Used Condensate for sale (866)

Condition: good (used), Condensate drain, pressure reducing valve, condensate drain, valve, check valve, control valve -230 VAC/50-60 Hz Temperature: 1 °C/ 60 °C -Nominal pressure: min. 1 max. 16 bar -Capacity: 22 L/h Iodjb A S Epspfx Adweal Price: per piece -Quantity: 2 available -Weight: 2.8 kg

Year of construction: 1996, condition: excellent (used), Used condensate vessel Manufacturer: Gestra Year of manufacture: 1996 Мы говорим по русски! Iaedpfxeiz A Tze Adwjl Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm Iaodpfx Aedzqn Usdwjl + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Year of construction: 2025, condition: new, functionality: fully functional, Efficient and gentle removal of excess liquid instead of long draining times: Ijdpfxoxc T Nus Adwoal The pressure dewatering unit has been specially designed to efficiently remove excess liquid from preserved vegetables as well as pickled or thawed vegetables. The machine is easy to operate and can be handled by a single person. The product to be dewatered, such as canned mushrooms, pickled or thawed vegetables, is placed into the perforated crate. Once the system is started, a plate is lowered onto the product. The product is gently dewatered by applying uniform pressure over this plate. Efficient dewatering and minimal space requirement! The processing of pickled, thawed, or preserved vegetables is simplified and accelerated, as prolonged draining times are eliminated by efficient dewatering through gentle pressing. Due to its compact design, the machine requires minimal space and can therefore be easily integrated into various areas of production. Adjustable working pressure: approx. 6 bar Dimensions (LxWxH): 700x650x1200 mm Weight: approx. 150 kg

Condition: good (used), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/water separator for compressed air condensate. ● Treatment plant for separating compressed air condensate and condensates with difficult separation properties (e.g. stable emulsions) by means of cross-flow filtration ● Physical separation principle guarantees residual oil content of < 5 mg/l in water Intelligent control concept with programmable control for safe analog operation, incl. plain text display by means of text display, Fault monitoring via alarm messages with potential-free contacts and optional external network connection Optimized cleaning by comparison of input/output extends cleaning intervals and saves operating costs ● Thermally and chemically highly resistant ceramic membrane with long service life ● Antifreeze protection with integrated heating ● High-quality, corrosion-resistant materials for vessels, piping, pumps, seals, and valves Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5,5 bar, pmax: 8,5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C Isdpfx Adsidx Uiowsal You can find additional filtration systems in other sizes—new and used—in our shop! International shipping costs upon request!

Condition: good (used), Condensate drain, pressure reducing valve, condensate drain, valve, check valve, control valve -Manufacturer: Bekomat Ecoair, condensate drain type KA02 ACO AO / AK 05 -Voltage: 230 VAC/50 Hz Temperature: 1 °C/ 60 °C -Nominal pressure: max. 16 bar -Quantity: 3 available Iodjvuzpkspfx Adweal Price: per piece -Transport dimensions: 220/140/H150 mm -Weight: 1.6 kg/pc.

Year of construction: 2006, condition: excellent (used), 1.CestraLOOS 800l, 0,1Bar 2nd Flowserve Cestra Power 400kw Iedpfxjfm Rumo Adwjal Content 15l Y.O.M. 2006 3.Cestra YY,1997 Power 400kw Content 18l 4.cestra condensate collection tank YY,1996 capacity 250l

Condition: good (used), Air conditioner, air conditioning, condensate pump for air conditioning, defrost water pump -Air conditioners Iaedped Dcf Hsfx Adwol -Manufacturer: Eckerle -Type: EE2000 -Number: 1x pumps available -Price per piece -Dimensions: 150/190/H80 mm -Weight: 0.5kg

Condition: like new (used), Year of construction: 2023, SEPRO Success 11C (2023) Linear cartesian robot , 1500mm Number of axis: 3 X = 1500 mm Y= 500 mm Z= 1000 mm Payload: 5 kg Euromap 67 More information in photos of this robot, complete manuals available. SEPRO SUCCESS 11 – Technical Data (Summary) Ijdpfjx Dnc Sox Adwsal Robot type: Success 11 Serial number: R009519 Mechanics 1. Payload: 5 kg 2. Robot weight: 204 kg 3. Robot dimensions: 2430 × 1200 × 1570 mm 4. Max. pneumatic pressure: 7 bar 5. Air consumption: 140 l/min (normal), 260 l/min (peak) Stroke axes X-axis (horizontal stroke): 1. Stroke: 1500 mm 2. Speed: 2.0 m/s 3. Repeatability: ±0.1 mm Y-axis (horizontal take-out): 1. Stroke: 500 mm 2. Speed: 2.0 m/s 3. Repeatability: ±0.1 mm Z-axis (vertical): 1. Stroke: 1000 mm 2. Speed: 3.0 m/s 3. Repeatability: ±0.1 mm Rotations 1. R1 pneumatic rotation: 0–90° 2. R3 pneumatic rotation: 0–180° or 0–90° Control system – Visual 2 1. Weight: 43.5 kg 2. Dimensions: 550 × 400 × 295 mm 3. Power supply: 3×400–480 V ±10% 4. CPU: i.MX537 / Cortex A8 @ 800 MHz 5. Memory: 512 MB DDR + 512 MB Flash 6. SD card: 4 GB 7. I/O: 8. Robot: 16 inputs / 16 outputs 9. Cabinet: 7 inputs / 8 outputs 10. USB ports: 1× Master USB, 1× Slave USB 11. Ethernet 10/100 Pneumatics 1. 2 pneumatic circuits 2. Vacuum and pressure functions available Environmental conditions 1. Operating temperature: +5 to +40 °C 2. Storage temperature: –25 to +55 °C 3. Humidity: 30–95% (non-condensing) 4. Protection rating: IP22 / IK07 Options 1. PC Editor (Windows XP to Windows 7) 2. Conveyor control (3×42V AC to 3×550V AC) 3. Safety kit for access door 4. 1× conveyor

Condition: good (used), Year of construction: 2001, In good technical condition and fully operational. Manufacturer: Rollsett Machine Oy Finland. Year of manufacture: 2001. Profile height: 18 mm. Entry width: 1,250 mm. Overall width: 1,146 mm; 1,166 mm. Construction width: 1,100 mm. Min./max. length: 0.5 lm/8 lm at a thickness of 0.50 mm. Accessories, aids: screws, sealing tapes, profiled seals, anti-condensation treatment, light profiles. Iasdpjx Tf Itjfx Adwsl

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, NEW - Charging station Unox Bakertop X 10 Digital.ID - NEW Convection oven for 10 trays 60x40 cm Exhaust hood on top with steam condenser Proofing cabinet below for 10 trays 60x40 cm Mobile oven with locking casters USB connection Only from us: DGUV V3 tested Connection: 400V, 32A CEE plug Water connection: 3/4 inch, drain: DN 40 Dimensions (W x D x H): 865 x 1100 x 2200 mm Oven NEW & SAB certified 12 months warranty + spare parts service Options: Pure water filter Baking trays Ethernet connection DDC.App Spray & Rinse cleaner Service package Maintenance contract Delivery service Instruction & commissioning Visit our Unox Backtube! Iedpfx Asyaf Dyedwjal

Condition: like new (used), Year of construction: 2018, machine/vehicle number: IntNr231086, Int. No. 231086 1449 Oil/Emulsion Mist Extraction System AR FILTRATIONI S.R.L. Extraction Series ARNO 2: Mechanical AR 5-stage air purifier for emulsion mist/oil smoke Air flow rate: 2600 m³/h (1.5 kW) Voltage/frequency: 230/400 V, 50 Hz Noise level: approx. 70 dBA Stage 1 – Centrifugal condenser, self-cleaning Stage 2 – Metal mesh filter, washable Stage 3 – Pocket filter Stage 4 – Fine filter mat, washable Stage 5 – HEPA ultra-fine filter Overall unit filtration efficiency: up to 99.97% - Quick and easy maintenance, once per year, high operational reliability - Sturdy construction, minimal space required - Recovery of up to 80% of condensed coolant lubricant - Design and performance in compliance with current standards - Approx. €415.00 in energy savings per air purifier - Reduction of emissions by 9,000 kg CO2/year/unit - Protects sensitive machine tool components - Protects both the environment and personnel Iodex U Dhuepfx Adweal Dimensions: approx. 990 x 570 x 1400 mm Weight: approx. 120 kg Short delivery times available by arrangement. The machine can be inspected under power by appointment. Subject to technical modifications, errors, and interim sale!

Condition: new, functionality: fully functional, Year of construction: 2025, Microsilica, also known as silica fume or condensed silica fume, is a byproduct of producing silicon metal or ferrosilicon alloys. Microsilica powder grinding mills are used to process microsilica powder for various applications, including the production of high-performance concrete, refractory materials, and other specialty products. Grinding mills play a crucial role in reducing microsilica particles to the desired fineness. Here are some key aspects related to microsilica powder grinding mills: 1. Mill Types: - Ball Mill: A traditional ball mill is commonly used for grinding microsilica. It relies on the impact and attrition forces to reduce particle size. It is effective for both wet and dry grinding. Iajdpsq Nxp Sofx Adwsl - Vertical Roller Mill (VRM): VRM technology is known for its energy efficiency and the ability to grind materials into a narrow particle size distribution. It is suitable for grinding microsilica. 2. Grinding Process: - The grinding process involves feeding microsilica particles into the grinding mill. The grinding media (balls or rollers) inside the mill crush and grind the microsilica particles into a fine powder. 3. Particle Size Distribution: - Controlling the particle size distribution is crucial for achieving the desired properties in the final product. The grinding mill should be equipped with mechanisms to control and monitor particle size distribution. 4. Mill Design and Components: - The design of the grinding mill, including the type of grinding media, liners, and the grinding chamber, influences the efficiency and performance of the milling process for microsilica. 5. Air Classification (Optional): - In some cases, air classification systems are integrated into the grinding process to separate fine particles from coarser ones, ensuring a more uniform product. 6. Control Systems: - Advanced grinding mills often come with automated control systems to regulate various parameters such as feed rate, mill speed, and product fineness. 7. Material Handling: - Efficient material handling systems are essential to transport microsilica to and from the grinding mill. This may involve pneumatic or mechanical conveying systems. 8. Cooling Systems: - Grinding processes generate heat, and efficient cooling systems are often integrated to maintain the temperature within a controlled range. 9. Dust Collection: - Microsilica powder grinding can produce airborne dust. Dust collection systems are necessary to maintain a clean and safe working environment. 10. Quality Assurance: - Grinding mills for microsilica should be equipped with quality assurance features, such as in-line particle size analysis, to ensure consistency in the final product. When selecting a microsilica powder grinding mill, factors such as production capacity, energy efficiency, and the required particle size distribution should be considered. Additionally, mills should be chosen based on the specific characteristics of the microsilica being processed and the intended application of the final product.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,520 h, overall weight: 235 kg, total height: 1,055 mm, number of axes: 3, This 3-axis Trotec Speedy 360 was manufactured in 2019, featuring a robust CO₂ laser system with a power range of 40-120W. It offers a maximum working area of 32 × 20 inches and supports a variety of materials with its multifunctional table options, including a vacuum table and honeycomb cutting tabletop. Ideal for precise cutting and engraving, this machine includes JobControl® Expert Software for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the Trotec Speedy 360 machine we have for sale. Contact us for further details regarding this machine. Additional equipment • Autofocus: Light Bar Focus (electro-optic) • Positioning: Laser pointer (655 nm, Machine Benefits Technical Machine Benefits • Ergonomic access to working area • Coaxial air assist • Optional features: protection kit, air assist, rotary attachment, jobcontrol® vision, vacuum table, honeycomb cutting tabletop, specialized cutting tables • Exhaust system: surface exhaust via rear of the engraving cabinet, table exhaust with vacuum and cutting table Iedpfox U Th Rex Adwoal • Laser safety: classification: cdrh laser safety, ce tested, laser class 2 • Laser safety: safety features: duplicate interlock system, front-side loading lid • Temperature: +15°c to +25°c • Humidity: 40% to max. 70% (non-condensing) • Dust-free environment: 2nd degree per iec 60947-1 Extra Information Movement Working Area: 813 × 508 mm Loading Area: 890 × 600 mm Max. Workpiece Height: With working table: 210 mm Without working table: 280 mm Motion System Speed: 355 cm/sec Acceleration: 5g Workpiece Max. Material Load: Static: Up to 100 kg Dynamic: Up to 30 kg Table Working Tables: Standard: Ferromagnetic engraving table Optional: Multifunctional table system and Honeycomb cutting tabletop Tools Lenses: Standard: 2.0" Optional: 1.5", 2.0" clearance lens, 2.5", 4.0" Dimensions Machine Depth 1221 mm

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 66.7 kW (90.69 HP), type of cooling: air, overall weight: 1,060 kg, total width: 1,100 mm, total length: 2,600 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 49.4 kW (67.17 HP), Aircooled chiller/Heat pump CLIMAVENETA MEHP IS G07 0082 66.7 kW/49.4 kW Cooling capacity: 66.7 kW / 18.97 tons (12/7 — 35°C) Heating capacity: 49.4 kW / 14.05 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Kiplink. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi BVK110FBAMT (scroll, inverter) + 1 pcs. Mitsubishi BV110YBAMT (scroll) Type of refrigerant: R32 Number of fans: 3 pcs. (Frequency inverter) Iasdjx Uyudopfx Adwol Hydraulic module: 1 pcs. water pump Grundfos MGE80A 1-56C-IA-110 (Frequency inverter) Dimensions: 2.6x1.1x2.4 m Weight: 1060 kg Working hours: 0/0 h. Condition: New

Condition: excellent (used), Binder Model MKF 115 E3.1 Binder Climatic Test Chamber Model MKF 115 E3.1 Temperature range: -40 °C to +180 °C Humidity range: 10 % RH to 98 % RH Integrated 20 L water reservoir 4 potential-free relay contacts APT.line™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with LED chamber illumination Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ Basic Edition Fault diagnosis system with visual and audible alarms Intuitive touchscreen controller with time-segment and real-time programming Internal data logger, measurement data exportable in open format via USB 50 mm access port with silicone stopper, left side Class 2 temperature safety limiter (DIN 12880) with visual alarm 4 casters (2 with locking brakes) Computer interface: Ethernet 230 V outlet on right side control panel Adjustable ramp function Integrated strip chart recorder Real-time clock Door heating Alarm notification on low water level in the fresh water tank 2 stainless steel shelves Hose burst protection, incl. water supply and drain up to 1m height Interior chamber made of stainless steel Cooling by compression refrigeration unit TECHNICAL DATA: Cabinet dimensions: Width 1000 mm Height 1725 mm incl. feet/castors Depth 865 mm incl. lugs &/connections Interior dimensions: Width 600 mm Height 480 mm Depth 400 mm Volume: Chamber volume 115 liters Net device weight (empty) 280 kg Max. total load 60 kg Max. load per shelf 30 kg Performance data Temperature: Temperature range -40...180°C Temporal temperature deviation 0.1...0.6 ± K Spatial temperature deviation 0.1...1.3 ± K Average heat-up rate according to IEC 60068-3-5: 5.5 K/min Average cool-down rate according to IEC 60068-3-5: 4.5 K/min Max. heat compensation 2500 W Iodpex Ux Ivofx Adweal Climate performance data: Temperature range 10...95°C Humidity range 10...98 % RH Temporal temperature deviation depending on setpoint 0.1...1.3 ± K Max. heat compensation 400 W Electrical data: Rated voltage 400V 3N~ ±10% 50Hz Rated power 4.5 kW 7.5 A Energy consumption at 25°C / 60% RH 1.25 kW Fittings: Number of shelves 4/4 (std./max.) Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors!) If you have further questions, we would be happy to answer them by phone.

Year of construction: 2026, condition: new, functionality: fully functional, Unox Bakertop X 10 Digital ID convection oven Convection oven for 10 trays 600 x 400 mm Unox oven with Intelligent Performance Touch panel with 1,000+ programs Core temperature probe USB connection Top model with AI DGUV V3 safety inspected exclusively by us Connection: 400V, 32A CEE plug Water connection 3/4 inch, drain DN 40 Dimensions: 860 x 1018 x 1219 mm (W x D x H) Oven NEW & SAB inspected 12 months warranty + spare parts service Options: Pure water filter Baking trays Lievox proofing cabinet Ethernet connection for DDC.App Exhaust hood with vapour condenser Iodpfx Adoyaf Dmjwsal Spray & Rinse cleaner Service package Base stand Maintenance contract Delivery service Commissioning & user training Visit our large showroom!

Condition: like new (used), Year of construction: 2018, machine/vehicle number: IntNr231087, IntNo231087 AR FILTRATIONI S.R.L. 1449 Oil/emulsion mist extraction system Extraction unit series ARNO 2: Mechanical AR 5-stage air cleaner for emulsion mist/oil smoke Air flow rate 2600 m3/h (1.5kW) Voltage Frequency 230/400 50 V Hz Noise level dBa approx. 70 Stage 1- Centrifugal condenser, self-cleaning Stage 2 - Metal mesh filter, washable Stage 3 - Pocket filter Stage 4 - Fine filter mat, washable Stage 5 - Hepa ultra-fine filter Filter performance of the entire unit: up to 99.97% - Quick and easy maintenance, once a year, high operational reliability - Robust design, low space requirement - Recovery of up to 80% of the condensed cooling lubricant - Design and function in accordance with current standards - Energy savings of approx. 415.00 euros per air purifier - Reduction in emissions of 9,000 kg CO2/year/system - Protects the sensitive parts of the machine tool - Protects the environment and people Dimensions: approx. 990 x 570 x 1400 [mm] Weight: approx. 120 [kg] Delivery time at short notice by arrangement. The machine can be inspected by appointment. Ijdpfx Adox U Dhnjwsal Changes and errors in the technical data and information as well as prior sale reserved! IntNo231084 AR FILTRATIONI S.R.L. Extraction series ARNO 2: Mechanical AR 5-stage air purifier for emulsion mist/oil smoke Air flow rate 2600 m3/h (1.5kW) Voltage Frequency 230/400 50 V Hz Noise level dBa approx. 70 Stage 1- Centrifugal condenser, self-cleaning Stage 2 - Metal mesh filter, washable Stage 3 - Pocket filter Stage 4 - Fine filter mat, washable Stage 5 - Hepa ultra-fine filter Filter performance of the entire unit: up to 99.97% - Quick and easy maintenance, once a year, high operational reliability - Robust design, low space requirement - Recovery of up to 80% of the condensed cooling lubricant - Design and function in accordance with current standards - Energy savings of approx. 415.00 euros per air purifier - Reduction in emissions of 9,000 kg CO2/year/system - Protects the sensitive parts of the machine tool - Protects the environment and people Dimensions: approx. 990 x 570 x 1400 [mm] Weight: approx. 120 [kg] Delivery time at short notice by arrangement. The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, BROWARY & DISTILLERIES Sp. z o.o. has been providing professional consulting, design, and implementation of beer and distillate production lines for many years. We produce private label products for our clients and automated drink dispensing systems. Our company’s strength lies in our highly qualified and experienced team of engineers, enabling us to offer comprehensive turnkey project execution. To date, we have designed and commissioned 28 craft breweries and 3 craft distilleries in Poland, produced over 200 private label craft alcohol brands for our clients, and installed 30 DRINK WALL automated drink dispensing systems in hotels and restaurants. We are pleased to offer you a used SALM brewpub brewery. Since 1924, SALM has been producing complete brewing systems. This brewery was manufactured in 2023 for a client in Bucharest and has only brewed 5 batches to date, which allows us to consider the offered installation as practically brand new! The brewery is in perfect technical and visual condition. Below is the full technical specification of the offered brewery: Annual production capacity: 1,100 hl of beer 1. Two-vessel brewhouse, 5.5 hl, stainless steel, A-frame design with Salm Brewmatic 02 computer control system – 1 unit. Iasdpfx Aex Aky Dodwsl 2. Copper cladding on the mash tun and lauter tun’s cylindrical sections. 3. Stainless steel brewhouse platforms – 2 units. 4. External wort boiling kettle with atmospheric gas burner, powered by natural gas or propane – 1 unit. 5. Vapour condenser for brewhouse, mash, and lauter tuns, stainless steel, with built-in injection condenser and fan for odorless operation and DMS removal – 1 unit. 6. Two-roller malt mill – 1 unit. 7. Wort cooler – 1 unit. 8. Mains water chiller (for water above 10°C) – 1 unit. 9. Whirlpool – 1 unit. 10. Mobile beer pump – 1 unit. 11. Wort aeration system – 1 unit. 12. Oil-free air compressor – 1 unit. 13. Glycol cooling system – 1 unit. 14. Hot water tank, stainless steel, double-walled with PU insulation – 1 unit. 15. Brewhouse ladder – 1 unit. 16. UNI tanks, 11 hl, double-walled, 100 mm PU-insulated, built-in cooling jackets, stainless steel 1.4301, 1.0 bar, built-in CIP – 6 units. 17. TÜV certification for the above 6 UNI tanks, with a nameplate on each. 18. Serving tank for finished beer, 3.0 bar, capacity 10 hl, stainless steel 1.4301, PU foam insulated, water-jacketed, horizontal on a frame – 4 units. 19. Electronic temperature control for each UNI and serving tank – 10 units. 20. Control cable with protective hose and screw connection for each UNI and serving tank – 10 units. 21. Full set of piping and fittings for installation on a single surface – 1 set. 22. Set including 1 beer hose (22 m) with fittings and a mini-laboratory. The brewery has a type approval from the Central Office of Measures in Warsaw. On request, we can arrange transportation of the brewery from Bucharest to any country of your choice and handle installation. We will gladly send you more photos, a presentation video of the brewery, and a profitability calculation for running your own brewpub via email.

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 900 W, with electronic defrosting, for continuous operation. Very quiet operation. Dehumidification capacity max. 50 l/24 h, air volume max. 265 m3/h. Electronic control unit with illuminated large control panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate container. In sturdy plastic housing with castors. In cardboard box. Dehumidification capacity: ≤ 50 l/24 h Iajdpfotty Raex Adwol Air volume: ≤ 265 m³/h

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Isdpfx Ajmt Dcfjdwjal Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Iaedeuy Thmjpfx Adwel Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. The offer is valid until 31.12.2024

Year of construction: 2025, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 95 kg Iedpfx Asmt Dcqodwsal Type and amount of refrigerant R410a, 650 g

Condition: new, REMS Orkan 2050. electric construction fan for commercial use. For ventilation of rooms, intermediate spaces, shafts, cavities and for ventilation and wind cooling of machines, marquees, event halls. To support air exchange in damp, musty cellars. Especially for accelerating the drying of e.g. concrete, masonry, plaster, screed. Condenser motor 230V, 50Hz, 145W, for continuous operation. Very quiet operation. Air volume 1740/2050m³/h. In sturdy plastic housing. In cardboard box. Iedpfx Ajtty Nnjdwjal Air volume: 2050 m³/g Motor: 230 V, 50 Hz, 145 W

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system Isdpfomt Dbhsx Adwoal The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.