Used Refrigeration Compressors for sale (8,100)

Condition: good (used), Year of construction: 2010, This is your *KAESER SK 25 compressor + 500L tank + TBH 23 dryer*. - *KAESER SK 25 - SIGMA screw compressor* - *Part No. 101958.0 / Serial 1562* - *Hour meter:* - Photo 1: *20,704 total hours* - This is low for a KAESER; they typically run for 60,000 hours. - Photo 2: *5,224 hours under load* (1) - This represents the core operating time of the machine. - Photo 3: *314 hours* - Hours under pressure (2). - *Displayed pressure 0.0 bar = normal shutdown, no fault.* - *Complete set:* - SK25 compressor (15 kW - approximately 2 m³/min at 8 bar) - Vertical tank X. PAUCHARD 500L galvanized (with pressure gauge) Hfedpfx Ajz Ab A Asd Nel - KAESER TBH 23 KRYOSEC refrigeration dryer.

Condition: used, Year of construction: 2022, operating hours: 15,000 h, functionality: fully functional, overall weight: 2,020 kg, power: 90 kW (122.37 HP), volume flow: 960 m³/h, operating pressure: 8 bar, pressure (max.): 8 bar, Equipment: documentation/manual, type plate available, We offer this used Hertz FRECON 90 P screw compressor, manufactured in 2022. Pressure: 8 bar Capacity: 16 m³/min Rated power: 90 kW Weight: 2020 kg Voltage: 400 V Frequency: 50 Hz Maximum shaft speed: 2340 min⁻¹ Date of manufacture: 04/2022 If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone. Hfodpfx Adoz Abb Ej Nol

Condition: used, Manufacturer: STT Type: Dryer 1500 Factory/Manufacturer number: 930671 Device type: Refrigerant dryer / Compressed air dryer Hjdpfszx Tiysx Ad Nefl Supply voltage: 400 V Phases / Frequency: 3-phase / 50 Hz Control voltage: 230 V Power consumption: 5,505 W Current consumption: 10 A Refrigerant: R134a Refrigerant charge: 830 g Design: Stand-alone unit

Condition: used, mileage: 1,88,569 km, power: 69 kW (93.81 HP), first registration: 02/2005, fuel type: diesel, overall weight: 2,330 kg, color: white, gearing type: mechanical, emission class: euro2, number of seats: 3, total length: 4,522 mm, total width: 1,844 mm, total height: 1,919 mm, loading space length: 1,890 mm, loading space width: 1,070 mm, loading space height: 1,250 mm, Equipment: ABS, central locking, Peugeot Expert 2.0 Refrigerated Van ----* Sold without TÜV (German technical inspection). * Engine and gearbox in good condition ----REFRIGERATED VEHICLE ? Refrigeration unit: Delphi Diavia frigo 2000 ? Driving refrigeration ? Sliding door on the right and left DRIVER ASSISTANCE & SAFETY ? ABS ? Airbag (driver) MULTIMEDIA & CONNECTIVITY ? Radio: Tuner ? CD player COMFORT & INTERIOR ? Electric windows ? Electrically adjustable exterior mirrors ? 3 seats ? Double passenger seat ? Central locking DRIVE & TECHNOLOGY ? Emission standard Euro 2 ? Front-wheel drive ? Configuration 4x2 ? 8 tires ? 5-speed manual transmission BODY & CARGO AREA ? Trailer coupling ? Sliding doors on both sides ? Partition ? 2 hinged doors at the rear - 180° opening ? Cargo area floor: wooden floor ? Cargo area side walls lined DIMENSIONS & WEIGHTS ? Variant: L1H1 Hodjz Axcyspfx Ad Nsfl ? Dimensions (cargo area/loading area) L × W × H: 1.89 × 1.07 × 1.25 m ? Dimensions (vehicle) L × W × H: 4,522 × 1,844 × 1,919 mm ? Permissible total weight: 2,330 kg ----? Registered as a truck ? 2 vehicle keys available ? VAT can be shown separately ----* We speak German and English. Greek / Ελληνικά: * We would be happy to make you a purchase offer for your vehicle * WEB: * E-Mail: ----Subject to price changes, prior sale, typographical errors and mistakes.

Condition: used, Year of construction: 1990, Industrial stationary piston air compressor in sound-insulated steel cabinet. Manufacturer: Reflex Model: ZU 57/3 – Typ 180 D Air receiver: 180 liters Made in Germany Complete unit including: Piston compressor Electric motor 180L air tank Pressure switch Noise reduction enclosure Hsdpeyl Nz Hsfx Ad Nsfl Condition: Used – Not tested. Sold as seen, ex works. Suitable for refurbishment or spare parts.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 10024031, overall weight: 197 kg, total length: 1,200 mm, total width: 800 mm, total height: 1,970 mm, power: 4.8 kW (6.53 HP), Equipment: refrigerant dryer, type plate available, Stationary piston compressor with refrigeration dryer, fine filter, condensate treatment unit for oil-water separation, and automatic condensate drain, 270 l tank, robust design and top quality, fully automatic on/off operation. Hjdpfjzin Skex Ad Njfl Equipped with all safety devices, completely ready for connection. From 7.5 kW upwards, standard equipment includes an automatic star-delta switch. Fifteen-year guarantee against rust penetration on the internally and externally hot-dip galvanized compressed air tank. Air outlet tank 3/4", air outlet refrigeration dryer 3/8", filling capacity approx. 520 l/min, automatic condensate drain AMD on the tank, automatic condensate drain in the refrigeration dryer, article number 2024712KK, recommended retail price: €4,049.00

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Hfjdpfxozzp N Ij Ad Nsl Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: used, mileage: 7,43,023 km, power: 265 kW (360.30 HP), first registration: 06/2015, fuel type: diesel, axle configuration: 6x2, wheelbase: 5,700 mm, color: red, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: air conditioning, cruise control, differential lock, parking heater, Color: Red, Seats: Fabric, Suspension: Air suspension with leaf springs, Liftable axle, Intarder, Digital tachograph, Electronic Braking System (EBS), Brake assistant, Electronic Stability Program (ESP), Auxiliary heating/automatic pre-selection, Comfortable front seats, Pneumatic front seats, Driver's armrest, Heated driver's seat, Headlight cleaning system, Radio/CD, Bluetooth mobile phone preparation, Rear parking assistance, Multifunction steering wheel, Lumbar support for driver, Electric windows, Fog lights, Electrically adjustable and heated mirrors, Tinted glass, Rear differential lock, Anti-roll bar: Front, Sun visor, Twin tires, Spare wheel, Axle load indicator, Hill start control, LED daytime running lights, Speed limiter: 90 km/h, Cabin suspension, PNEUMATIC CABIN SUSPENSION, PNEUMATIC CABIN SUSPENSION, INDUSTRIAL VEHICLES Iveco Stralis AT260S36 Isothermal box van with tail lift COLOR: RED YEAR: 2015-06 KM: 743,023 WHEELBASE: 6,050 GVWR: 26,000 DISPLACEMENT: 8,710 Euro 6 FUEL: DIESEL Hjdjz Amwrjpfx Ad Nofl

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 400 kg, total length: 1,800 mm, total width: 700 mm, total height: 1,700 mm, power: 15 kW (20.39 HP), operating pressure: 16 bar, pressure (min.): 6 bar, pressure (max.): 16 bar, noise level: 62 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 15 kW / 16 bar specifically designed for the high demands of laser cutting, providing clean compressed air (also available with 22 kW) complete 4-in-1 unit frequency-controlled servo motor 500-liter pressure tank refrigerant dryer fine filter new machine, delivery time approximately 1 week We would be happy to demonstrate the machine to you at our facility. highly efficient, permanent magnet servo motor frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color display single-stage screw unit air-cooled durable and low-maintenance optional: also available with an additional adsorption dryer Sales are exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria. Hodpfx Adeyll Ens Nsfl technical data (approx.): length: 1.75 m, height: 1.75 m, width: 0.72 m weight: approx. 420 kg pressure: 16 bar flow rate: approx. 1.7 m³/min at 10 bar (1.2 m³/min at 16 bar) noise level: 62 ± 2 dB(A)

Condition: used, Year of construction: 2008, operating hours: 85,394 h, functionality: fully functional, machine/vehicle number: APF 136194, overall weight: 2,550 kg, total length: 2,900 mm, total width: 1,450 mm, total height: 2,200 mm, space requirement length: 3,000 mm, space requirement width: 1,600 mm, motor manufacturer: ABB, fuel type: electric, ATLAS COPCO ZT 55 VSD Screw Compressor with Inverter, 18.5 kW, 3.35 m3/min, 13 bar Our company offers a professional level of service and high-quality products, all of which have been “tested” in the market, guaranteeing a successful partnership with you. We offer a warranty on used compressors and dryers! Our strength is our 24/7 compressor service. ATLAS COPCO GA18VSD Screw Compressor with Inverter, 18.5 kW, 3.35 m3/min, 13 bar Technically sound and ready for operation. I also have a dryer with a filter set. Hedpfey Amh Hox Ad Nofl A preferential price is offered for the combined purchase.

Condition: used, Year of construction: 2003, Colour: Grey Empty weight: 532 kg Dimensions (LxBxH): 120 x 90 x 110 cm - Details: Hfjdsyr Rnnjpfx Ad Nol - └ Description: Includes dryer and air tank - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 2210711 - Transport dimensions: 1200mm x 900mm x 1100mm (l x w x h) - Transport weight [kg]: 532kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, Colour: Blue Empty weight: 1.800 kg Dimensions (LxBxH): 235 x 124 x 199 cm Hedjyvr E Dspfx Ad Njfl - Details: - └ Description: 48,000 operating hours - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: CD10007783001 - Transport dimensions: 2350mm x 1240mm x 1990mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, We offer for sale a screw compressor with an integrated condensation dryer, type Aircraft / Fini A-K-Max 7.5-10-270 K (IE3), manufactured in 2021 by Aircraft. It is manufactured and marked according to CE standards (European conformity). The compressor has been used sparingly and regularly serviced, with documented operating history, including Czech operating and maintenance manuals. Technical parameters: Capacity: 1050 l/min, Maximum pressure: 10 bar, Tank size: 270 l, Dimensions: L: 1200, W: 680, H: 1540 mm, Weight: 280 kg, Electric motor power: 7.5 kW, Voltage: 400 V, Sound pressure level Lp 62 dB. The compressor is in very good technical condition and is ready for immediate use. It can be viewed at our warehouse in Přerov. Hsdszy Spzepfx Ad Nsfl

Condition: excellent (used), Year of construction: 2008, ATLAS COPCO GA90VSDFF screw compressor, equipped with a frequency converter and air dryer, recently serviced. Technical data: capacity: 17.070 m3/min; 90 kW motor; maximum pressure: 12.8 bar; operating hours: 13435 h; year: 2008. Price: 48,500 net Price: 59,655 gross The compressor is in full working order, ready for operation, and comes with a warranty. We also provide service support. Hfodpezzbyfofx Ad Nel

Condition: new, machine/vehicle number: 691340002, hoku 119-90 – 2-stage, compression-enhancing, mobile piston compressor The universal model with V-belt drive and high-quality components, specifically designed for tradespeople, for use in environments where the quality of compressed air, as well as durability and efficiency, are essential. Long service life thanks to high-performance units with low speeds, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling Hedpfx Adevl Ev Ao Nefl through a large fan wheel, an aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air, improved efficiency through optimized units, comes standard with a Condor pressure switch, pressure gauge, pressure regulator with water separator and quick-release coupling, motor with overload protection. Technical data: Intake capacity 674 l/min, delivery capacity 505 l/min, maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V Ex works, from the Seevetal location, without transport, as inspected, subject to prior sale.

Condition: new, Year of construction: 2025, machine/vehicle number: 10027619, Piston compressor with intake capacity of 620 l/min, delivery capacity at 6 bar of approx. 520 l/min, maximum pressure of 10 bar, tank capacity of 270 l, 2 cylinders with 2 stages, speed of 920 rpm, 400 Volt, 50 Hz, 4 kW motor with Condor pressure switch and pressure gauge, including pre-filter, desiccant dryer (230 Volt), automatic tank drain (230 V), and oil/water separator, bolted onto a safety base pallet Hsdpjwgcb Dofx Ad Nsfl with rubber vibration dampers, immediately available, Ex Works, from the Seevetal location, excluding transport, subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Robust compressors for professional use with V-belt drive and a high-performance 2-cylinder unit made of cast iron. The universal model with V-belt drive and high-quality components, specifically designed for tradespeople, for use in environments where the quality of compressed air, as well as durability and efficiency, are essential. Long service life thanks to high-performance units with low speeds, safe transport and excellent stability thanks to large wheels with a parking brake, optimal cooling through a large fan wheel, an aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air, improved efficiency through optimized units, standard equipment includes a Condor pressure switch, pressure gauge, pressure regulator with water separator and quick-release coupling, motor with overload protection. Technical data: Intake capacity 500 l/min, delivery capacity 375 l/min, maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, Hfedpsvl Euxofx Ad Nel motor power 3 kW / 400 V Ex works, from the Seevetal location, excluding transport, as inspected, subject to prior sale.

Condition: used, mileage: 6,32,811 km, power: 265 kW (360.30 HP), first registration: 05/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, color: green, gearing type: automatic, emission class: euro6, loading space volume: 47 m³, loading space length: 7,400 mm, loading space width: 2,480 mm, loading space height: 2,540 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, * ANTOS 1836 L refrigerated box truck, 7.40 m, with folding tail lift, BÄR, 2,000 kg capacity * CARRIER SYBERIA, hydraulically driven, in-motion refrigeration * Engine OM 470, R6, 10.7 l, 265 kW (360 hp) Sale only in conjunction with trailer, internal number 4812. Total price, net: €39,800,-- + * Vehicle number for customer inquiries: 4811 * Engine version Euro VI, with OBD-C * Predictive Powertrain Control * Active Brake Assist * Differential lock, rear axle * Air conditioning * Lane Keeping Assist * Tail lift * Driver Attention Assist * High Performance Engine Brake * Air suspension, rear axle * Electronic Stability Program (ESP) * Trailer brake connection, rear, Duo-Matic+Standard * Trailer brake, 2-line, brake connections left * Trailer socket 24 V, 15-pin * Antos * Electronic braking system with ABS and ASR * Driver's air-suspended seat, comfort * Gearbox G 211-12/14,93-1,0 * Comfort central locking system * Mercedes PowerShift 3 * Reversing warning system, combined with hazard warning lights * External sun visor, transparent * Fuel tank 390 l, left, 650 x 565 x 1250 mm, aluminum * Cruise control * Storage compartment, high, on engine tunnel * AdBlue tank 60 l, left * Roof hatch/ventilation flap, roof * Weight variant 18.0 t (7.5/11.5) * Heater, electronic compressed air supply unit * M-cab ClassicSpace, 2.30 m, tunnel 320 mm * Engine OM470, R6, 10.7 l, 265 kW (360 PS), 1800 Nm * Wheelbase 5500 mm * Tires, tubeless, 315/70 R 22.5, rear axle * Tires, tubeless, 315/70 R 22.5, front/steerable axle/tag axle * Stabilizer, front axle * Preparation for toll collection * Engine PTO, rear, hydraulic pump ISO 7653D * Tachograph, digital, EC, speed, ADR * Preparation for low fifth wheel coupling * Environmental badge (green) * Two-seater * Serviced according to maintenance schedule * 2/3-door No liability for printing and typographical errors. Sale only to commercial customers. Subject to errors and prior sale. * TOP SERVICE + QUALITY * We can gladly provide you with a LEASING/FINANCING/HIRE PURCHASE offer. Guarantee insurance available on request from the insurance company. * TÜV / UVV tail lift inspection / tachograph inspection and installation of OBU device by our local partners. * Customs license plates for 30 days. All customs documents for export are available, but must be requested individually. * Toll payments for Toll-Collect can be arranged in-house. * Free transfer from Stuttgart Airport or Metzingen (Württ.) train station. * TRAIN STATION: 72555 METZINGEN/WÜRTT. Hsdpfx Adez Awy Do Njfl * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WhatsApp number: * ---- Visit us on our website at: * Constantly over 200 vehicles in stock.

Condition: ready for operation (used), For sale: original Hanomag R35/45. Please submit your offer! Drives well, has no oil leaks, MOT is expired but can be renewed at additional cost. Price negotiable. The vehicle was always stored indoors. Now available for sale. Year of manufacture: 1956, with rare features and a functional Roots blower increasing output to approx. 45 hp. This machine is a technical one-off and is in very good, working condition. Equipment & details: • Type: R35/45 A (agricultural tractor version) • Engine: 4-cylinder diesel engine with mechanically driven Roots blower. Many original stickers and type plates on the machine. Output: approx. 45 hp • Transmission: 5 forward gears + 1 reverse, plus additional reduction (total 10 gears) • Year: 1956 • Rare: Front auxiliary PTO/extra PTO shaft via separate lever • Runs, steers and brakes flawlessly, starts reliably Condition: • Very good overall technical condition • Original appearance with lovely patina • Complete dashboard, inscriptions, lighting, etc. No improvised repairs – all mechanically robust • Ideal as a collector’s item, for vintage meetings or for enthusiasts. Rarity & value: • The Roots blower was only installed in a few models or by Hanomag authorized workshops for power increase. • Such authentic vehicles with working blower and special equipment are extremely rare. Subject to errors. Pictures/description may vary. Hfjdpfswvf E Dox Ad Njl

Condition: ready for operation (used), Year of construction: 2008, operating hours: 20,000 h, functionality: fully functional, 4 x Kaeser compressors, type DSD 238, with an average of 20,000 operating hours each. Hfsdpfx Aoz Ap Sxed Nel Inspection welcome in Bremerhaven. Sale is B2B only – preferably all units together for self-dismantling.

Condition: used, mileage: 1,64,696 km, power: 175 kW (237.93 HP), first registration: 03/2021, fuel type: diesel, maximum load weight: 7,440 kg, overall weight: 16,000 kg, axle configuration: 4x2, wheelbase: 4,760 mm, color: other, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: air, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, This offer is non-binding. Errors and prior sale are subject to change. If a foreign currency is specified, it will be converted at the current daily exchange rate. The currency of the vehicle's location applies. Engine: OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm, wheel configuration 4x2, wheelbase 4760 mm, plastic tank 180 l, AdBlue tank 25 l, S cab, S cab, exterior sun visor, transparent, locking system, with central locking, sun blind, side, driver's side, air conditioning, driver's comfort suspension seat, electronic braking system with ABS and ASR, power windows, electric, on both sides, lane keeping assist, Active Brake Assist, airbag, driver, cruise control. Hedpfxjzz Dmzo Ad Nefl

Condition: used, BOGE C 9 Screw Compressor, 7.5 kW / 10 bar Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Machine Type: Screw Compressor / Industrial Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar For sale is a used BOGE C 9 screw compressor, including the ELMED HELIO-STROB BETA A2 stroboscope measuring system, separate stroboscope hand lamp, connection cable and operating manual. The compressor is suitable for supplying compressed air to machines, workshops, production facilities and manufacturing companies, as well as for general industrial compressed air applications. Operation is via the BOGE base control system with a digital operating and display panel. Technical data: Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Equipment Type: Screw Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar Motor Power: 7.5 kW Motor Speed: 3000 min⁻¹ Operating Hours (according to display): 15,749 h Control System: BOGE base control CE Marking: present Made in Germany ELMED HELIO-STROB: Manufacturer: ELMED Messtechnik Series: HELIO-STROB Type: BETA A2 Equipment Type: Stroboscope Measuring System Mains Connection: 115 / 230 V AC Mains Frequency: 50–60 Hz Max. Power Consumption: 80 VA External Clock Input: present CE Marking: present BOGE base control system Digital operating and display panel Emergency stop switch Sound-insulated housing CE marking ELMED HELIO-STROB BETA A2 control unit ELMED stroboscope hand lamp External clock input Digital display Connection cable Operating manual HELIO-STROB Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. BOGE operating display shown in the on state. ELMED HELIO-STROB shown in the on state. Nameplates present. Dimensions: BOGE C 9 (W × D × H): approx. 483 × 907 × 955 mm ELMED HELIO-STROB BETA A2 control unit: approx. 280 × 240 × 80 mm ELMED hand lamp: approx. 182.5 × 117 × 117 mm Shipping Data: Weight BOGE C 9: approx. 215 kg Hfjdpfezxpi Nox Ad Nsl Weight ELMED control unit: approx. 2.3 kg Weight ELMED hand lamp: approx. 1.5 kg Total weight of equipment: approx. 219 kg plus cable and operating manual Shipping by freight forwarder possible Scope of Delivery: 1 × BOGE C 9 screw compressor 1 × ELMED HELIO-STROB BETA A2 control unit 1 × ELMED stroboscope hand lamp 1 × Connection cable 1 × Operating manual HELIO-STROB Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, mileage: 2,85,300 km, power: 235 kW (319.51 HP), first registration: 07/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space volume: 43 m³, loading space length: 7,350 mm, loading space width: 2,500 mm, loading space height: 2,340 mm, Equipment: ABS, air conditioning, navigation system, parking heater, tail-lift, Tail lift Bär 2,000 kg, 1,800 mm, accessible underneath. * Cooling unit Thermo King T-1200R, Diesel + 380 V, temperature recorder. * Service booklet maintained ----Deep-freeze box Schmitz with partition and side loading door on the right (920 mm wide, 2,190 mm high) with access ladder. ----* Movable partition in the loading area * Box with rear doors and tail lift Hedpfx Aowrkkwod Nsfl * Front axle air-suspended * Front axle 8.0 t * Electronic brake system (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 5,200 mm * Driver's comfort suspension seat * Air conditioning * Residual heat utilization * Additional hot water heating, driver's cab * Roof hatch/ventilation flap roof * Reversing alarm * ClassicSpace M driver's cab, 2.30 m wide, engine tunnel 320 mm high * MirrorCam * Locking system with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automatic transmission * Mercedes PowerShift 3 * Heated driver's seat * Tires 315/70 R 22.5 * Tires 315/70 R 22.5 rear axle * Air suspension, rear axle * Comfort telephony, wireless charging * Navigation system * Tank 290 liters * AdBlue tank 60 liters * Automatic high/low beam and cornering light * Fog lights, LED daytime running lights * Engine OM936, R6, 7.7 l, 235 kW (320 hp), 1300 Nm * Engine version Euro 6, D * Engine brake * Aluminum cargo area floor * Load securing certified according to DIN EN 12642 Code XL * Stability control assistant (ESP) * Lane keeping assistant * Distance assistant * Attention assist * Traffic sign assistant * Active Brake Assist 5 * Tire pressure monitoring * Airbag, driver * Cruise control * Actros S/M driver's cab model generation 5 * Load securing rails * EBS * Without spare wheel ----Sale only to commercial customers! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We would be pleased to offer you a leasing or financing offer.

Condition: used, axle configuration: 3 axles, loading space length: 1,35,000 mm, loading space width: 24,900 mm, loading space height: 22,200 mm, total width: 26,000 mm, total height: 37,300 mm, Year of construction: 2012, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front - Disc brake system = Notes = Hfedey Svrtjpfx Ad Njl For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at ...). Rohr RSK/34 IV refrigerated semi-trailer with tail lift Refrigeration unit: Carrier Vector 1850, tail lift: Palfinger 2500KL (2,500 kg), additional headlights on the left, right, and rear of the vehicle, air suspension, Duomatic trailer coupling, Daimler axle, Wabco ABS, disc brakes, spring brake, 3rd axle steered, 1st and 2nd axles liftable, cargo space dimensions: length: 13,500 mm, width: 2,490 mm, height: 2,220 mm, tire tread: 1st axle 12-13 mm, 2nd axle 10-16 mm, 3rd axle 9-16 mm, permissible total weight: 34,000 kg, unladen weight: 9,980 kg, payload: 24,020 kg. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. Further information can be found on our website. ... Errors, changes, and prior sale are subject to change!!! Steering axle = Additional Information = Unladen weight: 9,980 kg Payload: 24,020 kg GVW: 34,000 kg Please contact Tobias Ebert for further information.

Condition: good (used), Year of construction: 2004, operating hours: 35,000 h, functionality: fully functional, power: 15 kW (20.39 HP), type of cooling: air, Equipment: refrigerant dryer, Almig screw compressor flex 15 Drive (year of manufacture 2004) – including MDX 3600 air dryer (year of manufacture 2011) – well-maintained, inspected, and ready for use. For sale is an Almig screw compressor flex 15 Drive (year of manufacture 2004, 15 kW power) in well-maintained, technically flawless condition – including a matching MDX 3600 air dryer (year of manufacture 2011). The compressor has been regularly maintained and is in very good condition both visually and technically. It is fully functional, inspected, and ready for immediate use. The included MDX 3600 air dryer reliably provides dry, clean compressed air, thus protecting your downstream equipment and tools. With our comprehensive all-inclusive package, we can personally take care of the complete service for you – from delivery to commissioning of your new compressor. This includes unloading, installing, and aligning the system. Subsequently, our experienced service technicians will professionally commission the system, perform all necessary functional tests, and ensure that your Almig flex 15 Drive, together with the MDX 3600 air dryer, runs reliably and efficiently. Hsdpfszlgmfex Ad Nsfl In addition, we offer individual training sessions for your employees so that you can optimally utilize the system from the very beginning. We will also be happy to continue to support you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machinery. We place great emphasis on personal support and are always happy to assist you even after the purchase. You also have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come to our location and see for yourself the condition and functionality. With us, you are in the best hands – professionally, reliably, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information without guarantee.