Used Pure Steam Generator for sale (13,676)

Condition: used, Spirax Sarco Clean Steam Generator Station – 700 kg/h – Year of Manufacture 2019 For sale is a steam-heated clean steam generator station from the manufacturer Spirax Sarco with a clean steam capacity of approximately 700 kg/h. The system consists of a horizontal clean steam generator with an integrated tube bundle heat exchanger, a condensate cooler for feedwater preheating, and a fresh water feed via a control valve. Technical Data Manufacturer: Spirax Sarco GmbH System Type: Clean Steam Generator Station Serial Number: 2019/955 Year of Manufacture: 2019 (according to serial number, to be confirmed) Clean Steam Capacity: approx. 700 kg/h Clean Steam Pressure: 0.8 bar(g) Heating Steam Quantity: approx. 770 kg/h Heating Steam Pressure: approx. 3.5 bar(g) Total Power Output according to Design Data: 531 kW Feedwater Inlet: 15 °C Minimum Feedwater Pressure: 2 bar(g) Feedwater Quality: according to EN 285 Clean Steam Generator Design: horizontal, with pull-out U-tube bundle Design Pressure, Tube Side: 10 bar Design Pressure, Shell Side: 3 bar Design Temperature: 200 °C each Diameter: approx. 711 mm Hedpfx Ajwgkyheirjw Length: approx. 2,600 mm Height: approx. 1,400 mm Thermal Output: 452 kW Tube Bundle: Stainless steel 1.4571 Insulation: approx. 100 mm mineral wool with galvanized steel sheet cladding Condensate Cooler / Feedwater Preheating Type: Plate heat exchanger Type: Alfa Nova 27-10H Manufacturer: Alfa Laval Capacity: 61 kW Design Pressure: 25 bar Design Temperature: 225 °C Condensate Quantity: approx. 770 kg/h Feedwater Quantity: approx. 700 kg/h Equipment Control cabinet and control system Electropneumatic pressure control valve Safety and shut-off valves Condensate trap and drain group Pressure sensors and manometers Level control with low water alarm Piping and connecting fittings Base frame with support saddles The system was designed and manufactured in accordance with the European Pressure Equipment Directive applicable at the time of manufacture. Further technical documentation is available upon request. Inspection possible by appointment.

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 Hsdpfey D Hy Eex Airjw • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 1 used rapid steam generator Hjdpfjy Tvukjx Airow ----- Manufacturer: CERTUSS Type: Universal 500TC Capacity: 500 kg/h Maximum thermal output: 364 kW Operating pressure: 16 bar Test pressure: 57 bar Water content approx.: 42.9 liters CE marking: CE 0035 Year of manufacture: 2017 Equipped with Certuss gas burner, gas control system, control cabinet with touch control, mounted on the boiler body, feed water pump, feed water tank and the existing coarse and fine fittings.

Condition: excellent (used), pressure: 13 bar, operating pressure: 13 bar, For sale: a Jumag steam generator with a gas burner. An oil burner can be included upon request. The unit is in very good condition. Hsdpfxjydq E Do Airew Type DG 160. Steam output: 160 kg/h. Maximum steam pressure: 13 bar. Delivery available for an additional charge. On-site inspection possible. Please contact us if you have any questions.

Year of construction: 1996, condition: excellent (used), Used condensate tank Manufacturer: Gestra Year of manufacture: 1996 We also speak Russian! Please arrange a viewing by telephone in advance. We prefer to sell to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. Hjdjiz A Tzjpfx Airsw The seller assumes no liability for typographical or data transmission errors. Of course, we will also take care of all the necessary formalities. Loading is possible.

Condition: used, Year of construction: 1999, Steam generator by company ZAFA heating media: gas, capacity: 280 kg/h incl. condensate vessel, steam-drying, steam-hose and outdoor chimney Capacity: 280 kg/h Vapour pressure: 10 bar Volume: 38 Liter Length: 1,60 m Width: 0,75 m Height: 1,65 m Weight: 1000 kg Position: horizontal Hedjztzbtspfx Airew Features: switch box on producer Periphery: connection chimney, diameter 0.30 m

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: CERTUSS Type: Junior Capacity: 600 kg/h Maximum heat output: 436 kW Operating pressure: 16 bar Water content: 42.9 l Test pressure: 57 bar CE marking: CE 0035 Year of manufacture: 2004 Hedpfx Aoy Tvtasirjw Equipped with Certuss gas burner, gas control system, control cabinet, mounted on the boiler body, feedwater pump, feedwater tank, and the existing coarse and fine fittings.

Year of construction: 2008, condition: good (used), Industrial stainless stell humidifier , steam generator Outdoor unit 4x8 kw heating wire 32kW 160 ° C max Hodpefl Iquefx Airsw

Condition: good (used), Wanson steam generator from meat factory which closed in 2016. 698 Kw. Further details are on the plates shown in the photographs. Hedpfx Aiei Uli Eerow

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale is a Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Model: DG 360. Year of manufacture: 2009. Hsdpeydq Ewofx Airjw Steam output: 360 kg/h. Max steam pressure: 13 bar. Delivery available at extra cost. On-site inspection possible. Feel free to contact us with any questions.

Year of construction: 1998, condition: excellent (used), Used Steam Boiler Manufacturer: LOOS Type: UH-D Year of manufacture: 1998 Steam output: 1250 kg/h Weishaupt burners are available in several versions. Hsdpfxeiz Adwj Airsw We speak Russian! Please arrange a viewing by telephone. Preferential sale to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical and data transmission errors. We would be happy to buy your used boiler or burner! Of course, we will also handle all formalities. Loading possible.

Condition: excellent (used), Year of construction: 2011, pressure: 11.77 bar, operating pressure: 12 bar, For sale: Manara steam generator with gas burner. Hedpfx Aisydq Thersw Available with oil burner on request. Type: GS 200 Steam output: 2000 kg/h. Maximum steam pressure: 11.77 bar. Delivery available for an additional charge. If you have any questions, please feel free to contact us.

Year of construction: 2002, condition: excellent (used), Used Steam Boiler Manufacturer: LOOS Type: UF Year of Manufacture: 2002 Steam Output: 600 kg/h Operating Pressure: 6 bar Burner: Weishaupt WG40N/1-A Design: ZM-LN Output: 55-550 kW Year: 2002 Connection Pressure: 15-500 mbar We speak Russian! Please arrange viewings by phone only! Hsdjizxbuopfx Airjw Preferably sold to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical and data transmission errors. We will gladly purchase your used boiler or burner! Of course, we will also take care of all formalities. Loading possible.

Condition: good (used), Steam generator, evaporator -Vaporizer: Manufacturer KED, Kurt Ehemann/Type electric vaporizer -Number: 5x evaporators available Hedpfxewz Edqo Airjw -Price: per piece -Total dimensions: Ø 330 x 575 mm -Weight: 35 kg/piece

Condition: excellent (used), Year of construction: 2011, pressure: 13 bar, operating pressure: 13 bar, For sale: Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Model DG 360. Year of manufacture: 2011. Steam output: 360 kg/h. Maximum steam pressure: 13 bar. Delivery available at extra cost. Inspection on site possible. Please contact us if you have any questions. Hedpfx Aeydqxdoirew

Year of construction: 2018, operating hours: 350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SPZ6M, COMPLETE EPS PRODUCTION LINE – FANGYUAN / ICI SIXEN – 2018 Complete EPS production installation suitable for moulded EPS products, including pre-expansion, shape moulding, insert/in-mould capability, storage silos, cooling-water system and steam-generation equipment. The line was purchased new in 2018 and has had relatively limited use. It is currently installed and can be inspected before dismantling. MAIN EQUIPMENT INCLUDED FANGYUAN SPJ90A BATCH PRE-EXPANDER Automatic batch EPS pre-expander with density control, dryer and conveying system. • Expansion chamber: Ø900 mm • Density range: approx. 12–90 g/l • Capacity: up to approx. 720 kg/h depending on density • Steam pressure: 0.6–0.8 MPa • Connected load: 16.75 kW • Typical cycle: approx. 60–70 sec • Suitable for white and grey EPS • Approx. 16,000 kg total EPS processed • Approx. 800 production cycles FANGYUAN SPZ6M AUTOMATIC SHAPE MOULDING MACHINE Special configuration for moulded products with inserts / in-mould applications. • 6 positions per cycle • Twin steam chamber • Moving twin mould system • In-mould capability • Maximum moulding area: 720 × 1270 mm • Max. individual position: 330 × 250 mm for 6 positions • Max. depth: 180 mm • Cycle time: approx. 100–150 sec • Connected load: 13.5 kW • Machine weight: approx. 6,000 kg • Overall dimensions: approx. 5000 × 5100 × 3700 mm • Schneider touchscreen / Mitsubishi PLC • Approx. 350 total operating hours FANGYUAN SPZ80K AUTOMATIC EPS SHAPE MOULDING MACHINE WITH VACUUM Originally supplied as SPZ900K. • Moulding area: 840 × 720 mm • Up to 4 individual mould positions • Steam pressure: 6–8 bar • Steam consumption: approx. 6 kg/cycle • Compressed air: 1.2 m³/cycle • Cooling water: 40–120 L/cycle • Connected load: 10.6 kW • Approx. dimensions: 4500 × 1640 × 2700 mm • Approx. weight: 4,000 kg • Approx. 53,300 recorded machine cycles EPS STORAGE SYSTEM • 6 × approx. 25 m³ silos • Approx. 150 m³ total storage capacity COOLING-WATER SYSTEM • Cooling tower approx. 100 m³/h • 1 low-pressure + 2 high-pressure pumps • Fangyuan DN150 stainless-steel water filter STEAM-GENERATION SYSTEM A complete European steam-generation system is potentially available with the installation, including ICI SIXEN 500 kg/h steam generator, Riello natural-gas burner and related auxiliaries. The exact steam-system scope included in the final sale can be agreed with the buyer, as some components may be retained depending on the final configuration. OTHER INFORMATION • Year: 2018 • CE equipment • Manuals and technical documentation available • Photos and videos available • Inspection possible before dismantling • Preference for sale as a complete line • Dismantling, loading, transport and reinstallation can be discussed separately Hodpfxjz A Dxko Airew • Moulds are not included unless specifically agreed A detailed PDF with the complete technical description and equipment specification has been uploaded in the Documents section of this listing. Estimated equivalent replacement cost today: approximately EUR 330,000–380,000 Preference will be given to the sale of the complete production line, but individual machines and components can also be offered separately upon request.

Condition: used, pure engineering Type: pureGMC18 System for manual weighing processes Climate chamber for highly sensitive weighing processes with ultra-microbalances. The weighing chamber is specifically designed for the gravimetric determination of particulate emissions in exhaust gas analysis and meets the regulatory requirements of environmental authorities. All necessary climate control components are integrated. In combination with the particulate filter, a contamination-free and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-isolated granite for low-vibration mounting of an ultra-microbalance Ionization device against static charging Flow protection for shielding the weighing cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with power outlets, grounding bolt Advantages: Meets regulatory requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Hedezd Ukispfx Airow Designation: pureGMC18 Temperature: 22°C ± 1 K Humidity: 45% RH ± 3% Dimensions W/D/H: 1,800/800/1,980 mm Cleanroom class 5 (ISO14644-1) Voltage supply: 400V, 15A 50/60 Hz Weight: 650 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, HOWDEN KK&K TWIN CA46 steam turbine with generator – 1.6 MW – NEW NEW | Never installed | Inspected by HOWDEN in July 2026 | OEM warranty reconfirmed | Immediate availability Available for sale: an industrial HOWDEN KK&K TWIN CA46 steam turbine, complete with a synchronous electrical generator, with a maximum electrical power of 1,595 kW (approximately 1.6 MW). The machine is NEW, never installed or commissioned, stored in a closed environment, and complete according to the original HOWDEN supply. Originally intended for an industrial project that was subsequently modified, it is now available for immediate delivery, without waiting for the production time of a new unit. HOWDEN INSPECTION AND WARRANTY On July 27–28, 2026, the turbine underwent a new inspection by the manufacturer, HOWDEN, who subsequently reconfirmed the official warranty until November 22, 2027. Original technical documentation and inspection photographs are available upon request. ECONOMIC TERMS – 40% DISCOUNT Reference value of the supply: €1,500,000 CURRENT PRICE: €900,000 The 40% reduction is motivated by the company’s need to free up the space occupied by the machine, following the modification of the original industrial plans. COMPOSITION OF THE SUPPLY HOWDEN KK&K TWIN CA46 steam turbine on a skid Integrated 3-shaft gearbox Synchronous electrical generator, supplied separately Lubrication and oil control system Control, control, and protection panels Original HOWDEN regulation and safety systems MAIN TECHNICAL DATA Turbine: Double-body HP + LP configuration Controlled steam extraction between HP and LP HP inlet pressure: 16 bar(a) HP inlet temperature: 400 °C HP steam flow rate: 10,000 kg/h LP inlet pressure: 2.4 bar(a) LP outlet pressure: 0.3 bar(a) Maximum mechanical power: 1,658 kW Maximum electrical power: 1,595 kW Gearbox outlet speed: 1,500 rpm Generator: Three-phase, brushless synchronous Rated power: 1,994 kVA Voltage: 6 kV Frequency: 50 Hz Air-cooled, IC31 Parallel operation with the grid Included systems: Oil system with main and auxiliary pumps Electronic regulator SC901 Siemens SIPROTEC 5 protection panel Independent overspeed protection Steam pressure and extraction control PROFINET interface ENC-RfG simulation model MAIN APPLICATIONS Biomass and waste-to-energy plants Industrial cogeneration (CHP) Revamping and repowering of existing plants STATUS AND CONDITIONS OF SALE Year of manufacture: 2024 Condition: NEW, never installed or started Last HOWDEN inspection: July 2026 OEM warranty reconfirmed until 11/22/2027 Hsdpfx Ao Afhgwjirsw Immediate availability Location: Piedmont, Northern Italy Conditions: EXW – ex works Visit and inspection of the machine by appointment PRICE: €900,000 (–40% compared to the reference value of €1,500,000) Original HOWDEN technical documentation and documentation of the latest inspection are available for interested buyers.

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 Hedpfx Aiex U Tgmsrew The unit appears to be in new condition. It was only in operation for a short period. Our price is €17,000.

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Hedpfx Aijw U N Daorjw

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, UNOX XECC-0513-EPR CHEFTOP MIND.Maps COMPACT PLUS | Electric convection-steam oven, 5x GN 1/1 Manufacturer: UNOX S.p.A. Model / Type: CHEFTOP MIND.Maps™ COMPACT PLUS XECC-0513-EPR Serial number: 2019E0037931 Year of manufacture: 2019 Power supply: 380–415 V 3N~ / 220–240 V 3~ / 50/60 Hz Power: 9.3 kW Overall / internal dimensions: 535 x 872 x 649 mm Chamber capacity: 5 trays / GN 1/1 racks (rack spacing: 67 mm) Net weight: 65 kg, gross weight: 80 kg Other parameters: Protection rating: IPX4 Water pressure: 150–600 kPa (1.5–6 bar) Certificates: CE, EAC, NSF Hodpfxsz Tdkpe Airjw The professional UNOX CHEFTOP MIND.Maps™ COMPACT PLUS electric convection-steam oven (model XECC-0513-EPR) is a technologically advanced piece of catering equipment, designed for kitchens, restaurants, catering services, and delicatessens, where maximizing space efficiency without compromising performance is crucial. The COMPACT series stands out with its width of only 535 mm while maintaining full compatibility with GN 1/1 gastronorm containers. The device is controlled via an intuitive touchscreen panel with MIND.Maps™ technology, which allows for precise design and storage of custom thermal processing cycles. The oven is equipped with advanced chamber climate control systems: STEAM.Maxi™ (steam generation and precise humidification), DRY.Maxi™ (forced and rapid moisture removal for crispness), and AIR.Maxi™ (multi-point air circulation with auto-reverse, ensuring perfectly even baking on all 5 levels). The PLUS version designation guarantees the highest level of intelligent performance, supported by algorithms for automatic adjustment of baking parameters (ADAPTIVE.Cooking™). It is an ideal choice for continuous operation in roasting, frying, steaming, regeneration, and baking of meat and bakery products.

Condition: used, cooking length ± 13.000 mm belt width 600 mm all stainless steel with electrical hoist steam heated (steam generator not included): 780 kg/h (6bar) temperature distribution in 2 zones dimensions (l x w x h) : ± 14.400 x 2.000 x 2.700 mm Hedpfoz Imw Hjx Airjw adjustable speed

Condition: new, Year of construction: 2023, The Newpower Generator proudly presents their new NWC165 emergency generator set with soundproofing. The unit is new, complete including control, diesel tank, exhaust batteries, electronic speed controller, AVR, battery charger, cooling water heater, turbocharger, sockets, FI protection circuit breaker. Description Model: NWC165 Cummins Engine Newpower Generator Continuous power: 120kW / 150 kVA Maximum power: 132kW / 165 kVA Engine : Cummins 6BTAA5.9-G2, 6 cylinder water-cooled, turbocharged Connection: circuit breaker RCD, 5-wire connection Sockets: 1* 400V 5Px125A, 2* 400V 5PX63A, 2* 220V 2PX16A Frequency : 50 Hz Voltage: 400/230 V including electronic speed control, AVR, battery charger, galvanized soundproofing, cooling water heater Control unit: Comap AMF8, mains feed Dimensions: 3050*1120*1670mm Weight: 2043kg Diesel tank: 275 L At 100% load: 30 L/h At 75% load : 23 L/h At 50% load : 16 L/h Grid monitoring, grid feed-in Hedpfxjnkb Uys Airjw Soundproofed, ready to use. additional costs 250A automatic switch : 1080 € 400A automatic switch: 1620 € Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Year of construction: 1997, condition: used, Technical details: Rated capacity: 1100 kVA Hjdpfeu Nvbuex Airew Revolution per minute: 1500 U/min type of fuel: Wasserstoff / Steam / Vapor max. temperature: 420 Grad weight: 3,9 t STEAM TURBINE other data: - Power: normal 560 kW and max. 820 kW - P1 64 bar - P2 11,5 bar - 1N = 1500 Ampere - Generator type DSG74-M1-4W; 400 V; - Generator nominal power: 1053 kVA / nominal effective power 820 kW - Turbine is suitable for operation with exhaust steam temperature of approx. 405 °C. - A throughput of 2.8t live steam / h in continuous operation is only possible in load-free condition. Sale of the turbine as described and as is! The performance data given are manufacturer's data. These may vary due to age-related wear! We do not have and do not sell spare parts. For spare parts please contact the manufacturer: Dresser-Rand Siemens !!! i.D. *

Condition: new, Year of construction: 2023, The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Technical specifications Engine : Doosan & P158LE, 8 cylinder, water-cooled, turbocharged Continuous power: 388 kW / 425 kVA Maximum power: 340 kW / 485 kVA Control system: Deep Sea DSE 7320 Connection: 5-wire direct connection (optional sockets, optional automatic transfer switch, optional circuit breakers..) Hedpfjnkapksx Airew Frequency : 50 Hz & 3-phase Voltage: 400/230V RPM : 1500 rpm. Dimensions (LxWxH): 4434x 1606x2424mm Weight: 4190 kg Network monitoring, soundproof Shipment: - Worldwide transport is available at an additional cost - In order to be able to quote an exact freight price, please send us a request with your data and your complete address