Used Pottinger Terradisc 3000 for sale (6,110)

Year of construction: 2006, condition: ready for operation (used), Benninghoven MBA 3000 drying drum, year of manufacture 2006, including spare parts, drive motor, new chain, burner, Benninghoven, control system, and in good condition. Ltsdpfx Aox Nbx Heanea

Condition: excellent (used), Year of construction: 2000, overall weight: 2,000 kg, total length: 3,000 mm, Overhead Crane ABUS - VS 2t x 3000 Ltsdpfx Aaox Dkxisnsa MACH-ID 9306 Make: ABUS Type: VS 2t x 3000 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Machine is in a very good condition, works with no problem at all! Ltsdpfxeim Si Re Aanja Feel free to come and inspect machine under power upon appointment!

Condition: used, Year of construction: 2005, Processing size: 3000 x 1600 x 180 mm High-pressure pump 60 HP / 45 kW Model E-60 Operating pressure 4,130 BAR Water consumption 4.69 liters/min. Software: Watercad-CAM Automatic cutting optimization Storage location: customer Ljdpfx Aoxgfbqeanota

Condition: used, mileage: 8,52,923 km, power: 324 kW (440.52 HP), first registration: 05/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 26.440 6x4 | Crane with new UVV inspection | Well-maintained & ready for operation | Low crane hours Lodpfxjxxfl To Aansta This MAN TGS 26.440 is in excellent technical and visual condition. The crane has a new UVV safety inspection, new rear axle tires, and the vehicle has undergone a complete inspection. Clean appearance, operates perfectly – immediately ready for use. Highlights: * HMF 3000-K5 loading crane * New TÜV (roadworthiness) certificate * 440 HP, 6x4 drive * Crane system with current UVV safety inspection * New rear axle tires * Technically overhauled * Very well-maintained interior and exterior * Long-distance cab with 2 sleeper bunks * Air-suspended driver’s seat * Multifunction steering wheel * Air-suspended driver’s seat * Auxiliary heating/air conditioning * Pull-out fridge compartment * Radio * Navigation system * Stationary air conditioning * Electric mirrors and windows * Air horns * HMF 3000-K5 loading crane * Radio remote control For further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2024, According to our "General Terms and Conditions of Sale and Delivery," and without any guarantee or warranty, we can offer you the following vehicle today, subject to prior sale, errors, and typing mistakes, and non-binding until concluded: HAWE ULW 3000 Transfer Trailer Demo vehicle Year of manufacture: 2024 Low operating hours, mainly used for exhibitions Loading volume: approx. 38 m³ Rolling tarp Chassis suspension: mechanical leveling with parabolic springs Wheelbase: 1,810 mm Tyres: 710/50R26.5 BKT FL 630 Ultra, approx. 80% tread remaining Passive steering axle, hydraulically lockable Ltjdpsx Inn Sofx Aanoa Rigid drawbar K80 towing eye Hitch height: 600 mm Hydraulic support leg Operation type: manual operation using tractor control units LED work lights: interior, discharge area, and LED road lighting Camera system with 3 cameras: discharge spout position, internal rear wall, reversing camera PTO shaft connection 1 3/8", 6 splines Wide-angle PTO shaft: with wide-angle joint on tractor side Price: €99,000.00 (net) All information provided without guarantee or warranty. Our "General Terms and Conditions of Sale and Delivery" apply. Place of jurisdiction for both parties up to a disputed amount of €50,000 is the district court of Ludwigslust. For amounts exceeding this, the regional court of Schwerin has jurisdiction. Subject to prior sale, errors, and typing mistakes.

Condition: good (used), Year of construction: 1990, total height: 7,200 mm, total width: 4,200 mm, total length: 14,500 mm, throat depth: 700 mm, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Lsdpfx Aajx H Ixhsnsta Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: excellent (used), mileage: 7,98,895 km, power: 300 kW (407.89 HP), first registration: 01/2011, fuel type: diesel, tire size: 385/65-R22.5, axle configuration: 8x2, wheelbase: 6,700 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 9,600 mm, total width: 2,500 mm, Year of construction: 2011, Equipment: ABS, AdBlue, air conditioning, central locking, crane, electric window regulation, electronic stability program (ESP), fog lights, power mirror, soot filter, = Additional Options and Accessories = - Aluminum fuel tank - Leaf spring suspension - Brake booster - Windshield - Low noise - Cab - Air suspension - Air horn - Particulate filter - Radio/CD player - PTO (Power Take-Off) = Remarks = 2011 DAF CF85.410 with HMF 3000 K6 crane (6x extendable) + radio remote control (including charger / spare battery), HYVALIFT 26-ton hook lift for roll-off containers, 798,895 km, automatic transmission, air conditioning, 1x bed, radio / CD, Dutch registration with valid technical inspection (APK) until 12.01.2026. = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65-R22.5; Max. axle load: 9,000 kg; Steered; Tire tread left: 30%; Tire tread right: 50%; Suspension: Leaf spring Rear axle 1: Tire size: 385/55-R22.5; Lift axle; Max. axle load: 7,500 kg; Steered; Tire tread left: 30%; Tire tread right: 60%; Suspension: Air suspension Rear axle 2: Tire size: 315/70-R22.5; Twin tires; Max. axle load: 11,500 kg; Tire tread left inside: 25%; Tire tread left outside: 30%; Tire tread right inside: 50%; Tire tread right outside: 40%; Suspension: Air suspension Rear axle 3: Tire size: 315/70-R22.5; Twin tires; Lift axle; Max. axle load: 7,500 kg; Tire tread left inside: 40%; Tire tread left outside: 45%; Tire tread right inside: 60%; Tire tread right outside: 60%; Suspension: Air suspension Weights Unladen weight: 17,830 kg Payload: 17,670 kg Gross vehicle weight: 35,500 kg Functional Lifting capacity: 30,000 kg Lifting height: 2,000 cm Crane: HMF 3000 K6, year of manufacture 2010, mounted behind the cab Body make: DAF CE marking: yes Condition Technical condition: very good Optical condition: very good Identification Registration number: BX-XX-68 Further information Ltodpfxoxxmitj Aanja Contact Arne Honingh for more information.

Condition: good (used), Year of construction: 2003, machine/vehicle number: A 10371, Offer 25448 Technical Data: - Max. working width: 3050 mm - Max. cutting capacity (St 40): 0.5 – 6 mm - Cutting angle adjustable (motorized): 0.5 – 3° Lodjx I I Uxspfx Aaneta - Blade gap adjustment: manual - Number of hydraulic hold-downs: 18 pcs - Motorized backgauge with SP8 positioning control: 10 – 750 mm - Strokes per minute (depending on cutting angle and length): 9 – 17 strokes/min - Hydraulic drive: 400 V / 7.5 kW - Table height: 770 mm - Space requirement incl. backgauge, w/o front support arms: approx. W 3750 x H 1600 x D 2450 mm - Weight: approx. 4500 kg Includes: - Electric foot switch - Cutting line illumination - Angle gauge - 2 support arms - Rear area protection with side guard and light curtain

Condition: like new (used), Year of construction: 2019, SAMSUNG SMEC SL 3000 LM Lathe Year: 2019 CNC: Fanuc Series Oi - TD Equipped with driven tools 2 axial driven tools 3 radial driven tools Max. swing over bed: 650 mm Max. turning diameter: 430 mm Ljdpfxex Il Rds Aansta Max. turning length: 1,054 mm Bar capacity: 91 mm Spindle mount: ASA A2-8 Chuck diameter: 315 mm Max. spindle speed: 3,000 rpm Tool magazine: 12 positions (all driven) Travels: X: 230 mm Z: 1,100 mm Tool shank size: 25 x 25 mm Axial tool diameter: 50 mm Programmable tailstock Tailstock quill stroke: 100 mm Weight: 6,500 kg Chip conveyor Complete with full documentation

Condition: used, mileage: 8,52,923 km, power: 324 kW (440.52 HP), first registration: 05/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 26.440 6x4 | Crane with new UVV inspection | Well-maintained & ready for operation | Low crane hours This MAN TGS 26.440 is in excellent technical and visual condition. The crane has a new UVV safety inspection, new rear axle tires, and the vehicle has undergone a complete inspection. Clean appearance, operates perfectly – immediately ready for use. Highlights: * HMF 3000-K5 loading crane * New TÜV (roadworthiness) certificate Lsdpfjxul Erox Aaneta * 440 HP, 6x4 drive * Crane system with current UVV safety inspection * New rear axle tires * Technically overhauled * Very well-maintained interior and exterior * Long-distance cab with 2 sleeper bunks * Air-suspended driver’s seat * Multifunction steering wheel * Air-suspended driver’s seat * Auxiliary heating/air conditioning * Pull-out fridge compartment * Radio * Navigation system * Stationary air conditioning * Electric mirrors and windows * Air horns * HMF 3000-K5 loading crane * Radio remote control For further information, please do not hesitate to contact us.

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Ljdpfex Ih D Tsx Aaneta

Condition: excellent (used), Door closer, floor spring, locking body -Manufacturer: Geze, door closer Pendulo C, unused -Function: Swing door 90 DEGREES - only latching at 0 degrees - 90 DEGREES .: 3000-002336 H06-14-00-00 -Number: 47x door closers available -Price: per piece -Dimensions: 315/45/H65 mm Lsdpoxd Tzaefx Aansta -Weight: 1.3 kg

Condition: excellent (used), Year of construction: 2023, Mobile 3D coordinate measuring machine Camera, hand probe with display Max. Measuring length 10000/3500/3500 mm Ledpfxju S Rnls Aaneta Certified measuring range 3000/1500/1500 mm Triple camera Integrated measuring probe camera Measuring accuracy ±(28 + 5 L/1000) μm* Repeatability ±10 μm* Accessories

Condition: good (used), Standard equipment - Basic device profile projector Mitutoyo PJ 3000 - Ground glass D 300 mm with clamp for fastening of a radius template - Objective 10x and reflected light mirror - Measuring table with travel ... Ljdpfx Aajp H Ta Djneta a) MT X 100x Y 50 mm or 150x50 mm with glass plate - Illumination device for transmitted and reflected light (24V/150W) - Calibration protocol I Instructions D Delivery I Instruction I Factory and Daaks calibration possible

Condition: good (used), Year of construction: 2004, NAGEL/TBT BW-30-3000 Deep Hole Drilling Machine Year of manufacture: 2004 Control: SIEMENS SINUMERIK 840D Drilling depth up to 3,000 mm Drilling diameter max. 27 mm / min. 16 mm Axes: 3 Max. feed: 140 mm/min Table X-axis: 950 mm Working area in X-axis: 900 mm Working area in Z-axis: 1,750 mm Coolant capacity: 2,400 l Table load capacity: 4,000 kg Cooling system type: KA-1 Table size: 3,300 mm x 950 mm Feed rate up to 7,000 mm/min Ltedpfjx Hwhlex Aanea Power: N = 7.5 kW Speed: 650 – 6,500 rpm Automatic central lubrication Hydraulic drive for drill guide bush Magnetic chip conveyors All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery includes only those accessories which are expressly listed here, in the order confirmation, and in the invoice. FCA (Free Carrier – Loaded on Truck) D-95447 Bayreuth Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon conclusion of sale

Condition: used, mileage: 8,52,923 km, power: 324 kW (440.52 HP), first registration: 05/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, MAN TGS 26.440 6x4 | Crane with new UVV inspection | Well-maintained & ready for operation | Low crane hours This MAN TGS 26.440 is in excellent technical and optical condition. The crane has a new UVV safety inspection, the rear axle tires are new, and the vehicle has undergone a full technical check. Clean appearance, runs flawlessly – immediately ready for use. Highlights: * HMF 3000-K5 loading crane * New general inspection (TÜV) * 440 HP, 6x4 drive * Crane system with current UVV safety certification Lsdpfx Aasxtryyenota * New rear axle tires * Technically overhauled * Very clean interior and exterior * Long-distance cab with 2 bunks * Air-suspended driver’s seat * Multifunction steering wheel * Auxiliary heater / air conditioning * Extendable refrigerator compartment * Radio * Navigation system * Stationary air conditioning system * Electric mirrors and windows * Air horns * HMF 3000-K5 loading crane * Radio remote control For further information, please feel free to contact us.

Year of construction: 2013, condition: ready for operation (used), An IPG laser source with peripheral equipment is available. 1) IPG Laser YLS-3000-CT, year of manufacture: 2013, wavelength: 1070nm, modulation: 0kHz-5kHz, power control range: 10%-100%, power stability: +/-1%. Machine dimensions X/Y/Z: approx. 800mm/800mm/560mm, weight: approx. 400kg. 2) Industrial chiller IPG Laser LC 170.01-A.3.5, year of manufacture: 2013, cooling capacity: 17kW, max. operating pressure: 28bar, refrigerant: R407C, refrigerant quantity: 3.5kg. 3) Wire feeder Dinse DIX WD 300, feed rate: 20m/min, wire diameter range: 0.8mm-1.6mm, machine dimensions X/Y/Z: approx. 300mm/250mm/250mm. 4) Laser process head. Documentation available. On-site inspection is possible. Ltedpox H S Nwsfx Aansa

Condition: used, overall weight: 5,000 kg, axle configuration: 2 axles, first registration: 05/1990, next inspection (TÜV): 06/2025, * Asphalt tank superstructure * Tandem axle * Air brake system Ltjdpfx Aaox I Uufensa * Rinner Attersee axles * Hydraulic pump ----Internal vehicle number: 11642-----Errors and prior sale excepted

Condition: used, Kinn Tanks 3000 Ltr hinten abgeschrägt Ledpfx Aex Iv T Ajanjta für Gewölbekeller v2aArmaturen innen v2 Platten Anzahl verfügbar: 10 Stück

Year of construction: 1998, condition: used, Technical details: temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm Ledpfju Rnd Djx Aansta total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is. *

Condition: used, Year of construction: 2021, turning diameter over cross slide: 440 mm, turning diameter: 680 mm, center height: 340 mm, turning length: 3,000 mm, total length: 4,700 mm, total height: 1,450 mm, spindle speed (min.): 1,000 rpm, metric thread diameter (min.): 14 mm, bed width: 458 mm, rotational speed (max.): 1,000 rpm, rotational speed (min.): 12 rpm, type of input current: three-phase, swing diameter over bed slide: 680 mm, overall weight: 4,500 kg, quill mount: MK 6, spindle mount: MK 6, center height over top slide: 220 mm, EQUIPMENT of the used machine Machine No. WAG-C1-188 year of construction 2021 STANDARD EQUIPMENT : - Complete electrical equipment 400 V. / 50 Hz. - Chuck protection electrically fused - Quadruple tool holder or optional Quick change tool holder (Multifix system) - Rapid traverse in X and Z axis - Fixed steady rest - Moving steady rest - Complete coolant system - Spindle brake - Rear chip guard - Machine light - Operating tool and instruction manual - CE standard Additional equipment of the used machine - Three-axis digital display Article 601233 - 3-jaw chuck diameter 400 mm - Faceplate diameter 500 mm - Fixed steady rest 70 - 250 mm - Fixed steady rest 150 - 380 mm Quill ends adapted for sliding inserts Article 601223 - Quick change tool holder head Multifix size C Article 605934 TECHNICAL DATA center height 340 mm Swing over bed 680 mm Lodpow Rpd Ejfx Aanota Swing diameter over cross slide 440 mm center width 3000 mm spindle bore 105 mm (option 155 mm) spindle nose ASA A1-11 (D-11) Number of spindle revolutions 12 spindle speed 12 - 1000 rpm. (opt. 10 -800 rpm for KK 15) Longitudinal feeds 0.05 - 0.7 mm/rev. transverse feeds 0.025 - 0.035 mm/rev. Bed width 458 mm cross travel 390 mm Top slide travel 255 mm Thread pitches: metric 0.8 - 14 mm Withworth Gg/1" 2 - 28 Module, mod. 0.5 - 7 Diametral Pitch, DP 4 - 56 Lead screw dia. 105 mm Number of stages 28 Tailstock quill MK6 Drive power 11,25 kW (opt. 15 kW) Transport dimensions 4700 x 1240 x 1450 mm weight 4500 kg Transport costs on request. You have the possibility to visit the offered machine in our demonstration center Renchen, by appointment.

Condition: used, Rotor width = 3000 mm Rotor diameter = 500 mm Ltjdpfx Ajww N Ekjanea Drive = 18.5 kW

Condition: new, 0 ja Working width 3000 (3500) mm 0 ja Ruchser RU-BM-3000 (option: 3500) Wing assembly table ----- Herstellerbeschreibung: Item 1.0 Article 0610000 RU-BM-3000 Sash assembly table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of working platform manually adjustable. Usable width 2500 mm Holder for hardware shears or hardware punch. 10 swivel-mounted pendants for hanging the sashes, completely pneumatically foldable for unhindered movement of the sashes on the table surface. Device for scanning the sash fitting length for constant and variable/centered handle fit and any handle fit height for pre-drilled sashes, colour-coded dimension recognition for the fittings. Pendulum height can be set to 50 or 60 mm on one stop. RU-SH, special screwdriver with pneumatic depth cut-off mounted on carriage, safety control, pneumatic height adjustment, screw feeder with automatic switch-off of the filling container manual insertion for a second screw length on the special screwdriver, accessories. RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4 commuter rail manually adjustable in depth against left and right one 4-fold turret stop each. PSF - Pneumatic clamping device for sashes against the lateral stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, sliding or brush strips should be used as a support. Item 1.1 Article 6315 RU-BM-... adjusted to customer's fitting specification Item 1.2 Article 0500000 Holder adjusted to customer punching press/ shear For mounting a customer-supplied punching press or shear (other manufacturer) on the sash assembly table. Please specify make when ordering !!! ----- Price RU-BM-3000 in the above version ex works: on request! ----- Fitting bearing options for RU-BM-3000: ----- Ljdpfx Ast Tq Aaoanjta Version with fixed fitting bearing: Price EUR 4,409.00 Article 0630000 RU-BL-30/30 Fixed fitting storage unit Mounted above the leaf assembly table Length 3100 mm, depth 1250 mm, with 3 shelves with 10 compartments each, divided by partitions. Freestanding version: Price EUR 5,291.00 Item 0710000 RU-SBL3000/30 Freestanding storage unit, Length 3100 mm, depth 1250 mm, height 2050 mm, upright frame on the front without supports, 30 compartments, 10 in a row, each divided by partitions and a continuous shelf at the top, size of the compartments: width 280 mm, height 150 mm 4 pcs. Angle supports for corner deflections: Price 614.00 EUR Side length 120x120mm; inclination approx. 3° The front edge of the angles is bent up 5mm to prevent accidental unloading. 2 pieces on the left and 2 pieces on the right under the first shelf of the fitting. ----- Surcharge for RU-BM-3500 ----- Article 0610300 RU-BM-3500 Sash assembly table for sashes up to max. 3000 mm height with RU-SH, special screwdriver length 3500 mm, width 1400 mm, inclination of working platform manually ble width approx. 3000 mm Surcharge RU-BM 3500 to RU-BM 3000: EUR 2,831.00 Fitting bearing for RU-BM-3500 (only free-standing possible): Price EUR 6,714.00 Item 0710007 RU-SBL3800/36, free-standing fitting storage Length 3800 mm, depth 1280 mm, height 2060 mm...

Condition: good (used), Movement range: 600mm Lodpfx Aaspy Dtxjnjta Platform size: 800x800mm Pedestal height: 870 mm