulins on both sides Iiedpfx Ansy Dzgys Dsa * 2 storage boxes * Wheel chocks * Spare wheel * Fire extinguisher * Rear support stands ----* BPW axles with drum brakes * Wabco air system * Knorr TEBS braking system ----* Tire size: 435/50R19.5 * Technical gross weight: 24,000 kg * Unladen weight: 5,970 kg * Overall length: 11,650 mm ----?Vehicle number: 12002 ----Subject to errors and prior sale ----Advertising and various lettering have been digitally removed. -----We are happy to assist you with all formalities involved in purchasing a vehicle. Please let us know your wishes and suggestions, and we will take care of everything for you. Among other services, we can offer the following for an additional charge: - Trade-in of your old vehicle - TÜV/SP inspection - Complete export handling - Financing mediation - Application for export license plates - Vehicle delivery - Vehicle registration - Towing and vehicle transport ----?Your VTS Team

Condition: used, mileage: 1,88,765 km, power: 425 kW (577.84 HP), first registration: 05/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Long cab with sleeper, technically permissible gross combination weight of 68,000 kg, retarder, tipping hydraulics, tyres 385/65R22.5 - 315/80R22.5 approx. 60%. Iisdpfeyqb Atsx An Dea

Condition: used, mileage: 1,16,000 km, power: 390 kW (530.25 HP), first registration: 09/2023, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, Equipment: ABS, air conditioning, all wheel drive, Arocs 2653 First registration: km 6X4 Retarder AHK 50mm Euro 6e Air conditioning Meiller tipper !!!!! BORDMATIK !!!!! 100cm side panels Approx. 12 cubic meters ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/p?????/?????..... Roman We are happy to assist you with financing or leasing. Sales EU: net price upon presentation of company documents and VAT number VAT deposit 2000 € Our service for you: Iiodpfxsyc I Dze An Dea - Export license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation options - Transfer from Munich Airport or Passau station

Condition: used, mileage: 1,16,000 km, power: 390 kW (530.25 HP), first registration: 09/2023, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, Equipment: ABS, air conditioning, all wheel drive, Arocs 2653 First registration: km 6X4 Retarder AHK 50mm Euro 6e Iiodpfeyc I Duex An Dsa Air conditioning Meiller tipper !!!!! BORDMATIK !!!!! 100 cm side walls approx. 12 m³ ---- German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/p?????/?????..... Roman We will be happy to arrange financing or leasing for you EU sale: net price upon presentation of company documents and VAT number VAT deposit €2,000 Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich airport or Passau train station

Condition: new, For sale: professional centrifugal fan from the renowned German manufacturer ELEKTROR – Karl W. Müller. This unit is suitable for applications such as ventilation systems, dust extraction, air transport in industrial installations, paint shops, woodworking shops, and production machinery. The fan is in very good visual and technical condition – solid, heavy-duty construction. Iedpfxoyuqrle An Dsia Technical data: • Manufacturer: Elektror • Model: RD 06 • Motor power: 2.2 kW • Power supply: 230 / 400 V • Speed: approx. 2870 rpm • Frequency: 50 Hz • Airflow: approx. 3600 m³/h • Pressure: approx. 2550 Pa • Protection class: IP54 Rectangular inlet and outlet – dimensions visible in the photos.

Condition: new, For sale: new, unused KSB Etachrom B industrial pump – complete, in original packaging, with manufacturer’s documentation. The pump is designed for industrial and process applications – high-quality workmanship, made in Germany. Technical data (from the nameplate): Manufacturer: KSB Series / Type: Etachrom B Flow rate (Q): 18.0 m³/h Head (H): 45.0 m Impeller diameter: Ø 181 mm Rotational speed: 2904 rpm Operating pressure: PN10 Medium viscosity: 1.0 mm²/s Year of manufacture: 2023 Made in Germany Certifications: CE, EAC, UKCA Condition New – ex stock Never commissioned Original box Operating/installation manual included Condition exactly as pictured Applications Industrial installations Process systems Ijdpfeyhhqxex An Dsia Cooling, process water Technical and production installations

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. Iodsy A N H Sopfx An Deia - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Iodpfxjy A N Hfe An Djia Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. Ijdpfey A N Ehjx An Djia - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. Ijdpfxsy A N D Ro An Dsia - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: Ijdpfey A N A Tox An Djia €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. Iodpfoy A H U Hsx An Djia For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2631.00 net + legally applicable VAT. Iisdpfx Aoy A H Uyjn Dja You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Delivery is possible on request at a reasonable price.