Used Pouch Making Equipment for sale (45,344)

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Fodezqt Dnepfx Adrjpk Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom Fpedpfozf Nk Tex Adrek PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, Our 400 Ton/Hour Capacity Stationary Crushing and Screening Plant consists of 40 m³ vibrating feed bunker, wobbler feeder, CLK-110 jaw crusher, impact crusher, tunnel systems, stock and return belts, stock bunkers, control cabinet and automation system. The products transferred to the feed bunker are separated from dirt and mud in the first stage of the double-stage wobbler feeder and bypassed by the bypass belt conveyor In the second stage of the wobbler feeder, the products that are suitable for the jaw crusher are sent to the stock area with the transfer belt. The jaw crusher, with a maximum feed of 800 mm, crushes the products and sends them to the fist vibrating screen. In the first vibrating screen, the products are separated in 0-40 mm, 40-90 mm sizes and sent to the stock area. Products above 90 mm size are transferred to the secondary crushing and screening unıt. The products transferred to the tunnel system are sent to the 12-13 S impact crusher. The products crushed in the impact crusher are separated in different sizes by vibrating screen and sent to the stock area. Fpsdpoy Db Rrefx Adrsk The products stored in the stock area are transferred to the pan feeder by passing through the tunnel system according to the need. The vibrating pan feeder transfers the products to the stock bunkers with the transfer belt conveyor All equipment of the crushing &screening plant is controlled from 3 different automation panels.

Condition: new, functionality: fully functional, power: 377 kW (512.58 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. Fullstar-60 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing Fullstar-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-90 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: - Model: Fullstar-90 - Production Capacity: 120-180 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 900x650mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1000 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1st Chassis: 1700x4500 mm : 2nd Chassis: 1550x4000 mm(Grizzly) ¬- Screw Washer Size: 600x5000 mm (Twins Helix) - Total Motor Power: 377 Kw - Generator (optional): 450 kvA - Plant Dimensions: 1st Chassis: 18960 x 4070 x 4650mm : 2nd Chassis: 15500 x 4650 x 4400mm FULLSTAR-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen Fpjdpfx Adjzd Nr Iorsk • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 560 kW (761.39 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. FULLSTAR 110 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing FULLSTAR-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-110 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: Fpedpfx Aezhuzpjdrek - Model: FULLSTAR-110 - Production Capacity: 200-300 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 1100x850mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1500 mm - Maximum Feeding Size: 800 mm - Vibrating Screen Size and Deck: 1st Chassis: 2200x5500 mm : 2nd Chassis: 1700x4500 mm(Grizzly) ¬- Screw Washer Size: 800x8000 mm (Twins Helix) - Total Motor Power: 560 Kw - Generator (optional): 700 kvA - Plant Dimensions: 1st Chassis: 22000 x 4700 x 4700mm : 2nd Chassis: 17500 x 4650 x 4600mm FULLSTAR-110 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 340 kW (462.27 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCK-90 is a middle model of MCK series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. MCK-90 includes two stages of crushing process which is made by primary jaw crusher and Secondary impact crusher. TECHNICAL SPECIFICATIONS: - Bunker: 20 m3 - Plant Dimensions (1st chassis): 11500x4600x4200 mm - Second chassis: 15500x4650x4400 mm - Production Capacity: 100-180 Tons Per Hour - 1st Crusher: Jaw Crusher – 900x650 mm - 2nd Crusher: Secondary Impact Crusher – 1120x1250 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1700x4500mm 3-4 decks - Total Motor Power: 340 Kw - Generator (optional): 450 kvA MCK-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) Fodpfx Adey Db T Terjpk FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 46,000 kg, Year of construction: 2026, *All of our products are carefully manufactured and have a 1-year warranty! *Installation and Operator Training are FREE! FTC-200-S Mobile Cone Crusher (With Screen); It consists of a feeding bunker, cone crusher and stock conveyor belt and generator. FTC-200-S Mobile Cone Crusher (With Screen), which is moved by remote control on a tracked chassis, successfully completes all commands given by the user by moving on its tracks in all kinds of difficult climate conditions and rough terrain. FTC-200-S Mobile Cone Crusher (With Screen), is precisely designed and carefully manufactured for stone crushing and is the leading mobile cone crusher in the sector with a crushing capacity of 100-200 T/H per hour. FTC-200-S Mobile Cone Crusher (With Screen) does not require an extra infrastructure as a production method, it is moved by remote control as mobile and adapts to all difficult terrain conditions. TECHNICAL SPECIFICATIONS: Model: FTC 200-S Crusher Type: Cone Crusher Fsdpszibdmsfx Adropk Vibrating Screen Size: 1300x3000 mm Production Capacity: 100-200 T/H Maximum Feed: 185mm Total Power: 300 kVA Weight: 46,000 Kg PLEASE CALL US FOR DETAILED INFORMATION!!!

Condition: new, functionality: fully functional, power: 280 kW (380.69 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE TECHNICAL SPECIFICATIONS: -Production Capacity: 200-450 Tons Per Hour -Crusher Type & Size: Turbo Impact Crusher – 1200x1200mm -Maximum Feeding Size: 700mm Fsdpfxszhi T Ho Adrepk -Total Motor Power: 280 kW MIC-120 is a combination of: • Bunker • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, Year of construction: 2026, The FABO FTT-100-S Mobile Tertiary Impact Crushing & Screening Plant is a tracked crushing solution designed for producing high-quality fine aggregates and manufactured sand. Combining a high-speed tertiary impact crusher with an integrated vibrating screen, it delivers excellent product shape, high production efficiency, and reliable performance in quarrying, mining, and recycling applications. Equipped with a PLC automation system, hybrid diesel-electric power unit, and heavy-duty tracked chassis, the FTT-100-S offers outstanding mobility, low operating costs, and quick setup on any job site, making it the ideal choice for demanding crushing projects. Technical Specifications Production Capacity: 180–250 T/H Fedezibd Hjpfx Adropk Maximum Feed Size: 120 mm Crusher Type: TK-65 Tertiary Impact Crusher Vibrating Screen: 1500 × 4200 mm Drive System: Hybrid Diesel-Electric Mobility: Tracked Chassis FABO – Quality Is Our Soul.

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 52,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-130 is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. Fsdpszd Nr Ujfx Adropk TECHNICAL SPECIFICATIONS: Model: FTI-130 Production Capacity: 400-500 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1270x1200 mm CSS Setting: 0-50 mm Total Power: 500 kva Weight: 52000 kg - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), ZNHZ-508A Envelope Making Machine Paper weight 70 – 150 g/m² Production rate 3000 – 9000 pcs/h Maximum folded envelope size Western Style 324 x 229 mm Min. folded envelope size 100 x 100 mm Power 8 kW Weight 3000 kg Dimensions 6600 x 1200 x 1300 mm Year of manufacture 2014. Key advantages of the machine: – A bottom-mounted vacuum feeder allows for continuous material loading without stopping the machine. – A proprietary adjustable creasing and perforation system on the machine cylinder allows for loading material in the form of only the cut-out envelope outline. – Simple and easy adjustments simplify and shorten makeready time. – Standard bookbinding glue is applied from an inkwell through rotating rings with precise adjustment of its position and intensity. – Glue for the closure is also applied from an inkwell with precise adjustment of the intensity. – A vacuum suction system located on the cylinders allows for perfect folding of envelopes even at very high speeds. Fpjdezl S T Rspfx Adrsk – The machine has two folding systems enabling double-closing of envelopes. – The electronic counting system is equipped with an electromagnetic separating device, allowing for separating envelopes, e.g., 50 pieces per envelope.

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Fedpfx Asq Ngafjdrjpk Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: new, Year of construction: 2026, functionality: fully functional, Ball Mill with Air Classifier: The Ultimate Powder Processing Equipment In the world of industrial powder production, precision, efficiency, and flexibility are paramount. Whether producing ultra-fine powders for high-tech applications or coarser materials for everyday products, the combination of a Ball Mill with Air Classifier offers unparalleled performance. This dynamic duo provides a comprehensive solution for industries ranging from chemicals and ceramics to paints, plastics, and pharmaceuticals. This article introduces the ball mill with an air classifier, explores its applications, and highlights the key advantages of this essential powder equipment. General Introduction to Ball Mill with Air Classifier ball mill with air classifier is an advanced grinding and classification system designed for efficient, high-quality powder production. The system consists of two main components: 1. Ball Mill: A cylindrical grinding device filled with grinding media (such as steel balls) that operates by rotating around its axis. The raw material is reduced to smaller particle sizes through impact and friction within the mill. 2. Air Classifier: A sophisticated device that separates particles based on size using airflow. Fine particles are carried away, while coarser particles are returned to the ball mill for further grinding. The combination of these two components creates a closed-loop system that ensures consistent particle size distribution, high efficiency, and minimal waste. Applications of Ball Mill with Air Classifier The ball mill with air classifier is a versatile solution used in a wide range of industries to process various materials. Key applications include: 1. Mineral Processing The system is widely used in the production of minerals such as calcium carbonate, quartz, feldspar, and talc. These finely ground minerals are essential for industries like ceramics, paints, plastics, and rubber. 2. Cement and Construction Materials Cement and other construction materials require precise particle size control for optimal performance. The ball mill with air classifier ensures uniformity and enhances the quality of construction materials. 3. Chemicals and Pharmaceuticals Fine powders play a critical role in the chemical and pharmaceutical industries. From active pharmaceutical ingredients (APIs) to industrial chemicals, this system delivers the consistent quality required for these applications. 4. Paints, Coatings, and Pigments The production of paints and coatings demands ultra-fine powders to achieve smooth finishes and vibrant colors. The ball mill with air classifier produces high-quality powders for superior results. #### 5. Food and Agriculture Fpedpfsvlwkxjx Adrek Food-grade powders such as additives, preservatives, and agricultural products like fertilizers can be efficiently processed using this system, meeting stringent regulatory requirements. Industries That Benefit from Ball Mill with Air Classifier Several industries rely on the capabilities of this system to produce fine powders with specific characteristics: - Ceramics: Produces high-purity powders for tiles, insulators, and advanced ceramics. - Rubber and Plastics: Creates fillers and additives for improved durability and performance. - Pharmaceuticals: Ensures consistent particle size for APIs and excipients. -Construction: Delivers materials for concrete, plaster, and other applications.

Condition: new, Year of construction: 2025, Introduction Of Jaw Crusher Plant The capacity vary according customer request. And in order to meet the different demands of customers, the production line can equip with cone crusher, dust removal equipment and other equipment. It is suitable for the materials like hard limestone, granite,basalt, pebble, metallurgy slag and artificial sand making work. It is widely used in the industries of hydroelectric, building materials, highway, and urban construction. And according to different technological requirement, various types of equipment can be combined to meet the demands of different customers. Product Advantages of Stone Crusher Machine Plant 1.High reliability, good stability 2.Convenient maintenance, easy operation 3.Low operation costs, wide application range 4.Laminating crushing makes good discharging grain shape We also provide other stone crushing solutions like 1. Vibrating feeder + Jaw crusher + Fine jaw crusher + Vibrating screen 2. Vibrating feeder + Jaw crusher + Impact crusher + Vibrating screen 3. Vibrating feeder + Heavy hammer crusher + Vibrating screen 4. Sand Production Line 5. Gravel / Aggregate production line A stone crushing plant for sand and aggregate production involves several stages and equipment. Here's an overview of the process and the main components involved: Process Overview 1. Primary Crushing: Large stones from the quarry are fed into a primary crusher, typically a jaw crusher, which reduces them to smaller, manageable sizes. 2. Secondary Crushing: The output from the primary crusher is further reduced in size by a secondary crusher, usually a cone crusher or impact crusher. 3. Screening: The crushed material is separated into different size fractions using vibrating screens. Oversized material is returned to the crushers for further reduction. 4. Sand Making: For producing sand, the material might be passed through a sand making machine, like a vertical shaft impact crusher, to achieve the desired shape and size. 5. Washing: The final product is often washed to remove impurities and improve the quality of the aggregate. 6. Stockpiling: The finished product is stored in stockpiles before being transported to customers. Main Components of stone crushing plant 1. Jaw Crusher: Used for primary crushing of large stones. 2. Cone Crusher or Impact Crusher: Used for secondary crushing to produce finer aggregates. 3. Vibrating Screen: Separates the crushed material into different size fractions. 4. Sand Making Machine: Special equipment for producing sand. 5. Belt Conveyors: Transport materials between different stages of the process. 6. Vibrating Feeder: Feeds raw material into the crushers evenly and continuously. 7. Sand Washer: Cleans the sand by removing impurities. 8. Control System: Manages the entire process, ensuring efficient and safe operation. Fjdpfx Ajq Nyy Eodrjpk Implementing a well-designed stone crushing plant can significantly increase production efficiency and produce high-quality sand and aggregate.

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. Fpsdpfjq Nd U Hsx Adrok When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Condition: used, machine/vehicle number: 92, Continous Form Collator Micro Pack S 50Serial-No. 92-164 / 1992/51/ mpkc 6 Stationen / Stations Fpedorbnnpopfx Adrok Format / Size max. 330 x 12 Zoll umstellbar bis auf 7 Zoll / convertible until 7 inch Standard 240 x 12 Zoll / inch Einlauf breite bis / Infeed width until 55 cm Crimpung alle 2 Zoll mit Ersatzmesser / Crimp every 2 inches with spare blade Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Fpjdjwl H Niopfx Adrek Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Label dispensing module for print integration, print module 4L300 thermal transfer printer, belt conveyor, see photos for details. Fpjdszn N Nnepfx Adrek

Condition: good (used), machine/vehicle number: 50264352686422, Year of construction: 2025, operating hours: 1 h, load capacity: 1,500 kg, lifting height: 200 mm, fuel type: electric, mast type: other, overall weight: 130 kg, enginetype: Electric, manufacturer: EP Equipment Fpedszp Ugbopfx Adrjk

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. Fodeyalqyjpfx Adrepk multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, functionality: fully functional, power: 196 kW (266.49 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. Fjdpezi Uyzjfx Adrepk MAIN FEATURES: * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Fpodpfezimbksx Adrsk Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: used, Year of construction: 2019, Vaupel Air Tower, manufactured by Gram Filter line with fan Type/Model: FL 52 / VE 5500 / W3 Fsdpfszhvvbjx Adrjpk Condition: Used Year of manufacture: 2019 Technical data Number of filter cartridges: 4 Number of solenoid valves: 4 G102 filter area: 52 m² G105 filter area: 84 m² Compressed air: 30 l/min Dust container: 35 l Weight: 630 kg Dimensions L x W x H: 1400 mm x 1200 mm x 2490 mm

Condition: like new (used), Cove Equipment Shredder Fjdpfx Aef N Nd Sedropk Model: SH-5 Stainless shredder, continuous process, ideal for chicken and pulled pork, 750Kgs per hour, 1Ph

Condition: good (used), Year of construction: 2014, 2x carton packaging machines, carton erectors, B&E Equipment / I-Pak – used: Price per unit, ex works: only €9,950 (net), with self-dismantling! Fodpfxszbyn Nj Adropk Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Each unit includes 1x Nordson ProBlue 4 hot melt adhesive applicator with 4-liter hot melt adhesive Weight: approx. 1,500 kg 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!