Used Robodrill for sale (41)

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] Ksdsxcburepfx Aabsdu TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE - Tool probe : MIDEX BKS1S

Condition: used, _____ Description: Year of manuf. : 2022 Control : Fanuc 31i-B5 Speed : 24000 rpm Movement X/Y/Z : 700/400/400 mm Tool holder : BBT 30 Spindle: Technology:Directdrive Speed (max.):24.000 rpm Power (max.):26 kW Torque (max.):35 Nm Kdjdpsw E Ux Eefx Aabou Taper:BBT 30 Workingtable: Clampingsurface:850 x 410 mm Tableloading (max.):400 kg In general: Toolmagazine:21 Stations Rapid travers in X/Y/Z:54 m/min Equipment/Accessory: Automationpreparation:Automated Sidedoor (pneumatic) Further Equipment:Trafo

Condition: used, Year of construction: 2015, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm control: FANUC 31i B5 tool change unit: 21 fach rapid traverse in x-y-z axis: 54 m/min taper ISO: BT 30 turning speed range:: 10.000 1 / min spindle drive: 11 / 3,7 kW max. table load: 300 kg Kodpfjugpk Uex Aabedu surface area: 600x 400 mm Dimensions (L/W/H): 1,6 x 2,1 x 2,25 m rapid traverse: 48 m/min total power requirement: 11 kVA weight of the machine ca.: 2,1 t vertical CNC-milling-drilling machining center, Infrared Touch probe, el. handwheel, autom. door on right side, no internal Coolant Supply, Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run" *

Condition: used, Year of construction: 2005, General Information: - Model: ROBODRILL α-T2 STAMA - Serial Number: 046VH155 - Year of Manufacture: 2005 - CNC Controller: FANUC (Model A04B-0094-B111#BD) - Weight: 2200 kg - Power Supply: 200 V, 50/60 Hz, Three-phase - Power Consumption: 10 kVA ----- Kdedpfxjuru I Re Aabsu Machining Capabilities: - Operations: - Milling (high-speed and high-precision milling) - Drilling - Rigid tapping ----- Axis Travel: - X-axis Travel: ~500 mm - Y-axis Travel: ~400 mm - Z-axis Travel: ~330 mm ----- Spindle: - Spindle Taper: BT30 - Standard Spindle Speed: up to 10,000 rpm ----- Tool Changer: - Type: Automatic tool changer - Tool Change Time: ~1.6 seconds ----- Rapid Traverse Rate: - Rapid Traverse Speed: 54 m/min on X, Y, and Z axes ----- Key Features: - Compact structure for high rigidity - High productivity with ultra-fast drilling and tapping cycles - Easy maintenance (integrated FANUC diagnostic interface) - Compatibility with automated production cells (co-branding with STAMA)

Condition: ready for operation (used), Travel X/Y/Z: 500mm/380mm/300mm, table dimensions X/Y: 650mm/380mm, speed: 8000rpm, spindle taper: BT30, tool positions: 14, spindle power: 7.5PS, max. table load: 200kg. Dimensions X/Y/Z: approx. 1600mm/1900mm/2300mm, weight: approx. 2000kg, control: Fanuc Series 16i-M. Defects: Range switch of the tool changer and relay of the Z-axis brake. Kdsdpjtyynmsfx Aabju

Condition: used, Year of construction: 2001, functionality: unexamined, 5 - available, see descriptions below Fanuc Robodrill a-T14iA vertical machining centre Serial no: P99XTH631 (10/1999) with Fanuc Series 16i-M control, 14 station ATC Fanuc Robodrill a-T14iA vertical machining centre Serial no: P99XTH633 (10/1999) with Fanuc Series 16i-M control, 14 station ATC, 4th axis trunnion table Fanuc Robodrill a-T14iA vertical machining centre Serial no: P984TH563 (04/1998) with Fanuc Series 16i-M control, 14 station ATC, 4th axis trunnion table" Kdsdpfx Ajw U U Nueabju Fanuc Robodrill a-T14iA vertical machining centre Serial no: P99XTH639 (10/1999) with Fanuc Series 16i-M control, 14 station ATC, 4th axis trunnion table Fanuc Robodrill a-T14iA vertical machining centre Serial no: P99XTH640 (10/1999) with Fanuc Series 16i-M control, 14 station ATC, 4th axis trunnion table

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] Kdjdpfxjxcbuls Aabju - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : Gauche - Tool probe : BLUM Z NANO

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Fanuc Robodrill T14iA Vertical Machining Centre for sale. 1998 model with 8,000 rpm spindle and 14 tool ATC. SPECIFICATION Traverses X Axis 500mm Y Axis 380mm Z Axis 300mm Spindle Nose to Worktable Minimum 250mm Maximum 550mm Work Table Table working surface 650 x 400mm Table loading capacity (uniform load) 200kg Table surface configuration Number of T slots 3 Width 14mm Pitch 125mm Machine Dimensions Width 1550mm Depth 1900mm Height (min/max) 2067 / 2367mm Weight (approximately) 2100kg Spindle Speed range 100 – 8,000rpm Taper BT30 Feedrates Rapid traverse rate 48m/min Kjdsnq Dguepfx Aabsdu Feedrate 1 – 30,000mm/min Toolchanger ( MAS BT30 Tools) Tool storage capacity 14 tools Tool change time – cut to cut 0.9 secs (2kg) Tool Diameter 80mm Tool Length 200mm Tool Weight 2Kg Coolant tank capacity 100 litres CNC Control System Fanuc Series 16iM Electrical Supply 415V, 3 ph , 50Hz Compressed Air Supply 5kgf/cm2 (100 litres/min) MACHINE EQUIPPED WITH:- Coolant system Lighting Enclosed guarding

Condition: excellent (used), Year of construction: 2015, operating hours: 4,500 h, functionality: fully functional, travel distance X-axis: 700 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: fanuc, controller model: 31i model B5, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,500 h, spindle nose: BT 30 big plus, number of slots in tool magazine: 21, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FULL OPTIONAL TAPPING CENTER high torque/power version, complete with: spindle cone with BIG PLUS attachment FANUC DDR-T: continuous fourth axis (direct drive motor) with braked counter support and plate rotary joint for hydraulic feed to center table (for automatic workpiece clamping/unclamping) Kodpfouby Sxjx Aabedu hydraulic power unit for workpiece clamping high-pressure refrigeration through the spindle chip conveyor evacuation automatic side poet robot interface tool setter RENISHAW TS-27 perfect machine with only 4,500 spindle hours!

Condition: ready for operation (used), Year of construction: 2004, TECHNICAL DATA Brand: FANUC Model ROBODRILL α-T21iDL Year: 2004 Numerical control: FANUC Series 16i-MB Serial number: 04XUP741 TABLE DIMENSIONS Table dimension: 850 x 410 mm. Load capacity: 250 Kg. Slot spacing: 125 mm. Slots: 3-14 mm. TRAVELS Longitudinal travel X: 700 mm. Longitudinal travel Y: 400 mm. Vertical travel Z: 300 mm. Distance from table to edge of spindle: 150 to 480 mm. FEEDS Rapid feed X,Y,Z: 54,000 mm/min. Working feed: 1 to 30,000 mm/min. MOTOR Drive motor: 5.5kW at 10 min rating/3.7kW X,Y,Z feed motors: α8/4,000is (2.9 kW) TURRET Taper: MAS BT 30 Kodpfxovvlfre Aabodu Tie-rod type: MAS P30T-1 (45º) Distance from column to spindle centre line: 400 mm. ACCURACY Positioning accuracy: 0.006 mm. / 300 mm. Repeatability accuracy: ±0.002 mm. Tool storage: 21 Maximum tool length: 250 mm. Tool change time: Approx. 1.8 s. HEAD Spindle speed range: 100 to 10,000 min-1 Spindle taper bore type: 400 mm. MACHINE SIZE Machine height: 2,236 ± 10 mm. Floor space: 2,115 x 2,015 mm. Machine weight with control section: Approx. 2,100 Kg. POWER SOURCES Electric power supply: 11kVa. Compressed air supply: 0.35 to 0.55 MPa (gauge pressure) (0.5 MPa recommended) 0.15 m3/min (150l/min) (at atmospheric pressure) ACCESSORIES Tsudakoma 5-axis indexer model TTNC-102

Condition: used, TECHNICAL DETAILS - Number of axes : 3 Kdedpfx Aasxcbufobeu MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : CENTRE - Tool probe : BLUM Z NANO

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] Kodpfx Aasxcbt Uebsdu - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE - Tool probe : BLUM Z NANO

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [mm/min] - Cutting feed rates (X/Y/Z) : 1 - 30.000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250 - 580 [mm] POWER SUPPLY Kdsdswzm Nzepfx Aabou - Supply voltage : 380 [V] - Total installed power : 11 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1565 x 2027 [mm] - Machine height : 2325 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Machine 1 : Number of hours under power : 30.387 [h] - Machine 2 : Number of hours under power : 29.548 [h] - Machine 1 : Number of working hours : 10.795 [h] - Machine 2 : Number of working hours : 10.006 [h] EQUIPMENT - CNC : Fanuc 31i-Model B5 - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : LEHMANN * model : Serie 500 Edition 4 - Coolant tank * with high-pressure pump * with paper filtering unit * with cooling unit for coolant - Coolant through spindle - Workpiece loading / unloading robot - Chips conveyor : ARRIERE - Tool probe : BLUM - Workpiece probe : BLUM - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30.000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2325 [mm] Kedpfjwxy Ifox Aabjdu - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 30387 [h] - Number of working hours : 22055 [h] EQUIPMENT - CNC : Fanuc 31i-Model B5 - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : LEHMANN * model : Serie 500 Edition 4 - Coolant tank * with high-pressure pump * with paper filtering unit * with cooling unit for coolant - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : BLUM - Workpiece probe : BLUM - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] Kdjdpfxjwxy Ils Aabeu - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30.000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2325 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 29548 [h] EQUIPMENT - CNC : Fanuc 31i-Model B5 - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : LEHMANN * model : Serie 500 Edition 4 - Coolant tank * with high-pressure pump * with paper filtering unit * with cooling unit for coolant - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : BLUM - Workpiece probe : BLUM - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: E183001165, overall weight: 250 kg, Robot in very good condition, integrated into a Fanuc Robodrill machining center with an automated door (sold separately). Kodpfx Ajxnh Ezeabodu