Used Pressbrake for sale (262)

Year of construction: 2024, condition: new, The DA-69T controller offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The entire 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product. Delem-69T properties: - 3D and 2D graphic touch screen programming mode - 3D representation in simulation and production - 17-inch TFT colour display with high resolution - Complete Windows Application Suite - Compatible with Delem Modusys (module scalability and adaptivity) - USB, peripheral interface - Open system architecture - Bending and correction interface sensor - Profile-T3D offline software - great contribution to environmental protection, climate change and the greenhouse effect will thank us, the next generation will thank us too! AD-S 30175 with Y1, Y2, X and R axis Bending force: 175 tons bending length: 3050mm Passage between stands: 2600mm Rapid speed: 120 mm / sec working speed: 10mm / sec Speed of the return: 100 mm / sec Installation height of tool passage and the penetration depth of your press brake: 30mm table width: 104mm Giedpjd Tpadofx Ad Uep table height: 900mm stroke: 265 mm Projection: 410 mm Support arms: 2 pcs. Stop finger: 2 pcs. Press force and speed of the press brake. X - axis: 500 mm / sec x-axis travel direction 650mm Speed R axis max.: 350 mm / sec R axis travel direction 250 mm Engine power: 18.5 kW Oil tank capacity: 250 litres length 42

Year of construction: 2024, condition: new, Make: DURMA Type: AD-R 30220 bending length: 3050 mm Gijded Srk Espfx Ad Usp Press force: 2200 kN Control: CNC DT-10 Operating hours: 0 h Controlled axes Backgauge: X,R passage between the uprights: 2600 mm stroke length: 265 mm Installation height: 530 mm table width: 104 mm table height: 900 mm Stands projection: 410 mm travel range X-axis: 650 mm traverse speed X-axis: 250 mm/s Infeed speed: 140 mm/s folding speed: 10 mm/s retraction speed: 140 mm/s Dimensions L/W/H: approx. 4250x1770x2900 mm Weight: approx. 12250 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 European tool clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guidance along the entire length Backgauge motorized with linear guide & ball screw Backgauge finger height adjustable Back stop motor Servo Safety covers lateral CE Marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC-B-C+ safety cover & switch Controlled axes X,R-axis, Z-axis manually adjustable Quick clamping CNC controlled motor-driven crowning The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Year of construction: 2024, operating hours: 33 h, condition: new, Machine Dimensions: • (L x W x H): 4,250 mm x 1700 mm c 2750 mm Technical data: Bend length: 3,050 mm Free stand passage: 2,600 mm Control: CNC ModEva 19T Controlled axes rear stop: X, R (Z, Optional) Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand extension: 410 mm Travel range X-axis: 650mm Travel speed: X-axis: 500mm/s Delivery speed (Y): 160 mm/s Bending speed: (Y): 10mm/s Working speed: (R): 350 mm/s Travel range R-axis: 250 mm Hydraulic oil volume: 200l Engine power: 18.5 kW Weight: approx. 10,500 kg Basic equipment: Controls: Cybelec ModEva 19T CNC-controlled bombing Clamping system above: Durma (europ.) Clamping system bottom: 60mm - holder Rear stop: AC Servo motors with ball-circuit spindle Options include: Fiesseler Security System AKAS ll - FPSC-B-C Top tool buttoned: P97.75.R08 (one in split) Subtool, multiple die (die widths 16/22/35/50mm) The machine can be inspected and demonstrated at any time by appointment at our demonstration centre in Staufenberg. Gisdsdx Nm Tepfx Ad Usp Further machines are ready for demonstration in Staufenberg. On request, we will be happy to provide you with further information.

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system Gsdpfod Ih S Uox Ad Usip crown 3 sets of tools included

Condition: used, pressure 70 t chamfer lenght 2600 mm distance between columns 2750 mm stroke 60 mm total power requirement kW weight of the machine ca. 4,3 t dimensions of machine L x W x H 4,45 x 1,30 x 2,53 m Accessories: upper and lower die (each in segments) on 2500 mm length, 2 upper die segments each 835 mm long, back stop Gijdpfxetqqqij Ad Uop

Condition: used, Year of construction: 1988, pressure 100 t Gijdpjtqqyqofx Ad Usp chamfer lenght 2050 mm distance between columns 1550 mm throat 250 mm stroke 200 mm adjustment of press crosshead 200 mm stroke speed - idle stroke downwards 105 mm/sec stroke speed - idle stroke upwards 180 mm/sec stroke speed - under load 9,5 mm/sec table width 200 mm table height over floor 900 mm dayligth 280 - 480 mm back stop - adjustable 3 - 729 mm control CYBELEC SYNCHRO control CNC 7400 PS total power requirement 7,5 kW weight of the machine ca. 10 t dimensions of machine L x W x H 3,70 x 2,00 x 2,80 m - 4 axis controlled - Accessories: programmable back gauge, table extensions, various upper and lower dies segments

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m Gijdpfxjtqqr Rj Ad Uep - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Year of construction: 2008, condition: good (used), Pressbrake LVD - PPEB EASY FORM 320/40 MACH-ID 7712 Make: LVD Type: PPEB EASY FORM 320/40 Control: CADMAN Year: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Specifications Metric US Standard Max. bending length 4000 mm Distance between column 3150 mm Max. pressing force 320 T Dis. Beam - Table 570 mm Beam stroke 300 mm Table Width 200 mm Troth beam 400 mm Approch speed 120 mm/min. Godpfx Asnvduzsd Ujip Working speed 14 mm/min. Return speed 130 mm/min. Adjustment X-Axis back gauge 1000 mm Control CADMAN Power 42 kW Dimensions (Estimate) Length 5800 mm Width 2300 mm Height 3800 mm Weight 23000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1999, pressure 130 t chamfer lenght 3550 mm distance between columns 3060 mm dayligth 510 mm Control Cybelec DNC 80 throat 320 mm stroke 250 mm work height max. 900 mm weight of the machine ca. 12000 kg dimensions of the machine ca. 4,05x2,1x2,85 m Control Cybelec DNC 80 Y1;Y2;X;R axis Die shift with hand wheel Gisdovxwqfepfx Ad Ujp 4 stop fingers hydraulic stamp clamping WILA hydraulic die clamping System Amada 2 pcs. support arms saftey 2-hand / foot operation Various stamps and matrices

Condition: used, Year of construction: 2019, pressure 100 t chamfer lenght 3050 mm distance between columns 3250 mm Control Delem DA 66T stroke y-axis 300 mm dayligth 590 mm ajustment speed 75 mm/sec Bending Speed 20 mm/sec. backward speed 75 mm/s total power requirement 11 kW Gisdpfx Ajv R Hvnod Uep weight of the machine ca. 6,5 t dimensions of the machine ca. 4,3x2,0x2,9 m Demonstration machine Y1 / Y2 servo electronic Hydraulic stamp clamping (WILA Premium) Hydraulic die clamping (WILA Premium) including motorized crowning Back gauge system "DENER" X-; R-; Z1-; Z2- axis FIESSLER AKAS LC II M Typ 4 (manual adjustment)with box bending Rolleri quick-change tools segmented: Punch TPR200.28.R1, die TMR100.12.30 total 3.050 mm length

Condition: good (used), Year of construction: 2000, Morgan Rushworth NC Downstroking Pressbrake – Year 2000 Giedpfxsxau Ele Ad Ujp 120 tonnes x 4000 mm. NC Backguage. Safety Guards. Top and Bottom Tooling and Toolholders.

Condition: used, Year of construction: 1990, pressure:80 t Giodpfx Adecxxvgs Uop chamfer lenght:2505 mm distance between columns:2200 mm total power requirement:7,3 kvA weight of the machine ca.:5,6 t dimensions of the machine ca.:3 x 2,25 x 2,20 m

Condition: excellent (used), Year of construction: 2000, pressure 105 t chamfer lenght 3100 mm Giedevq R Uuepfx Ad Ujp distance between columns 2600 mm table width 100 mm table height 750 mm Control DELEM DA 65 dayligth 200 mm working feed 0 - 10 mm/sec return speed 0-100 mm/sec rapid traverse - up max. 100 mm/sec voltage 380 V / 50 Hz total power requirement 11 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 4 x 2,2 x 2,8 m Equipment: • CNC-control DELEM DA65 graphic video • controlled backgauge 2 axis • upper and lower tool • 2 hand control / foot switch

Condition: used, Year of construction: 1980, pressure 50 t chamfer lenght 2500 mm distance between columns 2050 mm throat 200 mm table width 140 mm table height 750 mm distance table - lower edge of ram 300 mm max. ram stroke 100 mm closing speed 9 - 160 mm/sec return speed 55 mm/sec Gisdsxc Nwzopfx Ad Uep voltage 380 V / 50 Hz engine output 4,1 kW total power requirement 5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 3, x 1,2 x 2,6 m Equipment: • manuel back stop • upper and lower tools Split , lower tool 2000 mm long • 2 manual operation / foot switch

Condition: used, Year of construction: 1980, pressure 200 t chamfer lenght 3000 mm distance between columns 2560 mm dayligth 450 mm throat 450 mm adjustment of stroke 240 mm horn length over column outer edge each 175 mm table length 3050 mm table width 280 mm table height over floor 820 mm electrics - voltage/frequency 220/50 V/Hz control CYBELEC, DNC60 Giedet Hllpepfx Ad Uep stroke 250 mm operating pressure 150 bar weight of the machine ca. 15 t dimensions of the machine ca. L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC 60 • lower part of the machine moves down 500 mm to the floor, • at the moment the machine is mounted on a double-T-support; • prism and upper part of the machine in 3000 mm length

Condition: used, Year of construction: 1980, pressure 50 t chamfer lenght 2500 mm distance between columns 2050 mm table width 140 mm table height 750 mm total power requirement 8 kW weight of the machine ca. 4,5 t Giodpfx Adjxddqxj Uop dimensions of the machine ca. 3, x 1,2 x 2,6 m Equipment: • manual back stop • upper and lower tools • 2 manual operation / foot switch

Condition: new, functionality: fully functional, Year of construction: 2025, bending force (max.): 1,000 t, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, overall weight: 8,000 kg, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, bending angle (max.): 90 °, table length: 3,200 mm, working height: 450 mm, All-Electric Servo Bending Machine Gedpfxjv Hchls Ad Usip Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: repair required (used), Manufacturer: Amada Type: 5020 Year of construction: 1990, Number of axles: 3 Giodpev Umm Iefx Ad Ujp Pressing force: 50t Bending length: 2000mm Sold without prisms, The machine works, moves, Error: End position of the Y-axis must be repaired. Height adjustment is missing,

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1032, warranty duration: 12 months, total width: 2,300 mm, total length: 1,685 mm, bending angle (max.): 90 °, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, nominal power (apparent): 4 kVA, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, type of input current: three-phase, -Complete machine frame processing -Double-cylinder electro-hydraulic synchronous control -A variety of electro-hydraulic CNC systems are optional -Mechanical compensation -Segmented mold -High-precision back gauge structure -Scalable number of axes Giedpjwfwkwjfx Ad Uop

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1235, controller manufacturer: Germany Beckhoff, working width: 1,200 mm, bending angle (max.): 90 °, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, total length: 1,685 mm, total width: 1,262 mm, type of input current: three-phase, workpiece length (max.): 1,200 mm, workpiece height (max.): 430 mm, nominal power (apparent): 3 kVA, number of spindles: 6, opening width: 400 mm, - Germany Beckhoff System, Closed-loop control, High bending accuracy. Gjdowfwkqopfx Ad Ueip - Italy GIVI MEASURE precision linear encoder. -High strength machine body after heat-treated. - No need to change bending tool. - The Blank-holder tool can automatically change the length basic on the sheet length. - Multilateral automatic continuous bending. -Automatic programming software can finish all the process - Automatically check and optimize. the process -All servo motor control, fast and energy saving - Automatically control pressing force.

Condition: new, functionality: fully functional, Year of construction: 2025, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. Giedsrq D Niopfx Ad Usp The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 600 mm, Series: GB-E Bending pressure: 130KN Bending length: 600(mm) Godpfx Adewzqn Ue Usip

Condition: new, Year of construction: 2024, functionality: fully functional, TRtech Prime 31100 Press Brake 1 EUR 52,500.00 EUR 52,500.00 Bending Force: 100 ton Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 265 mm Daylight: 490 mm Throat Depth: 410 mm Table Height: 900 Table Width: 110 mm Free Fall Speed: 120 mm/s Pressing Speed: 10 mm/s Return Dpeed: 110 mm/s X Axis Stroke: 750 mm Engine Power: 11 kW Width: 1780 mm Height: 3960 mm Length: 2850 mm App. Weight: 8500 kg Number of Axis: X, R, Z1, Z2, Y1, Y2 Safety Cages with Switch Gsdpfxevd Aave Ad Ueip CNC Controlled Hydraulic Dynamic Crowning System Control Unit: STEP Rock 22 Servo Motor Backgauge: X, R, Z1, Z2 Segmented Die Segmented Punch Sliding Front Arms ( T-Slot and stopper ): 2 pieces Payment conditions: BY SWIFT: %40 pre-payment in advance, rest before loading TOTAL EUR 52.500,00 Delivery time: EX-Works OSM Makina, 12 weeks after the reception of order SEAL AND SIGNATURE PROFORMA INVOICE Bill To Frank Pelka Maschinen GmbH Dorfstr. 11 57271 Hilchenbach Germany

Condition: new, Year of construction: 2023, neu 2023 7295 ca. 12 Wochen ab Auftrags Türkei 22750 € Giedpfx Adoypbwnj Uop 436.8 € 150 to fix 1520 mm 300 mm 1520 mm 610 mm 9 mm/s 5 mm/s 10 mm/s 10 mm 600x1520 mm 100 mm 190 mm 2630 mm 1000 mm 2450 mm 3270 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel and foot pedal Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 20700 € 397.44 € 150 to fix 1000 mm 300 mm Gijdpfxswiru Ej Ad Ujp 1020 mm 610 mm 9 mm/s 5 mm/s 10 mm/s 8 mm 600x1020 mm 100 mm 190 mm 2110 mm 1000 mm 2450 mm 2400 kg 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH