Used Prinect Prepress Interface for sale (4,174)

Condition: excellent (used), Huber Unichiller 060Tw water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 060Tw Equipment type: Water-cooled recirculating chiller Temperature range: -20 to +40 °C Cooling capacity: up to 6 kW Offered is a used Huber Unichiller 060Tw with a water-cooled refrigeration unit and Pilot ONE touchscreen control. The unit is designed for the precise cooling and temperature control of external closed circuits and is suitable for applications such as process cooling, machine cooling, laboratory applications, chemical processes, and technical and industrial systems. Technical data: Temperature range: -20 to +40 °C Temperature stability at -10 °C: 0.5 K Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Safety class: I / NFL Protection class: IP20 Cooling capacity at +15 °C: 6.0 kW Cooling capacity at 0 °C: 5.0 kW Cooling capacity at -10 °C: 3.1 kW Cooling capacity at -20 °C: 1.7 kW Power connection: 460 V / 3 phases / 60 Hz Max. current draw according to nameplate: 6.7 A Refrigerant: R507 Refrigerant charge: 1.2 kg Max. pressure: 25 bar Bdjdjzui Tgspfx Abtsg CFC- and HCFC-free Circulating pump: C3 Max. flow rate: 122 l/min Max. delivery pressure: 5.6 bar Pump connection: G1 1/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Cooling water consumption: approx. 70 to 330 l/h, depending on the inlet temperature Min. fill volume: 5.9 l Expansion volume: 7.5 l Permissible ambient temperature: +5 to +40 °C Control: Huber Pilot ONE controller 5.7" color touchscreen Graphical temperature display Program and ramp functions Digital level indicator Multilingual user interface Ethernet USB Host / Device RS232 / Serial Pt100 connection for external temperature sensor Dimensions: Dimensions: approx. 600 × 600 × 1450 mm (W × D × H) Net weight: approx. 213 kg Equipment: Water-cooled refrigeration unit C3 circulating pump Pilot ONE touchscreen controller Stainless steel housing Stainless steel circulating pump Atmospherically open expansion tank Copper-brazed evaporator Digital level gauge Main switch Ethernet, USB, and RS232 interfaces Pt100 connection Cooling water and process connections Castors Connection hoses as shown in the pictures Shipping data: Dimensions: approx. 600 × 600 × 1450 mm Weight: approx. 213 kg net Shipping by freight forwarder possible. Scope of delivery: 1 × Huber Unichiller 060Tw recirculating chiller Connection hoses and accessories as shown in the pictures. Condition: Used. Optical condition as shown in the pictures. The unit is available upon agreement. Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: excellent (used), Huber Unichiller UC055Tw spec. – water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw spec. Type: UC055Tw spec. Machine type: Recirculating chiller / temperature control unit / process chiller Temperature range: -10 to +40 °C Offered is a used Huber Unichiller UC055Tw spec. with a water-cooled refrigeration unit. The unit is designed for temperature control and process cooling of external closed circuits. Operation is via the Huber Compatible Control system. Technical data: Temperature range: -10 to +40 °C Power connection: 400 V / 3~ N / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant charge: 1.07 kg Max. pressure: 25 bar Refrigeration unit: water-cooled CFC- and HCFC-free Bdedpozui Uwofx Abtog The UC055Tw series is designed as a recirculating chiller for an external closed temperature control circuit. The unit in question is a special version, “UC055Tw spec.” Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1,450 mm Weight: approx. 168 kg Equipment: Huber Compatible Control temperature control Digital display Connections for external temperature control circuit Cooling water connections Drain and residual drain Interfaces on the unit Main switch Stainless steel housing Transport rollers Lifting eyes Shipping data: Due to its size and weight, transport is preferably by freight forwarder. Dimensions of the unit: approx. 600 x 600 x 1,450 mm Weight of the unit: approx. 168 kg Condition: Used condition with signs of wear and tear consistent with age and use. The exact optical condition can be seen in the pictures. Scope of supply: 1x Huber Unichiller UC055Tw spec. Connection/cooling water hoses as shown in the pictures Scope of supply as shown in the pictures The machine is available by arrangement. The scope of supply is as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, Year of construction: 2019, Used Machine Year of Manufacture: 2019 Condition: The machine is sold "as is." It was in operation until early 2026 and has been continuously connected to a power source ever since, with the exception of the time it was transported to our warehouse. Bdsdpfx Aezlbtaobtsg Features and Technical Specifications: Printing bed: 2,500 × 1,300 mm High printing speed: Up to 25 m²/h or 8 sheets/h in 2,440 × 1,220 mm format at 4C Up to approx. 12.5 m²/h at 4C W with simultaneous white printing New ink supply system: The 1-liter ink bottles can be conveniently replaced from the front—making refilling particularly quick and easy. Simple operation without alignment issues: Alignment pins and registration pins, along with a printed measurement scale, enable precise positioning of the media on the print table. The pins secure the media to prevent slipping. Using the measurement scale, layout and RIP data can be easily adjusted to the desired position. High flexibility thanks to direct printing on a wide variety of media, including thick substrates up to 50 mm in thickness. The Mimaki Advance Pass System reduces unwanted banding and improves print quality. The special Mimaki circulation system prevents white ink from settling. Mimaki Clear Control (MCC): To prevent dust adhesion and small air bubbles, the drying time and UV radiation are adjusted. This results in both glossy and stylish matte finishes. By applying multiple layers of clear coat, the print can also be embossed to create multidimensional effects. Convenient ink selection: LH-100: hard UV ink for smooth surfaces with high scratch resistance, color brilliance, and solvent resistance LUS-150: flexible UV ink for smooth and uneven surfaces, deformable up to approx. 150%, and suitable for numerous substrates White ink for image underprinting reduces light show-through Two-layer printing with white on clear and colored surfaces Finishing with a glossy or matte varnish Environmentally conscious printing: UV printing technology does not release any harmful substances. UV-LED lamps ensure low power consumption and a long service life. RasterLink 6: Powerful RIP for outstanding color reproduction Different print jobs can be easily nested Simple and user-friendly operation Self-explanatory icons make getting started easy Related RIP settings are clearly arranged in a single window Settings can be saved as favorites for repeated use Direct monitoring of the printing process in the main window Software and profiles can be updated via the Internet Technical Specifications: Printing method: Piezo inkjet Print heads: 2 heads in an offset arrangement Max. print format (W × L): 2,500 × 1,300 mm Max. material format (W × L): 2,500 × 1,300 mm Max. material thickness: 50 mmMax. material weight: 50 kg with even weight distribution Print resolutions: 300, 450, 600, 900, and 1,200 dpi Media Suction: Vacuum Vacuum Zones: 2 zones along the X-axis Accuracy: absolute ±0.3 mm or ±0.3% of the specified distance; whichever is greater Repeatability: ±0.2 mm or ±0.1% of the specified distance; the greater value applies Curing: UV-LED technology Service life of UV-LED lamps: Reference value over 5,000 hours, not guaranteed Interface: USB 2.0 Power consumption: up to 2.88 kW Power supply: 200–240 V, 50/60 Hz, single-phase, up to 12 A Dimensions (W × D × H): 4,400 × 2,250 × 1,250 mm Weight: 650 kg Availability: upon request Storage l...

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: E22SI16112554448, This is a combination oven/steamer SCC WE 202, in an electric version, from the premium manufacturer Rational, manufactured in 2016. The combination oven/steamer is located in our in-house workshop and will undergo a thorough inspection before being sold with a 6-month warranty. The combination oven/steamer has only been used for 7,673 operating hours. You will receive an invoice with VAT shown. Service: We will be happy to assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs • High-quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or self-collection options • Competent advice - before and after purchase • Provision of operating instructions, connection diagrams & spare parts • Inspection according to DGUV V3 seal This combination oven/steamer offers space for 20 x 2/1 or 40 x 1/1 GN containers. In automatic mode, the appliance automatically recognizes the ideal cooking path, the size of the food, the amount being cooked, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods and finishing). Technical data: • W x D x H: approx. 1084 x 996 x 1782 mm • Minimum door opening dimensions for transport W x H: 1145x1900mm • Power connection: V: 400 / kW: 65.5 / Hz: 50/60 • Weight: approx. 351 kg • Serial number: E22SI16112554448 • Year of manufacture: 11/2016 Condition: Used, inspected and fully functional. Additional information: • In combination oven/steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C) and combination (30°C to 300°C) • Core temperature sensor • Integrated energy optimization • Care Control - Self-cleaning • Handheld spray gun with automatic retraction • 8.5-inch color display and touchscreen • 5 fan speeds programmable • Integrated, maintenance-free grease separation system • Automatic start time setting • 7 cleaning levels for unattended cleaning - also overnight • Humidification adjustable in 3 levels - from 30°C to 260°C • 5 programmable fermentation levels Bdodozkh Ihopfx Abtog • USB interface • Seamless, tub-shaped hygienic cooking chamber, rounded corners • Halogen cooking chamber lighting Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: used, functionality: fully functional, mileage: 3,85,244 km, power: 331 kW (450.03 HP), first registration: 07/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Bdjdpfx Abozt H Dtstog Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, mileage: 32 km, power: 121 kW (164.51 HP), first registration: 01/2026, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,797 mm, total width: 2,474 mm, total height: 2,215 mm, loading space length: 4,235 mm, loading space width: 2,138 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4799.CHO25.SG30627 Errors and prior sale excepted! ----LOCATION: 04758 Oschatz, Filderstädter Straße 10 Phone number for inquiries: Mr. Enrico Schieler: 03435 ? 90 90 22 or schieler(at)----SPECIAL EQUIPMENT * Airbag, passenger side - with airbag deactivation function * Trailer hitch - fixed, 13-pole socket - incl. trailer stabilization * Technology Package 15: Exterior mirrors, electrically adjustable, foldable and heated - Blind Spot Information System incl. Cross Traffic Alert - Ford Audio System 3 - Fog lights - Pre-Collision Assist, camera and radar-based - Lane Keeping Assist - Traffic Sign Recognition System, extended - Front Park Assist - Adaptive Cruise Control - Rearview camera - Navigation system FURTHER EQUIPMENT * 1 battery * Axle load increase - front to 1850 kg * Airbag, driver side * ABS with electronic brake force distribution - ESP with traction control - Hill Start Assist - Side Wind Assist - Emergency Brake Assist - Rollover Protection - Emergency Brake Support incl. hazard warning lights - additionally with trailer stabilization only in connection with trailer hitch (at an extra cost) * Exterior mirrors, short arm - with integrated turn signals * Battery: Battery runtime, programming of the battery runtime to 10 min * Floor covered with rubber up to the partition * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO-Mode * Roof, overhead storage compartment front * Headliner in driver's cab * Roof marker lights * Tachometer * Power windows - with quick-down/up function for driver's side * Parking brake, electronic * Ford Easy Fuel - convenient fuel filler flap and misfueling protection * FordPass Connect incl. live traffic information and WLAN hotspot 5G modem (up to 5 G/LTE, for up to 10 mobile devices) Bdedpfszq Tp Rsx Abteg * Windshield, heated * Glove compartment with locking lid * Interior lighting with delay function with reading lamps in front * Interior mirror * Automatic climate control * Fuel tank 70 l * Emergency Assist * Particulate filter: Diesel particulate filter * Platform: Standard platform (wide) - Front wall extension, securing straps for loading flap * Radio: 12-inch multifunction display and Ford SYNC 4 communication and entertainment system with voice control and Bluetooth 7 and USB interface - Integration of various telephony functions - Playback of music - Integration of storage media - Emergency Assist - Ford Power-Up software updates - AppLink (wireless) - Support for Android Auto and Apple CarPlay - Capacitive touchscreen technology - 15 different languages, graphically and acoustically * Full wheel covers * Tire repair kit * Tire pressure monitoring system * Wheels: Steel wheels 6.5 J x 16 with 235/65 R 16 tires * Windshield wipers with rain sensor * Headlights, low beam: Halogen headlights with daytime running lights * Power steering * Seat belts - Seat belt pretensioners and force limiters in front * Seat Package 18A - Driver's seat, 4-way adjustable - Passenger double seat - Headrests, height-adjustable - Tray on the passenger double seat (foldable) - Interior armrest for driver - Lumbar support for driver - Seat cover: Fabric * Front bumper * Recirculation/heating in front * Immobilizer * Central locking with remote control - 2 keys, one with remote control * Overhead storage compartment front ...and more.----1st owner. German version.

Condition: used, mileage: 86,384 km, power: 55 kW (74.78 HP), first registration: 09/2022, fuel type: diesel, overall weight: 1,860 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 4,157 mm, total width: 1,764 mm, total height: 1,813 mm, loading space length: 1,620 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1074. NY32603 Bdedozq Tquspfx Abtog ----EQUIPMENT * Front air conditioning incl. manual recirculation control * Double locking for central locking * Rear window, fixed rear window wiper * Cargo area lighting, LED * Cargo area mat, rear, continuous * Seats: Seat package 13 (Courier) Passenger seat, foldable and retractable, driver's seat, manually adjustable in 2 directions, warning system for driver's unfastened seat belt * Transmission: 6-speed manual * ABS with EBD * Airbag, driver side * Exterior mirrors, manually adjustable * Third brake light * Diesel particulate filter (DPF) * Double-wing rear door without window * Rev counter * Electronic Stability Program (ESP) with Traction Control System (TCS) * Energy recovery (Smart Regenerative Charging) * Ford Easy Fuel - comfort fuel filler cap and misfueling protection * Rubber floor mat in the cab * Glove compartment with lid * Interior lighting with delay function * Headrests (2) in front * Paint: solid color * Cargo area lighting * Steering column, adjustable in height and reach * Front center console, open, with bottle holder and ticket holder * Emergency brake light - hazard warning light activation during heavy braking * Package: -25° starter package * Package: Function package 12 - without sliding door - partition, full, plastic * Pollen filter * Upholstery: fabric * Radio: Audio system 15 - with digital radio reception DAB/DAB+ MyConnection radio, radio (FM/AM), MP3-capable, USB connection - Bluetooth interface - 2 speakers - MyFord Dock * Power steering, electro-mechanical EPAS (Electric Power Assisted Steering) * Package: Wheel 1 - 4x steel wheels with wheel hub cover in black * Start-stop system incl. battery, 60 AH 590 CCA * Socket: 12-volt connection * Daytime running lights * Lashing eyes 6 - DIN 75410 * Immobilizer * Heat-reflective glazing, lightly tinted * Central locking ... and more ----The vehicle has not been prepared! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any further questions? We would be happy to advise you!

Condition: good (used), Wohlenberg 132 TS ASE Paper guillotine Machine in perfect condition, ready for production. Year of manufacture 2015. Available immediately from stock. Equipped with the ASE automatic trim removal system. Bedpfozp I Hhjx Abtsdg The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes a variety of cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools, and a conveyor belt.

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle part counter total counter Bdedpfxjzk U Rpe Abteg tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. The robot cell has been diemanteled, it is now a stand alone machine. A bar feeder can be added. *

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Bdsdpfx Aszrr Uujbtog Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: used, mileage: 1,52,000 km, power: 350 kW (475.87 HP), first registration: 06/2017, fuel type: gasoline, color: grey, gearing type: automatic, emission class: euro6, number of seats: 4, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, Experience the power and elegance of a true sports car: This used 2017 Mercedes-Benz C 63 AMG offers an exceptional driving experience with its 8-cylinder engine delivering 476 hp. As a rear-wheel drive sports car with an automatic transmission, it impresses with its comprehensive equipment and complies with the Euro 6 emissions standard. The grey metallic paintwork perfectly complements the black partial leather upholstery. This vehicle features a dynamic chassis control system and a sports package for maximum driving enjoyment. The panoramic glass roof provides a spacious feeling in the interior. LED headlights and LED daytime running lights emphasize the sporty character. With only two previous owners and a complete service history, this C 63 AMG is a reliable companion. Adaptive cruise control, lane keeping assist, and collision avoidance system guarantee maximum driving comfort and safety. * 8-cylinder engine with 476 hp and automatic transmission * Sports suspension with dynamic control system and sports package * Panoramic glass roof and LED headlights * Partial leather seats with seat heating and electric adjustment * Navigation system and Bluetooth hands-free kit * Comprehensive driver assistance systems including adaptive cruise control * Front and rear parking sensors with reversing camera * Complete service history with only two previous owners, exclusively Mercedes Special equipment includes: Stowage package, audio navigation system: COMAND Online, Driver Assistance Package Plus, traffic sign recognition system, belt feeder, Keyless Go start system, AMG Performance steering wheel in Dinamica, media interface (universal interface for iPod/AUX/USB/MP3), metallic paintwork, AMG Night Package, panoramic sliding sunroof, parking package, heated windscreen washer system, front seat heating, mirror package, AMG Performance sports exhaust system, Burmester surround sound system, mobile phone preparation/convenience telephony/LTE compatible Bdodpezwaiwofx Abteg Further features: Adaptive brake lights, deactivatable front passenger airbag, driver and passenger airbags, active bonnet, dashboard upper section in Artico man-made leather, electrically adjustable and heated exterior mirrors (both sides), front pelvis airbags, painted brake calipers, standard design and equipment line, stainless steel sport pedals, automatic headlight activation, illuminated AMG door sills, driver assistance system: Agility Select/Dynamic Select (drive mode switch), driver attention assist (drowsiness detection), collision prevention assist with braking function, hill start assist, remote boot lid release, electric parking brake, front apron, AMG floor mats, LED tail lights, rear apron, Mercedes me connect infotainment system, interior trim in aluminium, black headliner, interior lighting package, ISOFIX child seat anchors in the rear, two-door body, dual-zone automatic climate control (Thermatic), driver’s knee airbag, windowbag head airbags, enlarged fuel tank, diamond grille, alloy wheels, Mercedes-Benz emergency call system, 4.0-litre – 350 kW V8 engine, power dome bonnet, tyre pressure monitoring system, trip computer, split/folding rear seat backrest, Euro 6 emissions standard, front side airbags, electrically adjustable left and right front seats, Artico/Dinamica leatherette upholstery, AMG limited-slip differential, sports suspension.

Condition: used, mileage: 3,93,045 km, power: 355 kW (482.67 HP), first registration: 04/2022, fuel type: diesel, empty load weight: 7,580 kg, maximum load weight: 12,920 kg, overall weight: 20,500 kg, axle configuration: 4x2, wheelbase: 3,800 mm, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, number of seats: 2, Equipment: air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, Unladen weight: 7580 kg, permissible total weight: 20500 kg, tire size: 315/70 R22.5, 1st axle: , 2nd axle: , seats, fabric, interior color: gray, leaf-spring air suspension, tachograph, fifth-wheel coupling, electronic braking system EBS, electronic stability program ESP, automatic climate control, auxiliary air conditioning, adaptive cruise control ACC, comfort seats, driver's seat with air suspension, armrest for driver/passenger, seat heating, radio, audio interface, power steering, lumbar support, electric windows, outside temperature display, roof spoiler, exterior mirrors, curb mirrors, wide-angle mirrors, central locking, sun visor, cool box, hill start assist, daytime running lights, information and service system, speed limiter, storage compartment, upper and lower bunk, vehicle location: 01471 Radeburg. Errors and omissions excepted. Bodpfjzwq Rxjx Abtodg

Condition: used, mileage: 4,36,764 km, power: 355 kW (482.67 HP), first registration: 06/2022, fuel type: diesel, empty load weight: 7,580 kg, maximum load weight: 12,920 kg, overall weight: 20,500 kg, axle configuration: 4x2, wheelbase: 3,800 mm, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, number of seats: 2, Equipment: air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, Unladen weight: 7580 kg, permissible total weight: 20500 kg, tire size: 315/70 R22.5, 1st axle: , 2nd axle: , fabric seats, interior color: gray, air suspension, tachograph, fifth wheel coupling, electronic braking system EBS, electronic stability program ESP, automatic climate control, auxiliary heater, adaptive cruise control ACC, comfort seats, driver’s seat with air suspension, armrests for driver/passenger, seat heating, radio, audio interface, power steering, lumbar support, electric windows, outside temperature display, roof spoiler, electric exterior mirrors, curb mirrors, wide-angle mirrors, central locking, sun visor, cooler box, hill start assist, daytime running lights, information and service system, speed limiter, storage compartment, upper and lower bunk, vehicle location: 01471 Radeburg. Errors and omissions excepted. Bsdszwq R Sepfx Abtedg

Condition: used, mileage: 2,14,694 km, power: 103 kW (140.04 HP), first registration: 12/2015, fuel type: diesel, overall weight: 3,000 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, Year of construction: 2015, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Equipment: * Body/superstructure: Standard long wheelbase van, * Air conditioning, * Auxiliary heater (hot water) with parking heater function, * Fuel tank: 80 liters, * High cargo area partition with window, * Windows in the cargo area: - fixed front right, * Tailgate with glazing, * Wooden floor, * Cargo area lining, * Workshop equipment left & right, Technology: * Electrical package 1, * Electrically adjustable and heated exterior mirrors, * Driver assistance system: Parking assist rear, * Audio-navigation system Discover Media, * Mobile online services Car-Net, * Mobile phone interface and WLAN hotspot, Bsdpfszwrtbsx Abtjdg * Multifunction display, * 2nd battery, * Inverter, Safety/Environment: * 4x4 drive, * Airbag driver/passenger side, * ABS/ASR, * Driver assistance system: Multi-collision brake, * Suspension: Reinforced suspension and damping, * Trailer stabilization program, * Low emissions according to emission standard Euro 5, Other: * First delivery in Germany, * Engine 2.0 liters - 103 kW TDI, * Wheelbase 3400 mm, * Permissible total weight 3.00 t, * COC certificate available. Since 1972, your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen interchange. NutzfahrzeugZentrum Behnke constantly has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We would be pleased to accept your commercial vehicle/construction machinery in part exchange. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The listed equipment may need to be verified separately. Subject to errors and prior sale.

Condition: used, mileage: 1,10,000 km, power: 130 kW (176.75 HP), first registration: 01/2019, fuel type: diesel, overall weight: 5,500 kg, color: green, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,004 mm, total width: 2,098 mm, loading space length: 4,300 mm, Equipment: ABS, air conditioning, central locking, soot filter, Buy online. Finance digitally. Get it delivered nationwide. ----Chat now via WhatsApp: Get in touch with our sales consultant quickly and easily. Internal ID number: [ 3483 ]---- Your advantages with us: * Digital consultation via phone or WhatsApp * Financing options even without a down payment * Trade-in of your vehicle, whether old or new Optional extras: * 12-60 month used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (German vehicle inspection) * Nationwide delivery---- Summer offer: Upon request and for an additional charge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). Vehicle highlights: 19% VAT can be shown German vehicle Accident-free 1st owner Euro 6 standard Regularly serviced Immediately ready for use Maxi flatbed, 4,300 mm long Rear view camera Trailer coupling, 3500 kg Cruise control Automatic climate control Comfort driver's seat Bluetooth multimedia function Special equipment: Storage package 2, storage compartments: 2 DIN slot in the front under the headliner, interior lights in the cab: reading light in the front, airbag driver/passenger side, passenger airbag can be deactivated, trailer stabilization program, mobile phone interface Bluetooth, equipment package light + sight, automatic headlight activation, light assistant (coming home, leaving home), exterior mirrors electrically adjustable, heated and foldable, onboard tools and jack, remote key (2) foldable, floor mats cab: rubber, vehicle without type designation, interior lights in the cab: step lights, position lights (roof), spare wheel in driving condition, rear wall with window, interior mirror dimmable, windshield washer nozzles heated, display for windshield washer fluid level, mud flaps front and rear, mud flaps front, mud flaps rear, side airbag / head airbag driver side, seat cover / upholstery: artificial leather, seats in the cab: passenger double seat with storage / storage compartment and backrest that can be folded down into a table, seats in the cab: driver and passenger seats heated, seats in the cab: driver's seat comfort plus, front bumper in gray, preparation for tachograph and preparation for accident data recorder, winter tires additionally (customer information required) Additional equipment: Exterior mirror convex, left, exterior mirror convex, right, turn signals LED integrated in exterior mirror, floor covering in the cab: rubber, dual-tone horn, speed limiter system 90 km/h, grab handles A-pillars, interior lights in the cab: LED, body/structure: standard flatbed, radiator grille with chrome strip on top, steering column (steering wheel) adjustable, headlight range adjustment, truck registration, marker lights side, engine 2.0 Ltr. - 130 kW TDI, multifunction display Plus, rear fog lamp, wheelbase 4490 mm, low emission according to emission standard Euro 6, start/stop system engine, underrun protection front and side, underrun protection rear, underrun protection side, front axle reinforced, warning system for seat belt (driver side), thermal protection glazing, permissible gross weight 5.50 t ---- Do you want to lease or finance? We offer attractive offers – even without a down payment! Feel free to contact us. Contact: Phone: WhatsApp: Bsdszwtr Sspfx Abtjdg Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 am - 6:00 pm Sat: 9:00 am - 2:00 pm All

Condition: ready for operation (used), Year of construction: 2003, CNC Milling Machine OPS Type OPS HSC 600 Year of manufacture 2003 CNC control Andronic 3D path control with Ethernet interface Bdjdpjzwudiofx Abteg Travel distances X/Y/Z 625/375/350 mm Tool changer based on Erowa system, 40 positions Spindle speeds 5,000 – 40,000 rpm Fixed table, load capacity up to 600 kg Travel speed up to 20 m/min Repeatability 0.002 mm Tool changer, 32 positions Spindle HSK 32 E Drive power 9 kW Weight 3,500 kg Price: Euro 4,500.00 (plus VAT), ex works.

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction Bedpfezux Tpsx Abtjdg - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading Bdodpfxjzuygqj Abtog • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: ready for operation (used), Year of construction: 2005, operating hours: 7,500 h, spindle motor power: 18,500 W, spindle speed (max.): 3,500 rpm, travel distance Y-axis: 120 mm, overall weight: 5,800 kg, number of axes: 4, This 4-axis DMG Mori Seiki SL 2500 Y was manufactured in 2005. It features a maximum swing diameter of 755 mm and a machining diameter of 390 mm, with a maximum machining length of 655 mm. The machine includes a 12-station turret and a programmable hydraulic tailstock. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki SL 2500 Y turn-mill centre we have for sale. Contact us for further details. • Capacity & working area: • Max. swing diameter: 755 mm • Max. machining diameter: 390 mm • Max. machining length: 655 mm • Bar capacity: 75 mm • Rapid traverse: 18 m/min (X) / 24 m/min (Z) • Guideways: Box ways on all axes • Main spindle & headstock: • Spindle torque: 640 Nm • Spindle nose: A2-8 • Chuck: 250 mm Kitagawa B-210 (metric) • Cooling: Daikin spindle oil chiller • Turret & live tooling: • 12-station turret (all stations motorized) • Turret indexing time: 0.2 s • Live tooling speed: 4,000 RPM • Live tooling motor: 5.5 kW • Tooling system: Sandvik Capto quick change tooling system (valued at €22,000–€24,000) • Tailstock & axes: • Axis configuration: 4-axis (X, Z, Y, C) • Tailstock: Programmable hydraulic tailstock • Tailstock taper: MT5 Morse taper • Control, software & measuring: • 3D graphic simulation via proprietary CAM software • Cycle time verification • Automatic load control & tool wear monitoring • Tool measurement: Automatic Renishaw tool presetter arm • Connectivity: USB, PCMCIA, RS-232 Additional equipment • Bar feeder interface (machine prepared) • Interface for Autoblok hydraulic steady rest (ready for installation) • Automatic parts catcher • Hinge-type side chip conveyor • Large assortment of static and live tool holders • Dual foot pedal (main chuck & tailstock operation) • Electrical transformer • Complete documentation: Parts list, electrical schematics, programming & operating manuals Technical Specification Counter Spindle No Driven Tools Yes Bsdpfx Aszuymqobtsdg

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Bdedpfozuynhjx Abtog Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 1997, condition: used, Specification Data Manufacturer VDF Boehringer Bsdpfx Ajzw D I Rsbtedg Model VDF 250 Cm Year 1997 Serial No. 1114.3705-24 Machine type CNC turning center / CNC lathe Control Siemens Sinumerik 840C Design Slant-bed Tailstock No Swing over bed 550 mm Swing over cross slide 480 mm Maximum turning length 1,000 mm X-axis travel 405 mm Z-axis travel 1,099 mm Spindle bore 103 mm Spindle nose Size 8, DIN 55026 Front spindle bearing Ø 150 mm Maximum chuck Ø 315 mm Spindle power 53 kW (50% duty) Maximum spindle torque 780 Nm Spindle speed 30–3,000 rpm* Turret 12 positions Tool interface VDI 50, DIN 69880 Rapid traverse X/Z 10 m/min Maximum feed rate 10,000 mm/min Maximum feed force 15 kN Dimensions L × W × H approx. 5,400 × 3,200 × 2,400 mm Machine weight approx. 11,000 kg

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Bdjdpfx Aozuw H Iebtjg Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes Bdodezuw Ixspfx Abteg - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: used, Year of construction: 2019, New machine (used only for demonstration purposes in a school) Number of axes: 4 X-axis travel: 4000 mm Y-axis travel: 1670 mm Z-axis travel: 500 mm Spindle power: 12 kW, 24000 RPM * Number of axes: 4 * X-axis travel: 4000 mm * Y-axis travel: 1670 mm * Z-axis travel: 500 mm Technical specification * Spindle power: 12 kW * Spindle speed: 24000 RPM Additional information * Working area (maximum table size) * X: 3300 mm * Y: 1280 mm * Z distance: 250 mm * Spindle: * Tool interface: HSK F63 * Rated power at: approx. 12,000 RPM * Cooling: Air-cooled * Rotation: CW / CCW * Tool magazine * Linear tool magazine (side-mounted): 12 positions * Additional linear magazine on the portal: 4 positions * Max. tool diameter: 250 mm Bedpfszuxi Rex Abtedg * Max. tool length: 300 mm * Drilling unit * Model: DH 24 6H 2S * Vertical spindles: 18 (12 in X, 6 in Y) * Horizontal spindles: 6 (4 in X, 2 in Y) * Max. drill length: 70 mm * Max. tool diameter: 10 mm * Nut sawing machines: 2 (X and Y) * Max. saw diameter: 120 mm * Max. speed: 6,000 RPM * Vacuum table * 6 supports (instead of 4) * Two-circuit vacuum system * Height of vacuum suction cups: 100 mm * Pneumatic support locking * Adjustable side stops (Y-axis) * Axis system * X-axis: Rack and pinion drive * Y/Z-axis: Ball screw drive * Linear guides in all axes * Automatic central lubrication * Control and software * CNC control with CAD/CAM software * 3D simulation preview * DXF import function * Parametric programming * Remote maintenance package (internet-enabled)

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 7,500 W, spindle speed (max.): 3,200 rpm, Spindle moulder manufactured in 2008. This Colombo AM 60 features a robust design suitable for various woodworking applications. If you are looking to get high-quality woodworking capabilities, consider the Colombo AM 60 spindle moulder we have for sale. Contact us for further details. • Control: Computer / PLC-controlled • Display: 12" colour LCD-TFT • Interface: RS232 • Operating system: Windows • Saw unit – blade diameter: 400 mm • Saw spindle diameter: 30 mm • Saw blade speed: 3,000 rpm • Saw motor power: 3 kW • Tenoning spindle diameter: 50 mm • Effective spindle length: 600 mm Bodszvcqbopfx Abtsdg • Max. tool diameter: 320 mm • Effective travel: 550 mm • 1st profiling spindle diameter: 50 mm • 1st profiling spindle effective length: 600 mm • 1st profiling spindle max. tool diameter: 200 mm • 1st profiling spindle speed: 6,000 rpm • 1st profiling spindle motor: 7.5 kW • 1st profiling spindle effective travel: 550 mm • 2nd profiling spindle diameter: 50 mm • 2nd profiling spindle effective length: 600 mm • 2nd profiling spindle max. tool diameter: 220 mm • 2nd profiling spindle speed: 6,000 rpm • 2nd profiling spindle motor: 2.2 kW • 2nd profiling spindle effective travel: 550 mm • Glass bead spindle diameter: 35 mm • Glass bead spindle effective length: 20 mm • Glass bead tool diameter: 200 mm • Glass bead spindle motor: 2.2 kW • Tape/feeding carriage speed: 1–80 m/min • Safety enclosure: Sound-insulated safety guarding