Used Pulse Oximeter for sale (612)

Condition: good (used), Pulsotronic magnetic separator (manual exists) Nkodpfxsd Dpvhs Ah Row Magnetic separator for E.g. material cleaner New price: €4850

Condition: ready for operation (used), functionality: fully functional, This is a heavy duty impulse heat sealing machine from Star Universal - the sealer is a double heat machine which means the top and bottom jaw are heated - the sealing wires are 9.5mm wide and the sealing jaws are closed using compressed air which ensures that even when sealing heavy gauge plastic bags you will get a good reliable seal every time. Active seal bar length is 400mm Complete unit on stainless steel trolley with adjustable bag support platform - operates from a 240 volt AC supply and requires compressed air Ready to ship worldwide We take care of export documentation and shipping if required Nsdsw D E Arspfx Ah Rekw contact us for more pictures and videos

Year of construction: 2005, condition: good (used), Dust extractor,welding fume extractor by HERDING. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Integrated control cabinet with microprocessor to control all components. Herding MULTICOATER - (for sticky dust) for automatic addition of filter additives to protect filter media. 4 Kw fan Njdpfx Ahspgnfde Rjkw Capacity - 800 m3/h Herding® DELTA or DELTA² filter elements Filtration area - 14.56 m2

Condition: good (used), Year of construction: 2007, functionality: fully functional, filter area: 64 m², suction capacity: 4,500 m³/h, negative pressure: 3,200 Pa, Dust extraction, welding fume extraction, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser , sandblasting, soda blasting, shot blasting and all kinds of dry dust. Brand : ESTA Nedpfsvkd Rpjx Ah Rekw Model : DUSTEX F-64 The filter is cleaned by compressed air pulses during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Parameters : Capacity - 4500 m3/h Vacuum - 3200 Pa Filtration area - 64 m2 Cartridge filter cartridges - 4 pieces. 4 Kw motor. Inlet diameter - 280mm Complete with HEPA filter of filtration class H13 The device from the year 2007

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian Nodpfxsywcl Ro Ah Rekw

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor Nkedpfsx E Dncex Ah Row - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Nodpfjyv Iqvox Ah Rskw Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: new, Empty weight: 240.000 kg Cargo space capacity: 3.000.000 l Productivity: 120 tph FULL AUTOMATIC TOWER ASPHALT PLANT 1.1 COLD AGGREGATE FFEDING CHASSIS(6*12m3) 6 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 3 2.9 Filler stock silo 25 M3 2 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 2 Set 3.5 Filler Screw Conveyor 2 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 50 Ton capacity boiling oil heating isolation bitumen tank(One for PMB)With Stirrer(Vertical) 3 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET Nedpsykadvsfx Ah Rskw 4.7 Double wall bitumen pipe installations 1 SET 4.8 50 Ton capacity boiling oil heating isolation bitumen tank 1 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.000.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET 6 Granulator Feeder(Fiber Feeding with fan drive) 1 SET 7. Col Asphalt Recycling System(5m3 Hopper Feeder,500x22000mm Belt Conveyor,800x4000mm Belt Conveyor with Weighing System) 1 SET 8. Cladding(3 mm Deck Sheet on 50x50 Box Profile Coating) for Aggregate Hopper and Mixer Floor 1 SET 9. Real Time Gas Emission Measuring and Monitoring System(Integrated with PLC and Plant Automation)(Obserable by internet Connection) 1 SET 10. Dust Monitor PCE-PQC 23US Incl. Calibration Certificate 1 SET

Condition: used, Year of construction: 2006, suction capacity: 10,300 m³/h, negative pressure: 4,400 Pa, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum unit suitable for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: ESTA Model: DUSTEX F-126 The filter is cleaned by compressed air pulses during operation, ensuring high device efficiency. The fan is installed on the clean air side, minimizing the risk of explosion. Nkodpfx Asx Hxycjh Rsw Specifications: Max. airflow: 10,300 m³/h Max. negative pressure: 4,400 Pa Filtration surface area: 126 m² Cartridge filter elements: 6 pcs Motor power: 7.5 kW Inlet diameter: 315 mm Unit dimensions: Height: 3.70 m Width: 2.00 m x 1.35 m Base: 1.45 m x 1.02 m Stock number: 1095

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 7,390 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,560 mm, fuel type: electric, mast type: triplex, construction height: 2,235 mm, fork length: 1,600 mm, empty load weight: 5,200 kg, total length: 2,280 mm, drive type: Elektro, construction width: 1,195 mm, Electric 4-wheel forklift Load centre: 500 mm ISO class: ISO Class 2 = 1,000 – 2,500 kg Mast type: Triplex Technical condition: normal Front tyres type: Superelastic Front tyres condition: 100% Rear tyres type: Superelastic Rear tyres condition: 100% Battery: 80V, 625Ah, battery year: 2020 Description: partially repainted Nkjdpowiazajfx Ah Rsw Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, roof cover, windscreen, pulse control, full free lift,

Condition: excellent (used), Year of construction: 2001, Laser marking system Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Nedpjq Abnnsfx Ah Rjkw Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Water connection Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Water consumption dependent on inlet temperature Outlet temperature < = 35°C Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Ambient conditions for operation Temperature +10°C to +40°C Humidity < 70% Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar Njdpfxeywwrfo Ah Rskw • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power: 200 W – 5000 W Peak power: Up to 6 kW Wavelength: 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Output beam diameter: 15 mm 1/e², 21 mm full beam Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: • Ambient temperature (max): 40 °C • Ambient temperature (min): 10 °C • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: Nsdpfx Aheywwq Us Rjkw • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Depending on shutter usage

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,826 h, laser power: 6,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, overall weight: 15,000 kg, total width: 6,659 mm, total height: 2,565 mm, product length (max.): 13,743 mm, number of axes: 3, This 3-axis Bystronic BySprint Fiber 4020 was manufactured in 2017. It features a cutting area of 4,064 mm by 2,032 mm and a maximum cutting thickness of 70 mm. The machine is equipped with a powerful 6,000 W fiber laser, capable of handling various materials. If you are looking to get high-quality fiber laser cutting capabilities, consider the Bystronic BySprint Fiber 4020 machine we have for sale. Contact us for further details. • Working area: • Cutting area: X 4,064 mm, Y 2,032 mm • Maximum cutting thickness (Z): 70 mm • Performance: • Max positioning speed (X/Y): 100 m/min • Max simultaneous speed: 140 m/min • Accuracy: • Positioning accuracy (VDI/DGQ 3441): ±0.1 mm • Repeatability (VDI/DGQ 3441): ±0.05 mm • Edge detection accuracy: ±0.5 mm Nkjdpfjywwd Isx Ah Rew • Capacity: • Maximum workpiece weight: 1,580 kg • Table system: • Table changeover time: 35 s • Laser specifications: • Type: Fiber • Pulse frequency: 1–2,500 Hz • Wavelength: Fiber standard • Maximum cutting thickness by material: • Steel: 20 mm • Stainless steel: 15 mm • Aluminum: 15 mm • Copper: 10 mm • Brass/Bronze: 10 mm • Power consumption: • Total system consumption (with filtration & chiller): 31.4 kW

Condition: used, functionality: fully functional, Year of construction: 2005, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, pipe diameter (max.): 250 mm, pipe length (max.): 6,000 mm, power: 60 kW (81.58 HP), input voltage: 400 V, Equipment: cooling unit, emergency stop, For sale: TRUMPF TUBEMATIC Tube Laser Cutting Machine – Fully Equipped. The machine was used in industrial production and is in full working condition. Professionally dismantled and preserved in complete configuration. Scope of supply: - Bed and mechanical components - Electrical cabinets with original TRUMPF electronics - Drives, control units, power modules - Cooling system (chiller) - Cable tracks, sensors, wiring, etc. Machine technical specifications: X-axis travel: 6500 mm Y-axis travel: 200 mm Z-axis travel: 150 mm Workpiece sizes: Stock length * For manual loading: 141–6500 mm * For automatic loading: 3000–6500 mm Max. finished part length: 2000 mm Min. tube remnant length: 141 mm Wall thickness: 0.8–6.4 mm Round tube dimensions: Ø20–Ø150 mm Square profile dimensions: 20x20–120x120 mm Rectangular profile dimensions: 20x20 – max. oval Ø150 mm Workpiece weight: Max. workpiece weight: 120 kg Max. workpiece weight for unloading station: 40 kg Max. bundle weight: 4000 kg Speeds: X-axis: 100 m/min Y-axis: 40 m/min Z-axis: 40 m/min A-axis: 720 º/s Positioning accuracy1: Position deviation: ±0.2 mm Average range deviation: ±0.06 mm According to VDI / DGQ 3441, the measured length is 1 m. Processing accuracy depends on material type, its preprocessing, dimensions, and position in the working area. Nsdpfx Ahsyfnbls Rjkw Control system: CNC TRUMPF – Siemens Sinumerik 840 D Total weight of the basic machine configuration: 15,460 kg Laser data: TRUMPF TLF CO₂ laser with high-frequency excitation – TLF 2000 Guaranteed max. laser power (programmable in 1% steps): 2000 W Pulse repetition rate: TEM00 Gas consumption: Laser gases *CO₂ – 1 l/h *N₂ – 6 l/h *He – 13 l/h Cutting gases *O₂ – depending on application *N₂ – depending on application Laser cooling: closed circuit Maximum power requirement for full system: 63 kW/h Pneumatic connection: 7–10 bar

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Nkedpjn Nw Ntefx Ah Rjw Noise suppressor

Condition: used, Year of construction: 2022, Used machine Nsdpfx Ahjx H Dahs Rjkw Year of manufacture: 2022 Equipment and technical specifications: - Galvanized sheet steel construction - Space-saving thanks to compact design - Delivered ready for operation - ATEX - pressure shock resistance FSA tested - Low energy consumption with high performance thanks to clean air side high-performance fan with special impeller - Energy-saving motor of efficiency class IE4 - 4 large-capacity collection containers with insert bags - High safety and long service life due to certified filter media with test certificate - Compressed air pulse cleaning ('Jet' cleaning) with time-controlled regulation for filter surface regeneration - PLC control system with display, for 4 slide valves EPN 24V DC, 4 machine start contacts and 1 start for external automatic switch-on (additional slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to water supply required) - Extinguishing agent ABC powder is not suitable for fires involving metals or cooking fats and oils - Non-return flap, type-tested - Manufactured according to DIN EN 16770 - Residual dust content in exhaust air below 0.1 mg/m³ - GS-HM-03 'H3' test passed - IE5 efficiency power pack - Start-up slide valve control: Z 16 - Motor power: 11 kW - Rated volume flow (Vnenn): 6,927 m³/h at 20 m/s - Max. volume flow (Vmax): 8,000 m³/h - Negative pressure at Vnenn: approx. 3,100 Pa - Negative pressure at Vmax: approx. 2,300 Pa - Collection volume: 495 liters - Sound pressure level: < 73 db(A) - Extraction nozzle diameter: 350 mm Dimensions: 3,930 x 1,030 x 2,560 mm Weight: approx. 1,080 kg Original price over €30,000 Availability: short-term Stock location: 63934 Röllbach

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 3030 mm Measurements depth 2687 mm Measurements height 2150 mm Machine weight 3500 kg Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 310 mm V-Axis Movement 150 mm U-Axis Movement 150 mm Workpiece Workpiece weight 1500 kg Additional Equipment Cooling/Temperature Control: Cooling system with temperature regulation Generator: Transistor pulse generator Output Current: 50 A Generator Size: 600 x 650 x 1765 mm Generator Size: 600 x 650 x 1765 mm Nodpfox D Rqfox Ah Rekw This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 110 h, load capacity: 1,600 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 480 kg, total length: 538 mm, drive type: Elektro, construction width: 726 mm, Low-lift pallet truck Load centre: 600 Mast type: None Technical condition: very good Front tyre type: Polyurethane Front tyre condition: 100% Rear tyre type: Polyurethane Rear tyre condition: 100% Battery voltage: 26V Nsdpoyv Smbefx Ah Rokw Battery capacity: 150Ah Battery year: 2020 Description: Factory-refurbished used unit by Toyota, including new inspection and new certification in accordance with FEM (formerly UVV). Pulse control, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 270 h, load capacity: 2,000 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 512 kg, total length: 538 mm, drive type: Elektro, construction width: 726 mm, Low lift pallet truck Load centre: 600 Mast type: None Technical condition: very good Front tyres type: polyurethane Front tyres condition: 100% Rear tyres type: polyurethane Rear tyres condition: 100% Nsdpfx Aoyv Sl Rsh Rskw Battery volts: 26V Battery capacity: 150Ah Battery year: 2018 Description: Factory-refurbished used unit from Toyota including new inspection and new approval according to FEM (formerly UVV). Pulse control, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 95 h, load capacity: 1,200 kg, lifting height: 4,500 mm, free lift: 1,580 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, fork length: 1,150 mm, empty load weight: 1,200 kg, total length: 770 mm, drive type: Elektro, construction width: 760 mm, High-lift stacker Load center: 600 mm Mast type: Triplex Technical condition: very good Front tyres type: Polyurethane Front tyres condition: 100% Rear tyres type: Polyurethane Rear tyres condition: 100% Battery voltage: 24V Nsdpfx Aoyv Sl Doh Rokw Battery capacity: 225Ah Battery year: 2026 Description: Factory-refurbished used machine by Toyota, including new inspection and new approval according to FEM (formerly UVV). Pulse control, full free lift, CE certificate.

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system. Nksdpfx Ahexnlfls Rjw

Condition: new, Empty weight: 240.000 kg Cargo space capacity: 3.000.000 l Productivity: 120 tph FULL AUTOMATIC TOWER ASPHALT PLANT 1.1 COLD AGGREGATE FFEDING CHASSIS(6*12m3) 6 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 3 2.9 Filler stock silo 25 M3 2 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 2 Set 3.5 Filler Screw Conveyor 2 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 50 Ton capacity boiling oil heating isolation bitumen tank(One for PMB)With Stirrer(Vertical) 3 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 50 Ton capacity boiling oil heating isolation bitumen tank 1 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.000.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET 6 Granulator Feeder(Fiber Feeding with fan drive) 1 SET 7. Col Asphalt Recycling System(5m3 Hopper Feeder,500x22000mm Belt Conveyor,800x4000mm Belt Conveyor with Weighing System) 1 SET 8. Cladding(3 mm Deck Sheet on 50x50 Box Profile Coating) for Aggregate Hopper and Mixer Floor 1 SET Nkjdpfoygqwxsx Ah Rsw 9. Real Time Gas Emission Measuring and Monitoring System(Integrated with PLC and Plant Automation)(Obserable by internet Connection) 1 SET 10. Dust Monitor PCE-PQC 23US Incl. Calibration Certificate 1 SET

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Nksdpfxeyuvcij Ah Rsw Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: used, Year of construction: 2023, For marking on almost all metals and plastics, including most metals made of steel, stainless steel, brass, Bronze, gold, silver and similar materials as well as wood, glass, ceramics, leather, fabric and organic materials. Software: Marking software - QuickMARK ™ easy-to-use professional laser English in standard version Highlight Characters - All keyboard text characters and symbols. Programmable characters height, width, spacing, linear Position, angle and circumferential position Highlight Font - Selectable highlight fonts; Windows TTF fonts and continuous line fonts, All content in the text can be adjusted flat or curved. Content of the automatic tagging - serial numbers, shift codes, content from barcode reader, real time and date. Simultaneously import and markup content from a text or Excel file. External Content Management - Importing and tagging content from a host on the network using the SQL protocol or via the connection of Rs232 / Ethernet. Logo and Special Characters - Import and markup logo from images (BMP, JPG, PNG) and vectors (DXF, PLT, AI). Barcodes - Fixed and variable essence marking in 2D dot matrix codes QR codes barcodes. Adjustable marking parameters - Marking power, speed and frequency with line space and shape - Wiggle. Design support tools - You can customize your logos and schemes using the built-in character and design menu create. Or you can rearrange and tag your existing uploaded drawings. Marker location preview and pre-marking red beam simulation. Marking area X-Y Preferred:: 110x110mm / 150x150mm / 170x170mm / 200x200mm / 300x300mm, Laser technology: 1064nm - MOPA fiber laser with fixed pulse Yb and maintenance-free Laser power: 20W - 30W - 50W Frequency range: 1 - 600 kHz programmable Marking speed: max. 650 characters / second Weight 4U Laser Control Cabinet: 15 kg Marking head with Z-column and table:: 10 kg Interface, communication: USB, Ext I / O configuration for automation systems, Standard hardware: Motorized and programmable fully automatic focusing system and its sensor Nksdpjlfilyefx Ah Row Connected load: 300W (220V / 50Hz) Dimensions W x D x H: 717x360x754mm colour: Grey