Used Prepress for sale (69)

Year of construction: 2026, condition: new, U1150073-10 Second-Hand Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, >380 mA U1150073-10 Refurbished Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, (new diode inside, used housing) Isdpfx Anjb Uptce Detf U1150073-10 new, orig. Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel 100262642V00 new, orig. Block LD (Gold, 3 pin, 5.6 V) for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, CTP ᐳ2013 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, second hand 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, new

Year of construction: 2026, condition: new, original Screen laser diodes 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM (64 channel) Itjdpfx Anodmdvvj Def new & second-hand All offers subject to prior sale

Year of construction: 2026, condition: new, U1254024-01 Trailing Edge Clamp Unit, "new" (Screen PT-R4xxx & OEM) PlateRite 4xxx, Luxel T6xxx, Acento, Avalon N4, Topsetter 74/P S100096323V02 orig. Tail Clamp 8RE Set, "new" (Screen PT-R8xxx & OEM) PlateRite 8xxx, Luxel, T9xxx, Avalon, Topsetter 102/P/PF S100096323V02 orig. Tail Clamp 8RE Set (Screen PT-R8xxx & OEM) PlateRite 8xxx, Luxel, T9xxx, Avalon, Topsetter 102/P/PF "refurbished" with orig. Screen parts Ijdpfx Aneb Uptie Dotf All other clamp sets on request All offers are subject to prior sale

Condition: good (used), functionality: fully functional, PL.570.3000-02 BERGER-LAHR Servo Controller for M3 drive motor, Heidelberg Suprasetter A105/74/105 Classic Iodpfxsyitl Do An Dotf second-hand, tested All offers are subject to prior sale

Condition: good (used), S151347 AC Servo Pack PT-R8xxx (SGDB-20AD-Y193) Iodpoyitc Aefx An Djtf second-hand, tested All offers are subject to prior sale

Condition: good (used), PL.572.3100-01 Schneider Servo CTP Controller for M10 Drive Motor second-hand for Suprasetter A-models (GEN II) All offers are subject to prior sale Itedpfx Aoyitbxen Def

Year of construction: 2009, condition: good (used), PL.551.1000 Termotek Chiller for Heidelberg Suprasetter 105, cpl. Iedeyir Udjpfx An Detf second-hand, tested All offers are subject to prior sale

Condition: refurbished (used), mirror motors 633/750 Hz. for Heidelberg Prosetter 52/74/102 fully tested mirror motors 633 Hz. for Heidelberg Primesetter /74/102 fully tested Iedpfepguawsx An Dstf mirror motors for Linotype-Hell/Heidelberg Herkules/Pro/Basic/Elite fully tested All offers subject to prior sale

Condition: good (used), Year of construction: 2014, functionality: fully functional, Laser Moduls for Heidelberg Suprasetter, second hand, tested 6 x GEN II, class 160 mW, 64 diodes, 2.540 dpi with various exposing hours prices and further information on request Itjdpfed Aq U Uox An Dof

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, number of ink cartridges: 7, year of last overhaul: 2018, type of input current: three-phase, overall weight: 4,600 kg, Equipment: cooling unit, documentation/manual, HP Indigo ws4500 | 7 Color | WhiteInk Web-fed Digital Press for Label and Packaging • Only 44.9 Million Impression (ca. 7,9 Mio A3 Prints) • 7 Colors authorized (C,M,Y,K,Violet,Orange,White) • WhiteInk enabled • Resolution 812 x 1624 dpi (High Resolution Mode) • Linearity 150-230 lpi • Web Width from 200 to 330 mm • Max. Image Size 308 x 450 mm • Substrate Thickness 12-350 Microns • Maximum roll diameter 700 mm • Maximum roll weight 75 kg • Printing Speed: 16m/min 4 colours; 2m/min 7 colours ; 32m/min 2 colours • Substrates: SA labels and films | PET | PP | OPP | PE | PVC | PAP • HP IndiChrome On-Press Simulation • Supported file formats PostScript, PDF, EPS, TIFF, JPG • Unwinder • Rewiner • Control PC with HP PrePress Software • PC-RIP Server • HP Software-RIP • Internal Denistometer • External Donaldson Chiller • Still under HP Service until January 2018 • First Installation May 2008 • Can be tested on site Other Details: Guarantee: Without guarantee Current condition: In Production Itsdpst N Rv Esfx An Dof Availability: Immediate

Condition: good (used), functionality: fully functional, Year of construction: 2007, ADVAND Grafoteam PST26 plate stacker, 2007 cleaned and tested Itedpou Hl Hhefx An Djf All offers subject to prior sale

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: 360-6988C, total length: 5,800 mm, total width: 1,140 mm, total height: 1,270 mm, input voltage: 380 V, type of input current: three-phase, infeed width: 890 mm, product height (max.): 830 mm, input frequency: 50 Hz, We are offering this used HIX dryer CUSTOM NP-3619 CE exposure unit, year of manufacture 2006. Itsdpfx Anjx Upvws Djf Power: 27.2 kW Current at 415 V: 40 A Current at 380 V: 37 A Voltage range: 380–415 V Frequency: 50/60 Hz Number of conductors: 5 Phase/neutral voltage: 220–240 V Serial number: 360-6988C If you have any questions or need more information, please feel free to send us a message or call us.

Condition: good (used), Nearly all SCREEN, FUJI, AGFA, HEIDELBERG CTP Spareparts second hand, tested or new Isdpfx Asdpxbgjn Dstf All offers are subject to prior sale

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Iodpfxsvf E Avs An Dstf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Isdpfxsvgrh Uj An Djtf Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: good (used), Year of construction: 2020, 100096365V02 EP-B101 PIF/Network-Interface second-hand, tested, from 2020 Itjdpjwu Emrjfx An Def

Condition: used, Complete Carriage Galileo VS including Spinner and Data-Floppies.Out of a well working Galileo. Isdebwg T Tspfx An Dstf

Condition: used, Year of construction: 2004, Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP plate exposer - Quantity: 1 - Manufacturer: Fujitsu - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output capacity: approx. 20–30 plates/hour (depending on resolution) Itedpewv D T Tofx An Dof - Compatible with various workflow systems - Robust construction for prepress department

Condition: used, Year of construction: 2017, • Manufacturer: AGI • Model: TOWER A3W • Year of manufacture: 2017 • Machine type: Photopolymer plate processor • Machine category: Prepress equipment for flexographic printing Iodpfswv Eazex An Dotf • Max. plate size: DIN A3 (297 mm x 420 mm) • Application: Processing and developing photopolymer plates • Area of use: Label printing, packaging, flexographic printing • Compact design, ideal for small to medium-sized print shops • Condition: Very well maintained, immediately ready for operation