Used Profile Bending Machine for sale (67,092)

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 925307, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: roundo, number of rollers: 3, input current: 380 A, input frequency: 50 Hz, Equipment: CE marking, emergency stop, hardened rollers, Roundo R5S used condition , working 100% . Base in Thailand . Fsdpeyqxmvsfx Adaspd

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm Fjdpfx Aex Anpvjdajpd T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 450 kg, input voltage: 400 V, total length: 900 mm, total width: 850 mm, total height: 1,700 mm, Technical Specifications Material: round / rectangular tube: 70 × 2 mm / 60 × 60 × 3 mm Material: round / square bar: 35 mm / 35 × 35 mm (diameter) Roller diameter: 50 mm Motor power: 2.2 kW Power supply: 3-phase, 400 V Dimensions (L × W × H): 900 × 850 × 1700 mm Weight: 450 kg Delivery Terms The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. Fpodpfxeytffws Adasd If you are interested in other machines, we encourage you to visit our website.

Condition: used, Year of construction: 1981, Technical details: work height max.: 1100 mm voltage: 380 / 50 V shaft diameter: 100 mm total power requirement: ca. 15,1 kW Fodpfxowh Rq Nj Adaopd weight of the machine ca.: 4,5 t dimensions electric cabinet LxWxH: 1,2 x 0,64 x 1,4 m dimension machine xH: 1,5 x 1,6 x 1,3 m The profile round bending machine can be used for bending thick-walled steel profiles, steel beams and steel rails. The machine works on two gears: 0-4 rpm and 0-6,5 rpm. - 1x driven bending roller can be adjusted vertically by 140mm and - 2x drive rollers with centre distance 360mm - Right and left rotation of the rollers possible Equipment: - Hydraulic power unit, manufacturer TOS - control panel accessories: - various bending rollers without profile *

Condition: good (used), functionality: fully functional, Year of construction: 1997, Used profile bending machine from Sahilner Model: PK 40 Shaft diameter: 40 mm Fedpsytb Afefx Adajpd 3 driven rolls Including various tools Year of manufacture: 1997

Condition: used, Year of construction: 1976, Profile bending machine IRLE - B 160 HH Technical data on photo Fpsdpfx Adeytn E Tsajd

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Width:1900mm Height:2200mm Weight:2900kg Fpsdjycu E Ejpfx Adajd

Condition: excellent (used), Year of construction: 2013, controller manufacturer: ELFRAN Digital Read Out, number of rollers: 3, shaft diameter: 130 mm, overall weight: 5,800 kg, total length: 2,200 mm, total width: 2,400 mm, total height: 2,000 mm, Profile bending machine FACCIN - RCMI 130 MACH-ID 9451 Make: FACCIN Type: RCMI 130 Control: ELFRAN Digital Read Out Year: 2013 3 rolls driven 2 lateral guide rolls Digital readout for position rolls Set hardned universal rolls Fodpeyrq Dvjfx Adaepd Set hardned profile rolls Horizontal and vertical:|Horizontal and Vertical Shaft Ø: 130mm Number of rolls: 3 Capacity flat: 240 x 30 x 1000mm Capacity Tube: 140 x 5 x 1500Ø x mm Capacity bar: 80 x 80 x 900mm Capacity T-Profile: 140 x 15 x 1400mm Capacity HEA-Profile: 160 x 1700mm Working speed: 0 - 6000mm/min. Side supports: 2 x Hydraulic side arms Length: 2200mm Width: 2400mm Height: 2000mm Weight: 5800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Shaft diameter 40 mm 138 mm Upper shaft diameters 138 mm Fsdpfxeyn R Ugo Adaopd engine output 1,1 / 380 kW / V work speed 6 m/min weight of the machine ca. 230 kg required space 750 x 600 x 1400 mm The Gerd Wolff PK 40 is a pipe bending machine which is produced for our GERDWOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories and technical details - Sheet metal frame - 2 bottom rolls are driven - Direct drive power - Upper roller is idle (free rotation) - Hardened rollers - Hardened shafts made of special steel material - Standard rollers - Adjustable guide rollers - Horizontal and vertical working position Optional equipment - Tube bending rollers - Profile bending rollers - Angle bending rollers - Digital readout - Optional lateral angle guides

Condition: used, total length: 1,000 mm, total width: 750 mm, total height: 1,400 mm, Empty weight: 400 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 Fpsdpfx Asypk Ebjdasd - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Moment of resistance [cm³]: 6 - Top roll diameter [mm]: 50 - Bottom roll diameter [mm]: 50 - Capacity diameter round [mm]: 35 - Transport dimensions: 1000mm x 750mm x 1400mm (l x w x h) - Transport weight [kg]: 400kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. Fedpfjd E A I Ijx Adaopd If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: good (used), Technical data: 2 hydraulically adjustable rollers 3 driven rollers Roller diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Fsdpfxeytyf Ss Adaspd Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can work horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Sahindler - Scantool profile bending machine Model PV 60 NC Year 2019 - New / Demo Roll diameter : 215 mm. Capacity flat iron : 120 x 25 mm. Capacity flat iron on edge : 80 x 20 mm. Capacity angle iron: 70 x 7 mm. NC control 1 set profile bending rolls Hydraulic top roll movement Fpedpeytb U Uefx Adasd Bending support Footpedal

Condition: good (used), Year of construction: 1962, Manufacturer: VEB Type: RV16 Machinable cross-section: 120 x 140 mm Weight: 2,7 t Fpodsltiy Tjpfx Adaod

Condition: new, angle steel/side length / mm double T-iron on the x-axis / mm U-iron on the x-axis / mm Fedpeyk Im Eofx Adaepd total power requirement 4/380 kW weight of the machine ca. 1645 kg required space 1500 x 1000 x 1400 mm The Gerd Wolff HPK-80 is a hydraulic profile and tube bending machine with 3 rollers. The machine is ideal for bending profiles, tubes and similar material. Model: HPK 80 Upper shaft diameter: Ø 80 mm Bottom shaft diameter: Ø 70 mm Roll diameter: Ø 245 mm Working speed: 7 m/min Motor power: 4.75 kW / 380 V Dimensions (L x W x H): 1500 x 1000 x 1400 mm Weight: 1645 kg Standard accessories Steel construction welded frame 3 Rolls are powered Hardened and ground shafts made of high tensile special steel Rolls are hardened and ground Horizontal and vertical working position Hardened standard rolls Mobile control panel 3 Axis mechanical lateral angle guide rolls Brake motor equipped for the precision bending Digital Read-Outs (2pcs) Optional Equipments Pipe, tube and profile bending rolls Hydraulic lateral guide rolls (2 axis) Automation with NC control

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Fpjdpfx Adoyi Hrwoaod Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Very high empty weight for optimum stability during operation. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max. pipe bending range up to 50 mm. The bending machine allows work in both vertical and horizontal planes. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal various roller sets DTR in Polish CE declaration Technical data Material: round tube [mm] 50 x 2 Material: rectangular profile [mm] 50 x 50 x 2 Fpjdpfx Asu Snm Iedaod Material: round bar [mm] 35 Material: solid rectangular piece [mm] 35 x 35 Diameter of rollers [mm] 40 Motor power [kW] S1 1.5 / S6 2.2 Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 900 x 850 x 1700 Weight [kg] 485

Condition: new, Year of construction: 2026, Electric pipe bending machine without mandrel. Accurate and efficient machine for bending steel, copper, aluminum and brass pipes. The possibility of selecting the optimal bending radius allows for obtaining high-quality results without deforming the material. The presented bending machine is very easy to use. Pipe benders are devices used in individual and small-series production of parts in the automotive, furniture, architecture or garden tool industries. The main bending die is driven by a reduction gear, an electric motor. The device can work in two modes: manual and semi-automatic. The simple and durable design ensures long-term, trouble-free use. Standard equipment digital reading of bending angle The BENDMASTER 40A machine is equipped with dies for pipes with a diameter of: 16; 20; 25; 32; 38 mm Fpjdpfxovugx Do Adajd Technical data MAXIMUM BENDING ANGLE 180° DIY ROTATIONAL SPEED WHEN BENDING 5 rpm MAIN MOTOR POWER 1.5 kW EXTERNAL DIMENSIONS OF THE DEVICE 720 x 500 x 1030 mm WEIGHT 330 kg For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - Lower two rollers are moved hydraulically - Three rollers driven - Hydraulically adjustable guide rollers - 2 digital displays - Brake motor Fsdog Sr I Ujpfx Adaepd - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, rotational speed (max.): 50 rpm, - Ring bending machine – Shaft diameter 50 mm – The top roller is moved hydraulically – Digital display – Can be used horizontally/vertically – Foot control – Emergency stop – Documentation Fodelp Ryhepfx Adaspd – 400 V

Condition: new, Year of construction: 2025, shaft diameter: 30 mm, - Shaft diameter: 30 mm - Rotates both clockwise and counterclockwise - Usable horizontally and vertically - Foot operation - Emergency stop - Documentation - 400 V Fsdpfsxgb A Dox Adaopd

Year of construction: 2019, condition: used, functionality: fully functional, Profile and tube bending machine. Sets of rolls for pipes 1/2", 3/4" and 1". Fpodpfx Ajymmd Iedajd

Condition: new, Ring-profile bending machine Akyapak APK 81 I-steel - upright 100 x 20 (d 2100) mm raw diameter max. 100 x 3 (d 3000) mm angle steel 80x80x8 (d 2000) mm square steel 50 x 25 x 2 (d 600) mm I - steel - flat 120 x 30 (d 600) max.140b mm solid material - diameter 60,0 (d 1000) mm tool holder 80,0 mm Speed 4,2 m/min. Weight 1.600 kg Fodpfx Adod R Iqujaopd Dimension L-W-H 1240 x 1375 x 1540 mm Equipment: hydr. roller drive planetary gear feed of the 2 lower rollers for extra small bending radii hardened tool holder (42CrMo4) standard roll set, hardened mobile control panel 3 driven rolls digital display machine can be used horizontally and vertically CE-sign / declaration of conformity Operating instructions in German

Condition: new, Ostas Profile Ring Bending Machine OPK 125 Technical Specifications: • Tool holder, shaft: 120 mm • Tool: 390 mm • Working speed: 2-7.5 m/min • Motor: 15 kW • Dimensions (L-W-H): 2000 x 1700 x 1950 mm • Weight: 4850 kg • 3 rollers are driven separately by a hydraulic motor and planetary gearbox • Hardened standard rolls • Hardened and ground tool holder, shaft Fodpjxrd Rnjfx Adajpd • Mobile control panel • Horizontal and vertical working position • Hydraulic side supports • Digital displays (2 pcs.) • In accordance with CE standard

Condition: new, Akyapak Akbend ring APK 35 profile bending machine Description •. base • horizontal and vertical working • Foot switch • Standard rolls (shared) • 2 driven rollers • CE mark / conformity declaration • User manual in German Technical details • I - steel - flat: 120 x 15 (d 750) mm • I steel upright: 60 x 10 (800 d) mm • Angle steel: 50 x 5 (1200 d) mm • Round material: 35.0 (800 d) mm Fpsdpfed Er S Iex Adaod • Max size: 70 x 2 (1200 d) mm • Square material: 50 x 40 x 3 mm • Bending speed: 4.3 m / min • Diameter of the roller - top: 155 mm • Bore: 50.0 mm • Total power: 1,5 kW • Weight: 320 kg • Dimensions L W H: 730 x 830 x 1350 mm