Used Ras for sale (68)

Condition: like new (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 107/50, The machine is in fully operational condition. Multibend 2000 RAS 74.30 folding machine by RAS Reinhardt Maschinenbau GmbH — a universal folding machine with a swing beam, CNC control, a wide selection of segmented tools, and a working length of 3200 mm, designed for bending steel sheet (400 MPa). A manual or intelligent crowning system is integrated directly into the folding beam to ensure precise and uniform bends along the entire length. Elastic deformations of the folding beam depend on the sheet thickness, strength, properties, processed length, and positioning on the support beam. Sensors integrated into the folding beam detect its actual deflection during the first 10 degrees of bending, and the system sends commands to the actuators, which adjust the convexity of the beam, thus compensating for beam deflection. The control system stores all parameters for each new bend and uses them for subsequent operations. The bend line is always perfectly straight with the set radius, regardless of the metal thickness, length, ductility, strength, or the height and positioning of segments in the bending zone on the beam. Technical specifications: Working length: 3200 mm Redoyfm Udspfx Aamjn Max. sheet thickness: 4 mm Minimum bending radius: 1.25 mm × sheet thickness Minimum flange height: approx. 6 mm × sheet thickness Max. opening width of upper beam: 400 mm Adjustment range of folding and lower beam: 80 mm Bending angle: 0–180 degrees Max. bending speed: 70 degrees/sec Max. upper beam speed: UP 44 mm/sec DOWN 90 mm/sec Electrical connection: 7.5 kW Backgauge depth: 10–1550 mm Backgauge adjustment speed: 200 mm/sec Pneumatics: 6 bar CNC control: MULTIBEND 2000 Machine dimensions (L × W × H): 4.5 × 2.1 × 2.65 m Machine weight: 5590 kg Total weight of basic configuration: 5890 kg Year of manufacture: 1997

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, overall weight: 15,000 kg, input voltage: 400 V, bending angle (max.): 180 °, working length: 3,200 mm, working range: 3,200 mm, Equipment: documentation/manual, safety light barrier, Technical features: Year 2013 Working length 3200 mm Maximum sheet thickness (iron 400 N/mm2) 3.00 mm Maximum sheet thickness (stainless steel) 2.00 mm Redswq Rumopfx Aamen Maximum sheet thickness (aluminum) 4.00 mm Maximum bending height on four sides 250 mm Upper jaw stroke 650 mm

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Redpfx Aaov A Tfgomen Maximum sheet thickness (stainless steel) 1.5 mm Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Maximum height of bend on four sides max * 203 mm Bending blade action radius 180 degrees Machine width approx. 5500 mm Machine length approx. 7000 mm Machine height 2500 mm Total weight 20000 kg Power 25 kW Frequency 50 Hz Pressure 6 bar Loading system Blank Feeder with portal

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Specifications : Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum thickness of sheet metal (stainless steel) 1.5 mm Maximum sheet metal thickness (aluminum) 3.0 mm Maximum development sheet width 1500 mm Maximum four-sided fold height max * 203 mm Bending blade reach 180 degrees Machine width 5500 mm approx. Rsdpfxoqzibtj Aamon Machine length 7000 mm approx. Machine height 2500 mm Total weight 21000 kg Power 18 kW Frequency 50 Hz Pressure 6 bar INCLUDED drag loading system

Condition: used, functionality: fully functional, Used 4-meter folding machine from RAS Rodpoyfmy Hefx Aamen Model: 74.40 Capacity: 4000 x 3 mm Multibend 2000 CNC control Year of manufacture: 1992 The machine is in good working condition.

Condition: used, Technical details: sheet width: 2004 mm plate thickness: 2,5 mm distance between columns: 2040 mm Total power requirement: 3 kW bending angle max.: 180 ° Weight approx.: 1700 kg dimension machine xH: 2,7 x 1,3 x 2,0 m Rsdpfx Aeya Eq Hjamsn

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm Rodpfegxgm Hox Aamen -Weight: 65kg

Condition: good (used), Year of construction: 1962, guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg Rjdpfx Aasdzd Hujmon

Condition: used, Stop for press brake, bending machine, guillotine shears ..., clamping angle, clamping aid,.Support rail for press brake, bending machine, guillotine shears, stop rail, clamping rail Rjdpst Rl Ulofx Aamjn -Manufacturer: RAS, support rails from guillotine shears type RAS 53.60 -Dimensions: 805/100/H80 mm / groove width 16 mm 3 pieces -Dimensions: 720/75/H85 mm with stop rail 1 piece -Delivery/Price: complete -Transport dimensions: 805/350/H80 mm -Weight 34.8 kg

Condition: used, Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm Rsdpfx Asdy Rhdjamjn -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg

Condition: used, sheet width 3100 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 36 Hub/min cutting angle 0.9 Grad table height 800 mm table width 430 mm distance between columns 3200 mm back stop - adjustable 5.0 - 750 mm Control konv. engine output 3.0 kW weight of the machine ca. 1950 kg range L-W-H 3730 x 2070 x 1400 mm Original price approx. 45.000 euros (!!) Special price on request Features: - Robust / motorized swing-cut guillotine shears - Machine with manual material/backgauge * Travel range 5.0 – 750 mm stop depth * Analog position display * Manual adjustment from the front - Break-proof, torsion-free steel welded construction - Compact and clear machine design - 1x hold-down beam * Hold-down opens before the knife beam moves up * No kinking of very sensitive sheets - Manual cutting gap adjustment - Integrated sheet metal holding system for thin sheet metal cuts - Sheet metal/cut material removal at the front (operator side) - 1x side stop with mm scale - 3x table extensions Rsdsxcyw Eepfx Aamon - 1x freely movable foot switch - Operating instructions (PDF

Condition: used, sheet width 2540 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 63 Hub/min Rjdpfsxacftsx Aamjn cutting angle 1.13 Grad table height 750 mm table width 320 mm distance between columns 2620 mm back stop - adjustable 5.0 - 550 mm Control konv. engine output 3.0 kW weight of the machine ca. 1600 kg range L-W-H 3100 x 1980 x 1400 mm Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analogue display * adjustable from the front * stepless adjustment over the entire travel range - recessed grips in the support table - 1x hold-down bar - 1x side stop - 3x support arms - 1x freely movable foot switch - operating instructions (PDF) Special accessories included: - sheet metal holding device for thin sheet metal cuts

Condition: used, sheet width 2040 mm plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm no. of strokes 50 Hub/min cutting angle 1.4 Grad Redpfx Ajxaaqasamsn table height 750 mm distance between columns 2120 mm back stop - adjustable 1.0 - 550 mm column arm 100 mm Control manuell engine output 5.5 kW weight of the machine ca. 2050 kg. range L-W-H 2600 x 1980 x 1400 mm Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display * adjustable from the front * Continuous adjustment over the entire travel range * Adjustment range 1.0 - 550 mm - Machine side stand with projection .. 100 mm - manual cutting gap adjustment - 1x hold-down bar - 1x long side stop - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - 2x EMERGENCY stop buttons at the front - Connection cable including plug - original instruction manual * Machine link: ?machineno=1008-9325338

Condition: used, Year of construction: 1963, sheet width 1040 mm plate thickness 2.50 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 90 Hub/min cutting angle 2.70 Grad distance between columns 1060 mm work height max. 940 mm back stop - adjustable max. 550 mm column arm 120 mm voltage 400 V engine output 4.0 kW weight of the machine ca. 820 kg. range L-W-H 1650 x 1200 x 1250 mm Equipment: - robust / motorized crank guillotine shears with motor drive - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analog position display * adjustable from behind * continuous adjustment over the entire travel range * travel range max. 550 mm - 1x hold-down bar - 1x side stop - 1x front support arm - original operating instructions Rjdpfxsxach Io Aamon

Condition: used, Year of construction: 2001, sheet width 3200 mm plate thickness 3.0 mm ST thickness at "Niro-steel" 2.0 mm Opening width / upper beam 300 mm speed OW 40.0 mm/sec Bending beam adjustment 80.0 mm work height max. 900 mm speed BW 90.0 Grad/sec control MULTIBEND 5000 back stop - adjustable 10 - 1550 mm accuracy +/- 0.1 mm air pressure 5.0 bar Number of working hours ca. 1.000 h total power requirement 2x 4.0 kW voltage 400 V weight 4400 kg range L-W-H 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours (!!) Rjdpoxabz Tofx Aamon good condition (!!) Special price on request - in checked condition - machine video - ?v=VP6emx4HTYM ! Maximum flexibility when bending cassettes, boxes and profiles ! High flexibility in bending part design ! High productivity and throughput ! Easy to use Equipment: - motorized universal swivel bending machine "RAS 73.30" * high-precision mechanics with modern control technology * for individual and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - RAS CNC control model "MULTIBEND 5000" * material and tool library * swiveling - front right * 1x emergency stop button - CNC electro-motorized upper beam adjustment * fast closing and opening speed * programmable opening and closing height * bending radii without special tools (multiple bends) * rigid upper beam for straight bending parts * 1x set of RAS split upper tools .. height 80 mm * RAS "click-in" tool system - CNC electro-motorized bending beam adjustment * fast swivel movement: short production time * crowning system compensates for deformation by the bending forces * 1x set of RAS split bending tools - CNC electro-motoric back stop * fast positioning, repeatable work * table plates hold the weight of the sheet * stainless steel table plates with ball rollers - 2x freely movable double foot switch - 1x RAS tool trolley for bending tools (movable) - operating instructions (PDF) + original circuit diagram

Condition: good (used), functionality: fully functional, Year of construction: 1990, This high-performance RAS 67.30 folding machine with single-program control is from first ownership. Bending capacity: 3200 x 2.5 mm Drive power: 3 kW Machine weight: 3,800 kg Including pre-selection of bending angle via rotary potentiometer, second foot switch for two-person operation, continuous 45° upper folding beam, segmented/split and raised upper folding beam Redpfx Aaexmi Hdemen Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2000, Empty weight: 22.000 kg Price: On request Working width: 1500mm Working length: 2160mm Max. thickness: 2mm With Supply-station infeed. Redpfsww Eqcjx Aamsn - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12/50 - Drive system: CNC - Power [kW]: 18.0 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 1500 - Options: Loading system - Transport weight [kg]: 22000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, GIGAbend RAS 76.30 - New images available: Listing images 1 to 3 are current pictures Listing images 4 to 5 are reference images of the machine’s configuration regarding table type - General technical data in mm: Bending length: 3200 mm Max. sheet thickness (400 N/mm²): 6.0 mm Max. upper beam stroke: 500 mm Upper beam clamping force: 120 tons Backgauge system (U-gauge): 10–4050 mm Machine dimensions (U-backgauge): 4620 x 5480 mm Base machine weight: 11 tons Backgauge + U-shape weight: approx. 1205 kg - Redox Hf E Espfx Aamsn Machine-related data: Motor operation: 400V, 50/60 Hz, 3-phase Year of manufacture: 2007 Condition: Refurbished – very good used condition Complete tool set 2-person operation from the front Second footswitch for operation from the rear (including light barrier for rear operation) 15" CNC color graphic touchscreen controller (Touch&More) CNC backgauge and hold-up system (10–1550) Backgauge system (U-gauge): 10–4050 mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, overall weight: 14,000 kg, working height: 1,000 mm, sheet thickness aluminum (max.): 3 mm, working length: 2,160 mm, TECHNICAL DETAILS Maximum bending length: 2,160 mm Maximum sheet thickness (steel, 400 N/mm²): 2.0 mm Maximum sheet thickness (stainless steel): 1.5 mm Maximum sheet thickness (aluminum): 3.0 mm Minimum bent part length (without corner pieces): 260 mm Minimum bent part length (with 30 mm corner pieces): 450 mm Minimum bent part length (with 50 mm corner pieces): 500 mm Maximum external bent part width: 1,500 mm Minimum internal bent part width: 150 mm Maximum bent part height (four-sided): 203 mm Lateral clearance at the corner pieces: 30/50 mm Clearance in front of upper beam tool: up to 60 mm Bending beam swivel range: 180 degrees Working height: 1,000 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,350 x 7,300 x 2,450 mm Approx. weight: 14,000 kg Maximum drive power: 25 kW Note: The vacuum stacking unit, neck and thread cutting device, and welding fixture visible in the images are not included in the scope of delivery or sale. Rjdpfjx Ngpkjx Aamsn

Condition: good (used), Year of construction: 1991, Sheet width 2500 mm Sheet thickness 4 mm Rjdpfxstq S T No Aamsn Cutting angle 1.49 ° Strokes per minute 40-80 Stand projection 200 mm Number of hold-down devices 13 pieces Backgauge - adjustable 5-1000 mm Table height 750 mm Oil capacity 85 l Air pressure - required 5 bar Machine weight approx. 3600 kg

Condition: good (used), Here we offer a folding machine with rotary foot punch. Rodpfx Aox Rp T Ijamen Suitable for 4 mm sheet thickness over a length of 3000 mm.

Condition: good (used), Year of construction: 1990, Beading machine RAS 12.31 Rsdjvk D Tdjpfx Aamen Sheet thickness max. 1.75 mm.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 52/10, working width: 3,200 mm, sheet thickness (max.): 3 mm, empty load weight: 4,400 kg, TECHNICAL DETAILS Sheet width: 3,200 mm Sheet thickness: 3 mm Opening width of the upper beam: 300 mm MACHINE DETAILS Motor power: 4.5 kW Rodpfxsxyv Ius Aamsn Dimensions & Weight Space requirements: approx. 4,300 x 2,300 x 1,750 mm Machine weight: approx. 4,400 kg EQUIPMENT Segmented pointed rail Segmented gooseneck tool

Condition: used, Year of construction: 2002, Bending machine RAS 73.30 Flexibend – Good condition, with segmental tools For sale is a good condition bending machine RAS 73.30 Flexibend, manufactured in 2002. Equipped with segmental tools, which are attached to the upper bending beam with a quick coupling. The machine is connected, it can be tested on site. Specification: Manufacturer: RAS Rsdpfjwmk Ewjx Aamsn Model: 73.30 Flexibend Year of manufacture: 2002 Working length: 3200 mm Max. bending thickness: 3.0 mm Upper beam opening height: 300 mm Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: ~4.4 t Equipment and functions: Control system: FlexiBend 6000 with touch screen – Recently updated by the manufacturer, with a new monitor CNC controlled backgauge: 10–1500 mm Automatic bending beam adjustment Adjustable bending speed Crowning compensation system (Crowning system) Two control pedals Tool storage trolley Tools: Segmented upper tools, height – 150 mm Segmented bending beam tools: – 20 mm (for sheets up to 2.5 mm thick) – 12 mm (for sheets up to 1.5 mm thickness) If you have any additional questions – please contact us, we will be happy to answer.

Condition: used, Year of construction: 2001, Electric guillotine R.A.S with mechanical rear support, fully operational, available for testing. Rsdpfx Aasttv Ecemen Specification: Model: R.A.S 52.30 Year: 2001 Manufactured in: Germany Working length: 3 100 mm Shearing thickness max: 2.0 mm Rear support: mechanical 770 mm Weight: 1950 kg Other: forward sheet metal drop. If you have any further questions, we will be happy to answer them.