Used Bench Scales for sale (4,886)

Condition: excellent (used), Double bench grinder Djdok Iwx Espfx Afpecc

Condition: used, This listing is for a Solent Scales Weight Set. Dcedpfx Afexxzbwopsc The unit is in full working condition and is ready for immediate release. Weight Range from 1g - 500g Supplied in wooden box

Condition: good (used), Marel Stainless Steel floor weighing scale Marel weigher indicator M2200-P02 Dcodex Il Ntopfx Afpec 110-230 Vac, 0.24-0.12 A Dimensions scale: 900 mm x 900 mm.

Condition: good (used), Floor weighing scale K-PZ Weigher indicator Type: KPZ 52E-9-1 Maximum weight: 300 kg Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Dsdpfxjx Hz Dqs Afpjcc Including ramp

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, 1 x ActionPac Scales & Automation single-head linear weigher with drop-through metal detector. Supplied with pneumatic foot-pedal for manual depositing. *PLEASE NOTE - THE LINEAR WEIGHER REQUIRES NEW CONTROL PANEL SCREEN* Syntron Magnetic Feeder - F-T01-A. Linear weigher: Model - ME109CM. Serial number - 4284. Dodexv A Itepfx Afpecc Date of manufacture - 2014. Weighing range - 28g to 2268g (typically). Feeding pan - smooth, for solid and small granular products. Electrical requirements - 1 phase. Metal detector: Model - IMD-I gravity drop-through. Aperture - 180mm diameter. Electrical requirements - 1 phase. Overall dimensions - 1420mm long x 975mm wide x 3200mm high. Previously used to weigh and pack coffee beans and granules. Cost of new control panel - $2,700 (quoted by manufacturer).

Condition: new, GEOMET-2000 flow bench for calibrating a variable nozzle turbocharger without shaft rotation. This flow bench can calibrate the geometry of vacuum, air and electronically controlled turbochargers. The equipment is adapted to the needs of workshops for repairing turbochargers of trucks and cars. It is also designed to work with large-sized or non-standard turbocharger designs; Flowbench GEOMET-2000 will allow a regular workshop to provide professional turbine repair services, thus gaining more customers. HIGHLIGHTS Adjusting the end stop position of the air flow control mechanism (variable geometry) will eliminate the "overblowing" effect, which is detrimental to the engine. Adjusting the length of the actuator rod to adjust the actuation timing of the air flow control mechanism. Evaluating the spring elasticity of the actuator for in-depth diagnostics of vacuum and pneumatic actuators. Checking the operation of the N75 valve for turbines with vacuum valve, which is involved in controlling the turbocharger on the vehicle. Tuning of electronically driven turbos is done by connecting to an external tester ATP-1000. Vertical position of the turbocharger and free working area - comfortable and efficient work with all types of turbochargers. KEY FEATURES • More than 6200 turbo references database • Creation of a test plan for a new turbine from the manufacturer. • All measurements are done in real time. • Calibration of the test bench before starting work • Automatic atmospheric pressure and temperature compensation • N75 valve testing function • Built-in blower pump to create a constant airflow Dcjdpfon E N E Eex Afpsc • Self-developed Turbo Test software. • Creation and printing of reports on the tuning process. • Quick turbine installation thanks to magnetic adapters • Self-diagnostics SPECIFICATIONS Maximum productivity of the vacuum pump 180 m3 Required pressure in the pneumatic system 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1190 х 520 х 1730 mm Weight 255 kg

Condition: used, Connection rating: 750 W // 400 V // 50 Hz Drilling capacity: 25 mm Spindle mount: MK 2 Dedpfx Afot Rmbyspecc

Condition: used, Technical details: bore capacity in steel (diameter): 16 mm throat: 190 mm bore stroke: 60 mm Distance spindle/table max.: 250 mm range of revolution per miute: 410 / 725 / 1100 / 1700 bei 4step U/min spindle taper MT: MK 2 table surface area: 155 x 155 mm vertical adjustment: Tisch/table = 180 mm table rotating: 360 ° base plate surface area: 175 x 175 mm distance spindle center to floor plate:: max. 360 mm column diameter: 70 mm machine weight ab.: 65 kg dimensions L x W x H: 0,6 x 0,3 x 0,85 m Drill sleeve equipped with drill chuck 1 - 16 mm Dodpfx Asu Id Dzofpocc table rotatable *

Condition: good (used), The parts basket is conveyed to the shaker, after which the parts are separated and filled into the packaging at the target weight. Altrimex weighing system. Weight per basket: 350 kg. Dcedpfoyhfu Iox Afpsc

Condition: new, Year of construction: 2026, Standard equipment: - Robust, high-quality, inclined rotation hood for easy reading of the speed - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control - Connection cable with SCHUKO plug (1.2 m) - Undervoltage release - Drill guard with electrical interlock - Thermal overload protection - Emergency stop push button Weight in kg: 44 Motor power kW: 0.45 Single-phase 230 V Speed rpm: 250–3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Throat 220 mm - Column diameter 70 mm - Usable table surface (W x D) 300 x 250 mm - T-slot size: 2 slots, distance 100 mm, slot dimensions width 14/26 mm - Spindle taper B16 - Speed display: Digital - Drilling depth display: Scale - Drilling depth stop: Quick-adjust stop ring - Feed: Manual Option DRILLING PACKAGE 1 – Price: €272 – Vice [felix] 2.0 80 – Quick-release drill chuck B16 1–13 mm (accuracy 0.17 mm) - FACTORY WARRANTY: 3 years - Free delivery including packaging Dcedpeihipzofx Afpoc NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! CALL AND REQUEST A QUOTE!

Condition: good (used), max. threading capacity up to M 6 with guide cartridge throat 130 mm drive power 0,55 kW dimensions L x W x H approx. 350 x 650 x 750 mm weight approx. 90 kg Accessories / special features: - Threaded guide cartridges: 1 x pitch 0.5 mm 1 x pitch 0.6 mm 1 x pitch 0.7 mm 2 x pitch 0.8 mm 1 x pitch 1.0 mm - Various adjustable working cycles such as: Automatic, foot operation Dcedpfx Afjnyh Tnopoc Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, bore capacity in steel (diameter) 23 mm throat 220 mm bore stroke 120 mm Number of revolutions 25 - 3.200 U/min distance Spindlenose and center of table 275 mm table surface area 300 x 355 mm Dedpfx Afoyfwunspecc T-slots 3x T - slots distance 120 mm column diameter 110 mm weight of the machine ca. ca. 120 kg dimensions of the machine ca. 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet

Condition: good (used), Year of construction: 1990, Spare Parts Package for CNC Boring Mill Dcsdsxr Dg Njpfx Afpoc Manufacturer: PFEIFER, Model: FK 105 CNC, Spindle Mount ISO 50, Year: 1990. 1. Complete ISO 50 Spindle Head 4. Ball screws with nuts for X-Y-Z-W axes.

Condition: ready for operation (used), Year of construction: 1970, Double sanding bench with tilting device Type:R20 1 H Grinding wheel diameter 200 mm. Dcsdpfxstwnxus Afpoc

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 Dcodpfoydi A Iex Afpjc -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. Dcjdpfx Asvtn Hmofpsc HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, spindle diameter: 130 mm, overall weight: 32,450 kg, year of last overhaul: 2014, The machine is in very good technical condition, equipped with a Heidenhain iTNC 530 CNC control system. Specifications: Spindle diameter: 130 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Dodjx Hfk Ispfx Afpecc Taper in spindle: ISO 50 Spindle extension: 1120 mm Horizontal spindle head extension: 450 mm Total installed motor power: 50 KVA Dimensions (L x W x H): 10100 x 4380 x 5250 mm Weight: 32,450 kg

Condition: good (used), functionality: fully functional, Year of construction: 2019, Pallet scale, very little used, load capacity 3 t Dcodpfxjxzp Dfe Afpoc

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, spindle speed (max.): 2,500 rpm, total width: 1,000 mm, table length: 1,120 mm, travel distance W-axis: 710 mm, quill diameter: 100 mm, year of last overhaul: 2025, The machine is in very good technical condition after modernization in 2025, connected and available for testing. Heidenhain iTNC 530 control system. Accessories: tools, clamping angles, workpiece probe. Dcedpexz E N Dofx Afpoc

Condition: like new (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,250 mm, table load: 5,000 kg, spindle diameter: 105 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 1,400 mm, table width: 1,400 mm, feed length W-axis: 630 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 2,500 rpm, quill diameter: 105 mm, year of last overhaul: 2025, The machine is in excellent technical condition after a complete mechanical overhaul. Equipped with a Heidenhain iTNC 530 control system. Djdpfjx E Uhasx Afpjcc

Condition: excellent (used), Stock number: 2919 Manufacturer: Wörner Machine number: 30187 Type / Model: B13S Drilling capacity: up to 10 mm Spindle holder: MK2 B16x2 Speed range: 540 to 2,500 rpm infinitely variable Stroke: 120 mm Projection: 250 mm Table support surface: 330 x 430 mm Head adjustment: 400 mm Machine footprint: 430 x 650 mm Distance table spindle nose min/max: 80 / 480 mm Total connection: kW Accessories/equipment: drill chuck Condition: very good Weight: 165 kg Dedpfx Asu Ic Tzofpecc Dimensions with table: 750 x 620 x 1,600 / 2,000 mm

Condition: used, Year of construction: 2000, Horizontal Boring Mill Manufacturer: TOS Dcedpfxjx A Ayij Afpsc Model: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC control: Heidenhain 426 Completely overhauled in 2022 Report available Travel (X/Y/Z): 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Clamping area: 1,800 x 1,600 mm Table load: 12 t Number of tool stations: 60 Spindle taper: SK 50 Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Heidenhain handwheel Telescopic guard fully refurbished with new wipers. Dimensions (LxWxH) approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 t 21126ä

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm Dsdpfx Aoya Iaqsfpocc - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: used, Drilling and Tapping Machine FLOTT Model TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Throat depth: 195 mm Quill stroke: 80 mm Table size: 275 x 200 mm Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power connection: 380 Volt, 50 Hz - Spindle speed selection via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the spindle - Drilling head height adjustment via crank and rack on the column - Tapping device with guide bush and selector for right- and left-hand threads - 3 guide bushes for right-hand threads: 0.7 mm, 0.8 mm, and 28G included - Tapping possible with or without guide bush - 1 geared drill chuck Ø 1.5 to 13 mm - Foot switch for cycle start Dcjdpfsdzp S Nox Afpjc - Emergency stop - Original metal base included Space requirements (L x W x H): 700 x 350 x 1850 mm Weight: 165 kg Good condition

Condition: good (used), Vise, bench vise, locksmith's vise, parallel vise, heavy-duty vise Dsdpfx Afsycfttjpocc -Manufacturer: ZS, solid vise -Clamping jaws: 150 x 25 mm -Wingspan: 215 mm -Dimensions: 440/170/H245 mm -Weight: 31.8 kg