Used Isostatic Pressing for sale (10,046)

Year of construction: 1997, condition: used, Double trough pre-pressing screw Hjdpfx Adstppmzowjfb Trough approx. 2,800 x 660 mm Screw diameter approx. 370 mm 2-cylinder solids pump SP 2180-400 with distribution station and 55 kW hydraulic unit

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Hfodpfx Aex A U Ncodwob Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: good (used), Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers Hjdpfxswup Efo Adwefb -Manufacturer: Klauke, hand crimping pliers type K05 -Crimping: of cable lugs and cable connectors -Standard version: 6 - 50 mm -Dimensions: 390/140/H50 mm -Weight: 1.1 kg

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Hfedpfx Ajxgtd Hodweb

Condition: like new (used), Automatic pressing line (short cycle), useful to apply veneer, paper or laminates, composed of: Hjdpfjdun Niox Adwjfb V03022) Loader (Portal) "SAG" Double-station (of pick-up) with central motorized rollers table V03023) Brushing machine (to top and bottom clean the panels) "POLIMA"  V03024) Glue Spreader "OMMA" V03025) Motorized Conveyoring Disks way "OMMA" V03026) Preparing table for the panels and motorized in-feed carpet to the press "SIMI" V03027) Short cycle hot hydraulic Press "SIMI IMPIANTI" mm 1400 x 4500, with No. 10 pressing cylinders V03028) Unloader-stacker (Portal) "SAG" Double-station (of storage) with central motorized rollers table

Condition: good (used), Year of construction: 2001, Extruding pressing line for soybean, Instapro, made in 2001, consisted of 2 extruders, 2 presses, original AMA automatic filtration for oil, and cooler for the cake. Hodpfsxuahbjx Adwofb Capacity is up to 1.200kg/h.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, Lightly used ORMA MEMBRANE PRESS, model DUPLEX 30/15 vacuum press with preheating oven/table for acrylic and thermoform plastics. Has only seen occasional light project use. Suitable, for example, for processing Corian sheets. An alternative to buying a new machine. Pressing area: 3000 x 1500 mm Vacuum pressing force across the entire work area: 44 tons 11 tons/m2 Maximum pressing height: 500 mm ORMA HEATING OVEN/TABLE 30/15 FOR ACRYLICS AND THERMOFORM PLASTICS • Heating by electric resistors and air circulation • Heated area: 3000 x 1500 mm • Max height of workpiece: 100 mm • Heating power: 18 kW • Maximum temperature: 200°C • Digital temperature control from the control panel The unit's frame is made from welded thick steel beam structure and welded steel sheets. There is an insulation layer between the galvanized steel sheets of the oven’s inner and outer surfaces. Manual oven opening, guided rails, and transport wheels. Membrane press bed is phenolic-coated plywood featuring a grid pattern for improved vacuum distribution. Hfsdjxz Rhfspfx Adwsb The top section, where the membrane film is mounted, opens 45 degrees and is equipped with gas springs. Quick and easy upper section locking. Manual membrane film quick-mount system. Vacuum system with a single 25 m3/h vacuum pump. Control panel, installed on the left side of the machine, includes: • Main switch • Control voltage indicator lamp • Emergency Stop button • Temperature monitoring/control • Vacuum pump status light on/off • Heater status light on/off

Condition: used, Year of construction: 2023, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 178, type of input current: AC, total width: 2,000 mm, total length: 4,000 mm, total height: 2,000 mm, overall weight: 1,100 kg, power of the servo motor: 13 W, hopper volume: 500 l, input voltage: 400 V, For technical details please contact manufactorer SRAML Slovenia Products: The Belt Press has been used for the pressing of apples, other fruits, and elderflowers Hedpfox E N Unsx Adwofb

Condition: good (used), Pressing pliers, pressing machine, pressing jaws, pressing tools, pressing rings Hfsdovmhaajpfx Adwsb -Manufacturer: Roller, pressing pliers pressing jaws pressing rings set -Sizes: M15, M22, M28, Z1 -Individual components: see photos -Dimensions case: 410/220/H65 mm -Weight: 4.7 kg

Condition: ready for operation (used), For sale: a very solid and fully operational Constantin Hang 150-06, the industry standard for press-fitting and crimping ring binder mechanisms onto folders, binders, and covers. Hedpfx Adjx A Ivvswsfb Specifications and features: • Suitable for 2-ring and 4-ring mechanisms • Powerful mechanical eccentric press • Very robust German construction (cast iron) • Foot pedal operation for safe and fast working • Complete and ready for immediate use • Machine presses and crimps the legs of the ring mechanism in a single operation • Ideal for binderies, file manufacturers, and office supply production Currently set up for 2-ring mechanisms (80 mm), but can be easily adjusted for other mechanisms. Technical data: • Manufacturer: Constantin Hang • Model: 150-06 • Serial number: 102160 • Country of origin: Germany Condition: Good, clean, and working condition. Can be demonstrated immediately.

Condition: excellent (used), Year of construction: 2010, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 + STACKER Maximum possible input length: 1800mm Hodpfxjw Anc Eo Adwofb Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 100mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Year of construction: 2007, condition: good (used), functionality: fully functional, We are offering pressing line for rapeseed/sunflower with prepress (FS1000 55kw), final press (FS1000 45kw) and full automatic filtration for oil, 10m2. Hjdjxuafyepfx Adwofb It is made for double cold pressing, which is low energy consuming and completely natural, providing the oil without necessity for degumming, because phosphorus content is low. After that full automatic filtration will remove cake residues from oil, which can be safely stored without any damage. Capacity of the line 1.400kg/h, 32t/24h

Condition: excellent (used), Year of construction: 2023, Pressing Lines for automatic multi-(2-3)-layer parquet production. Hjdpfeggflcex Adwofb

Year of construction: 1993, condition: excellent (used), machine/vehicle number: 32781, Size: 300 x 560 mm Hfsdpfx Adehncafswob Speed: 44.000 c/h

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 120 x 330 mm Hfjdpfjvu Sqxsx Adwjb -Weight: 11.4 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SINAC 25/40 SM Exp, total height: 1,500 mm, total width: 1,000 mm, total length: 2,500 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, input current: 45 A, Induction heating station with 25 kW power for transporting and pressing bearings. Hsdpfxew Hwp Nj Adwofb

Condition: excellent (used), Year of construction: 2012, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Maximum possible input length: 1800mm Hfodpfx Ajvw Eh Njdwsb Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 100mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 250 kg, Cross Slide – Support Type PS 30 Support suitable for hand-operated press machines with 300 mm center height Technical Data Longitudinal slide travel: 220 mm Cross slide travel: 120 mm Height: 230 mm Rotary table diameter: 200 mm Shear length: 550 mm Weight approx.: 250 kg Machine Description Hfodpfjxp Sd Rex Adweb - Technically inspected and ready for operation - Robust cast iron construction - Adjustable dovetail guides - Trapezoidal spindle for longitudinal and cross slide - Large handwheels

Condition: used, Schuppenauslage mit Presswalzen / Stream Delivery integrated Pressing Heidelberg SKP.D ME Baujahr / Year 1996 - Serial-No. 79018/96-242508 Arbeitsbreite / Working width max. 660mm Geschwindigkeit / Speed min. 30m/min. - max. 160m/min. Stream delivery with integrated pressing rollers Fahrbar / Mobile Built-in controller Spreizen von Mehrfachnutzenströmen / Spreading Marking by 2 cm shifting Light barrier and counter Equipment for two-up production Integrierte Presse / Integrated pressing station Hfedpovt U Siofx Adwob Kontinuierlicher Schuppenstrom / Continuous stream delivery Auf Anfrage / On request: Netzadapter für den Eigenbetrieb / Power Adapter for SelfControl Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Visit our online Spare Parts Shop: Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2010, condition: excellent (used), I sell the complete line for production of solid wood panels. Product size max. 2600X2100mm Complete line consists of: 6-spindle Weinig Unimat fourside moulder Cross chain conveyor Automatic Glue spreading unit with cycle programming Entry table before the press Italpresse GB/13 Super Press size 2600mm (Parallel dimension / element length) x 2100mm (Cross dimension / Working width) Output table with rollers and cross chain outfeed conveyor Hodpfx Asg D Uuqedwsfb Available as a complete line or sellable also separately. Because of that, the price is on agreement. Available immediately. Possible to test. Suitable also for another jobs. Products like parquettes, floor inputs, etc.

Condition: used, Schuppenauslage mit Presswalzen / Stream Delivery with integrated Pressing Horizon PST-40 Baujahr / Year 2006 - Serial-No. 028008 Hedovkkhnopfx Adwefb Format / Size min. 60 x 64mm - max. 440 x 310mm Höhe / High 280 - 1000mm mit Markiereinrichtung / with marking device Leistung / Geschwindigkeit 50-230m/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1987, machine/vehicle number: 33879, Stehendbogenauslage - Horizontal Stack Delivery with Pressing Stahl SBP 46Year 1987 - Serial-No. 33879/87-134584 Hfedpfsh Aygfjx Adweb Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1999, machine/vehicle number: 990418402, Schuppenauslage mit integrierter Presse / Stream delivery with integrated pressing MBO ASP 82 - 2 MEBaujahr / Year 1999 - Serial-No. 990418402 Arbeitsbreite / Working width max. 820mm Geschwindigkeit / Speed min. 30m/min. - max. 160m/min. Einlaufhöhe / Infeed high min. 400mm - max. 950mm Stream delivery with integrated pressing rollersBeschreibung / Description: Fahrbar / Mobile Built-in controller Spreizen von Mehrfachnutzenströmen / Spreading Marking by 2 cm shifting Light barrier and counter ASP 82-2 ME extension to four-up production Integrierte Presse / Integrated pressing station Kontinuierlicher Schuppenstrom / Continuous stream delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Hfedpfeih Nl Rox Adwjb Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 980117384, Vertikalstapelauslage - Vertical Stack Delivery with Pressing and Marking Device MBO SAP46L Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Hfedpfxsh Axqfe Adwob On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1994, machine/vehicle number: 49504, Stehendbogenauslage mit Markiereinrichtung - Horizontal Stack Delivery with Pressing - Marking Stahl SBP 46.2Year 1994 - Serial-No. 49504/94-218513 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Hfodpfx Adeh Ax S Dswsb On Stock Emskirchen / Nürnberg - Can be test