Used Replacement Parts for sale (16,675)

Condition: used, Year of construction: 1997, Transnorm curved belt conveyor replacement part TS1500 RA2399 Technical data: Model: TS1500 Transnorm Item number: 6004-2RS 12 pieces inkluding: Bearing Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Fodpswc E Aiefx Aptjgg No information

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: TZ-JRT-30B-2800, Automatic log-cutting machine for toilet paper and hand towel cutting Fully automatic operation with advanced PLC control, LCD touchscreen, and servo motor. The machine is designed to minimize manual intervention, reduce labour requirements, and improve operator safety. The main operating parameters are set directly via the touchscreen PLC. The machine can be integrated with a converting and rewinding line for more efficient production. Designed for long-term industrial operation. Major components are imported, with the remaining components sourced from quality Chinese manufacturers. Technical Specifications Fgjdpfxjzxnmye Apteg Cutting diameter: 130–250 mm, adjustable via PLC Cutting length:50–380 mm, adjustable via PLC Maximum log length: 2,750 mm, adjustable via PLC Log lengths: Adjustable via PLC Cutting speed: Manually adjusted according to log diameter, thickness and cutting length Maximum stable operation speed: Up to 20 cuts/min for logs below 210 mm diameter and cutting lengths of 50–220 mm For cutting lengths above 220 mm: Automatic speed adjustment to approximately 10 cuts/min Automatic blade sharpening Automatic log loading/pick-up table Log storage rack with automatic feeding Automatic waste/reject removal via mechanical pusher (if using the push hand) Electrical connection: 3 × 400 V, 40 A Compressed air: 0.6 MPa Machine dimensions: 3,500 × 2,500 × 2,000 mm Weight: Approximately 3,000 kg (2 parts, cutter and the mechanical pusher) Country of manufacture: China Machine Condition The machine has been in operation at the factory and has been running without any major issues. Installation year 2020, running conditions about 7hrs /one shift. The following maintenance/repairs have been carried out: * Upper drive bearings replaced (2025) * Lower drive bearings replaced (2026) * Drive belts replaced (2026) * Damaged motion-control wiring repaired/replaced (2026) * Every 3-month inspection * Every 6-month lubrication of moving parts The machine is currently dismantled and stored in a dry warehouse. It can be inspected in its dismantled condition. Spare Parts Included Band saw blades: 4,400 × 70 × 0.65 mm price €105/pc, 9 unused blades, 1 sharpened and ready-to-work condition blade, 1 sharpened and ready-to-work blade (width narrow, still can cut most of the articles) Diamond grinding wheels: €80/pc, 1 spare New dust collector/vacuum system: €1,100 - purchased new but never installed (2-way suction and 1-way blown-in, with collection bin, direct attachment to the cutter) Other Information * Made in China - technical support within 24 hrs, spare parts in about 2 weeks. * Automatic operation * PLC + LCD touchscreen control (screen has original protection film still attached) * Servo-driven system * Suitable for toilet paper and hand towel logs * Suitable for integration into a converting/rewinding production line * Machine dismantled for storage Export outside the Baltic States Inspection possible by prior arrangement. Videos: youtu.be/8-xRCmvARYM youtube.com/shorts/vU4EunMEQt4 youtube.com/shorts/wwuV2Gp30AY youtube.com/shorts/WZjjokJjgZY

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 14764, Key operating data Motor power (standard): 5.5 kW Fsdpfxsztplgs Aptsgg Cutting diameter of the rotor: 300 mm Rotor width / cutting length: 125 mm Rotor speed: 230 rpm (slow-speed system for noise and dust reduction) Average output (throughput): 80 kg/h (depending on the type of plastic and the mesh size of the screen) Power supply: 3 x 400 V + N, 50 Hz Cutting system and working chamber Opening of the shredding chamber: 450 x 335 mm Opening of the feed hopper: 490 x 420 mm Number of rotating knives (on the rotor): 10 Number of fixed knives (on the stator): 2 Cutting geometry: Shear cutting with a slanted rotor, which facilitates the handling of three-dimensional parts Standard screen: Mesh size 6 mm (round, interchangeable) Particle size of the recovered regranulate: Standard 4–8 mm (depending on the installed screen) External dimensions and weight Machine length: 1100 mm Machine width: 900 mm Machine height: 2100 mm (for the version with a high stand frame for dust extraction) Total weight: 500 kg Additionally: new replacement knives, three screens with 5, 6 and 8 mm Cross magnet in the feed hopper!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.5 kW (12.92 HP), cutting height (max.): 260 mm, cutting width (max.): 260 mm, total height: 2,130 mm, total length: 1,670 mm, total width: 2,080 mm, overall weight: 2,200 kg, table height: 950 mm, Equipment: documentation/manual, lighting, A fully hydraulic production band saw machine, with a vertically running saw band, for 90° cutting of profiles, thin-walled and solid materials in all grades, including hard-to-machine materials such as Titanium, Hastelloy and Inconel. The standard Kasto Basic Control system provides optimal machine operation. Up to 99 programs can be programmed (length/quantity combinations). After the specified number is reached, the machine automatically shuts down. Precise material length positioning of the material feed unit via a ball screw. Frequency-controlled drive 5.5 kW, 0-start, protection in case of band saw breakage and clamping force control are part of the standard equipment and guarantee perfect operation for both single cuts and small to medium-sized series. The KASTO Universal Hydraulics ensures the best cutting results and a long service life of the band saw. Suitable for use with bi-metal and carbide band saws. Cutting capacity, round [mm] 260 Cutting capacity, square [mm] 260 Cutting capacity, bundle width [mm] 150-260 Cutting capacity, bundle height [mm] 0-200 Fgodpezz Ih Njfx Aptsg Smallest cutting dimension [mm] Ø 10 Smallest cutting short length [mm] 5 Clamping range [mm] 0-260 Length [mm] 1,670 Width [mm] 2,080 Height [mm] 2,130 Bed height [mm] 950 Weight [kg] 2,200 Total drive power [kW] 9.5 Power of saw motor [kW] 5.5 Automatic material feed length, single [mm] 600 Maximum material feed length [mm] 9,999 Minimum remaining piece length during manual operation [mm] 10 Minimum remaining piece length in automatic operation [mm] 110 Cutting speeds (infinitely adjustable) [m/min] 15  125 Cutting feed infinitely adjustable Material clamping hydraulic, infinitely adjustable Saw band guidance by carbide, replaceable Clamping force: Horizontal main clamping clamp (Sp I) [N] 1,100  6,800 Horizontal material feed clamping clamp (Sp II) [N] 1,100  6,800 Saw band dimensions [mm] 4115 x 41 x 1.3

Condition: excellent (used), Year of construction: 2000, operating hours: 25,943 h, functionality: fully functional, machine/vehicle number: 175, total width: 1,350 mm, total length: 1,400 mm, total height: 2,250 mm, grinding spindle motor power: 1,100 W, input voltage: 380 V, overall weight: 1,450 kg, grinding spindle speed: 2,625 rpm, The machine is in perfect working order and underwent a major overhaul in 2020, during which the following parts were replaced or added: - All axes were replaced (including guides, lead screws, all bearings, and supports). Fgodpfezxup Usx Aptsg - All gears and belts were replaced. - An automatic lubrication system was installed for all axes. - The internal lighting system was modified to highlight all sharp details. - LCD monitors were replaced. - The machine was fitted with an oil mist extractor. - Included is a replacement hard drive containing all the software.

Condition: good (used), functionality: fully functional, mileage: 13,790 km, power: 90 kW (122.37 HP), overall weight: 6,950 kg, fuel type: diesel, axle configuration: 2 axles, fuel consumption (combined): 10 l/100km, Year of construction: 1979, operating hours: 1,500 h, 1600 operating hours / total mileage 13,800 km! Fuel consumption approx. 10 l/100 km diesel. Front loader: Schmidt FL4 with quick-change bucket and pallet forks. It has spent almost its entire Unimog life stored indoors. Never driven in winter. Absolutely no rust on the underside. Engine: OM 352, 6-cylinder, 5638 cc, 95 hp, economical – approx. 10 liters per 100 km, smooth-running with an authentic, sonorous sound. A true "one-off". This vehicle has accompanied all of my construction projects without any technical failures — now the work is finished. Selling as a collector’s item or for continued use. Includes workshop manual. I purchased the Unimog from the original owner, so I am only the second owner, for the past 14 years. First registered in November 1979. I have only driven it about 2,000 km. Transmission synchronizer rings should be replaced. Permitted gross vehicle weight (GVWR) = 6.95 t (can be driven with an "old Class 3 driver’s license"). This registration is completely tax-exempt! "Self-propelled working machine / excavator." Annual costs only about €250 for insurance plus MOT, no emissions test (ASU) required. The vehicle is currently registered and in use / operational with MOT, everything works! Due to the 43-year service life, especially soft parts and rubbers tend to become brittle and were replaced: - Clutch master cylinder - Shift cylinder (small to large gear group) - 4/2-way valve - Cylinder head gasket The clutch housing is perfectly dry. Fgodszcmx Rjpfx Apteg

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Fjdjt Ity Djpfx Aptogg Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V

Condition: like new (used), functionality: fully functional, From a warehouse liquidation: Original Maho replacement parts for the DMP60/45Vlinear tool changer cover. A collection of grippers, levers of various development stages, cams, jaws, toothed parts, hydraulic rotary drives, magazine guides, etc. Fgjdpfx Apjzvff Ujteg

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, !!! Attention!!! We buy your functional or defective Hobart processing turbine, including accessories, and offer a repair service upon request. This is a processing turbine from the premium manufacturer Hobart, type PVM 302. It is a mobile, versatile turbo mixer for pureeing, mixing, chopping, emulsifying, stirring, etc. Ideal for use with vegetable, meat, and fish soups, sauces, vegetables (grated), mashed potatoes, yogurt, dressings, fruit and vegetable purees, liquid dough, baked goods, sorbets, and omelets. Compact dimensions and ease of use guarantee fast and cost-effective operation, even in confined spaces. The machine is equipped, as can be seen in the photo of the processing head, with the PVM 302 sieve insert with 4 mm holes. The PVM 302 has an integrated safety device that prevents automatic restart after a power failure or power cut. An electrical safety device ensures that the mixing head can only be operated when it is set to a height of more than 300 mm or less than 900 mm. The PVM 302 has been completely refurbished in our in-house workshop, and the following parts have been replaced: flexible shaft / bearing shaft / sliding ring seals / various ball bearings / 1 set of horizontal knives. The processing turbine is now in excellent technical condition. The unit can be inspected and demonstrated in our workshop. Upon request, we can also send a video of the unit. The fine sieve insert is included, as well as a grease gun for regular maintenance. See photos! Fodpfjzzw Ilsx Aptsgg Manufacturer's list price = €32,945 NET The machine is available immediately. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional. Flexible shipping or self-collection options. Competent advice - before and after the purchase. Provision of operating instructions, wiring diagrams & spare parts. Inspection according to DGUV V3. Technical data: Dimensions: in operation L x W x H = 1350 x 550 x 1500 mm in rest L x W x H = 1100 x 550 x 1700 mm Turbine speed / 1st gear 725 rpm / 2nd gear 1450 rpm Serial number: 94-842572 Year of construction: 2003 Condition: Used, refurbished, fully functional Machine design: Frame and all parts in contact with food made of chrome-nickel steel 18/9. The machine is mobile and equipped with 4 large rollers, two of which can be swiveled and locked. The machine is tilt-proof due to the rear outriggers. Machine with high-performance turbine and vertical and horizontal knife set; good chopping and pureeing performance. Turbine with intake protection ring. Power transmission via flexible shaft. The machine bears the GS/CE mark. Motor: Special motor, ball-bearing mounted, with motor protection switch and robust on/off switch, suitable for continuous operation. Turbine with two speeds. I. Gear 725 rpm (slow speed). II. Gear 1450 rpm (fast speed). Motor with fan cooling, protection class IP 54. Total connection value: 1.85 kW three-phase 400V/50/3 Fuse protection: 3 x 10 amps.

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose Fgjdoxwvruepfx Aptsg - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: used, functionality: fully functional, This is a handwashing and slop sink from the renowned manufacturer Blanco, in a robust design, not comparable to cheap manufacturers with inferior quality. You will receive an invoice with VAT shown. Our service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded appliances at fair prices Professional and competent advice – before and after purchase Free shipping within Germany (excluding islands/mountain stations) Provision of operating instructions, connection diagrams & spare parts Trade-in of your combination steam oven from model year 2004 onwards Complete range of accessories at attractive prices Fedpfx Aezz Ibpjptogg Condition: Used, fully functional Product description: W x D x H: 700 x 500 x 850/560 mm Sink size: Length: 340 mm Width: 240 mm Height: 150 mm Length: 370 mm Width: 340 mm Height: 150 mm Design: The handwashing and slop sink are arranged one above the other for space-saving reasons. Consisting of a compact, self-supporting construction, standing on four longitudinally seam-welded square tube feet (40x40x1.25 mm each). The ends of the uprights are equipped with height-adjustable plastic screws (+/- 15 mm) to compensate for uneven floors. Both sinks are fitted with three-sided stainless steel panels, with the cover of the handwashing sink arranged at an angle. The sinks are deep-drawn in a single process and seamlessly welded into the cover. The covers are bent over 50 mm on three sides. The handwashing sink is bent up 50 mm at the back with an outward flange. The slop sink is fitted with a raised profile edge (splash guard) all around. The handwashing and slop sink combination is equipped with plug-and-overflow valves 1 1/2″ and a support grid made of stable plastic (material: ASA). The water supply to both sinks is provided by a single-lever mixer tap 1/2″. Supply and drain lines as well as the tap are included separately and can be easily installed using the operating and installation instructions. Technical text HAU-P 5×7/ Version 3.0/ U. Herbstreith Technical data: Material: CNS 18/10 Material no.: 1.4301 Manufacturer: BLANCO GmbH + Co KG Type: HAU-P 5 x 7 Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (AGB).

Condition: used, Year of construction: 2014, operating hours: 17,000 h, functionality: fully functional, overall weight: 52,500 kg, With FABO Guarantee Purchased & Overhauled by FABO: The machine was purchased by our company and has undergone all necessary inspections. Comprehensive Maintenance: All service and maintenance procedures have been meticulously completed. Replaced Wear Parts: All worn-out wear parts have been replaced to meet original quality standards. Ready for Immediate Use: The machine is in stock and can be shipped to your construction site the same day it is purchased. Technical Specifications: Model: Sandvik QI441 Serial Number: 1884BG14205 Operating Hours: 17,000 hours Capacity: 300 – 500 tons/hour Crusher Dimensions: 1380 x 800 mm Motor : CAT 328 kW Weight: 52,500 kg Fsdozzc Rfepfx Aptjgg Year of Manufacture: 2014

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Fgedszxzagjpfx Aptjg Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² Fjdpfx Apewrp Emotegg - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2.7552.069, wire diameter (max.): 6 mm, power of the servo motor: 10,000 W, input voltage: 400 V, type of input current: three-phase, We are offering this very well-maintained Wafios BM 3 wire bending machine, manufactured in 1998, for sale. A tool set for 3 - 6 mm is included. Complete documentation is available. The PC has already been replaced. We mainly produced 3D parts from 3 mm material – brochure holders in all variations. Experts know what happens when you maintain the speed after the third bend... distortion. Therefore, this machine operated at a maximum speed of 15%. If you have any questions or require further information, please feel free to send us a message or call us. Fgodpfszvdd Ajx Aptog

Year of construction: 1986, condition: used, functionality: fully functional, Equipment: documentation/manual, BVL Rotocleaner 750 The cleaning and degreasing system with steam extraction fan and oil skimmer is in good used condition. Manufacturer: BVL Oberflächentechnik Year of manufacture: 1996 In 2011, the washing machine was completely overhauled, and the gear motor, heater, gas spring, and heating element were replaced. Automatic basket washing system with removable rotating basket. Basket diameter: 720 mm (internal diameter) Fgsdpfowzwfgjx Apteg Basket height: 140 mm (internal height) Maximum usable height (washing material): 450 mm Maximum batch weight: 500 kg External dimensions: Width 1190 mm, Depth 1170 mm, Height 1170 mm. Weight: 290 kg Operating manual, technical documentation, and CE declaration of conformity for the system are available. The housing of the cleaning system and the associated pipelines are made of stainless steel. Cleaning is performed using a special nozzle system with wide-band nozzles and a driven rotating basket. A U-shaped spray system ensures easy operation with high efficiency. The nozzles are supplied by a powerful circulation pump, which ensures intensive treatment and is equipped with a carbide mechanical seal. Heated tank in the lower part of the system. If the liquid level falls below a certain point, a fixed water connection ensures automatic refilling. This ensures safety for the heating elements and pump, as well as clean and precise dosing of the required amount of water. Internally located return baskets filter out coarse dirt from the washing liquid. A vapor extraction system removes steam before the hood is opened. The lid is supported by a gas spring. Easy-to-use filling system enables a fast workflow. Loading via crane is possible. Price: Negotiable Our asking price is €2,200.00 net ex works, plus packaging costs. All technical specifications are subject to printing errors and omissions. Sale is only to countries within the EU.

Year of construction: 2022, condition: used, functionality: fully functional, This is a hood-type dishwasher from the manufacturer Meiko, model Upster H500 M2, manufactured in 2022, including feed/discharge tables, spray arm, and mobile water softener. The machine has undergone a major inspection in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. The hood-type dishwasher has only 5388 operating hours and 9648 wash cycles and was used in a small company canteen that has since closed. You will receive an invoice with VAT shown. Fodjzzlntjpfx Aptjgg Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating manuals, connection diagrams and spare parts. Inspection according to DGUV V3. Technical data: W x D x H: 635(687) x 750(850) x 1470 mm, feed/discharge table dimensions: 1200 x 700 mm Basket size: 500 x 500 mm Passage height: 440 mm Program run time: 90 / 150 / 210 s Basket capacity: 40 / 24 / 17 baskets/h (theoretical) Tank capacity: 22.0 L Rinse water quantity: 2.6 L/wash cycle Total connection value: 10.6 kW Fuse rating: 20A On-site boiler heating: 7.50 kW / 10.82 A Tank heating: 2.00 kW / 8.70 A Wash pump: 0.75 kW / 4.60 A Degree of protection of the machine: IP X4 Condition: Used, inspected and fully functional. Your advantages: Simplest operation thanks to clear and easy-to-understand symbols Digital temperature displays for wash and rinse water 3 program run times Eco-filter system for best cleaning results through warmer and filtered tank water Machine and hood double-walled – ideal heat and noise insulation Hood open at the rear – prevents steam from bothering the operator Temperature-dependent extension of wash time – hygiene safety under all operating conditions Wash and rinse systems made of stainless steel Hood start automatic Including lye pump, pressure booster pump, as well as rinse aid and detergent dosing devices, basket equipment Optional: with built-in water softener EW 10 Standard equipment: Liquid detergent dosing device with suction lance for on-site storage containers Rinse aid dosing device with suction lance for on-site storage containers Connection set Lye filter system AktivPlus Pressure booster pump Basket basic equipment: 1 universal basket VKV 50/1 Additional equipment: Original Meiko feed/discharge tables Including spray arm Including mobile water softener Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: E61SI17032579879, This is an SCC 61 WE combination steam oven in an electric version, manufactured by the premium brand Rational, built in 2017. Fgodpfx Apezw H Sletjg The unit will be completely overhauled in our in-house workshop, and the combination steam oven is fully functional. The base shown in the picture is not included in the offer but can be purchased as an option. AVAILABLE FROM WEEK 35!! The recommended retail price is €9,400 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician. Are you looking for a specific Rational equipment type? Ask us; we have access to a large range of used and new equipment. We will gladly advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. This combination steam oven offers space for 5x 400x600mm trays. In automatic mode, the unit automatically detects the ideal cooking path, the size of the food, the quantity loaded, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845x850mm Power connection: V: 400 / kW: 11 / Hz: 50/60 Capacity: 6x 1/1GN Weight: approx. 110 kg Serial number: E61SI17032579879 Year of manufacture: 2017 Condition: used, completely overhauled, fully functional Further details: In combination steam oven mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C). Care Control – self-cleaning system Core temperature sensor Handheld spray nozzle with automatic retraction 8.5-inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease separation system Automatic start time selection 7 cleaning levels for unattended cleaning – even overnight Moistening adjustable in 3 levels – from 30°C to 260°C 5 programmable proofing levels USB interface Joint-free, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like a consultation, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: new, Spare part/conversion kit for industrial Videojet continuous inkjet printers from the 1000 series. The kit includes an umbilical assembly with a printhead, as well as various mounting and connection components. The original Videojet installation/replacement instructions are included. Fgsdpfozx Tg Ssx Aptsg Manufacturer: Videojet Product: Umbilical assembly with printhead Device type: Spare part for continuous inkjet printers Compatibility: Videojet 1000 Line Scope of delivery: Umbilical assembly with printhead, accessories/mounting parts, and instructions as shown in the photos Packaging: Stored in a cardboard box with molded insert Condition: unused / stock item

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Fedpfx Apjy Hp Rrotegg Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: used, Year of construction: 2023, functionality: fully functional, power: 1.1 kW (1.50 HP), Aluminum Angle Conveyor | Year of Construction 2023 | Manufacturer Sale High-quality aluminum angle conveyor for industrial applications. For sale is a used angle conveyor from a customer's facility. We are the manufacturer of the system. The conveyor was replaced with a larger system as part of a new investment and is now being sold on behalf of the customer. The system is in technically perfect condition and can be inspected by appointment. Technical data • Year of construction: 2023 • Manufacturer: die magnetprofis • Conveyor type: Aluminum angle conveyor • Belt width: 500 mm • Usable width: 300 mm • Horizontal section: 4,500 mm • Rising section: 2,200 mm • Total length: 6,100 mm • Inclination angle: 45° • Discharge height: 1,800 mm • Height of horizontal section: 200 mm Drive • Gearbox motor • Power: 1.1 kW • Conveyor speed: 0.3 m/s Fgsdpfozxumtox Aptog • Connection: 230/400 V, 50 Hz • Protection class: IP54 Conveyor belt • PU cleat belt • Belt width: 500 mm • Wavy edge 50 mm • T50 cleats spaced approximately 400 mm apart • Cross-stable, 2-ply belt • Guiding in the bend area via bottom idler rollers Areas of application • Wood industry • Biomass • Recycling • Bulk goods • Packaging • Production plants Condition ✔ Year of construction 2023 ✔ Fully functional ✔ Very well-maintained condition ✔ Immediately available upon agreement An inspection under power is possible after scheduling an appointment. Loading can be assisted. Net price plus VAT. Conveyor, belt conveyor, inclined conveyor, angle conveyor, bend conveyor, discharge conveyor, discharge system, conveying technology, conveying system, material conveyor, transport belt, cleat belt, cleat conveyor, wavy edge conveyor, inclined conveyor, elevating conveyor, industrial conveyor, aluminum conveyor, aluminum conveying system, conveyor belt, used conveying technology, used conveying system, used machine, industrial machine, mechanical engineering, production, automation, conveying line, material transport, bulk goods conveyor, bulk goods technology, wood conveyor, wood industry, biomass, pellets, wood chips, firewood, roundwood, wood waste, wood processing, sawmill, carpentry, joinery, recycling, recycling technology, plastic recycling, metal recycling, disposal technology, packaging technology, sorting system, production plant, industrial plant, conveyor belt 500 mm, conveyor belt 500 mm, PU conveyor belt, cleat belt.

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, HAMOS KWS 1010-0 – complete electrostatic separation line We are selling a complete HAMOS KWS 1010-0 electrostatic separation line, including dust extraction, conveyors, hoppers, vibrating screens, and other accessories. The equipment is designed for dry electrostatic separation of conductive and non-conductive materials, particularly for separating metals from plastics and other non-conductive materials. It is suitable, for example, for processing plastic mixtures, cable waste, electronic waste, and other mixtures containing conductive and non-conductive components. The complete line includes: * electrostatic separator HAMOS KWS 1010-0 * dust extraction and filtration unit IGM PFLUX * large input hopper for material / big bag * conveyor for transporting material to the separation line * large vibrating screen * small vibrating screen * replaceable screens for preparing the desired 1 mm and 2 mm fraction * frame, hoppers, and other line accessories Material handling The large input hopper is designed so that it can be removed from the frame and transported to the desired location using a forklift. This allows the material from the big bag to be emptied into the hopper outside the line itself, and then the hopper can be placed back on the frame. From there, the material is transported to the next part of the process. HAMOS service and modernization The separator itself underwent service and modernization work directly at the HAMOS manufacturer in 2024. Fsdozvgm Hspfx Aptogg As part of these works, the following were carried out, among other things: * new dust extraction solution * electrode cleaning adjustment * installation of a new control unit * other service and refurbishment work The line is available immediately. We prefer to sell the complete technology.

Year of construction: 2018, condition: used, functionality: fully functional, This combination oven from the manufacturer Rational is a CombiMaster® with 8 x 1/1 gastronorm trays in an electric version, allowing you to load the unit with deeper GN containers per tray. (It can also be converted to a 10-tray system). This combination oven was primarily used for reheating packaged food and is therefore in very good used condition. The combination oven is from the 2018 model year. The unit has undergone an inspection in our in-house workshop and is fully functional. The base cabinet shown in the picture is not included in the offer but can be purchased as an option. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 seal. The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the cook through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042mm Minimum door opening dimensions for transport WxH: 845x1050mm Capacity: 8 x 1/1 GN Power connection: V: 400 / kW: 18.6 / Hz: 50-60 Weight: approx. 143kg Serial number: E11MI18072681444 Year of manufacture: 2018 Condition: used, inspected, fully functional Further information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: Bringing pre-prepared and chilled dishes to serving temperature at the optimal climate. Automatic separation of fat for clean cooking chamber air. Semi-automatic cleaning program (see photo sequence). 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food item. Ventilated double-glazed door (swivels for easier cleaning). LED cooking chamber lighting. Core temperature measurement by means of a sensor. Cool-down function. High-performance fresh steam generator (automatic flushing and emptying). Hand spray with automatic retraction. Dynamic air circulation. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC). Fodpfx Apozpvbgetegg

Year of construction: 2020, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro 2-XS from the premium manufacturer Rational (successor to the VCC 112T). The iVario Pro 2-XS is offered including the basic accessories and base unit. The Vario Cooking Center is in excellent condition, as it comes from a training kitchen. The unit is available from approximately week 35. The list price for this unit is: €11,980 net / €14,256.20 gross The list price for the base unit is: €1,227 net / €1,460.13 gross Our price: €7,500 net / €8,925 gross You will receive an invoice with VAT shown. Service: We will gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational device type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our equipment service for you: • 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. • High-quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or self-collection options • Competent advice - before and after purchase • Provision of operating manuals, connection diagrams & spare parts • Inspection according to DGUV V3 Technical data: • W x D x H: 1100 x 756 x 485 mm • Power connection: V: 400 / kW: 13.7 / Hz: 50-60 • Serial number: E07VK20068047700 • Year of manufacture: 2020 • Capacity: 2 x 17 liters Additional included features: • iZone Control • Low-temperature cooking • Socket (Type F) • WiFi • Ethernet and USB interface Condition: Used, major inspection performed and fully functional Additional information: • Integrated spray hose with automatic retraction and spray dosage • High-quality pot base - seamless with rounded corners • Core temperature probe with 6 measuring points • 1,200 programs, each with up to 12 programmable and nameable steps • Integrated hose spray on the unit, integrated water drain in the pot • Temperature unit adjustable in °C or °F • Cooking pot can be tilted • Lid with integrated water inlet • Automatic display of service messages • IPX5 splash water protection • USB interface for HACCP data output and updates Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC). Fgjdpfxozvwqio Aptog

Condition: used, functionality: fully functional, machine/vehicle number: SG74S34001, Year of construction: 2017, operating hours: 7,431 h, total length: 2,210 mm, total height: 1,448 mm, total width: 1,238 mm, type of input current: three-phase, input voltage: 400 V, input current: 30 A, HP MULTI JET FUSION 4200 ADDITIVE MANUFACTURING SYSTEM Located in ALBACETE, SPAIN 7,431 print hours · 2 build units · Tested and functional From a professional service bureau that has now closed. Series production of end-use parts in PA12 nylon. === THE SYSTEM INCLUDES === HP Jet Fusion 3D 4200 printer — S/N SG74S34001, P/N M0P44B, built 04/05/2017 HP Jet Fusion 3D Processing Station (powder processing) Fedpfey U H Idjx Aptsgg Build unit 1 — S/N SG74C35005, P/N M0P45B, built 04/05/2017 Build unit 2 — S/N SG74R35003, P/N M0P45B, built 27/04/2017 Extraction system and external powder collection container HP 3D High Reusability PA12 powder in stock, part factory sealed === ACTUAL USAGE DATA === Read directly from the machine's Printer Information screen: Print time: 445,886 minutes, approx. 7,431 hours Jobs: 718 total, 590 completed successfully Layers printed: 2,800,493 Volume printed: 1,308 litres Fusing lamp calibration: valid Material run: HP 3D High Reusability PA12 Last job on record: 1 July 2025 === SERVICE POSITION === The HP service contract has EXPIRED. The buyer will need to arrange service and, where HP requires it, recertification on relocation or change of ownership. That cost is not included in our price and is worth budgeting for. The machine has been standing since July 2025. We cannot warrant printhead condition after that time; it would be sensible to plan on replacing them. The agent cartridges are effectively empty (0.2 cc fusing, 0.2 cc detailing). The intermediate tanks hold approx. 1,470 cc and 1,142 cc. HP discontinued this model in October 2024, with supplies and support committed through October 2029. The price reflects this position. === TECHNICAL DATA === Manufacturer: HP Model: Jet Fusion 3D 4200 Year: 2017 Technology: Multi Jet Fusion (MJF), powder bed Printer supply: 9 kW, 220-240 / 380-415 V, 30 A, 3W+N+PE Build unit supply: 3 kW, 200-240 V, 16 A, single phase Approvals: UL E165854, CE, FCC Part 15, EAC Printer dimensions: 2,210 × 1,238 × 1,448 mm === APPLICATIONS === Series production of end-use parts, short and medium runs, functional prototyping, automotive, consumer goods and tooling. High Reusability PA12 allows unfused powder to be recycled between jobs. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE2-HP Serial numbers, plate photographs and the Printer Information screen are available in the attached documents.