Used Printing Machines for sale (67,037)

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Pgjdpfshg Rcxjx Akfek

Condition: used, Year of construction: 1995, Heidelberg SM74 50*70 – 4-color printing press Pgodpfx Aey E N Etskfek

Condition: used, Alys 30 plotter, used, fully overhauled by Lectra (head, motor, belts), complete with used digitizing board. Pgsdpsy Ddutofx Akfjk

Condition: good (used), I am selling a Teca-Print TPX 350 pad printing machine. Functional and in good condition. Pgedsv H Sgwspfx Akfjk

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Digital label finisher Valloy Duoblade WX I with four cutting heads. Machine used only for demonstration purposes. Main technical information: Media width: 100-350 mm. Number of cutting heads: 4 units. Automatic selection and adjustment of heads according to the cutting file Cutting speed up to 9 m/min. Maximum label size: 350x600 mm. Cutting accuracy: +/-0.2 mm. Automatic web tension control with magnetic powder brake CCD camera for reading registration marks and job numbers Lamination system "Web guide" system Sheeter option Pgedpfx Ajxv Adzjkfek

Condition: excellent (used), Year of construction: 2019, Used Xerox Versant 180 for sale. Configuration: - Xerox Versant 180 printing press - Advanced High Capacity Feeder - Offset Catch Tray Pgedpoy Hkh Ejfx Akfok - EFI Fiery EX-i print server. Total counter approx. 1.2 million. Printer is still in production.

Year of construction: 2001, condition: excellent (used), Production speed: 600 cups/min Colours: 8 Min cup diameter: 60mm Max cup diameter: 130mm Min. cup height: 30mm Max- Cup height: 160mm Counter: 25’731’666 cups produced Equipment / Additional information: Psdpfoxww Nusx Akfogk Consists of: • Stacker • Printing machine • Cup feeding • Stapler

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, We offer for sale a professional manual screen printing press: M&R Chameleon, 10 colors / 4 stations, year of manufacture: 2007. This is a legendary model, recognized as the most precise and stable carousel press in the world. The machine is in very good technical and visual condition and is ready for immediate operation in a professional print shop. Key specifications and advantages: • Configuration: 10 colors / 4 stations (enables printing of very complex designs on a small area). • Duo-Deck™ system: Unique dual-level construction allowing operation of 10 colors while maintaining compact dimensions. • Side Clamps: Provide exceptional screen stability and eliminate vibration during printing. • Air Locks: Pneumatic locking system enabling quick and tool-free frame setup and replacement. Podpey E Ay Defx Akfogk • Micro-registration: Precise registration along three axes, maintaining accuracy even over very long runs. • Origin: M&R brand – guarantee of spare parts availability and service support. This press is perfectly suited for high-end quality printing, pattern creation (sampling) for automatics, or as the main machine in a boutique print shop focused on quality.

Condition: like new (used), Year of construction: 2021, operating hours: 500 h, 1050 including holder for 2 heads The Thermo-Inkjet 1050 was designed as a low-maintenance, easy-to-use industrial printer and produces high-resolution text, logos and graphics as well as 100% error-free readable barcodes. Podpfx Akorz N Imsfogk

Condition: used, Year of construction: 2020, !! We are happy to advise you !! All systems are from 2020 or 2021 //// Used until 12/2021 7 x Domino printer 2 heads new price €4500 now €1900 1 x Makroprint x8 printer with 8 heads new price €18,000 now €8000 3 x Makroprint x4 printer with 4 heads new price €10,000 now €4000 Poderlmwmspfx Akfjgk 2x Makroprint X1 new €1250 1x Edding In Line €1000 4x Chinese and Italian system opinion German open to all HP cartridges piece with 4 heads €1500 A discount is possible for 2 devices!!!

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, NEWFOIL 2000 MKII year 1996 web with 125mm Max. printing area 125x150mm Max. die cutting area 125x150mm Speed 6000 cycles Re-register cell can use 2-foils Pedpfxoyrzzfe Akfegk unwind rewind

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, product width (max.): 250 mm, working width: 247 mm, number of drawers: 4, roll width: 250 mm, roll diameter: 600 mm, inner diameter: 76 mm, EDALE ALPHA 250 year 2007 web width 250mm 4 - color 4 - IR dyer's 2 - die stations 4-anilox 4 doctor blades web camera slitting web guide 2 sets of print cylinders 8pcs Pjdpfxeyrzy Us Akfegk 2 magnetic cylinder condition very good In production Can be see any time

Condition: excellent (used), Year of construction: 1999, Counter: 34,552,033 Format (cm): 36x52 Dampening: conventional dampening Equipment / Additional information: Pedpfx Asyrfz Askfjgk with N&P (numbering & perforating) unit

Condition: excellent (used), Counter (m): 98 Format (cm): 32x46 Psdpfx Ajyvtntekfogk

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Additional information: Pgjdpfx Akjy Evirsfjk Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Number of phases: 3 Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Minimum heat input: 40,000 Btu/hr

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 701 235, Counter: 54,356,348 Format (cm): 36x52 Psdpfx Aovcxxxjkfogk Dampening: Stenz-Dampening-System

Year of construction: 1982, condition: excellent (used), machine/vehicle number: 676411N, WITH N&P UNIT (numbering & perforating) Counter (m): 45 Format (cm): 32x46 Dampening: Varn Kompac III Podpfx Akjivz E Tjfjgk Equipment / Additional information: with N&P (numbering & perforating) unit Bacher control 5000

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 1139, Print counter (m): 66,6 Power: 15.000 sheets/hour Format (mm): Max. Paper Size: 520 x 375 mm // Min. Paper Size: 100 x 105 mm Max. Printing Area: 505 x 350 mm Paper Thickness: 0,04 – 0,6 mm Dampening preparation: technotrans alpha.d Powder device: Grafix Pgjdpfx Asvcxwzjkfok

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 24, Kom.No.: 551.3852 Colours: 6 Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler Technical data Printing unit type DW 200-230 Plate cylinder diameter 200 mm Max. possible print image width 110 mm Number of print segments 4 pieces Max. cup rim diameter 130 mm Min. cup rim diameter 70 mm (55 mm) Max. print image unwinding (specific plate unwinding) (361 mm) / D 115 Max. cup height 130 mm Min. cup height 35 mm Max. bevel 10 degrees Production speed depending on cup size, Pgjdpfxsn D E A Te Akfek quality and raw materials with UV drying up to 24,000 C/h El. connection value (machine, drying and stacking) approx. 35 KVA El. control with Siemens PLC / control station with 2-line display Voltage is 400V, 3 phase, neutral and ground. 50hz is the frequency.

Condition: excellent (used), Year of construction: 2024, machine/vehicle number: VP320C46009320240131V002, Max. media roller: 450 mm Max. media width: 320 mm Max. label roller: 310 mm max. label length: 1200 mm Max. media thicker: 0.3 mm Technical data Speed: max. 7.3 m/min Printing process: CMYK LED toner technology Print processor: 933 MHz, 2 GB, RAM 2G; HDD 40 G Warm-up time: under 28 seconds Interface: TCP/IP Web width: min. 210 mm, max. 330 mm Print width: max. 304 mm Print length: max. 1,200 mm Pgodpfxsvf Inbj Akfek Roll diameter: max. 450 mm (unwinding and rewinding) Roll weight: max. 47.2 kg (unwinding and rewinding) Printing material: 30 - 350 g/m² Resolution: 1200 x 2400 dpi Toner capacity: CMY: 18,500 pages A4 at 5% coverage K: 26,000 pages A4 at 5% coverage Fixing: 480,000 pages A4 Service life Dimensions: 1400 x 850 x 1600 mm Weight: 350 kg Ambient: Temperature 20°C - 24°C, relative humidity 45 – 55% Connection value: 220 – 240 V AC, 50 – 60 Hz, 3.8 KW

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 16035, Format (mm): 229x162 Max. Speed: 560 pcs / min. Paper weight (g / m2): 90 Counter : 53000 /h Performance data // Technical data The specified values are listed as the machine-technical performances using original W + D format parts and components. The achievable performance in practice depends on various parameters beyond our control, e.g. on the characteristics of the materials to be processed, the product and blank shape, window size and position of the windows, feed direction, position and type of the closure flap, as well as the print motif and printing ink. STANDARD The machine is used to print on both sides of pre-made envelopes and mailers with conventional offset printing inks. The printing units are arranged in satellite form around a central counterpressure cylinder. Power: Perfecting: perfecting: Max. 1200 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in double use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in single use Max. 500 envelopes per minute for papers according to DIN 6733 Pedpfx Akoh Icf Ujfegk with a surface mass of 60-165 g / m2 for format heights up to 229 mm in single use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 For format heights up to 180 mm in single use

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: GS000506, Counter: 26‘795‘055 // Speed: 13000 Sheets / h Format: Sheet format max. 370 x 520 mm // min.: 105 x 145 mm Print format max: 360 x 520 mm Thickness: max. 0,4 mm Dampening: Alcolor dampening systems with Baldwin BC 713 EF cooling device Powder device: Alphatronic 200 Equipment / further information Pedovw Ai Rspfx Akfjgk Ultrasonic double sheet control Heidelberg EasyPlate plate clamping device with automatic plate cylinder positioning for quick plate changes with just one tool. Blanket cylinder with central clamping screw for tensioning at the front and rear edges Automatic blanket and impression cylinder washing device (for normal colors) suitable for conventional and vegetable oil-based washing agents, program-controlled via the control system.

Year of construction: 1996, condition: excellent (used), machine/vehicle number: 560037, Com.No.: 451.4013 // No. 2620 Colours: 6 // Performance: up to 36’000 cups per hour Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler Max. cup rim diameter: 130 mm Pgodpehbvrnefx Akfjk Min. cup rim diameter: 55 mm Production speed each according to cup size, quality and Raw materials with UV drying: up to 24,000 cups per hour (without positioning) With positioning 12'000/h - 15'000/h depending on cup, format and flap. El connection value with drying: approx. 26 kVA Electrical connection: 3 x 400 V, 50 Hz Air connection / consumption: 6 bar / approx. 50 m3/h Weight: approx. 7,800 kg This machine doesn’t have cup positioning.

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 664937N, Counter (m): 42 Format (cm): 32x46 Pgodpfx Asgfb E Rskfek Dampening: Varn Kompac III Equipment / Additional information: with N&P (numbering & perforating) unit

Condition: excellent (used), functionality: fully functional, number of ink cartridges: 5, color channels: 5, resolution (max.): 4,800 dpi, paper weight (min.): 52 g/m², paper weight (max.): 360 g/m², paper width (min.): 148 mm, paper width (max.): 330 mm, number of feeding trays: 6, total length: 5,100 mm, total width: 910 mm, total height: 1,510 mm, counter reading (black): 3,29,094, counter reading (color): 16,92,141, Equipment: auto duplex, brochure finisher, documentation/manual, Ricoh Pro C7100X with very low meter count! This machine is in excellent condition and has only made 2,048,198 prints! The machine has been fully tested and is immediately ready for use. The machine is equipped with an E-43A Fiery Controller with Command Workstation 6.3 installed. This Fiery includes the ES-2000 Spectrophotometer to enable optimal color calibration. Pgedpfxoy E N U Ie Akfok The Ricoh Pro C7100X features 2 dual Vacuum Feeders (LCIT RT5100) and an SR5060 Booklet Maker Finisher. This machine has been thoroughly inspected and extensively tested by our own specialized technical team. If you require any further information, please do not hesitate to contact us. Worldwide shipping available.