Used Power Supply Replacement Unit for sale (63,697)

Condition: as good as new (ex-display), Year of construction: 2025, Basically new machine, has run with us at the in-house exhibition ( 3 days ) 5 operating hours Technical data 300-P Suction port: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz Ibsdpfxobqache Aabec max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 165 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Ex stock 54634 Bitburg Immediately available subject to prior sale

Year of construction: 2020, condition: new, functionality: fully functional, Brand new in the box, never used. Please check out our other listings as well. Ibsdpjwiqggofx Aaboc

Condition: used, Hydraulic Power Unit ACME TYPE ZPR 6 Ref. No.: 962116 Year of manufacture: approx. 1972 Operating pressure: max 40 bar Flow rate: 10 litres/min. Tank capacity: 15 litres - In-line filter Motor power: 0.37 kW Ibedexf Uz Depfx Aabsc Power supply: 380 Volt, 50 Hz Installation dimensions (L x W x H): 500 x 270 x 500 mm Net weight: approx. 80 kg Test run with pressure test

Condition: used, Year of construction: 2013, Technical data: - Manufacturer: Berliner Luft - Year of manufacture: 2013 Ibodoxgh I Hspfx Aabjc - Model: RXL 30 - Duct connection: Suction 875x875 mm, Discharge 875x875 mm - Airflow: 30,000 m³/h - Heating medium: Hot water PWW 90/70°C - Heat output Q: max. 344.29 kW - Medium water: 4.24 m³/h - Connection diameter heating line: 1 inch - Motor power: 15 kW - Location: in stock - Voltage fluctuations: max. +/- 5 % - Without control cabinet Dimensions: - Length: 5,300 mm - Width: 2,000 mm - Height: 1,755 mm

Condition: ready for operation (used), Indramat TVM 2.1-50-220/300-W1-220/380 AC. Servo Power Supply, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Iodpfx Aji Ebrgjabjbc

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) Ibedpfx Aaowzyh Rebjc - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 160 P : - Intake port Ø: 160 mm Iodpfxebpg Ite Aabjbc - nominal motor power: 2,2 kW; 400 V/50 Hz - max. volume flow: 2000 m³/h - nominal volume flow: 1448 m³/h - negative pressure: 2503 Pa - filter surface: 9 m² - filter cleaning: Compressed air cleaning - Filling container (roll container): 241 litres - Dimensions ( L x W x H ): 1684 x 830 x 2050 - Weight: 288 kg - execution / operating side alternatively right / left Location: ex stock 54634 Bitburg Top price for the show piece

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, For sale: Eaton UPS, model 9390-80-N-4X0 – rated power: 80 kVA / 72 kW. The unit is offered without batteries, as these are installed in an external rack and will remain with the new device. The UPS is fully operational – all maintenance and inspections have been carried out exclusively by EATON’s authorized service team – service reports available upon request. In June 2023, a full overhaul was performed including replacement of: - 151101079001SP FAN 120x38mm 190CFM x 7 pcs - 101073677003 PCBAS 3P160 I/O POWER SUPPLY BOARD x 2 pcs - 1024460410SP PCBAS CONTROL BOARD II SP 9390 x 1 pc - 710B0234SP PCBAS ISBM INTERFACE BOARD (MCU) x 1 pc Iodpjwyb Rwofx Aabjbc Available end of November 2025 – being replaced due to increased capacity requirements.

Condition: used, HERION hydraulic power unit with hydraulic pump Hydraulic power unit Unit No.: 6352160 Year of manufacture: 1976 Operating pressure: 115 bar Flow rate: 4.5 litres/min. Hydraulic pressure (pump): max. 160 bar Motor power: 1.5 kW Tank capacity: 40 litres - 1 return filter - 1 pressure gauge 250 bar Ijdpfexf Uzqjx Aabsbc - 1 4/3-way valve HERION, type S10 B51 G013611 (24 Volt DC, 35 Watt) Space requirement (L x W x H): 600 x 400 x 600 mm Weight: 70 kg Very good condition Sold without oil

Condition: new, Design with bag filter Technical data: extruction nozzle 200 mm engine power S1 3 kW, 400V nominal flow rate 2262 m³/h Ibjdpfevrv E Iex Aabec max. volume flow 3010 m³/h cut surface vacuum measured with 2 m hose 2174 Pa filter area 13,7 m² filter dedusting compressed air residual dust content H3 (

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Hydraulic power unit by REXROTH, consisting of: hydraulic tank 250 l, electric motor 15 kW, REXROTH internal gear pump, HYDAC pressure accumulator, SCHMÖLE heat exchanger, temperature monitoring, hydraulic filter, return filter. Ijdpfx Asxb Ebtsabjbc

Condition: new, AL-KO POWER UNIT 250 P - Exhibition unit - Integrated pre-separator, integrated automatic extinguishing system ----- Technical Data ----- Extraction nozzle Ø: 250 mm, nominal airflow: 3,534 m³/h, max. airflow: 4,900 m³/h, max. negative pressure: 3,184 Pa, filter area: 22.4 m², chip collection volume: 2 x 250 liters, number of bags: 2 pieces, motor 400 V: 7.5 kW, dimensions (LxWxH): 2,351 x 1,058 x 2,361 mm, sound pressure level: 71 dB(A), weight: 758 kg, according to: GS - HO - new exhibition machine - Ijdswu Hatopfx Aabebc

Condition: new, Year of construction: 2025, Description: IE 3 motor standard max. volume flow up to 8.500 m³/h at the fan approx. 73 m² filter surface, residual dust content according to H3 Pre-separator standard 71 dB (A) at full load (according to DIN EN ISO 11201) already complies with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested back pressure flap Integrated automatic venting system Intake port: 350 mm Nominal motor power: 11 KW Voltage: 400 V/ 50 HZ Max. volume flow: 8500 m3/h Nominal volume flow: 6927 m3/h Negative pressure at Vnom. 2765 Pa Filter area: 73 m2 Ibjdpjcqy I Sjfx Aabsc Spa collection volume: (net/gross) 3x165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (LxWxH) 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock 54634 Bitburg

Condition: used, mileage: 18,892 km, power: 390 kW (530.25 HP), first registration: 11/2024, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 11/2025, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, electronic stability program (ESP), navigation system, parking heater, FT XF 530 NGD PXP All-Wheel Drive Chassis front design: Floor plate Main mirrors LED daytime running lights Rigid cab entry Air-suspended cab Sleeper High Cab Two LED spotlights for cab rear wall Headlamp washers Signal horns, 2 sets LED skylights, additional LED lights on cab roof, pre-installed Rear-view camera, pre-installed DAF Corner View LED headlamps and fog lights Cab interior trim: Hexagon Cabin wall trim: textile Driver-side roller blind Dashboard table Dashboard design: Vision Auxiliary heater with waste heat pump and timer Electric window lifters Pollen filter Driver’s seat, fixed pedestal Color scheme of interior trim: luxury Passenger seat, fixed pedestal Central storage compartment Leather steering wheel Electrically operated roof hatch Driver’s seat: Luxury Air Passenger seat: Cinema & Table, fabric upholstery Door panels: loosely woven fabric Xtra Comfort mattress for lower bunk Upper bunk Automatic cab climate control Safety nets on both bunks Curtains with partition curtain Refrigerator and drawer Armrests on both sides of driver’s seat Accessory power supply: standard + 2x 40 A LED interior lighting: luxury ECAS remote control with extended functions Adaptive Cruise Control with FCW and AEBS-3 DAF Connect Driver Performance Assistant Wireless charger Digital tachograph, VDO 1C, version G2V2 Toll system preparation Speed limiter setting: 90 km/h FMS connector, extended and pre-installed DAF Infotainment Luxury Plus, exclusive speakers Antennas: DAB-ready radio, 2x mobile, GNSS-extra: CB Electronic Stability Control (VSC) Alcohol interlock, pre-installed Lane change warning system Reversing warning device Turn assist system Main chassis switch Stabilink rear axle suspension Front leaf suspension: standard One ride height position, standard height Front axle 1, 8,000 kg, load index 156 Rear axle load capacity 13.00 t Axle load monitoring Front: 8.00 t, parabolic, 183N Rear: Air suspension SR1347 Rear axle 1, 13,000 kg, load index 149 Tire pressure monitoring system Front axle(s): 385/65R22.5 Driven rear axle(s): 315/80 R22.5 Alcoa Dura-Bright aluminium wheels 32 mm F1, 385/65R22.5GO OMTSHL 164/000 K Steering CBB 3P R1, 315/80R22.5GO OMTD 156/150 K Traction DBB Maneuvering mode Automated transmission, TraXon, 12 gears Automated transmission with manual shift – full version Ibedpfxexitmgs Aabjc ASR (traction control) Emission class Euro 6 Off-road use with rocking function Eco performance Rear axle ratio 2.69 Mechanical differential lock 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 MX-13 engine, 390 kW/530 hp, cab emblem: 530 Compressor 2-cylinder, without clutch Driven rear axle with disc brakes Pneumatic parking brake control ZF Intarder Front underrun protection Left fuel tank Side members 260/6.0 mm, without internal reinforcement 620 l aluminium left fuel tank, height 620 mm Access step walkway left LED work lights Wheelbase 3.80 m / rear overhang 0.99 m Right chassis side clear, 1700 mm Long walkway with step Aluminium air tank LED tail lights Exhaust pipe vertical, high EAS unit right, vertical + 80 l AdBlue fender left Kingpin diameter 2 inch Operation of fixed (non-sliding) fifth wheel Pneumatic connection for trailer, turntable coupling Fifth wheel mounting dimension 670 mm SAF S36-20, cast iron, 185+40mm, low maintenance Electrical connection trailer 24V/15-pin cable: 15-pin + EBS Body connector on chassis Chassis prepared with hydraulic...

Condition: used, Hydraulic Power Unit with Hydraulic Pump FRIEDRICH - REXROTH - HYDRONORMA Hydraulic unit type HY01 - PV2V3-30 / 12R1MC 63 A1 Year of manufacture: 1979 Pump operating pressure: 80 bar Pump flow rate: 14 liters/min (unloaded) Motor power: 1.5 kW Tank capacity: approx. 30 liters Power supply: 400 volts, 50 Hz - Silent power unit, space-saving design - Hydraulic pump BOSCH REXROTH type PV2V3-30 / 12R1MC 63 A1 Ibodpfjxf Uzkox Aabec - Solenoid valve BOSCH REXROTH 081WV06P1N112 - Return line hydraulic filter - Pressure gauge - Hydraulic tank with top lid for easy access - Electric switch for 2-way changeover Space required (L x W x H): 415 x 410 x 850 mm Net weight: 85 kg Good condition

Condition: new, Design with bag filters and integrated extinguishing device Ibjdpevr I R Ajfx Aabjc Technical data: extruction nozzle 250 mm engine power S1 6,5 kW, 400V nominal volume flow 3534 m³/h max. volume flow 4900 m³/h cut surface vacuum measured with 2 m hose 2740 Pa filter area 22,4 m² filter dedusting compressed air chip collection volume 2 x 250 l residual dust content H3 (

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity Ibsdpfxju R S A Rs Aabec - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: used, Hydraulic Power Unit, Hydro Unit BOSCH REXROTH Type Solo FD 101 Hydraulic Power Unit Year of manufacture: approx. 1980 Operating pressure: max. 115 bar Flow rate: 12 litres/min. Tank capacity: approx. 80 litres (with central oil sight glass) Motor power: 3 kW Power supply: 400 Volt, 50 Hz - BOSCH REXROTH hydraulic pump, type Solo FD 101 - 1 piece 5/3 way directional control valve, 24 Volt - 1 piece return filter - 1 piece pressure regulator Ibsdexf Uzdspfx Aaboc - Tank dimensions L/W/H: 650 x 400 x 470 mm - Connection fittings for hydraulic pipes 12L Required space L x W x H: 700 x 430 x 1300 mm Net weight: 130 kg in good condition

Condition: used, Hydraulic power unit with HILMA hydraulic pump Hydraulic power pack, hydraulic unit Type: 5034-4302 Operating pressure: max. 500 bar Flow rate: 1.2 litres/min. Motor power: 0.75 kW Tank capacity: approx. 4.5 litres Ijdpfjxf Uyyjx Aabobc Power supply: 400 Volt, 50 Hz - HAWE piston pump, type R 1.5 - 1 piece HAWE 2/2-way valve, type WGR 2-1 (230 V DC) - Pressure regulator Required space (L x W x H): 280 x 260 x 480 mm Net weight: 25 kg Good condition

Condition: used, Hydraulic unit, Hydraulic Power Unit VICKERS Order No.: 62357390 Year of manufacture: approx. 1985 Operating pressure main pump: 60 bar Flow rate main pump: 16 liters/min. Operating pressure cooling circulation pump: 5 bar Flow rate cooling circulation pump: 5 liters/min. Tank capacity: 160 liters Motor power: 2.2 kW Electrical connection: 400 Volt, 50 Hz - 2 hydraulic pumps (1x main pump, 1x cooling circulation pump) - 1 BOSCH accumulator, 2 liters - Pressure relief valve - Hydraulic filter - Cleaning cover Required space L x W x H: 1000 x 620 x 1100 mm Own weight: approx. 150 kg In good condition Ibodpfx Aoxf Uyasabsc

Condition: used, Hydraulic Power Unit, SPERRY VICKERS Hydraulic Power Pack Order No. 624186 Year of manufacture: approx. 1985 Operating pressure: 60 bar Flow rate: 6.5 liters/min Tank capacity: approx. 30 liters Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz Ibodpfx Aaoxf Ux Neboc - SPERRY VICKERS hydraulic pump, type GPA1-4-E - 2 solenoid operated directional valves SPERRY VICKERS, type DG4V-3-2C-UH-10-S300 Dimensions (L x W x H): 500 x 300 x 730 mm Net weight: approx. 70 kg Good condition

Condition: used, Hydraulic Power Unit ORSTA Year of manufacture: 1987 With 3 motors and various hydraulic circuits Tank capacity: 160 litres Pump power: 5.5 kW - 2 units of pressure accumulator, 160 bar, 25 litres each Ibedpfx Aaexcitpoboc - 1 electric pressure switch - 7 units of 4/2-way hydraulic valve with solenoid coil - 5 units of 4/2-way hydraulic valve with solenoid coils - Oil cooling with water cooler and electric pump for internal water circuit Dimensions (L x W x H): 1300 x 750 x 1700 mm Weight: approx. 400 kg Offered without oil content

Condition: used, Hydraulic unit DAIKIN KOGIO (Japan) Type Y475109 / TF 71 Operating pressure: 70 bar Flow rate: 12 litres/min. Tank capacity: approx. 70 litres Ijdpfsxcitiox Aabobc Motor power: 1.5 kW Electrical connection: 380 Volt, 50 Hz - 1 x pressure control valve - 1 x solenoid valve with 2 coils, 24 Volt - Pressure oil filter Required space: Length: 660 mm, Width: 500 mm, Height: 710 mm Net weight: approx. 120 kg

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Ibodpfst Awm Djx Aabec Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: used, Hydraulic unit, whisper unit BOSCH REXROTH Hydraulic unit Type UPE 5- /1.50V7/06-10A-H-1-S090+04100891 Factory no. R904100893 / 480933 10 Year of manufacture approx. 2010 Pressure output: 55 bar Delivery rate: 13 L/min. Tank capacity: approx. 20 liters Engine power: 1.5 kW Ijdpfx Aaev Ev Dqsbsbc Speed: 1440 rpm. Mains connection: 400 volts, 50 Hz - Unit was used for an operating pressure of approx. 80 bar - 1 hydraulic pump, vane pump BOSCH REXROTH, type PV7-11/06-10RA0MA0-10, pressure max. 100 bar - 1 air-oil cooler, fan cooling by electric motor from the hydraulic pump - Hydraulic block BOSCH REXROTH, type UPES-11/ ABZSS6-C-140E-S30-S13 - 2 hydraulic pressure accumulators - 1 replaceable filter cartridge - 1 pressure sensor IFM, type TR7 430 - 1 oil sight glass - Hydraulic connections 2x 18L - Sold without oil content Space requirement L x W x H: 700 x 450 x 850 mm Weight: 105 kg very good condition