Used Pottinger Novacat 302 for sale (456)

Condition: ready for operation (used), Heidenhain UE 210D Converter ID: 558 302-01 SN: 23983188F – supplied with test protocol, professionally overhauled and fully tested with 3 months warranty, 100% functional, scope of delivery as shown in photos. Please note: In the exchange process, your faulty return unit must not show any mechanical damage such as breakage, as these are no longer repairable. In such cases, an additional invoice of €1,000 incl. VAT will be issued. Ksdpex Dwygjfx Adwowt Attention: You are bidding on a Heidenhain UE 210D inverter (ID 558 302-01 SN 23983188F) in an exchange procedure (exchange service), professionally overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per the photos. For both repair and exchange procedures, your defective exchange part must not show any mechanical damage such as broken components, as these cannot be repaired. In such cases, a surcharge of €1,000 incl. VAT will apply.

Condition: ready for operation (used), Heidenhain UE 210D converter ID: 558 302-01 SN: 23983188F – with test protocol, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. Ksdpfx Aex Dwyaedwowt

Condition: new, functionality: fully functional, machine/vehicle number: 131H1603, overall weight: 52 kg, total length: 660 mm, total width: 370 mm, total height: 333 mm, input voltage: 400 V, input current: 161 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, continuous power: 90 kW (122.37 HP), Equipment: type plate available, Exact type designation: Danfoss FC-302P75KT5E20H1BGXDXXSXXXXA0BXCXXXXDX Output power and output current: 90 kW | 177 A 131H1603 ° NEW in original packaging! ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the Quick Menu ° Original operating instructions for commissioning included Ksdpfx Aov Tw Umedwswt Only 2 units left in stock!

Condition: like new (used), operating hours: 3 h, functionality: fully functional, machine/vehicle number: 131H3091, input voltage: 400 V, input current: 96 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, continuous power: 55 kW (74.78 HP), Equipment: type plate available, Exact model designation: Danfoss FC-302P55KTE20H1BXXXXXSXXXXAXBXCXXXXDX Output power and output current: 55kW | 106A 131H3091 ° With test seal! ° Only 3 motor operating hours - according to the manufacturer, over 100,000 possible! Kwsdpex Hvuwsfx Adwst ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included Only 1 unit left in stock! The item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the visual condition. Fully functional and ready for immediate use.

Condition: excellent (used), mileage: 3,09,518 km, first registration: 10/2018, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 6,450 mm, loading space width: 2,500 mm, loading space height: 800 mm, Year of construction: 2018, operating hours: 788 h, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, soot filter, spoiler, trailer coupling, = Additional options and accessories = - Aluminum fuel tank - Power brake booster - Low noise emission - Speed limiter - Refrigerator - LED lights - Alloy wheels - Air suspension - Air horn - Particulate filter - Reversing camera - Sun visor - Stability control - Auxiliary heater - Toolbox - Power take-off (PTO) - Towing jaw = Further information = Axle configuration: Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; Steered Weights: Unladen weight: 16,875 kg Functional: Mast: Telescopic (7 sections) Mast length: 20.8 m Lifting capacity: 9,400 kg Lifting height: 2,080 cm Crane: HIAB X-HIPRO 302 E-7, year 2018, mounted behind the cab Superstructure brand: HIAB X-HIPRO 302 E-7 CE marking: Yes Condition Technical condition: Very good Optical condition: Very good Financial information Price: On request MAN TGX 35.500 8X4 TRIDEM + HIAB X-HIPRO 302 E-7 CRANE EURO 6 | PACKAGE | 500 HP DRIVE 8X4 TRIDEM LAST AXLE IS LIFTABLE AND STEERABLE WHEELBASE 420 CM AIR SUSPENSION TGX SLEEPER CAB WITH AIR CONDITIONING, CAMERA, NAVIGATION, REFRIGERATOR AUTOMATIC TRANSMISSION TRAILER COUPLING TOOLBOXES ALCOA WHEELS Kwsdpfx Ajuxu S Rsdwot OPEN PLATFORM BODY WITH REMOVABLE ALUMINUM SIDE WALLS 645 CM X 250 CM X 80 CM LASHING EYES AND STAKE POCKETS HIAB X-HIPRO 302 E-7 CRANE 7X HYDRAULIC EXTENSIONS 2X OUTRIGGERS RADIO REMOTE CONTROL MAX LIFTING CAPACITY 9,400 KG MAX LIFTING CAPACITY AT 1,850 CM 920 KG MAX WORKING HEIGHT 20.8 METERS OIL COOLER FOR CRANE HYDRAULICS ONLY 788 OPERATING HOURS!!! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, Year of construction: 2023, functionality: fully functional, With our semi-automatic stretch wrapper, we enable you to wrap your pallets quickly and securely by machine. Semi-automatic stretch wrappers are particularly suitable if you have structured and clearly defined packaging processes. Turntable diameter: 1,500mm Ksdpfx Ader Nc Ttjwjwt Maximum load: 1,500kg Maximum pallet size: 800x1,200mm Maximum pallet height: 2,200mm

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 9911832, travel distance X-axis: 10,600 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 740 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,760 mm, total length: 11,900 mm, total width: 4,500 mm, overall weight: 10,500 kg, spindle motor power: 10 W, spindle nose: HSK F63, tool length: 150 mm, tool diameter: 20 mm, tool weight: 3,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, MECAL MC302 GEOS-5 5-AXIS MACHINING CENTRE, manufactured in 2014 in Italy, is designed for milling, drilling, tapping, and cutting of profiles made from aluminium alloys and plastics. The machine, equipped with top-quality components and innovative solutions, can process both on a single workspace and within two separate working zones, which significantly increases speed and production efficiency. Simultaneous machining in two working areas is possible thanks to the longitudinal worktable with a sliding machining station and chip conveyor. The MECAL machining centre for aluminium profiles achieves high structural rigidity due to its base made from high-grade steel tubes. During operation, the profile is held in place by special clamps with an independent power supply system, allowing for positioning and automatic repositioning of each individual clamp in a very short time. All 5 axes (X, Y, Z, A, C), driven by motors with digital systems, move along automatically lubricated precision guides. The MECAL GEOS-5 machining centre is offered with 3D software, providing a high level of programming flexibility, user-friendly operation, and an intuitive graphical interface. Technical specifications of the MECAL MC302 GEOS-5 profile machining centre: - Number of axes: 5 (X, Y, Z, A, C) - Y/Z axis travel: 1570/740 mm - Spindle tilt (A axis): ±120° - Spindle rotation (C axis): ±210° - Rapid traverse (X/Y/Z axis): 70/60/40 m/min - 3D graphical software - Tool magazine capacity: 18 - Maximum electrospindle speed: 24,000 rpm - Electrospindle power: 12 kW Kodpfxju Dl R Uj Adwjwt - Maximum blade diameter: 500 mm - Maximum diameter of side and end mill: 200 mm - Centralised lubrication

Condition: used, functionality: fully functional, machine/vehicle number: 31140745, Year of construction: 2023, operating hours: 940 h, load capacity: 3,000 kg, lifting height: 4,800 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,200 mm, fork length: 1,200 mm, drive type: Lithium-Ionen, Electric 4-wheel forklift Chassis number: 31140745 Load center: 500 Kwjdjxzvy Hspfx Adwot ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Refurbished without warranty Technical condition: Very good Front tire type: Superelastic Rear tire type: Superelastic Battery type: Lithium-ion Battery year: 2023 Sideshift, 3rd valve,

Condition: excellent (used), Year of construction: 2019, General information Field of application: Construction Reference number: 6 Weights Empty weight: 300 kg Functional CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 4,5 t - 9 t Reconditioned: Yes Delivery terms: EXW Transport dimensions (LxWxH): 1,2x0,8x0,6 Working pressure: 100-150 bar Required hydraulic flow: 80 l/min Strike count: 600-1400 Latest inspection: 2025-05-05 Production country: DE Additional information Please contact Ö. Inalkac for more information Kwedpsx Ezl Sofx Adwot Epiroc SB302 general overhauled/GENERALÜBERHOLT in top condition. This SB302 is with following NEW parts: Seal Kit, diaphragm, retainer pins, stop pin, bushing, chisel/tool, hoses and new painted. Atlas Copco, SB202, SB300

Condition: used, mileage: 5,81,000 km, power: 338 kW (459.55 HP), first registration: 09/2019, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, loading space length: 6,600 mm, loading space width: 2,470 mm, loading space height: 800 mm, Year of construction: 2019, Equipment: ABS, air conditioning, crane, Volvo FMX 460 / 8x4 Tipper 6,60 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2019 ? MILAGE: 581 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ? AIRCONDITION TIPPER: 660 x 247 x 80 cm (L x W x H) CAPACITY: 15 000 kg TOTAL WEIGHT: 32 000kg TIRE SIZE: FRONT: 385/65R22,5 BACK: 315/80R22,5 WHEELBASE: 460/135/145 cm SUSPENSION: FRONT: SPRING BACK: AIR CRANE: HIAB X - HIPRO 302 EP - 5 + REMOTE CONTROL Kwsdpfov Atmqox Adwot TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 72799

Condition: used, mileage: 3,57,399 km, first registration: 06/1973, fuel type: diesel, number of seats: 49, gearing type: mechanical, color: silver, brakes: retarder, +++restoration object+++ +++no vehicle documents+++ Engine: Mercedes Benz Gearbox: Switch Seats: 48+1 high/fixed safety * Retarder Passenger compartment * Luggage racks Exterior * Trailer coupling * Tachograph with windshield * Sun visor Kwjdpjtzhyrefx Adwet * Driver's door * Roof hatches Audio & Communication * Radio Miscellaneous * Twin tires Our internal vehicle number: 9918 Errors excepted. Pictures and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: new, Year of construction: 2024, functionality: fully functional, SEMI-AUTOMATIC TURNTABLE, FOR PALLET WRAPPING WITH STRETCH FILM Upward-downward carriage speed Top and bottom reinforcement wraps Film tension Table rotation speed Ergonomic carriage stop at the end of the cycle Upward-downward cycle Only upward cycle Manual cycle Self learning cycle Kwedpfsxwa I Hox Adwjt Altimeter and photocell delay 6 recordable programs N-Connect: remote wifi connection for machine total control

Condition: new, Frequency converter Manufacturer: Danfoss Ksdpfxshukxuo Adwewt Typ: VLT Automation drive FC 302 FC-302P7K5T5E20H1XGXXXXSXXXXAXBXCXXXXDX (P7K5) 7.5 KW / 10 HP, three Phasen 380 - 500 VAC, (E20) IP20 / Chassis

Condition: new, Frequency converter Kjdpfxohukxxo Adwswt Manufacturer: Danfoss FC-302P2K2T5E20H1XGXXXXSXXXXAXBXCXXXXDX Typ: VLT® AutomationDrive FC-302 (P2K2) 2.2 KW / 3.0 HP, Three phase 380 - 500 VAC, (E20) IP20 / Chassis

Condition: new, Motor power 1,1/2,2 kW belt opening 130 mm belt dimensions 350x32x2,5 weight 220 kg Speed 30/60 1/min. Cutting surface 0° 115 / 100 / 130x80 Cutting surface 45° right 100 / 85 / 90x80 Cutting surface 45° left 75 / 75 / 90x65 Cutting surface 60° right Cutting surface 60° left Description Manual crosscut saw for miter cuts from 45° right to 45° left, with high sawing power. Construction in sturdy cast iron, practical and safe for every cut. FALCON 352 is available in bench version or on stand (accessories). The machine is equipped with a two-speed - three-phase motor. On request, the machine is supplied with pneumatic vice (FALCON 352 MA, when the head is lowered, the vice closes automatically) This version is always supplied with stand. Basic equipment: clutch adjustable from the outside Blocking device with vice Sliding on prismatic guide with adjustable bar Fixed clamping of the vice with axial adjustment for clamping the workpiece in the immediate vicinity of the cutting line. Adjustable fixing of the degasser, made entirely of steel. Electric 48 V coolant pump for cooling and lubrication of the saw blade. Double spring for the return of the to fix the loading platform. The machine can be lifted. Endless worm shaft mounted on pair of bearings. Saw blade holding shaft mounted on off-center punch. 2 speeds 30 and 60 rpm. Vise opening 130 mm Machine is supplied without saw blade. Electrical equipment: Electrical control panel marked cable connections Kjdpfx Ascgrkyjdwewt main safety switch provided for padlock Emergency stop device Phase failure protection Speed changeover switch Thermal magnetic protection Undervoltage release Motor with IP 54 protection Low voltage system 24 Volt Electric coolant pump 48 V Motor 1,1/2,2 kW - 400 Volt For further technical data please refer to the attached PDF document.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 131G9799, input voltage: 400 V, input current: 647 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP54, year of last overhaul: 2025, continuous power: 355 kW (482.67 HP), Exact type designation: Danfoss FC-302P355T5E54H2XGC3XXSXXXXA6BXCXXXXDX Output power and output current: 355kW | 658A 131G9799 ° With TEST SEAL! Ksdpfx Asv Hbvuodwowt ° Easy to use thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included Only 1 piece left in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready for immediate use.

Condition: new, Year of construction: 2024, warranty duration: 18 months, RAPHA-SYSTEMS Handels-GmbH DANFOSS FREQUENCY CONVERTER Since 2023, we have been able to offer our customers new frequency converters directly from the factory. The following series are available: VLT HVAC Drive FC 102 VLT Refrigeration Drive FC 103 VLT AQUA Drive FC 202 VLT Midi Drive FC 280 VLT AutomationDrive FC 300 Voltage and power ranges: 3 x 200-240V...0.25-37kW 3 x 380-500V...0.37kW-1.1MW 3 x 525-600V...0.75-75kW 3 x 525-690V...1.1kW-1.4MW Protection classes: IP00, IP20, IP21, IP55, IP66 Options: EMC filter H2, H3, H4 Brake electronics, STO, feedback terminal Numerical control unit Kjdporrhc Nsfx Adwjwt Reinforced coating (3C3) Fuses, mains disconnector from IP21 DC link coupling from IP21 Digital interfaces (DeviceNet, LonWorks, BACnet, Profibus, Profinet, Modbus TCP, Ethernet IP) I/O options Ext. 24V supply 18 months standart warranty! The delivery time from the main warehouse is usually 2-3 working days within Austria (Germany and EU ~5 working days). In the event of a machine downtime or other emergencies, we also offer express solutions (delivery within 1-2 working days - Austria, Germany and EU). Ask us now! Search criteria: 131B4207 FC-102P1K1T4E20H1XGXXXXSXXXXAXBXCXXXXDX 131B4217 FC-102P1K5T4E20H1XGXXXXSXXXXAXBXCXXXXDX 131B4218 FC-102P2K2T4E20H1XGXXXXSXXXXAXBXCXXXXDX 131B4219 FC-102P3K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX 131B3489 FC-102P3K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX 131B4220 FC-102P5K5T4E20H1XGXXXXSXXXXAXBXCXXXXDX 131B3603 FC-102P7K5T4E20H1XGXXXXSXXXXAXBXCXXXXDX 131F0427 FC-102P11KT4E20H1XGXXXXSXXXXAXBXCXXXXDX 131F6631 FC-102P15KT4E20H1XGXXXXSXXXXAXBXCXXXXDX 131F6632 FC-102P18KT4E20H1XGXXXXSXXXXAXBXCXXXXDX 131F6629 FC-102P22KT4E20H1XGXXXXSXXXXAXBXCXXXXDX 131B5945 FC-102P30KT4E20H1XGXXXXSXXXXAXBXCXXXXDX 131F6630 FC-102P37KT4E20H1XGXXXXSXXXXAXBXCXXXXDX 131F0340 FC-102P45KT4E20H1XGXXXXSXXXXAXBXCXXXXDX 131F0341 FC-102P55KT4E20H1XGXXXXSXXXXAXBXCXXXXDX 131F0342 FC-102P75KT4E20H1XGXXXXSXXXXAXBXCXXXXDX 131F0343 FC-102P90KT4E20H1XGXXXXSXXXXAXBXCXXXXDX 131L9216 FC-102P1K1T4E55H1XGXXOXSXXXXAXBXCXXXXDX 131L9217 FC-102P1K5T4E55H1XGXXOXSXXXXAXBXCXXXXDX 131L9218 FC-102P2K2T4E55H1XGXXOXSXXXXAXBXCXXXXDX 131L9219 FC-102P3K0T4E55H1XGXXOXSXXXXAXBXCXXXXDX 131L4961 FC-102P4K0T4E55H1XGXXOXSXXXXAXBXCXXXXDX 131L9220 FC-102P5K5T4E55H1XGXXOXSXXXXAXBXCXXXXDX 131L9221 FC-102P7K5T4E55H1XGXXOXSXXXXAXBXCXXXXDX 131L9222 FC-102P11KT4E55H1XGXXOXSXXXXAXBXCXXXXDX 131L9223 FC-102P15KT4E55H1XGXXOXSXXXXAXBXCXXXXDX 131L9224 FC-102P18KT4E55H1XGXXOXSXXXXAXBXCXXXXDX 131L9225 FC-102P22KT4E55H1XGXXOXSXXXXAXBXCXXXXDX 131L9226 FC-102P30KT4E55H1XGXXOXSXXXXAXBXCXXXXDX 131L9226 FC-102P30KT4E55H1XGXXOXSXXXXAXBXCXXXXDX 131B7008 FC-102P37KT4E55H1XGXXXXSXXXXAXBXCXXXXDX 131B7015 FC-102P45KT4E55H1XGXXXXSXXXXAXBXCXXXXDX 131B7025 FC-102P55KT4E55H1XGXXXXSXXXXAXBXCXXXXDX 131B8595 FC-102P75KT4E55H1XGXXXXSXXXXAXBXCXXXXDX 131B6204 FC-102P90KT4E55H1XGXXXXSXXXXAXBXCXXXXDX 131B8872 FC-202PK37T4E20H1XGXXXXSXXXXAXBXCXXXXDX 131B8880 FC-202PK55T4E20H1XGXXXXSXXXXAXBXCXXXXDX 131B8888 FC-202PK75T4E20H1XGXXXXSXXXXAXBXCXXXXDX 131B8896 FC-202P1K1T4E20H1XGXXXXSXXXXAXBXCXXXXDX 131B8290 FC-202P1K5T4E20H1XGXXXXSXXXXAXBXCXXXXDX 131B8906 FC-202P2K2T4E20H1XGXXXXSXXXXAXBXCXXXXDX

Condition: good (used), Year of construction: 2017, total width: 1,000 mm, total length: 1,450 mm, total height: 1,750 mm, empty load weight: 130 kg, input current: 16 A, HOBART Turbo Mixer. Model - PVM-302. BLENDER. Year of manufacture - 2017. Motor power (speed 1) - 0.75kW/1.0hp. Motor power (speed 2) - 1.85kW/2.5hp. Knife speed 1 - 680rpm. Knife speed 2 - 1450rpm. Sieve mesh size - Ø4mm / 8x8mm. 400V, 50Hz. Amps - 2.4A / 4.5A. Original price 134,000 DKK. Overall dimensions - Length - 1,724mm. Width - 587mm. Height - 1,821mm. Weight - 98kg. Shipping dimensions - L:145cm. W:100cm. H:175cm. Weight - 130kg. KLAR.25. Kjdpfx Aexlz N Iedwjwt

Condition: new, Year of construction: 1994, 30 mm 30 mm flat steel 50 x 10 mm Axis diameter 30 mm work speed 6,0 U/min roll diameter -toolpieces 132 mm total power requirement 0,75 kW weight of the machine ca. 0,25 Kg dimensions of the machine ca. 0,6 x 0,8 x 1,3 m Kedpfx Aswrzr Esdwswt Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Horizontal or vertical operation

Condition: like new (used), functionality: fully functional, Year of construction: 2022, * 80 hours * Quick coupler * As good as new * Operating weight: approx. 2,130 kg * Three-cylinder CAT C1.1 diesel engine (16.1 kW / 21.6 HP) Kwsdpfewlz D Uex Adwot * EU Stage V emissions standard thanks to optimized combustion process * Load-sensing hydraulics with flow sharing * Axial piston variable displacement pump for work equipment * Slewing gear and travel drive * 1st hydraulic circuit (AUX1) for hammer or tilt bucket (2-way hydraulics) * Operation via slider on the right joystick * Side-articulated boom operation via switch on the left joystick and slider * Electro-hydraulically proportionally controlled working hydraulics * Internally toothed slewing ring * Max. uppercarriage speed: 9.8 rpm * Automatic slewing brake * Hydraulically released spring-loaded brake as slewing gear parking brake * Monoblock slewing boom 1,850 mm (left) 65°/ right 50°) * Long dipperstick 1,160 mm * Hydraulically adjustable undercarriage

Condition: used, Year of construction: 1971, Manufacturer: ARO Model: M 302 Year of manufacture: 1971 No. 1063655 Voltage: 380 V ~ 50/60 Hz E 100 100 All information has been provided to the best of our knowledge. Errors excepted. This offer is directed exclusively at entrepreneurs within the meaning of § 14 of the German Civil Code (BGB). Kwsdpew S Ectsfx Adwet The sale is made with the exclusion of any warranty. This exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the seller's obligations, or from any injury to life, limb, or health. For further information, please visit the Witzenmann GmbH website under the sections "Imprint," "General Terms and Conditions (GTC)," and "Data Protection."

Condition: used, functionality: fully functional, overall weight: 20 kg, -KOM 3124- Kodpfxewl U Aqe Adwowt Offered here is a used Brinkmann submersible pump, model TA 302/250. The pump can be mounted directly on a tank. Dimensions: approx. (550 mm x 180 mm x 210 mm) Submersible depth: 250 mm Weight: approx. 20 kg Voltage: 230/400 V Frequency: 50 Hz Current: 4.3 / 2.5 A Speed: 2850 rpm

Condition: refurbished (used), The reconditioned vacuum pump is available from stock and ready for immediate use. We recommend that installation be carried out by trained personnel only. Adaptation material available on request. Oil filling: M-VAC 100 Technical data: 7.5 kW 3 x 190 - 208/380-415V/220-240V 50 Hz incl. gas ballast in B-cover Kwedpfjipu Umjx Adwot incl. level switch cooler reduced Ultimate pressure with open gas ballast: 1,5 mbar Ultimate pressure with closed gas ballast: 0.82 mbar Subject to prior sale! This offer is only valid for customers within Germany and European countries!

Year of construction: 2025, condition: as good as new (ex-display), SERVOCUT 302-MA Automatic abrasive cutting machine Kwodpfx Aocw Ipaedwjt - programmable with 7" touch screen operating panel with SIEMENS-PLC control - automatic moving table + manual chop cut (other types available) - cutting machine for a variety of different programmable cutting processes - programming of cutting parameters via LCD display - precise and motorized positioning of the sample in X - Y and Z axis - integrated moving table control with force-dependent adjustable infeed speed - variable cutting force, mode for pulse cut, overload protection of the drive motor - compact engine 2,800 rpm cutting disc speed - electronic braking system - cutting capacity up to 110 mm solid material (with cut-off wheels Ø 300 mm) - double, split (left/right) stainless steel T-slot table - floor assembly made of solid die-cast aluminum - incl. 80 l circulation cooling system complete with connection hoses - delivery ready for operation (without clamping devices) - power supply 400 V / 50 Hz, 3 phases with neutral 16 A back-up fuse - delivery including test equipment Consumables consisting of: * Assortment of 20 cutting discs with 300 mm diameter * 5 litre METCOOL coolant liquid

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), The METACUT 302 is the best value quality wet cutting machine available on the market for abrasive cuts. The cutting process is purely manual by operating the hand lever on the right side. The type METACUT 302 is able to cut solid materials with a diameter up to 90 / 110 mm (round) or 65 x 130 (square). In order to enable the cutting of extremely long workpieces, a lateral opening was created on the left side of the machine. The machines are equipped with a powerful motor that drives the abrasive cutting wheel safely through the workpiece. The base assembly of the machine consists of large die-cast aluminum housing. The clamping table made of stainless steel is equipped with T-slots, which allows a multitude of different clamping's. The optional quick-clamping devices can be disassembled to allow the installation of conventional clamping tools and thus the clamping of large or irregular workpieces. After only a few cutting attempts, the user is able to make perfect cut-offs with this easy-to-operate wet cut-off grinding machine to create the best conditions for the following grinding and polishing work to be carried out efficiently. Keywords: Manual, abrasive wet cut-off machine, 4.6 kW compact motor, electronic brake system, cutting capacity for solid workpieces with Ø ᐸ 90 mm (110 mm with cut-off wheel Ø 300 mm), for cut-off wheels with a Ø up to 250 / 300 mm, double T-slot table, floor assembly made of solid die-cast aluminum, powder-coated machine body, GRP plastic protective housing, 80 litre circulation cooling system with tank and pump included in the basic price. Delivery ready for operation (options: clamping device, base cabinet) Kwedpfo Ebqnsx Adwot Delivery including a test equipment consumables consisting of: * Assortment of 20 cutting discs * 5 litres METCOOL coolant Option: Machine base cabinet