Used Promac Fx 380 for sale (4,466)

Condition: good (used), Year of construction: 2018, functionality: fully functional, Siemens 828 chop-mill Palett 650x400 mm Ijdpfx Asy S Ubtofuoth X/Y/Z 560/360/480 mm 24.000 v/min, BT 30 Big plus ATC 20 pos.

Condition: excellent (used), Year of construction: 2015, operating hours: 14,000 h, Chiron Mill FX 800 machining center with 148-position background magazine TECHNICAL DATA Travel, X-axis: 800 mm Travel, Y-axis: 630 mm Travel, Z-axis: 550 mm Swivel axis: +- 120 ° Rotary axis: 360° Rapid traverse speed, X-axis: 60 m/min Rapid traverse speed, Y-axis: 60 m/min Rapid traverse speed, Z-axis: 60 m/min Spindle, max. torque: 180 Nm Spindle power: 17.0 - 47.2 kW Spindle, speed: 12`000 rpm Tool holder: HSK-A 63 Rotary table, diameter: 280 mm Thread and fitting hole pattern M16 x 15 H7 X 50 Load capacity: 320 kg SCOPE OF OFFER U.A: (list not exhaustive): Chiron machining center, Year of construction: 2015 Knoll chip conveyor 750 K-1/150 BMF TPF 350S high-pressure pump Renishaw RLP40Q touch probe Receiver: Renishaw RMI-Q Mechatronic flow sensor SB0500 Background magazine, 148-fold Operating documentation Itsdjtvz Azspfx Afush Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total length: 690 mm, total width: 1,150 mm, total height: 1,670 mm, overall weight: 258 kg, conveyor belt width: 750 mm, Equipment: chassis, New machine with a 24-month warranty. Advantages: + Excellent price-performance ratio + Robust long roller for baguettes + 3 polypropylene smoothing cylinders with chain drive + With a secured feed hopper; the feed shaft is covered + Additional protection to prevent interference with the rollers + With a safety switch on the feed hopper, which immediately stops the machine (see video!) + Conveyor belts made of felt + Simple, mechanical adjustment of the long roller settings + Fast spare parts supply within 1-2 working days SPECIAL accessories, optionally available at an extra cost: - Mobile frame: + EUR 400.00 net --- Painted frame, with 2 storage compartments under the machine --- With 4 swivel castors, 2 of which have brakes - Guide for loaf bread: + EUR 500.00 net Technical data: - Long roller width: max. 750 mm - Weight range: 50 - 1,200 g - Hourly output: approx. 1,200 pieces (depending on the dough) - Motor power: 0.55 kW - Connection values: 400 V - 3-phase - 50 Hz - 16A CEE plug - Dimensions: 115 x 69 x 167 cm (W x D x H) - Feed height: 144 cm - Machine height: approx. 75 cm (without frame) - Net weight: 258 kg Itodpshyda Ijfx Afush

Condition: used, machine/vehicle number: 008514, Max. panel width: 4250 mm Max. panel length: 4300 mm Main saw blade projection: 95 mm No of Grippers: 7 Second flexible pusher: yes Itsdsy Edn Aepfx Afuoh

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total length: 690 mm, total width: 990 mm, total height: 1,580 mm, DGUV certified until: 05/2028, overall weight: 258 kg, input frequency: 50 Hz, type of input current: three-phase, Baguette - Long Roller Sinmag Model: SM2-380 S Capacity: min. 50 - max. 1200 g depending on dough hydration with felt belts for soft doughs 3 feeding rollers for increased dough tension Rolling width: up to max. 750 mm Itedpfsu Rz Dwsx Afujh simple technology for consistent quality! stainless steel construction DGUV V3 safety tested – only with us Connection: 400V, 16A CEE plug Dimensions: 990 x 690 x 1580/1730 mm (with frame), WxDxH NEW Machine, SAB tested 24 months warranty + spare parts service Option: Maintenance contract Spare parts box Service package Guide for sandwich bread Delivery service Instruction & commissioning Leasing & rental machine service We have a large selection of bakery machines in stock for you!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 400 V, DGUV certified until: 05/2028, total width: 600 mm, total length: 640 mm, total height: 850 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 16 A, power: 8 kW (10.88 HP), Hobart Dishwasher All in NEW Condition Hobart Dishwasher FXLSBÄKO-10C Fresh water consumption: 2 liters Easy Clean System Rinse aid and detergent dosing pump Extra deep interior for trays 600 x 400 mm Included accessories: 1 plate rack, 1 universal rack, cutlery basket with 4 compartments, inlet and drain hoses, non-return valve Drain/wash pump Iedpfsxbm Tkex Afusth Connection: 400 V, 16A CEE plug Dimensions: 600 x 640 x 820 mm (W x D x H) NEW machine with warranty and spare parts service Quality from a specialist dealer! Benefit from over 35 years of experience! Many more dishwashers in stock!

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Itedpfsy D Adtsx Afujh Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: used, mileage: 4,00,000 km, power: 280 kW (380.69 HP), first registration: 07/2005, fuel type: diesel, overall weight: 36,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, SCANIA 114 G 380 8 x 4 HIAB CRANE 2 x LIFT AXLE *ROLL-OFF TIPPER----VEHICLE HISTORY * VEHICLE ORIGINATES FROM THE NETHERLANDS * DELIVERY TO ALL PORTS POSSIBLE UPON REQUEST VEHICLE EQUIPMENT * MANUAL GEARBOX * RETARDER * STEERING AXLE * CRUISE CONTROL * 2 X LIFT AXLE * HIAB LOADING CRANE * TYPE: 105 Z * 7.8 M LONG * TRAILER COUPLING * ROOF SPOTLIGHTS * TOOL BOX * GVW: 36,000 KG * PAYLOAD: 15,032 KG * VERY GOOD TYRES * IMMEDIATELY OPERATIONAL FOR MORE INFORMATION: ----EXPORT DECLARATION, CUSTOMS EXW WITHIN 10 MIN. (APPROVED EXPORTER) 5 DAY, 15 DAY, 30 DAY LICENSE PLATES, AND 15 DAY AUSTRIAN PLATES EURO 1 TECH. DATA SHEET (DATA TECNICI) RESERVATIONS FOR VEHICLES ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied. Subject to change, error, and prior sale! More vehicles can be found on our website. Sale only according to our General Terms and Conditions – see website Important note – Important information: Despite careful verification of all details in our offer, errors may occur. Some may be due to transmission errors in the systems of the various platform providers. Therefore, we point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer in terms of §145 BGB. Rather, it is for information purposes regarding contract initiation. The information provided here is without guarantee and does not constitute warranted characteristics. Iedpfsy Sq Ehex Afujth

Condition: used, centre distance 1.270 mm turning diameter over bed 380 mm turning dia. over slide 230 mm centre height 190 mm spindle tunring speed 45 - 2.000 U/min bed width 200 mm Bed height 2.120 mm bed length 305 mm spindle bore 52 mm dimensions 2,70 x 1,00 x 1,60 m machine weight ab. 1.200 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - 3-axis digital readout - 3-jaw chuck with internal and external grips - 2 live centers - 1 fixed center - 4 quick-change tool post - 1 steady rest - Drill chuck - Machine feet Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Itedpfx Afey A Tc Rsuoh

Condition: good (used), Year of construction: 2012, power: 3.7 kW (5.03 HP), Well-maintained semi-automatic bandsaw Knuth model HB 380, year of manufacture 2012 Cutting Capacities Cutting capacity 90° (rectangular): 520x380 mm Cutting capacity 90° (round): 380 mm Cutting capacity 90° (square): 380 mm Cutting capacity 45° (rectangular): 300x380 mm Cutting capacity 45° (round): 300 mm Cutting capacity 45° (square): 300 mm Cutting speed: 20 - 100 m/min Power: 3.7 kW Blade dimensions: 4,800x34x1.1 mm Dimensions: 2,850x1,660x930 mm (W x H x D) Iodpfsyxw H Ejx Afujth - Hydraulic workpiece clamping - Automatic lift height adjustment Shipping can be arranged upon request.

Condition: used, Year of construction: 2023, operating hours: 22 h, functionality: fully functional, machine/vehicle number: 61035145, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 393 cm³, injection pressure: 2,429 bar, injection weight: 140 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 120 mm, opening stroke: 950 mm, installation height: 450 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 6,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 6,00,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you here our certified and highly flexible stock machines: The base model injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, user-friendly operation, and short lead times. It is suitable for a wide range of applications, including packaging, electrical and electronics industries, medical technology, and automotive manufacturing. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Meeting demanding delivery schedules with a base machine concept offering a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM ▪ MC P1 with 15" TFT colour screen and multitouch functionality CLAMPING UNIT ▪ Clamping force: 1,200 kN ▪ Maximum mould opening force: 180 kN ▪ Clear space (h x v): 520 x 470 mm ▪ Mounting platen (h x v): 690 x 640 mm ▪ Mould installation height min. - max.: 180 - 450 mm ▪ Maximum opening stroke: 850 mm ▪ Maximum mould opening path: 450 mm ▪ Ejector drive: electric ▪ Ejector stroke: 120 mm ▪ Ejector force forward/backward: 27 / 33 kN ▪ Ejector speed forward/backward: 300 / 300 mm/s ▪ Maximum mould weight: 850 kg Itodpfey Rmwdjx Afuoh INJECTION UNIT ▪ Screw diameter / type: 35 mm / standard ▪ Effective L/D ratio: 22.9 ▪ Injection pressure: 2,429 bar ▪ Stroke volume: 154 cm³ ▪ Shot weight at max. stroke (for PS): 140 g ▪ Injection speed: 200 mm/s ▪ Injection flow rate: 192 cm³/s ▪ Screw drive / rotation speed: 374 rpm ▪ Plasticising rate (standard screw): 18.9 g/s ▪ Nozzle contact force: 34 kN ELECTRICAL PARAMETERS ▪ Connected load: 22.7 kW ▪ Installed heating power: 11.5 kW ▪ Power supply: 200 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS ▪ Net weight with control cabinet: 6.7 t ▪ Length x width x height: 5.18 x 1.76 x 1.90 m ADDITIONAL EQUIPMENT ▪ Wear-resistant plasticising unit ▪ BluePower full insulation for plasticising cylinder ▪ Open nozzle ▪ Air valve, single (BWAP) ▪ Pneumatic hot runner shut-off control, single ▪ Electrical interface for pneumatic cascade, 4-fold ▪ Euromap interface for handling: E18 + E67 ▪ Euromap central computer interface: E67, E77 ▪ Water manifold, 4-fold ▪ Electrical provisions for hydraulic auxiliary unit ▪ Automatic central lubrication ▪ Adaptive Process Control (APC) ▪ Injection-compression moulding mode ▪ Graphic analysis package ▪ Swivelling injection unit The machine is located at our Parsdorf facility and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner Iedpfsyrd U Uox Afusth - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 3,000 h, SCM Accord 40 fx – CNC Machining Center for Timber Construction (Complete description available in the attachment) Used Machine, Year of Manufacture: 10/2022 Consisting of: - R21431 Accord 40 fx – Working field X-Y = 9000 x 1905 mm, Z = 350 mm, quantity: 1 - OF0158 Usable pass-through height Z = 350 mm (with H50 vacuum cups), quantity: 1 - OF0165 Traversing speed on all axes, Accord 40 fx (PRO-SPEED version), quantity: 1 - OF0168 Pendulum operation, quantity: 1 - OF0169 Automatic axis lubrication, quantity: 1 - OF0299 TELESOLVE remote maintenance via Internet, quantity: 1 - 450328 eye-M PRO operation console with integrated PC, quantity: 1 - 450291 Additional fixed operator panel, quantity: 1 - 870068 TECPAD – remote control for machine functions, quantity: 1 - 560058 No. 10 MATIC support rails, L1825, quantity: 1 - 230237 MAXI working unit – Prisma T, quantity: 1 - 870031 Chip hood on the electric spindle, adjustable, quantity: 1 - 870109 Preparation for angle gear "Prisma T-S", quantity: 1 - 470014 Air nozzle for tools, quantity: 1 - 870119 Tool length measuring device, quantity: 1 - 870016 BRC working unit, quantity: 1 - 510014 Jaw preparation H145 for worktable with 10 support rails, quantity: 1 - 480178 Front stop row H110 for worktable with 10 support rails, quantity: 1 - 480105 Rear stop row H110 for worktable with 10 support rails, quantity: 1 - 480137 First lateral stop row H110 for worktable with 10 support rails, quantity: 1 - 480005 Vacuum cup H110 145x145 mm, quantity: 12 - 480006 Rotatable vacuum cup H110 145x55 mm, quantity: 8 - 480018 Rotatable vacuum cup H110 145x30 mm, quantity: 5 - 480049 Rotatable vacuum cup H110 200x40 mm, quantity: 5 - 480149 First lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480153 Second lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480107 Round pneumatic clamping cylinders H145, quantity: 8 - 480108 Square pneumatic clamping cylinders H145, quantity: 30 - 480111 No. 6 lifting devices with double stroke H145, quantity: 1 - 450289 Laser and reference stop H145 for arcs (left), quantity: 1 - 350016 Vacuum pump 250 (300) m³/h – 50 (60) Hz, quantity: 1 - 190046 PRO-SPEED safety system, quantity: 1 - 210057 TRC 48 – rear-side tool magazine, quantity: 1 - 210190 MACH 5 – quick-change system, quantity: 1 - 870236 RTCP setting – self-calibration system for Prisma working unit, quantity: 1 - Air conditioning for the control cabinet, quantity: 1 - 450288 Safety enclosure with vertical ON-OFF adjustment, quantity: 1 - 210852 SCM angle head HSK 63E – underfloor milling unit, quantity: 1 - OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE, quantity: 1 - OF0543 Operating system Windows 10 embedded 64 bit, quantity: 1 - OF0422 Machine control interface software Maestro cnc, quantity: 1 - OF0435 Hardware dongle for Maestro cnc, quantity: 1 Iodpjyzgxcsfx Afuoth - 524309 Maestro 3D-Advanced module, quantity: 1 - 630359 Additional hardware dongle for Maestro cnc (for USB port), quantity: 1 - 523687 ProView simulation software, quantity: 1 - 109993 MACHINE LANGUAGE: German, quantity: 1 - SPEC01 Special design – Special Accord 9 meter processing in X - SPEC02 Special design – 2 pieces push-in double-stroke aids H145 - SPEC03 Special design – Spare spindle Maxi-Prisma-T

Condition: excellent (used), For sale: Electric motor from German manufacturer Dietz Motoren GmbH Condition: Used, in good technical condition Motor is fully functional Visible storage marks and rust present on the housing and flange Visual condition as shown in the photos Technical data Manufacturer: Dietz Motoren GmbH Model: FDR 132SB 2Q Power: 7.5 kW Speed: 2920 rpm Supply voltage: 380 V Current: 15.5 A Frequency: 50 Hz Ijdpfx Afsyv Uvfeuoth Protection class: IP54 Insulation class: B Duty cycle: S1 Approximate dimensions Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Ideal for pumps, fans, industrial machinery, and drives

Condition: used, machine/vehicle number: 007669, Max. panel width: 1200 mm Max. panel length: 2400 mm Movement system: collet Iodpfju Huv Sex Afuoth

Condition: used, mileage: 2,47,000 km, power: 1,015 kW (1,380.01 HP), first registration: 10/2004, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, Year of construction: 2004, Equipment: ABS, electric window regulation, power mirror, = Additional options and accessories = - Air horn - Hub Reduction - Immobilizer - PTO - Radio - Toolbox = Remarks = Scania P114-380, 2004, 247,000 km Euro 3, Manual transmission, Hub reduction, Korp & Son stainless steel superstructure, 7000 Liters, Vacuum pump, High-pressure pump = More information = Front axle: Steering Rear axle: Double wheels; Reduction: hub reduction GVW: 21.000 kg Make of bodywork: Korp & Son = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered. Iedoy Rzaajpfx Afujth

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 50 kg, power: 1.1 kW (1.50 HP), tank capacity: 10 l, Material Conveying Unit Simar FX 2504 Motor Power: 1.1 kW (brushed motor) Power Supply: 230 V / 50 Hz Container Capacity: approx. 5 litres Conveying Performance: approx. 150 – 200 kg/h (depending on material) Maximum Conveying Distance: approx. 15 – 20 meters Isdpfx Aey Hlv Refujth Pipe/Hose Diameter: 38 mm (DN 38) Housing Material: Polished stainless steel Colorant Doser Simar FDX-2 Drive Type: Stepper motor (high RPM repeatability) Power Supply: 230 V / 50 Hz Speed: Infinitely adjustable (depending on control unit, typically 0.1 – 200 rpm) Color container capacity: approx. 5 – 10 litres

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, power: 1 kW (1.36 HP), Simar FX 2004 Material Handling Device Motor power: approx. 0.9 – 1.1 kW (brush motor) Power supply: 230 V / 50 Hz Container volume: approx. 3 – 4 liters Conveying capacity: approx. 60 – 100 kg/h Hose connection diameter: 38 mm (standard) Filtration: Polyester filter with automatic cleaning Simar FDX-2 Dye Dosing Unit Drive type: Stepper motor (high rotational speed repeatability) Power supply: 230 V / 50 Hz Speed: Continuously adjustable (depending on the control unit, typically 0.1 – 200 rpm) Iodpfx Afsy Hldnjueth Dye container capacity: approx. 5 liters

Condition: good (used), Year of construction: 2016, functionality: fully functional, overall weight: 50 kg, power: 1.1 kW (1.50 HP), tank capacity: 3 l, Motor power: 1.1 kW (brushed motor) Power supply: 230 V / 50 Hz Itsdpfx Afey Hk I Sjueh Container volume: approx. 5 litres Delivery rate: approx. 150 – 200 kg/h (depending on material) Max. conveying distance: approx. 15 – 20 metres Pipe/hose diameter: 38 mm (DN 38) Casing material: Polished stainless steel

Condition: used, mileage: 5,22,000 km, power: 279 kW (379.33 HP), first registration: 09/2009, fuel type: diesel, tire size: 385/55 R 22.5, axle configuration: 10x4, wheelbase: 7,730 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: other, total length: 10,000 mm, total width: 2,550 mm, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, = Additional options and accessories = - Aluminum fuel tank Itjdpfoy Rtvtsx Afujh - Digital tachograph - Air suspension - PTO (Power Take-Off) - Radio/CD player - Sun visor = Further information = Technical information Number of cylinders: 6 Engine displacement: 11,705 cc Axle configuration Axle 1: Tire size: 385/55 R 22.5; Steered; Left tire tread: 35%; Right tire tread: 35%; Suspension: Leaf spring Axle 2: Tire size: 385/55 R 22.5; Steered; Left tire tread: 50%; Right tire tread: 50%; Suspension: Leaf spring Axle 3: Tire size: 295/80 R 22.5; Twin tires; Left inside tread: 40%; Left outside tread: 40%; Right inside tread: 40%; Right outside tread: 40%; Reduction: single reduction; Suspension: Air suspension Axle 4: Tire size: 295/80 R 22.5; Twin tires; Left inside tread: 30%; Left outside tread: 30%; Right inside tread: 30%; Right outside tread: 30%; Reduction: single reduction; Suspension: Air suspension Axle 5: Tire size: 435/50 R 22.5; Left tire tread: 25%; Right tire tread: 25%; Suspension: Air suspension Weights Unladen weight: 17,860 kg Payload: 32,140 kg Gross vehicle weight: 50,000 kg Condition Damages: none

Condition: used, Year of construction: 2017, grinding range 600 x 300 x 400 mm magnetic plate size 600 x 300 mm distance spindle center to table 5500 mm max. table load 250 kg grinding wheel speeds 1.900 U/min longitudinal feed 680 mm cross travel 245 mm control STÖCKEL - ST-2 Surface Grinding Machine | STÖCKEL - FX 6030 ST-2 The machine is in good condition. Iodpfx Aju Rt Tqsfueth A machine video will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FX6030 | FX-6030 | FX6030ST | FX 6030 ST

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Concept Software CADmatic 4 Professional Isdpjimr Icsfx Afujth Lifting scissor table (mm) 4300 x 2200 No. 2 Rear pushers (TWIN PUSHER) Mod. POWER CONCEPT With clamps / grippers RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 95 (automatic) Scoring Unit (max saw diameter / power) 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) 380 / Kw 13,5 (Max 18) Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 28 OPTION: - Software Cut Rite (optimizzazione/optimisation) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Labels Printer (Option) - Software LABELING PACK BR 3/4/5 (etichette/labels)

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 With clamps / grippers 7 Turning device (rotating unit) at 90° Isdpfxoh Imvhj Afuoth Max. cutting width (mm) 3800 Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 95 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 380 / Kw 13,5 Adjustable speed of the saw carriage (m/min) 1 - 130 Front supporting tables with Air blowing system (N.) 3 (2160mm x 650mm) Total power (Kw) 28 (ca.)

Condition: used, mileage: 3,41,000 km, power: 279 kW (379.33 HP), first registration: 04/2006, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, Year of construction: 2006, Volvo FM380, 2006, Euro 3 engine but registered as Euro 4! No AdBlue! 341,000 km!! Manual transmission, Old tachograph = More information = Front axle: Steering Rear axle: Double wheels = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered. Itodey Nikqjpfx Afuoh

Condition: used, mileage: 3,92,994 km, power: 279 kW (379.33 HP), first registration: 06/2005, tire size: 13r22.5, axle configuration: 8x4, wheelbase: 1,800 mm, color: white, gearing type: mechanical, number of gears: 12, suspension: steel, Year of construction: 2005, Equipment: electric window regulation, General information Applicable material: Concrete Drivetrain Drive: Wheel Iedpfxsy Nld He Afusth Make of engine: Volvo Axle configuration Tyre size: 13r22.5 Suspension: leaf suspension Axle 2: Steering Axle 3: Double wheels Axle 4: Double wheels Weights Empty weight: 14.320 kg Carrying capacity: 17.680 kg GVW: 32.000 kg Functional Make of bodywork: LIEBHERR