Used Retail Scales for sale (2,273)

Condition: excellent (used), Year of construction: 2003, 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U - HD 1250 heating surface approx. : 20 qm boiler capacity max. : 1.250 kg/h working pressure : 16 bar increased test pressure : 28,8 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 2000 Dkedpfxot E Rntj Adkju equipped with Weishaupt-combined burner (oil/ gas) Typ GL5/1-D, ZD, 200-945 kW, oil throughput 20-79 kg/h, 15-500 mbar, fittings for gas supply, switch cabinet, feed water pump, and the existing small and large-scale fittings. Economizer: Eco 3, 65 kw, 31 bar, 238°C, 28 ltr, 8,5 m².

Condition: new, cutting diameter 240 mm saw band length 2730 mm cutting width 270 mm cutting speed 37 + 74 m/min dimensions of saw-band 2730 x 27 x 0,90 mm 240 mm 230 mm 270 x 230 mm 210 mm 200 mm 200 x 210 mm 130 mm 130 mm 130 x 160 mm total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution * High-quality processed and equipped metal band saw for saw cuts best quality * For sawing solid material and profiles made of steel, stainless steel and aluminium * Miter cuts up to 60 degrees left * Saw band speed adjustable in 2 stages * Frame and gearbox made from one piece, very quiet and low-vibration cut * Easy, clear miter adjustment with scale * Quick release vice with quick release lever for easy handling * Length stop * Carbide saw band guide * Electrical monitoring of band tension, band breakage and saw band cover. Djdpfxohhzl Ho Adksku The saw only runs if there is no fault in the monitoring system. * Ergonomic industrial handle * Electric automatic coolant control * AutoCut system with hydraulic cylinder, feed control, spring pack and limit switch * Large machine bed * Machine base in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via the hydraulic cylinder continuously adjustable feed and limit switch at the end of the cut. * High-speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed (e.g. for scribing). * Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). Due to the brake cylinder, the saw can be moved in any Position to be positioned.

Condition: new, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 6356, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,600 mm, MACHINE CONFIGURATION GENERAL SPECIFICATIONS TRAVERSES - Longitudinal traverse     8.000 mm - Vertical traverse     3.200 mm - Cross traverse     1.600 mm C0 Axes configuration in the machine: Longitudinal traverse X Vertical traverse Y Cross traverse Z Milling head zero position (0,0) Spindle parallel to Z REMARK: In case that the customer wants to modify this standard, option C0B must be selected before machine is launched into production. MACHINE ACCURACY Positioning A (according to ISO 230-2) ▪Longitudinal traverse 8.000 mm 0,023 mm ▪Vertical traverse 3.200 mm 0,013 mm ▪Cross traverse 1.600 mm 0,010 mm Repeatability R (according to ISO 230-2) ▪Longitudinal traverse 8.000 mm 0,018 mm ▪Vertical traverse 3.200 mm 0,010 mm ▪Cross traverse 1.600 mm 0,008 mm MEASURING SYSTEM LE_H Absolute linear scales: Manufacturer Heidenhain Axes X / Y / Z Sealing Compressed air Precision ±0,005 mm AUTOMATIC SLIDE FEEDS ▪Number of feeds as per ISO R-229 Stepless adjustable ▪Rapid Feed: Longitudinal axis 35.000 mm/min Vertical axis 35.000 mm/min Cross axis 35.000 mm/min ▪Acceleration rate (instantaneous, not maximum): Longitudinal axis 1 m/s² Vertical axis 1,5 m/s² Cross axis 2 m/s² NC17 Digital drive axis servomotors Heidenhain ▪Feed servomotors torque (M0):  Longitudinal axis (double pinion) 2 x 26,1 Nm Vertical axis 47,6 Nm Cross axis 47,6 Nm ▪Working feed force (X-Y-Z axes) 20.000 N MACHINE MEASUREMENTS ▪Approx. length (L) 13.790 mm ▪Approx. height (H) 6.640 mm ▪Approx. width (W) 3.850 mm ▪Ram section and clearance diameter 480 x 500 mm / Ø 695 mm MAIN SPINDLE AD43 Spindle motor: H Manufacturer Heidenhain Power (S1-100% / S6-60%) 43 / 49 kW Dsdpfxoxcnk Tj Adkjku T900 Maximum torque available (S1-100% / S6-60%) 900 / 1.045 Nm Type Direct Drive Location Inside RAM Cooling system Coolant HEADS H94E MACHINE PREPARATION FOR FUTURE INSTALLATION OF AUTOMATIC HEAD CHANGING SYSTEM ▪Mechanical preparation for code H94D (with adapter flanges). ▪Head is fixed or changed in the machine manually (not automatically) with bolts. ▪To be acquired for full automatic head changing system: Additional heads (with its own adapter flanges). Pick-up station for heads. ▪Modifications on the ram for full automatic head changing system: Substitution of the adapter flange. Bolts in the ram will be substituted by hydraulic clamping cylinders (PLC activated). Electrovalves and hydraulic installation. H41 ORTHOGONAL INDEXING HEAD ▪Indexing positioning (Hirth coupling): Vertical joint (±360º) 1º Horizontal joint (±135º) 1º Indexing accuracy ±1” Joint clamping / unclamping Hydraulic Permissible tangential moment 13.250 Nm Each joint equips its own encoder to control rotation. ▪Tool spindle: Lubrication Refrigerated oil Bearings Angular contact Automatic tool clamping / unclamping Mechanical / hydraulic Sealing (nose) Air pressured labyrinth ▪Power transmission: Gear ratio 1:1 Lubrication Cooled oil Gears Klingelnberg teeth spiral bevel gears ▪Air blowing for taper cleaning purposes while automatic tool changing.

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Manufacturer: Hess Type: Export Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Weight: 1,060 kg Hess Corpus Press Export, pneumatic 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Djdpfx Adoxgvwpokjku Anodized measuring scales, detachable feet Location: Ex works customer site - Immediately available -

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 5,141 h, load capacity: 8,000 kg, lifting height: 4,700 mm, free lift: 1,900 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,400 mm, motor manufacturer: G.M., gearing type: hydrostat, fork length: 1,500 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 400/60-15, overall weight: 20,500 kg, empty load weight: 12,500 kg, total height: 2,650 mm, total length: 2,700 mm, total width: 2,800 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, -- USED FORKLIFTS WITH GUARANTEED QUALITY – FT LOGISTICS -- 🔧 Years of experience | 🛠️ In-house service & paint shop | 🤝 Expert advice | 🚛 Own transport | 🧰 After-sales support Are you looking for a forklift you can genuinely rely on? We are a trusted dealer of used forklifts with a longstanding reputation. We serve customers across Europe – from small businesses to large-scale industrial facilities. Our machines are more than just equipment – they guarantee your logistics operate smoothly and reliably. 🔹 What makes us different? ✅ Every forklift undergoes a comprehensive technical inspection (full check, testing, oil & filter changes, overhaul of key components) ✅ Full UDT (Technical Supervision Office) certification available upon request ✅ In-house paint shop and service center – machines are professionally refurbished both visually and technically Dsdpfxsxg Txwo Adksku ✅ Europe-wide delivery, handled by our own qualified drivers ✅ Operator training on delivery + on-site functional demonstration ✅ Technical and maintenance support after purchase – we’re here for you even after the sale ✅ Viewing and testing of machines at our headquarters – you’re always welcome! ✅ Hundreds of satisfied customers across Europe – join those who trust us ✅ Financing support – we cooperate with all leading leasing companies ✅ Invoice in EUR or PLN – according to your needs 🔹 CURRENT OFFER: COMBILIFT C8000 – 4-WAY FORKLIFT 📅 Year: 2019 ⏱️ Operating hours: 5141 h ⛽ Fuel: LPG (GAS) 💪 Capacity: 8000 kg 📏 Mast: Duplex – 4700 mm lift height + 1800 mm free lift ↔️ Side shift | Fork positioner | Heated cabin | 1500 mm forks 🛞 Solid rubber tyres – 100% condition 🔧 Technical condition: Excellent – after complete service ✨ Appearance: Clean, corrosion-free, ready-to-work 📐 Dimensions: Height (lowered): 2650 mm Total length: 2700 mm Width: 2800 mm Positioner width: 1600 mm Overall height: 3400 mm 🔹 Ideal for: 🏭 Warehouses with narrow aisles 🌲 Wood, steel, and pipe industries 📦 Handling long and oversized loads 🏗️ Indoor and outdoor use 🔹 OFFER & FINANCING: 💶 Price includes delivery to your location within the EU 💸 Financing available – even for start-ups! Fast leasing approval (within 2 hours!) 🧾 Invoice in EUR or PLN ✅ We cooperate with major leasing institutions – we are an authorised supplier 📞 Contact us to discover what true professional service means! FT Logistics – Quality you can count on. Service you can trust. 🚀🔧

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t Dksdjgvkc Nepfx Adkou The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: like new (used), Year of construction: 2018, Panhans Mortising Machine Type: 116/10 - Max. drilling depth: 145 mm - Max. drilling length: 240 mm - Height adjustment: 135 mm - Extraction nozzle diameter: 100 mm - Color: RAL 7035 Light Grey, RAL 5000 Violet Blue - Net weight approx. 200 kg Dkedpfx Ajxgu Tvodksu Robust German engineering Professional long-hole mortising and precise dowel drilling Fixed table, smooth-running mobile drill motor Mobility kit for increased flexibility Cast iron table 700 x 380 mm, thick-walled and highly ribbed Smooth, backlash-free cross-slide with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length restriction via adjustable side stops left and right Drill motor output 1.3 kW/1.8 HP with motor brake and convenient tool tray Including emergency stop button High-precision three-jaw drill chuck, clamping range 5 – 20 mm Dowel drilling system for row drilling with indexing roller: 16, 22, 25, and 32 mm, high-precision machined indexing, fixing via spring-loaded indexing bolt Detachable frame stop with index pin for positions: center, left, right CE-compliant GS certified Including additional special accessories: - Single-lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - Immediately available -

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,141 h, load capacity: 8,000 kg, lifting height: 4,700 mm, free lift: 1,900 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,400 mm, motor manufacturer: G.M., gearing type: hydrostat, fork length: 1,500 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 400/60-15, overall weight: 20,500 kg, empty load weight: 12,500 kg, total height: 2,650 mm, total length: 2,700 mm, total width: 2,800 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, -- USED FORKLIFTS WITH GUARANTEED QUALITY – FT LOGISTICS -- 🔧 Years of experience | 🛠️ In-house service & paint shop | 🤝 Expert advice | 🚛 Own transport | 🧰 After-sales support Are you looking for a forklift you can genuinely rely on? We are a trusted dealer of used forklifts with a longstanding reputation. We serve customers across Europe – from small businesses to large-scale industrial facilities. Our machines are more than just equipment – they guarantee your logistics operate smoothly and reliably. 🔹 What makes us different? ✅ Every forklift undergoes a comprehensive technical inspection (full check, testing, oil & filter changes, overhaul of key components) ✅ Full UDT (Technical Supervision Office) certification available upon request ✅ In-house paint shop and service center – machines are professionally refurbished both visually and technically ✅ Europe-wide delivery, handled by our own qualified drivers ✅ Operator training on delivery + on-site functional demonstration ✅ Technical and maintenance support after purchase – we’re here for you even after the sale ✅ Viewing and testing of machines at our headquarters – you’re always welcome! ✅ Hundreds of satisfied customers across Europe – join those who trust us ✅ Financing support – we cooperate with all leading leasing companies ✅ Invoice in EUR or PLN – according to your needs 🔹 CURRENT OFFER: COMBILIFT C8000 – 4-WAY FORKLIFT 📅 Year: 2019 ⏱️ Operating hours: 5141 h ⛽ Fuel: LPG (GAS) 💪 Capacity: 8000 kg 📏 Mast: Duplex – 4700 mm lift height + 1800 mm free lift ↔️ Side shift | Fork positioner | Heated cabin | 1500 mm forks 🛞 Solid rubber tyres – 100% condition 🔧 Technical condition: Excellent – after complete service ✨ Appearance: Clean, corrosion-free, ready-to-work 📐 Dimensions: Height (lowered): 2650 mm Total length: 2700 mm Width: 2800 mm Positioner width: 1600 mm Overall height: 3400 mm 🔹 Ideal for: 🏭 Warehouses with narrow aisles 🌲 Wood, steel, and pipe industries 📦 Handling long and oversized loads Dkedpfx Ajxg Trwjdkju 🏗️ Indoor and outdoor use 🔹 OFFER & FINANCING: 💶 Price includes delivery to your location within the EU 💸 Financing available – even for start-ups! Fast leasing approval (within 2 hours!) 🧾 Invoice in EUR or PLN ✅ We cooperate with major leasing institutions – we are an authorised supplier 📞 Contact us to discover what true professional service means! FT Logistics – Quality you can count on. Service you can trust. 🚀🔧

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M42 throat 360 mm bore stroke 200 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4 mm/U Dkjdsn Ea Twepfx Adksu spindle turning speed range 190 - 1900 U/min column diameter 175 mm table surface area 550 x 550 mm total power requirement 4 kW weight of the machine ca. 0,85 t dimensions of the machine ca. 2,2 x 0,7 x 1,3 m - large stepless speed range in 3 stages - mechanical speed adjustment with hand lever (model V) - electronic speed adjustment with frequency converter (model VE) - Front digital speed display - Gear lubrication by automatic oil pump “VE” - Machine base plate with integrated coolant device - Machine light - MGI rotating and tilting table - Advance and automatic retraction with electromagnetic clutch - Front hand wheel for fine adjustment of the manual feed - Scale with adjustable drilling depth - Automatic feed reversal when threading - automatic tool ejector - Electric controls integrated in the drill head - EMERGENCY STOP button - Switch for forward/reverse rotation - Height-adjustable chip protection disc with micro switch - CE marking

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm Dedpfx Adoibw Sxskoku - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: new, Year of construction: 2023, bore capacity in steel (diameter) 34 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm Dkedpfxjt U Sc Rs Adkju thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 1,3 table: 400 x 420 mm Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 2,3 x 0,6x 1,1 m Column drilling machines - V-belt drive with foot switch - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant device - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 20 mm speeds 2850 U/min range of angles 0 - 60 (stufenlos) ° weight of the machine ca. 19,5 kg Maximum chamfer width 20 mm + face machining Dedeppgcvjpfx Adkoku Designed for chamfering and deburring straight edges, for the so-called FACING - removing an unwanted layer of material on the Front side of the workpiece, which is created, for example, by flame cutting a sheet metal. Specially developed for the production of visible chamfers and weld preparations. Powerful electric drive for extreme Charges. * High performance motor * stepless adjustment of the working angle in the range of 0° - 60° * FACING - Edge processing at an angle of 0° to remove unwanted ones Layers of material after flame cutting * The unique mechanical scale to adjust the bevel width for higher precision * A very compact and ergonomic design for high work productivity * Circumferential protective frame against damage and versatile grip options * With the appropriate accessories, pipes from D= 150 mm can also be processed * Additional adjustable handle - Chamfer width (hypotenuse): 0 - 20 mm = 400 Mpa / 0 - 16 mm = 400 Mpa - Motor: 1100W

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional 750 Article no. 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Dodpfogvkfvjx Adksku Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Furnishing: - electric back gauge 750 mm - front support plates with ball rollers - Light barrier behind the machine - Hydraulic cutting adjustment - Cutting gap regulation via handwheel - LED cutting edge lighting - 1x side stop with scale 1500 mm - 1x freely movable foot switch Dsdpfsuagxpsx Adkoku - Operation manual

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Djdpfegvkfysx Adkoku Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: used, Year of construction: 1985, sheet width 2500 mm plate thickness 6 mm rear stop 750 mm down holder 16 Stk Dkodpfx Adet Sykqekou total power requirement 12 kW weight 5400 kg dimensions of the machine ca. 3000 x 1500 x 2000 mm Furnishing: - electric back gauge 750 mm - front support plates with ball rollers - Light barrier behind the machine - Hydraulic cutting adjustment - Cutting gap regulation via handwheel - LED cutting edge lighting - 1x side stop with scale 1500 mm - 1x freely movable foot switch - Operation manual

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° Dodpfotv Rgrjx Adksku * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Dsdpfeucgr Ijx Adkoku Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 3 mm speeds 3600 U/min range of angles 30 - 60 (stufenlos) ° weight of the machine ca. 31 kg dimensions of the machine ca. 530 x 420 x 410 mm Maximum bevel width of 3 mm - Mechanically adjustable bevel angle Dsdpjppgcrjfx Adkeku Designed for deburring and chamfering steel parts and workpieces. Processing of different materials. Solid and stable machine construction. * Scale for setting the processing depth * Security cover * Adjustable processing angle * For steel, stainless steel, aluminum and other materials * Precise, massive and overlong mechanical guide - Number of indexable inserts: 5 pieces (four-sided) - Feed: manual

Condition: new, bore capacity in steel (diameter) 34 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 1,3 table: 400 x 420 mm Drive Keilriemen Dsdpot U Scqjfx Adkeku total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 2,3 x 0,6x 1,1 m - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant system - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: used, Year of construction: 1973, sheet width 3100 mm Dsdpstzv T Tsfx Adkeku plate thickness 3 mm rear stop 1000 mm down holder 18 Stk cutting angle 0.5 - 1,0° 30° ° oil volume 150 l total power requirement 5,5 kW weight 4300 kg dimensions of the machine ca. 3800 x 1950 x 1600 mm Furnishing: - electric back gauge 750 mm - front support plates with ball rollers - Light barrier behind the machine - Hydraulic cutting adjustment - Cutting gap regulation via handwheel - LED cutting edge lighting - 1x side stop with scale 1500 mm - 1x freely movable foot switch - Operation manual

Condition: new, table length 3000 mm table width 1500 mm Dkodpfx Adogvkc Tokeu table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 913 kg 7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes Dksdpfx Adjgvkf Djkou - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. Dkodpfx Asgvkmrodkou • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: new, 0,6 t -- mm -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N Stop and clamping angle 500 G with turning angle left - Left stop 1x article no. 2-280165.N Stop and clamping angle 500 G with right angle of rotation - stop on the right - Cast / nitrided 4x article no. 2-280152.N Stop and clamping angle 300 G - nitrided - Left stop - nitrided 8x article no. 2-280651.1. Prism Ø 60 135 ° with screwed-in collar - aluminum - aluminum - M16 thread for e.g. B. Prism Extension Item No. 280649 16x article no. 2-280610.N Professional screw clamp - nitrided Dsdpfx Adsgvq Hlokeku - nitrided 6x article no. 2-280630.N Professional screw clamp 45 ° / 90 ° - nitrided - nitrided 4x article no. 2-280426.N Universal stop 300 - nitrided - 3 system holes - nitrided