Used Paint for sale (3,402)

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Codpfxjv Ed Ukj Aa Njrb Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm Codpjhby Riefx Aa Njrb with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: good (used), Paint unit, paint pump GRACO MERKUR + Graco G40 gun. Cedpsulc S Rjfx Aa Norb

Year of construction: 2011, condition: used, Make: B&M, Year of manufacture: 2011, Part size: 1,200 x 800 x 400 mm, comprising: 4 painting robots, paint dryer, heat medium natural gas, max. temperature 100°C, exhaust air volume flow 1,500 m³/h, circular conveyor system by Hero, batch of load carriers, control and switch cabinets, preparation and supply racks, platform system, stairway access, accessories. +++ Attention: Machine is part of an online auction! +++ Codpfex Ry Rdjx Aa Njrb

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: A1407003, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: cabin, For Sale: Complete Venjakob Surface Finishing Line We offer a complete Venjakob automated surface finishing line designed for high-efficiency coating, sanding, and drying of flat workpieces. This line is ideal for industrial applications requiring consistent and high-quality surface treatment (e.g. furniture, doors, panels). The Venjakob line consists of: VEN TRANS BELT modules: 0100 / 0300 / 0500 / 0600 / 0800 / 1000 / 1200 / 1300 / 1350 VEN SAND BRUSH modules: 0200 / 0900 Codpoxm Twtofx Aa Njrb VEN SPRAY COMFORT modules: 0400 / 1100 VEN DRY AIR JET modules: 0700 / 1400 Technical data provided in the documentation.

Year of construction: 2013, condition: as good as new (ex-display), Technical Details : - Sand Blasting + Liquid electrostatic painting line - Manufacturer - IKL AUSTRIA - Size of metal parts - max. 400x 2000 mm - Two Robots Crodpfshtlw Rjx Aa Nob - Capacity - 400 bottles / day - Line consists . 1. Sand Blasting line 2. Electrostatic painnting line

Condition: excellent (used), Year of construction: 2001, Complete Parquet painting shop Manufacturer - SORBINI/ VIET Year - 2001 Codpfx Aaordgrvo Norb Capacity - 800 m2/shift Time of one cycle - 8 min. Lenght of the line - 42 m

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Codpfx Aswu Acksa Nerb Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3

Condition: ready for operation (used), working width 4 meters fan motor power 4 kW set includes cardboard filter and paint stop filter Italian made electrical panel emergency stop button (STOP) filtration capacity 15,000 m3/h year of production 2022 CE marking Codjy Nikkopfx Aa Nerb

Year of construction: 2026, condition: new, functionality: fully functional, The system is a fully integrated, automated industrial powder coating line engineered for high-throughput production, process stability, and superior surface finishing quality. It combines a multi-stage chemical pretreatment washer, a high-efficiency electrostatic powder coating booth, a controlled thermal curing oven, and an overhead rail conveyor system designed for continuous or indexed part transportation. The chemical pretreatment washer is designed as a multi-stage surface preparation unit, including degreasing, rinsing, phosphating, and passivation phases. It is constructed from high-grade stainless steel (AISI 304/316) to ensure long-term chemical resistance and structural durability. High-pressure centrifugal pumps along with optimized spray nozzle arrays guarantee full and uniform coverage of complex geometries. The system incorporates closed-loop chemical recirculation, advanced filtration units, and automatic monitoring of pH, conductivity, and bath temperature, ensuring consistent surface activation while minimizing chemical consumption and operational waste. The electrostatic powder coating booth is designed for maximum transfer efficiency and minimal material loss. It features a high-performance powder recovery system (cyclone or cartridge filtration type), achieving recovery rates above 95%, which significantly reduces operating costs. The booth is constructed with anti-static architecture to prevent powder build-up and to ensure stable electrostatic field distribution. It is fully compatible with both manual and automatic spray gun systems, enabling flexible integration depending on production requirements. The curing oven is a high-performance thermal system designed to provide uniform heat distribution across the entire chamber, with temperature deviation controlled within ±2°C. It operates with forced convection airflow using high-efficiency industrial fans, ensuring homogeneous curing conditions for all coated parts. The heating system can be configured with gas, diesel, or electric resistance elements, depending on the available energy infrastructure. High-density insulated panels minimize thermal losses, while PLC-based control allows precise management of curing profiles and process repeatability, ensuring optimal polymer cross-linking and defect-free surface finishes. Cjdpfx Aasy Htg Dj Nsrb The overhead conveyor system provides continuous or step-by-step transport of parts throughout all process stages. It is constructed with heavy-duty chains and high-temperature resistant components suitable for demanding industrial environments. The system includes variable speed control to optimize dwell times in each process zone, enhancing throughput efficiency and process synchronization. Its ergonomic design minimizes manual handling while maximizing production flow stability. From an engineering standpoint, the complete line is designed for maximum operational efficiency, reduced lifecycle cost, and high process reliability. Energy-optimized thermal systems, chemical recovery circuits, and high transfer efficiency coating technology significantly lower total operating expenses while maintaining consistent coating quality. The modular architecture allows for future expansion and customization, making the system suitable for scalable industrial applications.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, The Cefla iBotic lacquering machine is an advanced robotic finishing solution designed for high-precision coating applications in industrial production. Engineered for flexibility and efficiency, it uses intelligent automation to deliver consistent, high-quality lacquer finishes on a wide range of surfaces. Its programmable system allows for precise control of spray patterns, reducing material waste while ensuring uniform coverage. Ideal for manufacturers seeking to optimize productivity and finish quality, the iBotic combines cutting-edge robotics with reliable performance in modern finishing lines. Crsdpfxey E Huxs Aa Neb

Condition: new, CATALOG NUMBER MR001 - brand new machine, DTR documentation + CE TECHNICAL DATA - working width: 2000 mm - front width: 2500 mm - depth: 850 mm Crsdpfxjx Uz Rme Aa Nob - height: 1700/1950 mm - max. capacity: 7000 m3/h - fan power: 1.5 kW - speed: 2850 rpm - electrical parameters: 400V-50Hz - outlet duct diameter – square 540x540 mm - pre-filter: cardboard - "Paint-stop" filters - noise level approx. 78 dB - dimensions L/W/H 2500x850x2200 mm - weight approx. 250 kg Net price: 14,100 PLN Net price: 3,350 EUR at an exchange rate of 4.20 PLN/EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Cedpevvizkefx Aa Norb

Condition: excellent (used), Year of construction: 2022, For sale: Romer powder coating line. Equipment manufactured in 2022, lightly used. It was used for coating armored doors. The powder coating line consists of: 1. Oven (doors on both sides, 5 coating tracks) Model: Romer SW Internal dimensions: 3000 x 1500 x 2200 mm The oven does not have a heating burner, it was previously used with a gas burner. A gas or electric burner can be installed if required. 2. Romer powder coating booth extraction wall Model: Romer KPO-3ZN 3. Conveyor system Overall dimensions: length 5900 mm x width 14000 mm, 2 trolleys with 5 tracks each. 4. Crossbeams with wheels (20 pcs.) Csdpfx Aoyzw Hwoa Njrb Currently, the line is dismantled and ready for transport.

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 13030301, Equipment: type plate available, We are offering a combined spray painting and drying booth MAXI RANGE 15-NOVA VERTA, which enables both painting and drying operations. The booth is capable of independent operation along its full length or separately in each of its two halves, independently from each other. Codpfx Aey Iamtja Nerb

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Csdpfx Aaeu T Hrps Norb Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: used, The comfortable Varioflex rack trolley is designed for flexible and gentle storage of painted workpieces. Additionally, its 4 swivel castors allow for the transport of the workpieces. Its stable tubular frame construction can be adjusted from 200 to 2000 mm. With 17 inner and 17 outer support tubes per side, the trolley can handle weights of up to 400 kg with evenly distributed loads. The plug-in inner and outer support tubes can be optionally removed and re-inserted at the rear. When not in use, the rack trolley can be collapsed to save space. Optional accessories: - Plastic-coated support tubes - Additional rack Technical data: Length: 200 - 2000 mm Depth: 870 - 1180 mm Height: 1855 mm Support tube length: 650 mm - extendable up to: 1150 mm Clear spacing between tubes: 70 mm Load capacity: 400 kg Cedpfx Aaoy Dkg As Njrb Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 2015, Brand: Makor Type: Robospray Twin Year: 2015 Inner dimension L: 670 cm Inner dimension W: 330 cm Inner dimension H: 213 cm Exhaust system: Yes Electric connection: 400 V Dimension L: 11000 mm Dimension W: 4600 mm Dimension H: 4500 mm Includes Crjdpfx Asiu Hbnoa Nsb - 2x electric foil roll-off units; - 1x Beerepoot mobile roller conveyor

Condition: excellent (used), Servatechnik extraction Credpfxox Nbnnj Aa Njb

Condition: good (used), Year of construction: 2005, Collomix Rota 30 Paint Mixer The Collomix Rota 30 is a powerful biaxial mixer designed specifically for the fast and efficient mixing of paints, varnishes, and plasters in closed containers. It is distinguished by a biaxial mixing process in which the container rotates simultaneously around two axes, enabling mixing times of under 90 seconds—even with heavy materials. Features and Ergonomics Automatic Clamping: The mixing container is automatically secured and centered immediately after insertion. Safety Features: Integrated safety door interlock and an emergency stop button; the door opens only after the mixing unit has come to a complete standstill. Handling: Equipped with retractable casters and height-adjustable machine feet for easy positioning. Durability: An integrated "Splash Guard" mechanism protects the drive components from contamination caused by leaking paint. Areas of Application The unit is primarily used in the paint wholesale and retail sectors, as well as in the chemical industry. It frequently serves as a system component within paint tinting systems to mix color pigments into base paints without lumps. Collomix Rota 30 Paint Mixer For mixing: Paints Color granules Facade paints Industrial paints Plasters Other low-viscosity materials Crsdpfxoy Nxh Ej Aa Nsb Max. mixing weight: 35 kg Rec. continuous mixing weight: 30 kg Max. container height: 60–400 mm Year of manufacture: 2005 You can find other paint mixers in various sizes—both new and used—in our shop! International shipping costs available upon request!

Condition: used, 1 – Transport table with cleaning device (air blast device) – here, a brush runs across the entire width of the table and removes dust residues from the workpieces. 2 – Roller coating machine No. 1 3 – Roller coating machine No. 2 4 and 5 – UV lamp with conveyor – 1 lamp irradiates from above 6 – Brushing machine Quick Wood System RO1400 7 – Venjakob spray booth – equipped with two separate circuits with pumps as well as 8 spray guns. 8, 9, 10, 11, 12 – Drying tunnel with top air supply through nozzles, with the capability to control temperature and air supply in 3 zones. 13, 14 – UV lamp with conveyor – 2 lamps positioned at an angle to the workpiece, also cure the edges. 15 – 4-roller brushing machine with separate height and speed adjustment for each roller. 16 – Outfeed table for intermediate sanding Crjdpfxey Em Hho Aa Nob 17 – Cleaning device (air blast device) for removing light dust from the surface 18 – Venjakob spray booth – equipped with one circuit, but can be converted to a second circuit by exchanging the entire rack with pistols (a spare rack is included), and switching the pump (two pumps are included with the set). 19 – Roller conveyor, prepares items for the dryer, controlled by light barriers 20 – Dryer with 14 levels 21 – 3D UV lamps Superfici, gallium and mercury 22 (not shown in the diagram) – Outfeed table with two speed settings, adjustable to the unloading speed of the paint line.

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Credpfx Asw Idbyea Nsb Position 5: Ovens SCM-BRAVOROBOT P1

Condition: used, Spray enclosures, Paint fume, Used equipment Manufacturer: Kematechnik Type: IM-SZ-1,5-4000 Overall dimensions: Crsdpfx Aaow Tt Tvs Neb Width: 1500 mm Depth: 2550 mm Height: 2230 mm Year of manufacture: 2017 Airflow capacity: 4000 m³/h Motor power: 2.2 kW

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Completely overhauled, 12-month warranty, available immediately. Equipped with a safety system for solvent-based substances in accordance with DIN 1539, including exhaust fan, supply air cage filter, as well as concentration monitoring and a recirculation air filter wall in the interior. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm Crjdpfxsvcb U Ao Aa Nsb - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 300°C - Eurotherm controller 2404 (20 programs, each with 16 segments) - Eurotherm recorder - Connected load: 29 kW - 6 wire shelves included, plus V2A support brackets - Minimum exhaust air flow rate: 360 m³/h - Maximum permissible solvent quantity: 36g at nominal temperature of 300°C - With concentration monitoring - New window seals - Net weight approx. 1200 kg - Includes documentation, CE declaration - Electrically tested and with DGUV test protocol Inspection in our warehouse by appointment. We offer new and used industrial ovens. Get in touch with us! Oven, ovens, drying oven, furnace, heat oven, heating cabinet, industrial oven, paint dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, recirculation drying cabinet, recirculation oven, solvent oven, chamber recirculation oven

Condition: like new (used), Year of construction: 2022, Immediately available, 12-month warranty, excellent condition Recirculating oven for solvent-based materials according to DIN EN 1539, available with 4 loading trolleys - Max. temperature 150°C (can be increased upon request) - Usable volume: 1,875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Loading tracks, recesses for feeding the oven with a loading trolley - Maximum permitted quantity of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow at 20°C: 360 m³/h - KS Regler 40-1 controller for simple temperature regulation with pre-set ramp or hold times (1 program, 4 segments) - Controller features self-optimization and up to 3 process outputs - Additionally, a simple timer is integrated, operable via front buttons - Electrical connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating capacity: 36 kW - Net weight: 820 kg - Only available with 4 loading trolleys, each with 12 trays and 24 stainless steel shelf levels - Documentation, CE declaration - Electrically tested and supplied with the latest DGUV test protocol Inspection possible at our warehouse by appointment. Credpfoxbtvfox Aa Njb Oven, ovens, drying oven, kiln, heat oven, heat cabinet, industrial oven, solvent oven, tempering oven, preheating oven, temperature oven, drying cabinet, chamber oven, curing oven, recirculating drying cabinet, recirculating oven, paint dryer