Used Plastic Injection Press for sale (18,649)

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Godszca Uxepfx Anzjbn

Condition: excellent (used), Year of construction: 2004, Injection molding machine NEGRI BOSSI V1250 1,250 tons Year: 2004 Operating hours: 32,000 New screw and barrel Gbedpfx Anew Uaw Dezen

Condition: repair required (used), Year of construction: 2003, REP rubber injection press 25 Tons Year : 2003 Gjdpfxsizi H Hs Anzebn The 4 columns are to be changed (9000€ of expenses)

Condition: used, Year of construction: 2021, functionality: fully functional, clamping force: 2,500 kN, Arburg Allrounder 630A Multi Component Plastics Injection Moulding Machine (2021) Arburg Allrounder 630A 2500-800/400 L2, Gjdpfsygx Urjx Anzsbn 2500kN clamp force multi-component plastics injection moulding machine (2021) including 800 horizontal injection unit and 400 vertical injection units

Condition: used, Year of construction: 2007, operating hours: 2,568 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 4,900 kg, pressure: 200 bar, electrical fuse: 27 A, We offer this used LUX VM-TEC K50V4 baler for paper, foil, and plastics, year of manufacture 2007. The baler comes complete with conveyor. Model: K50V4 Year of manufacture: 2/2007 Production number: abba359 Serial number: Cont-000089 Power: 18.5 kW Current: 27 A Voltage: 400 V Frequency: 50 Hz Maximum pressure: 200 bar Weight: 4,900 kg Gjdpfjy H E R Isx Anzebn If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2022, Baling press for waste paper, paper, film, plastic, and other recyclable organic materials. Manufacturer: HSM Model: V-Press 825 plus pro - TCS system (TorsionControlSystem) – platen parallelism control - Automatic start/stop when doors are closed - Display + bale and operating hours counter - Manual tie-off (4 polyester straps) - Sliding door with handwheel locking mechanism Machine dimensions: 1700 x 1250 mm, height: 2370 mm Loading aperture: 1195 x 540 mm Bale weight: up to approx. 280 kg Bale dimensions: approx. 1200 × 780 × 700 mm Throughput: approx. 2–5 bales/h Year of manufacture: 2022 Pressing force: 250 kN Motor power: 4.0 kW Gbodpfx Aneyyy Dpjzon Machine weight: 1200 kg

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: MST-0800C0028, For sale: automatic plastic injection molding machine ATEC HQ-800QL. Year of manufacture – 2005 (04), Serial No. MST-0800C0028. Hydraulic system with digital control panel, suitable for serial production of plastic parts. Power supply 380 V, 50 Hz, 3 phases. Used, fully equipped, previously operated in production. Suitable for manufacturing technical, packaging, and industrial plastic components. Inspection on site possible. Gbsdpfxex Nhy Rs Anzjn

Year of construction: 2015, condition: new, We have a MATICA Espresso card printer available. This printer is bought by us in 2015 and has been standing in the showroom. Price new ist € 1.599,-, price now is € 999,- We have come to the conlcusion that this type of machinery is not the type of machinery we are able to offer as a distributor in a correct manner. Therefore this printer is new and has just printed max 10 cards in its life. Single or double side edge-to-edge Optional Magstripe and Smart Card encoder Ethernet and optional WiFi Prints up to 850 cards per hour 100-card feeder The Matica Espresso II is a compact and powerful desktop ID card printer, that is a brainchild of Italian design & engineering and reflects German reliability in consistent performance. The Espresso II offers great value and versatility with extraordinary printing speed and outstanding print quality. With its robust and durable construction, the Espresso II looks and works great in any office or card production environment. The Espresso II is a single side desktop ID card printer for projects needing printing only on one side. The Espresso can be field-upgraded to easily double the printing capacity with the duplex printing feature. Any Espresso II printer can evolve to duplex anytime, anywhere without the need to install additional hardware components. Contact and contactless smart card encoding are also field-upgradable features. LED status indicators on the front of the printer allows you to monitor the card production process at a distance, and the blue LED light on the card hopper door keeps you aware of your card input availability in real time. You can also use optional single card manual insertion for individual card printing as needed. Each printer comes with a rear output hopper to catch full card runs as needed, which can improve the throughput speed in higher volume scenarios. In standard setup, having front-side input and output trays is also convenient for situations where space is limited, in a desktop environment, a cabinet or under a counter. Each Espresso II printer also has the option for inline magnetic stripe, contact chip or contactless smart card encoders, to maximize its functionality for a broader set of application uses, such as access control, time & attendance, payment services, and many more. Gbsdsfnldqspfx Anzjn The entire line offers Ethernet connectivity and optional WiFi making printing and encoding convenient and trouble-free. You can easily define your printer and choose the one that perfectly matches your current needs, as Espresso II offers a vast range of options. Whether or not your requirements evolve in the future, you have still the possibility of making an upgrade by adding functionalities to your existing configuration. The new printer line works perfectly for a wide variety of applications such as Employee and Membership ID Badges, Service and Benefits Cards, Gift and Loyalty Cards, Access Control Cards, Student IDs, and Transit Cards, just to name a few. The Espresso II is available with different specifications ​— modules, encoding, color, etc..

Condition: used, Year of construction: 2004, Compressor type: Oil-injected rotary screw compressor with integrated refrigerant dryer Motor power: 15 kW (20 HP) Power supply: 380 V / 50 Hz Operating pressure: 7.5 bar Free Air Delivery (FAD): 798 m³/h (approximately 13.3 m³/min) Noise level: 68 dB(A) Tank capacity: 400 liters Gbedpfxowgca Tj Anzjn Dimensions (L × W × H): 1,000 × 660 × 1,400 mm Weight: 450 kg Cooling: Air-cooled Integrated dryer: Yes Control system: Elektronikon®

Condition: good (used), Impress HM 4 Hot Stamping Press This machine is in very good condition and ready to use. This machine is from the popular Impress hot stamping machine manufacturer, manufactured in the UK. Description The Impress hot stamping press is a hot stamping and embossing press for paper and plastics. It’s a useful device in any advertising agency or digital printing house. The manual press is powered by only 230V. A powerful press with adjustable pressure ensures repeatability and very high pressure between the die and the material. The machine features a worktop with a slide-out function, adjustable embossing depth, a heating plate with a thermostat, and an automatic foil feed. Gsdpezday Refx Anzsbn Specifications: Heating temperature control via thermostat Heating plate pressure mechanism: mechanical Press force: 1000 kg Power consumption: 500 W Power supply: 230 V Machine weight: 50 kg Plate size: 150 x 150 mm.

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Gsdpfxozdau Us Anzobn Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Gsdpfxezdat Re Anzebn Pressure: 3 tons Made in Germany.

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Gedpszdatqofx Anzebn Approximate format: 480 x 330 mm 3-ton pressure

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: Gbedpfxjx Eg Upe Anzjn You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press Gbsdpfxovzxpue Anzon with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc) Godpfx Astndu Uenzjbn

Condition: used, Year of construction: 2011, operating hours: 13,000 h, functionality: fully functional, clamping force: 39,240 kN, screw diameter: 245 mm, clearance between the columns: 2,250 mm, injection pressure: 1,200 bar, injection weight: 47,685 g, overall weight: 3,20,000 kg, heating capacity: 354 kW (481.31 HP), MANUFACTURER REAL PRESS Model / Type RP 4000 T Üretim Yılı / Production Year 2011 Üretim Yılı / Made In Italy Kalıp Sıkıştırma Kuvveti / Mould Clamping Force (kN) 39240 Kolon Arası Mesafe / Space Between Tie Bars (mm) 2250*2250 Vida çapı / Screw Dıameter (mm) 245 Godpfx Ansylwz Iozjbn Enjeksiyon Basıncı / Injection Pressure (bar) 1200 Maks. Short Ağırlığı / Maks. Shot wightPS (gr) 47685 Isıtma Kapasitesi / Heating Capacity (kW) 354 Pompa Motoru / Pump Motor kW 132+132+132+30 Toplam Güç / Total Power (kW) 790 Mak. Kalıp Kalınlığı / Max. Mould Thickness (mm) 2200 Min. Kalıp Kalınlığı /Min. Mould thickness(mm) 1000 Makine Ölçüleri / Machine Dimension LxWxH(m) 22×45×50 Makine Ağırlığı / Machine Weight(ton) 320 Vida Stroğu / Screw Stroke (mm) 245 Mak. Erimiş Plastik Miktarı / Max.Shot Molten plastic weight(gr) 34333,2 "Mak. Atış ağırlığ PE /Max. Shot weight per 1mm (gr)" 140,1355102 Sabit Flanş Ölçüsü / Fixed Side Flange Size ᴓ250 Hareketli Taraf Flanş ölçüsü / Moving Side Flange Size ᴓ250 Robot VAR

Condition: new, Year of construction: 2025, functionality: fully functional, degree of automation: automatic, Pneumatic press for raw dried delicacies. Made completly of stailes steel. Powered by air- 6 bar Measurments: by client demands Gbsdpewqcbfjfx Anzon

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h Gbedpfx Ajtxinaenzen The price refers to one line (exstruder+press)

Condition: used, functionality: fully functional, This listing is for a used “Xerox Colour J75 Press” color production system Items for sale: 1 x Xerox Colour J75 Press with the following features: Includes Fiery EX C75 Includes A-CF01 paper deck Includes Bros-Finisher + LFN-7+JGW Not the right configuration? It’s no problem to configure the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 1,272,538 pages Color: Approx. 1,099,543 pages Black: Approx. 172,995 pages Condition: This is a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Gedpfx Anoza Db Dszebn Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, This listing is for a used “Xerox Versant 180 Press” color production system Items included: 1 x Xerox Versant 180 Press with the following features: Includes Fiery E300-5 Includes Paper Deck A-CF01/A-GW03 Includes Booklet Finisher A-FN13 Not the right configuration? It’s no problem to configure the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 729,330 pages Color: Approx. 505,865 pages Black: Approx. 223,465 pages Condition: This is a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Gedpfx Anoza A Eujzjbn Seaworthy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox Iridesse Production Press’ colour production system Items for sale: 1 x Xerox Iridesse Production Press with the following specifications: Includes Fiery Server EX-P6 Includes paper decks A-CF03 + A-CF04 Includes stacker Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 14,303,610 pages Colour: Approx. 14,006,634 pages Black: Approx. 296,976 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly. Gedpozap Sbsfx Anzjbn

Condition: not inspected (used), Tank, Plastic Tank, Liquid Storage, Liquid Tank, Used Machine Overall dimensions: Height 2500 mm Diameter 2000 mm Tank Capacity: 6 m3 Material: PE (Polyethylene) Manhole Diameter: 580 mm Gbsdpfxsra Daho Anzen Liquid Drain, Filling Pipe Diameter: 100 mm There is no liquid level indicator, and we have not conducted a leak test on the tank. There are several pieces

Condition: excellent (used), functionality: fully functional, working width: 1,400 mm, plate length: 3,500 mm, stroke length: 450 mm, Automatic Hydraulic Pressing Line with Heated Platens – Excellent Condition We offer a complete industrial pressing line with a fully automatic continuous cycle (loading – pressing – unloading and stacking), ideal for the production of 2- and 3-layer parquet, veneering, engineered flooring, and other wood-based applications. Technical Specifications: Work platen dimensions: 3500 x 1400 mm Heavy-duty drilled solid steel platens Opening stroke: 450 mm Heating system: diathermic oil boiler (capacity: 200 liters) 6 large-diameter pistons – top-down pressing Platen height from floor: 800 mm Platen closing time: 1–2 seconds Opening/closing cycle time: 2–3 seconds Working pressure: 10 kg/cm² Installed power: 10 kW Gbjdpfowiw Uqjx Anzjn Automatic loading conveyor Unloading roller conveyors Robust frame made of seamless steel sheets Independent electrical control panel The machine is in excellent working condition. Its heavy-duty construction ensures reliability and durability in demanding industrial environments. Price: negotiable Feel free to contact us for more information, photos, or to schedule a machine inspection

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t Gedpfx Aovuuknonzsbn stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication